An experiment in mixed compilation/interpretation

One of the classic forms of intermediate representation used for communication between compiler front-ends and back-ends are those based on abstract stack machines. It is possible to compile the stack machine instructions into machine code by means of an interpretive code generator, or to simulate the stack machine at runtime using an interpreter. This paper describes an approach intermediate between these two extremes. The front-end for a commercial Modula 2 compiler was ported to the "industry standard PC", and a partially compiling back-end written. The object code runs with the assistance of an interpreter, but may be linked with libraries which are fully compiled. The intent was to provide a programming environment on the PC which is identical to that of the same compilers on 32-bit UNIX machines. This objective has been met, and the compiler is available to educational institutions as free-ware. The design basis of the new compiler is described, and the performance critically evaluated.

Exploring Chinese consumer's perceptions of using new mobile technology : A qualitative study

This study examines the case of Chinese consumer's intention to adopt the upcoming mobile technology, 3G. The qualitative study involved 45 in-depth intervie3ws undertaken in three major Chemise cities to explore what perceptions, beliefs and attitudes will influence their decisions about adopting 3G. Perceived beliefs about using 3G technology were found to be important determinants. Additionally, there was evidence of influences from their social network that could motivate the adoption behaviour, as well as influence from the secondary information sources, such as the media and the Internet. Finally, some constraints were identifies that may inhibit Chinese consumers' adoption of this technology.

Evaluating the Java Virtual Machine as a Target for Languages Other Than Java

The portability and runtime safety of programs which are executed on the Java Virtual Machine (JVM) makes the JVM an attractive target for compilers of languages other than Java. Unfortunately, the JVM was designed with language Java in mind, and lacks many of the primitives required for a straighforward implementation of other languages. Here, we discuss how the JVM may be used to implement other object-oriented languages. As a practical example of the possibilities, we report on a comprehensive case study. The open source Gardens Point Component Pascal compiler compiles the entire Component Pascal language, a dialect of Oberon-2, to JVM bytecodes. This compiler achieves runtime efficiencies which are comparable to native-code implementations of procedural languages.

Implementing languages other than Java on the Java Virtual Machine

The portability and runtime safety of programs which are executed on the Java Virtual Machine (JVM) makes the JVM an attractive target for compilers of languages other than Java. Unfortunately, the JVM was designed with language Java in mind, and lacks many of the primitives required for a straight forward implementation of other languages. Here, we discuss how the JVM may be used to implement other object oriented languages. As a practical example of the possibilities, we report on a comprehensive case study. The open source Gardens Point Component Pascal compiler compiles the entire Component Pascal language, a dialect of Oberon 2, to JVM bytecodes. This compiler achieves runtime efficiencies which are comparable to native code implementations of procedural languages.

Leveraging managed frameworks from modular languages

Managed execution frameworks, such as the.NET Common Language Runtime or the Java Virtual Machine, provide a rich environment for the creation of application programs. These execution environments are ideally suited for languages that depend on type-safety and the declarative control of feature access. Furthermore, such frameworks typically provide a rich collection of library primitives specialized for almost every domain of application programming. Thus, when a new language is implemented on one of these frameworks it becomes necessary to provide some kind of mapping from the new language to the libraries of the framework. The design of such mappings is challenging since the type-system of the new language may not span the domain exposed in the library application programming interfaces (APIs). The nature of these design considerations was clarified in the implementation of the Gardens Point Component Pascal (gpcp) compiler. In this paper we describe the issues, and the solutions that we settled on in this case. The problems that were solved have a wider applicability than just our example, since they arise whenever any similar language is hosted in such an environment.

Reading and writing PE-files with PERWAPI

PERWAPI is a component for reading and writing .NET PE-files. The name is a compound acronym for Program Executable – Reader/Writer – Application Programming Interface. The code was written by one of us (Diane Corney) with some contributions from some of the early users of the tool. PERWAPI is a managed component, written entirely in safe C#. The design of the writer part of the component is loosely based on Diane Corney’s previous PEAPI component. It is open source software, and is released under a “FreeBSD-like” license. The source may be downloaded from “http://plas.fit.qut.edu.au/perwapi/” As of the date of this document the code has facilities for reading and writing PEfiles compatible with the latest (beta-2) release of the ”Whidbey” version of .NET, that is, the Visual Studio 2005 framework. An invocation option allows earlier versions of the framework to be targeted.

