100 resultados para Vargas, Diego de, 1643-1704.
Resumo:
This paper evaluates the age-associated changes of resting ventilation of 115 high- and low-altitude Aymara subjects, of whom 61 were from the rural Aymara village of Ventilla situated at an average altitude of 4,200 m and 54 from the rural village of Caranavi situated at an average altitude of 900 m. Comparison of the age patterns of resting ventilation suggests the following conclusions: 1) the resting ventilation (ml/kg/min) of high-altitude natives is markedly higher than that of low-altitude natives; 2) the age decline of ventilation is similar in both lowlanders and highlanders, but the starting point and therefore the age decline are much higher at high altitude; 3) the resting ventilation that characterizes high-altitude Andean natives is developmentally expressed in the same manner as it is at low altitude; and 4) the resting ventilation (ml/kg/min) of Aymara high-altitude natives is between 40–80% lower than that of Tibetans. Am J Phys Anthropol 109:295–301, 1999. © 1999 Wiley-Liss, Inc.
Resumo:
Background Non-fatal health outcomes from diseases and injuries are a crucial consideration in the promotion and monitoring of individual and population health. The Global Burden of Disease (GBD) studies done in 1990 and 2000 have been the only studies to quantify non-fatal health outcomes across an exhaustive set of disorders at the global and regional level. Neither effort quantified uncertainty in prevalence or years lived with disability (YLDs). Methods Of the 291 diseases and injuries in the GBD cause list, 289 cause disability. For 1160 sequelae of the 289 diseases and injuries, we undertook a systematic analysis of prevalence, incidence, remission, duration, and excess mortality. Sources included published studies, case notification, population-based cancer registries, other disease registries, antenatal clinic serosurveillance, hospital discharge data, ambulatory care data, household surveys, other surveys, and cohort studies. For most sequelae, we used a Bayesian meta-regression method, DisMod-MR, designed to address key limitations in descriptive epidemiological data, including missing data, inconsistency, and large methodological variation between data sources. For some disorders, we used natural history models, geospatial models, back-calculation models (models calculating incidence from population mortality rates and case fatality), or registration completeness models (models adjusting for incomplete registration with health-system access and other covariates). Disability weights for 220 unique health states were used to capture the severity of health loss. YLDs by cause at age, sex, country, and year levels were adjusted for comorbidity with simulation methods. We included uncertainty estimates at all stages of the analysis. Findings Global prevalence for all ages combined in 2010 across the 1160 sequelae ranged from fewer than one case per 1 million people to 350 000 cases per 1 million people. Prevalence and severity of health loss were weakly correlated (correlation coefficient −0·37). In 2010, there were 777 million YLDs from all causes, up from 583 million in 1990. The main contributors to global YLDs were mental and behavioural disorders, musculoskeletal disorders, and diabetes or endocrine diseases. The leading specific causes of YLDs were much the same in 2010 as they were in 1990: low back pain, major depressive disorder, iron-deficiency anaemia, neck pain, chronic obstructive pulmonary disease, anxiety disorders, migraine, diabetes, and falls. Age-specific prevalence of YLDs increased with age in all regions and has decreased slightly from 1990 to 2010. Regional patterns of the leading causes of YLDs were more similar compared with years of life lost due to premature mortality. Neglected tropical diseases, HIV/AIDS, tuberculosis, malaria, and anaemia were important causes of YLDs in sub-Saharan Africa. Interpretation Rates of YLDs per 100 000 people have remained largely constant over time but rise steadily with age. Population growth and ageing have increased YLD numbers and crude rates over the past two decades. Prevalences of the most common causes of YLDs, such as mental and behavioural disorders and musculoskeletal disorders, have not decreased. Health systems will need to address the needs of the rising numbers of individuals with a range of disorders that largely cause disability but not mortality. Quantification of the burden of non-fatal health outcomes will be crucial to understand how well health systems are responding to these challenges. Effective and affordable strategies to deal with this rising burden are an urgent priority for health systems in most parts of the world. Funding Bill & Melinda Gates Foundation.
