Generalised finite volume strategies for simulating transport in strongly orthotropic porous media

In this work two different finite volume computational strategies for solving a representative two-dimensional diffusion equation in an orthotropic medium are considered. When the diffusivity tensor is treated as linear, this problem admits an analytic solution used for analysing the accuracy of the proposed numerical methods. In the first method, the gradient approximation techniques discussed by Jayantha and Turner [Numerical Heat Transfer, Part B: Fundamentals, 40, pp.367–390, 2001] are applied directly to the

Correlating flow induced shear stress and chondrocytes activity in micro-porous scaffold using computational fluid dynamics and rapid prototyping

Flow induced shear stress plays an important role in regulating cell growth and distribution in scaffolds. This study sought to correlate wall shear stress and chondrocytes activity for engineering design of micro-porous osteochondral grafts based on the hypothesis that it is possible to capture and discriminate between the transmitted force and cell response at the inner irregularities. Unlike common tissue engineering therapies with perfusion bioreactors in which flow-mediated stress is the controlling parameter, this work assigned the associated stress as a function of porosity to influence in vitro proliferation of chondrocytes. D-optimality criterion was used to accommodate three pore characteristics for appraisal in a mixed level fractional design of experiment (DOE); namely, pore size (4 levels), distribution pattern (2 levels) and density (3 levels). Micro-porous scaffolds (n=12) were fabricated according to the DOE using rapid prototyping of an acrylic-based bio-photopolymer. Computational fluid dynamics (CFD) models were created correspondingly and used on an idealized boundary condition with a Newtonian fluid domain to simulate the dynamic microenvironment inside the pores. In vitro condition was reproduced for the 3D printed constructs seeded by high pellet densities of human chondrocytes and cultured for 72 hours. The results showed that cell proliferation was significantly different in the constructs (p<0.05). Inlet fluid velocity of 3×10-2mms-1 and average shear stress of 5.65×10-2 Pa corresponded with increased cell proliferation for scaffolds with smaller pores in hexagonal pattern and lower densities. Although the analytical solution of a Poiseuille flow inside the pores was found insufficient for the description of the flow profile probably due to the outside flow induced turbulence, it showed that the shear stress would increase with cell growth and decrease with pore size. This correlation demonstrated the basis for determining the relation between the induced stress and chondrocyte activity to optimize microfabrication of engineered cartilaginous constructs.

CFD simulations of flow and heat transfer through the porous interface of a metal foam heat exchanger

This paper offers numerical modelling of a waste heat recovery system. A thin layer of metal foam is attached to a cold plate to absorb heat from hot gases leaving the system. The heat transferred from the exhaust gas is then transferred to a cold liquid flowing in a secondary loop. Two different foam PPI (Pores Per Inch) values are examined over a range of fluid velocities. Numerical results are then compared to both experimental data and theoretical results available in the literature. Challenges in getting the simulation results to match those of the experiments are addressed and discussed in detail. In particular, interface boundary conditions specified between a porous layer and a fluid layer are investigated. While physically one expects much lower fluid velocity in the pores compared to that of free flow, capturing this sharp gradient at the interface can add to the difficulties of numerical simulation. The existing models in the literature are modified by considering the pressure gradient inside and outside the foam. Comparisons against the numerical modelling are presented. Finally, based on experimentally-validated numerical results, thermo-hydraulic performance of foam heat exchangers as waste heat recovery units is discussed with the main goal of reducing the excess pressure drop and maximising the amount of heat that can be recovered from the hot gas stream.

Natural free convection in porous media: First field documentation in groundwater

Natural free convection is a process of great importance in disciplines from hydrology to meteorology, oceanography, planetary sciences, and economic geology, and for applications in carbon sequestration and nuclear waste disposal. It has been studied for over a century - but almost exclusively in theoretical and laboratory settings, Despite its importance, conclusive primary evidence of free convection in porous media does not currently exist in a natural field setting. Here, we present recent electrical resistivity measurements from a sabkha aquifer near Abu Dhabi, United Arab Emirates, where large density inversions exist. The geophysical images from this site provide, for the first time, compelling field evidence of fingering associated with natural free convection in groundwater.

Numerical simulation of anomalous infiltration in porous media

Nonlinear time-fractional diffusion equations have been used to describe the liquid infiltration for both subdiffusion and superdiffusion in porous media. In this paper, some problems of anomalous infiltration with a variable-order timefractional derivative in porous media are considered. The time-fractional Boussinesq equation is also considered. Two computationally efficient implicit numerical schemes for the diffusion and wave-diffusion equations are proposed. Numerical examples are provided to show that the numerical methods are computationally efficient.

Practice-led research and the innovation agenda : beyond the postgraduate research degree in the arts, design and media

The rise of the ‘practice-led’ research approach has given us a new way of understanding what creative practice in art, design and media can do in the academy and the world— it can materialise new ideas and forms into being as a form of experimental research. Yet, to date, attention around the world, and especially in Australia, has been chiefly directed at the postgraduate research degrees, most notably the PhD or doctoral equivalents. Recent mapping projects and surveys of practice-led research in Australia reveal much about the institutional conditions of higher degree researchers, supervisors, examiners and research training (Baker et al 2009; Evans et al 2003; Dally et al 2004; Paltridge et al 2009; Phillips et al 2009). Given this focus, we might well ask: is the practice-led approach destined to be a part of the higher degree ghetto only, or does it have an afterlife? What is the place of ‘practice-led’ beyond the postgraduate degree? After all postgraduate researchers do not remain postgraduates forever, and perhaps the practice-led approach to research may have benefits in wider university, professional and communal contexts.

Technological talespinning : new media and higher education in the USA : an examination of technological determinism

This thesis examines the theory of technological determinism, which espouses the view that technological change drives social change, through an analysis of the impact of new media on higher education models in the United States of America. In so doing, it explores the impacts of new media technologies on higher education, in particular, and society in general. The thesis reviews the theoretical shape of the discourse surrounding new media technologies before narrowing in on utopian claims about the impact of new media technologies on education. It tests these claims through a specific case study of higher education in the USA. The study investigates whether 'new' media technologies (eg the Internet) are resulting in new forms of higher education in the USA and whether the blurring of information and entertainment technologies has caused a similar blurring in education and entertainment providers. It uses primary data gathered by the author in a series of interviews with key education, industry and media representatives in North America in 1997. Chapter 2 looks at the literature and history surrounding several topics central to the thesis - the discourses of technological determinism, the history of technology use and adoption in education, and impacts of new media technologies on education. Chapter 3 presents the findings of the American case study on the relationship between media and higher education and Chapter 4 concludes and synthesises the investigation.