Recommending best answer in a collaborative question answering system

The World Wide Web has become a medium for people to share information. People use Web-based collaborative tools such as question answering (QA) portals, blogs/forums, email and instant messaging to acquire information and to form online-based communities. In an online QA portal, a user asks a question and other users can provide answers based on their knowledge, with the question usually being answered by many users. It can become overwhelming and/or time/resource consuming for a user to read all of the answers provided for a given question. Thus, there exists a need for a mechanism to rank the provided answers so users can focus on only reading good quality answers. The majority of online QA systems use user feedback to rank users’ answers and the user who asked the question can decide on the best answer. Other users who didn’t participate in answering the question can also vote to determine the best answer. However, ranking the best answer via this collaborative method is time consuming and requires an ongoing continuous involvement of users to provide the needed feedback. The objective of this research is to discover a way to recommend the best answer as part of a ranked list of answers for a posted question automatically, without the need for user feedback. The proposed approach combines both a non-content-based reputation method and a content-based method to solve the problem of recommending the best answer to the user who posted the question. The non-content method assigns a score to each user which reflects the users’ reputation level in using the QA portal system. Each user is assigned two types of non-content-based reputations cores: a local reputation score and a global reputation score. The local reputation score plays an important role in deciding the reputation level of a user for the category in which the question is asked. The global reputation score indicates the prestige of a user across all of the categories in the QA system. Due to the possibility of user cheating, such as awarding the best answer to a friend regardless of the answer quality, a content-based method for determining the quality of a given answer is proposed, alongside the non-content-based reputation method. Answers for a question from different users are compared with an ideal (or expert) answer using traditional Information Retrieval and Natural Language Processing techniques. Each answer provided for a question is assigned a content score according to how well it matched the ideal answer. To evaluate the performance of the proposed methods, each recommended best answer is compared with the best answer determined by one of the most popular link analysis methods, Hyperlink-Induced Topic Search (HITS). The proposed methods are able to yield high accuracy, as shown by correlation scores: Kendall correlation and Spearman correlation. The reputation method outperforms the HITS method in terms of recommending the best answer. The inclusion of the reputation score with the content score improves the overall performance, which is measured through the use of Top-n match scores.

Structural health monitoring of bridges using acoustic emission technology

Bridges are an important part of society's infrastructure and reliable methods are necessary to monitor them and ensure their safety and efficiency. Bridges deteriorate with age and early detection of damage helps in prolonging the lives and prevent catastrophic failures. Most bridges still in used today were built decades ago and are now subjected to changes in load patterns, which can cause localized distress and if not corrected can result in bridge failure. In the past, monitoring of structures was usually done by means of visual inspection and tapping of the structures using a small hammer. Recent advancements of sensors and information technologies have resulted in new ways of monitoring the performance of structures. This paper briefly describes the current technologies used in bridge structures condition monitoring with its prime focus in the application of acoustic emission (AE) technology in the monitoring of bridge structures and its challenges.

Virtual mooting : using technology to enhance the mooting experience

While a range of benefits to students participating in mooting have been identified by the legal education literature, there are impediments to students participating in mooting that have been revealed by recent surveys of law students at QUT. These impediments include time, geographical location and a failure to perceive the benefits of mooting. This paper will explore the benefits of using technology to overcome these impediments, evaluate technological options to facilitate distance mooting, such as the use of Second Life, Elluminate and video conferencing, and will recommend a trial of these options.

Building partnerships as a key strategy in developing an event management model for an international dance event : a case study of the 2008 WDA (World Dance Alliance) Global Summit, Brisbane, Australia

With the increasing growth of cultural events both in Australia and internationally, there has also been an increase in event management studies; in theory and in practice. Although a series of related knowledge and skills required specifically by event managers has already been identified by many researchers (Perry et al., 1996; Getz, 2002 & Silvers et al., 2006) and generic event management models proposed, including ‘project management’ strategies in an event context (Getz, 2007), knowledge gaps still exist in relation to identifying specific types of events, especially for not-for-profit arts events. For events of a largely voluntary nature, insufficient resources are recognised as the most challenging; including finance, human resources and infrastructure. Therefore, the concepts and principles which are adopted by large scale commercial events may not be suitable for not-for-profit arts events aiming at providing professional network opportunities for artists. Building partnerships are identified as a key strategy in developing an effective event management model for this type of event. Using the 2008 World Dance Alliance Global Summit (WDAGS) in Brisbane 13-18 July, as a case study, the level, nature and relationship of key partners are investigated. Data is triangulated from interviews with organisers of the 2008 WDAGS, on-line and email surveys of delegates, participant observation and analysis of formal and informal documents, to produce a management model suited to this kind of event.

Peripheral ocular monochromatic aberrations

Aberrations affect image quality of the eye away from the line of sight as well as along it. High amounts of lower order aberrations are found in the peripheral visual field and higher order aberrations change away from the centre of the visual field. Peripheral resolution is poorer than that in central vision, but peripheral vision is important for movement and detection tasks (for example driving) which are adversely affected by poor peripheral image quality. Any physiological process or intervention that affects axial image quality will affect peripheral image quality as well. The aim of this study was to investigate the effects of accommodation, myopia, age, and refractive interventions of orthokeratology, laser in situ keratomileusis and intraocular lens implantation on the peripheral aberrations of the eye. This is the first systematic investigation of peripheral aberrations in a variety of subject groups. Peripheral aberrations can be measured either by rotating a measuring instrument relative to the eye or rotating the eye relative to the instrument. I used the latter as it is much easier to do. To rule out effects of eye rotation on peripheral aberrations, I investigated the effects of eye rotation on axial and peripheral cycloplegic refraction using an open field autorefractor. For axial refraction, the subjects fixated at a target straight ahead, while their heads were rotated by ±30º with a compensatory eye rotation to view the target. For peripheral refraction, the subjects rotated their eyes to fixate on targets out to ±34° along the horizontal visual field, followed by measurements in which they rotated their heads such that the eyes stayed in the primary position relative to the head while fixating at the peripheral targets. Oblique viewing did not affect axial or peripheral refraction. Therefore it is not critical, within the range of viewing angles studied, if axial and peripheral refractions are measured with rotation of the eye relative to the instrument or rotation of the instrument relative to the eye. Peripheral aberrations were measured using a commercial Hartmann-Shack aberrometer. A number of hardware and software changes were made. The 1.4 mm range limiting aperture was replaced by a larger aperture (2.5 mm) to ensure all the light from peripheral parts of the pupil reached the instrument detector even when aberrations were high such as those occur in peripheral vision. The power of the super luminescent diode source was increased to improve detection of spots passing through the peripheral pupil. A beam splitter was placed between the subjects and the aberrometer, through which they viewed an array of targets on a wall or projected on a screen in a 6 row x 7 column matrix of points covering a visual field of 42 x 32. In peripheral vision, the pupil of the eye appears elliptical rather than circular; data were analysed off-line using custom software to determine peripheral aberrations. All analyses in the study were conducted for 5.0 mm pupils. Influence of accommodation on peripheral aberrations was investigated in young emmetropic subjects by presenting fixation targets at 25 cm and 3 m (4.0 D and 0.3 D accommodative demands, respectively). Increase in accommodation did not affect the patterns of any aberrations across the field, but there was overall negative shift in spherical aberration across the visual field of 0.10 ± 0.01m. Subsequent studies were conducted with the targets at a 1.2 m distance. Young emmetropes, young myopes and older emmetropes exhibited similar patterns of astigmatism and coma across the visual field. However, the rate of change of coma across the field was higher in young myopes than young emmetropes and was highest in older emmetropes amongst the three groups. Spherical aberration showed an overall decrease in myopes and increase in older emmetropes across the field, as compared to young emmetropes. Orthokeratology, spherical IOL implantation and LASIK altered peripheral higher order aberrations considerably, especially spherical aberration. Spherical IOL implantation resulted in an overall increase in spherical aberration across the field. Orthokeratology and LASIK reversed the direction of change in coma across the field. Orthokeratology corrected peripheral relative hypermetropia through correcting myopia in the central visual field. Theoretical ray tracing demonstrated that changes in aberrations due to orthokeratology and LASIK can be explained by the induced changes in radius of curvature and asphericity of the cornea. This investigation has shown that peripheral aberrations can be measured with reasonable accuracy with eye rotation relative to the instrument. Peripheral aberrations are affected by accommodation, myopia, age, orthokeratology, spherical intraocular lens implantation and laser in situ keratomileusis. These factors affect the magnitudes and patterns of most aberrations considerably (especially coma and spherical aberration) across the studied visual field. The changes in aberrations across the field may influence peripheral detection and motion perception. However, further research is required to investigate how the changes in aberrations influence peripheral detection and motion perception and consequently peripheral vision task performance.

A study into the permeability and compressibility of Australian bagasse pulp

This is an experimental study into the permeability and compressibility properties of bagasse pulp pads. Three experimental rigs were custom-built for this project. The experimental work is complemented by modelling work. Both the steady-state and dynamic behaviour of pulp pads are evaluated in the experimental and modelling components of this project. Bagasse, the fibrous residue that remains after sugar is extracted from sugarcane, is normally burnt in Australia to generate steam and electricity for the sugar factory. A study into bagasse pulp was motivated by the possibility of making highly value-added pulp products from bagasse for the financial benefit of sugarcane millers and growers. The bagasse pulp and paper industry is a multibillion dollar industry (1). Bagasse pulp could replace eucalypt pulp which is more widely used in the local production of paper products. An opportunity exists for replacing the large quantity of mainly generic paper products imported to Australia. This includes 949,000 tonnes of generic photocopier papers (2). The use of bagasse pulp for paper manufacture is the main application area of interest for this study. Bagasse contains a large quantity of short parenchyma cells called ‘pith’. Around 30% of the shortest fibres are removed from bagasse prior to pulping. Despite the ‘depithing’ operations in conventional bagasse pulp mills, a large amount of pith remains in the pulp. Amongst Australian paper producers there is a perception that the high quantity of short fibres in bagasse pulp leads to poor filtration behaviour at the wet-end of a paper machine. Bagasse pulp’s poor filtration behaviour reduces paper production rates and consequently revenue when compared to paper production using locally made eucalypt pulp. Pulp filtration can be characterised by two interacting factors; permeability and compressibility. Surprisingly, there has previously been very little rigorous investigation into neither bagasse pulp permeability nor compressibility. Only freeness testing of bagasse pulp has been published in the open literature. As a result, this study has focussed on a detailed investigation of the filtration properties of bagasse pulp pads. As part of this investigation, this study investigated three options for improving the permeability and compressibility properties of Australian bagasse pulp pads. Two options for further pre-treating depithed bagasse prior to pulping were considered. Firstly, bagasse was fractionated based on size. Two bagasse fractions were produced, ‘coarse’ and ‘medium’ bagasse fractions. Secondly, bagasse was collected after being processed on two types of juice extraction technology, i.e. from a sugar mill and from a sugar diffuser. Finally one method of post-treating the bagasse pulp was investigated. The effects of chemical additives, which are known to improve freeness, were also assessed for their effect on pulp pad permeability and compressibility. Pre-treated Australian bagasse pulp samples were compared with several benchmark pulp samples. A sample of commonly used kraft Eucalyptus globulus pulp was obtained. A sample of depithed Argentinean bagasse, which is used for commercial paper production, was also obtained. A sample of Australian bagasse which was depithed as per typical factory operations was also produced for benchmarking purposes. The steady-state pulp pad permeability and compressibility parameters were determined experimentally using two purpose-built experimental rigs. In reality, steady-state conditions do not exist on a paper machine. The permeability changes as the sheet compresses over time. Hence, a dynamic model was developed which uses the experimentally determined steady-state permeability and compressibility parameters as inputs. The filtration model was developed with a view to designing pulp processing equipment that is suitable specifically for bagasse pulp. The predicted results of the dynamic model were compared to experimental data. The effectiveness of a polymeric and microparticle chemical additives for improving the retention of short fibres and increasing the drainage rate of a bagasse pulp slurry was determined in a third purpose-built rig; a modified Dynamic Drainage Jar (DDJ). These chemical additives were then used in the making of a pulp pad, and their effect on the steady-state and dynamic permeability and compressibility of bagasse pulp pads was determined. The most important finding from this investigation was that Australian bagasse pulp was produced with higher permeability than eucalypt pulp, despite a higher overall content of short fibres. It is thought this research outcome could enable Australian paper producers to switch from eucalypt pulp to bagasse pulp without sacrificing paper machine productivity. It is thought that two factors contributed to the high permeability of the bagasse pulp pad. Firstly, thicker cell walls of the bagasse pulp fibres resulted in high fibre stiffness. Secondly, the bagasse pulp had a large proportion of fibres longer than 1.3 mm. These attributes helped to reinforce the pulp pad matrix. The steady-state permeability and compressibility parameters for the eucalypt pulp were consistent with those found by previous workers. It was also found that Australian pulp derived from the ‘coarse’ bagasse fraction had higher steady-state permeability than the ‘medium’ fraction. However, there was no difference between bagasse pulp originating from a diffuser or a mill. The bagasse pre-treatment options investigated in this study were not found to affect the steady-state compressibility parameters of a pulp pad. The dynamic filtration model was found to give predictions that were in good agreement with experimental data for pads made from samples of pretreated bagasse pulp, provided at least some pith was removed prior to pulping. Applying vacuum to a pulp slurry in the modified DDJ dramatically reduced the drainage time. At any level of vacuum, bagasse pulp benefitted from chemical additives as quantified by reduced drainage time and increased retention of short fibres. Using the modified DDJ, it was observed that under specific conditions, a benchmark depithed bagasse pulp drained more rapidly than the ‘coarse’ bagasse pulp. In steady-state permeability and compressibility experiments, the addition of chemical additives improved the pad permeability and compressibility of a benchmark bagasse pulp with a high quantity of short fibres. Importantly, this effect was not observed for the ‘coarse’ bagasse pulp. However, dynamic filtration experiments showed that there was also a small observable improvement in filtration for the ‘medium’ bagasse pulp. The mechanism of bagasse pulp pad consolidation appears to be by fibre realignment. Chemical additives assist to lubricate the consolidation process. This study was complemented by pulp physical and chemical property testing and a microscopy study. In addition to its high pulp pad permeability, ‘coarse’ bagasse pulp often (but not always) had superior physical properties than a benchmark depithed bagasse pulp.

Translation and news making : a study of contemporary arabic television

Arabic satellite television has recently attracted tremendous attention in both the academic and professional worlds, with a special interest in Aljazeera as a curious phenomenon in the Arab region. Having made a household name for itself worldwide with the airing of the Bin Laden tapes, Aljazeera has set out to deliberately change the culture of Arabic journalism, as it has been repeatedly stated by its current General Manager Waddah Khanfar, and to shake up the Arab society by raising awareness to issues never discussed on television before and challenging long-established social and cultural values and norms while promoting, as it claims, Arab issues from a presumably Arab perspective. Working within the meta-frame of democracy, this Qatari-based network station has been received with mixed reactions ranging from complete support to utter rejection in both the west and the Arab world. This research examines the social semiotics of Arabic television and the socio-cultural impact of translation-mediated news in Arabic satellite television, with the aim to carry out a qualitative content analysis, informed by framing theory, critical linguistic analysis, social semiotics and translation theory, within a re-mediation framework which rests on the assumption that a medium “appropriates the techniques, forms and social significance of other media and attempts to rival or refashion them in the name of the real" (Bolter and Grusin, 2000: 66). This is a multilayered research into how translation operates at two different yet interwoven levels: translation proper, that is the rendition of discourse from one language into another at the text level, and translation as a broader process of interpretation of social behaviour that is driven by linguistic and cultural forms of another medium resulting in new social signs generated from source meaning reproduced as target meaning that is bound to be different in many respects. The research primarily focuses on the news media, news making and reporting at Arabic satellite television and looks at translation as a reframing process of news stories in terms of content and cultural values. This notion is based on the premise that by its very nature, news reporting is a framing process, which involves a reconstruction of reality into actualities in presenting the news and providing the context for it. In other words, the mediation of perceived reality through a media form, such as television, actually modifies the mind’s ordering and internal representation of the reality that is presented. The research examines the process of reframing through translation news already framed or actualized in another language and argues that in submitting framed news reports to the translation process several alterations take place, driven by the linguistic and cultural constraints and shaped by the context in which the content is presented. These alterations, which involve recontextualizations, may be intentional or unintentional, motivated or unmotivated. Generally, they are the product of lack of awareness of the dynamics and intricacies of turning a message from one language form into another. More specifically, they are the result of a synthesis process that consciously or subconsciously conforms to editorial policy and cultural interpretive frameworks. In either case, the original message is reproduced and the news is reframed. For the case study, this research examines news broadcasts by the now world-renowned Arabic satellite television station Aljazeera, and to a lesser extent the Lebanese Broadcasting Corporation (LBC) and Al- Arabiya where access is feasible, for comparison and crosschecking purposes. As a new phenomenon in the Arab world, Arabic satellite television, especially 24-hour news and current affairs, provides an interesting area worthy of study, not only for its immediate socio-cultural and professional and ethical implications for the Arabic media in particular, but also for news and current affairs production in the western media that rely on foreign language sources and translation mediation for international stories.

Perceptions of acculturation and social identity construction among three Taiwanese/Chinese migrants in Australia

In recent years, increasing numbers of Chinese migrants have come to Australia to study or to live. In doing so, they have entered a new cultural space. They are faced with many challenges, not only to do with study experience, workplace experience and life-style practices, but also to do with language, communication, culture and identity. Such new challenges can feel dangerous, unstable and uncomfortable as they require moves out of the safety zone of primary cultural experience. This qualitative research study investigates the perceptions and narratives of three Taiwanese-Australian migrants in terms of their experience of this process of acculturation and social identity construction as migrant tertiary students in the new Australian context and of their subsequent experience professionally. Their accounts of where they see themselves to have 'landed' in terms of their acculturation process and identity construction might provide relevant insights to the experience of hybridity which is intercultural Australia.