Resumo:
Biorobotics has the potential to provide an integrated understanding from neural systems to behavior that is neither ethical nor technically feasible with living systems. Robots that can interact with animals in their natural environment open new possibilities for empirical studies in neuroscience. However, designing a robot that can interact with a rodent requires considerations that span a range of disciplines. For the rat's safety, the body form and movements of the robot need to take into consideration the safety of the animal, an appropriate size for the rodent arenas, and behaviors for interaction. For the robot's safety, its form must be robust in the face of typically inquisitive and potentially aggressive behaviors by the rodent, which can include chewing on exposed parts, including electronics, and deliberate or accidental fouling. We designed a rat-sized robot, the iRat (intelligent rat animat technology) for studies in neuroscience. The iRat is about the same size as a rat and has the ability to navigate autonomously around small environments. In this study we report the first interactions between the iRat and real rodents in a free exploration task. Studies with five rats show that the rats and iRat interact safely for both parties.
Resumo:
This chapter introduces the principles of coring, including the objectives for taking a good core and the major factors that should be considered to ensure the collection of non disturbed, representative core samples. The chapter also provides an overview of the design, function, and operation of the main types of coring equipment that can be used to sample sediments from a variety of settings including lakes, the ocean, peat bogs, soils, and permafrost. The major advantages and disadvantages of each type of corer are also discussed.
Resumo:
The construction of menopause as a long-term risk to health and the adoption of discourses of prevention has made necessary a decision by women about medical treatment; specifically regarding the use of hormone replacement therapy. In a study of general practitioners’ accounts of menopause and treatment in Australia, women's ‘choice’, ‘informed decision-making’ and ‘empowerment’ were key themes through which primary medical care for women at menopause was presented. These accounts create a position for women defined by the concept of individual choice and an ethic of autonomy. These data are a basis for theorising more generally in this paper. We critically examine the construct of ‘informed decision-making’ in relation to several approaches to ethics including bioethics and a range of feminist ethics. We identify the intensification of power relations produced by an ethic of autonomy and discuss the ways these considerations inform a feminist ethics of decision-making by women. We argue that an ‘ethic of autonomy’ and an ‘offer of choice’ in relation to health care for women at menopause, far from being emancipatory, serves to intensify power relations. The dichotomy of choice, to take or not to take hormone replacement therapy, is required to be a choice and is embedded in relations of power and bioethical discourse that construct meanings about what constitutes decision-making at menopause. The deployment of the principle of autonomy in medical practice limits decision-making by women precisely because it is detached from the construction of meaning and the self and makes invisible the relations of power of which it is a part.
Resumo:
This paper presents two algorithms to automate the detection of marine species in aerial imagery. An algorithm from an initial pilot study is presented in which morphology operations and colour analysis formed the basis of its working principle. A second approach is presented in which saturation channel and histogram-based shape profiling were used. We report on performance for both algorithms using datasets collected from an unmanned aerial system at an altitude of 1000 ft. Early results have demonstrated recall values of 48.57% and 51.4%, and precision values of 4.01% and 4.97%.
Resumo:
BACKGROUND AND AIMS: Crohn's disease (CD) is an inflammatory bowel disease (IBD) caused by a combination of genetic, clinical, and environmental factors. Identification of CD patients at high risk of requiring surgery may assist clinicians to decide on a top-down or step-up treatment approach. METHODS: We conducted a retrospective case-control analysis of a population-based cohort of 503 CD patients. A regression-based data reduction approach was used to systematically analyse 63 genomic, clinical and environmental factors for association with IBD-related surgery as the primary outcome variable. RESULTS: A multi-factor model was identified that yielded the highest predictive accuracy for need for surgery. The factors included in the model were the NOD2 genotype (OR = 1.607, P = 2.3 × 10(-5)), having ever had perianal disease (OR = 2.847, P = 4 × 10(-6)), being post-diagnosis smokers (OR = 6.312, P = 7.4 × 10(-3)), being an ex-smoker at diagnosis (OR = 2.405, P = 1.1 × 10(-3)) and age (OR = 1.012, P = 4.4 × 10(-3)). Diagnostic testing for this multi-factor model produced an area under the curve of 0.681 (P = 1 × 10(-4)) and an odds ratio of 3.169, (95 % CI P = 1 × 10(-4)) which was higher than any factor considered independently. CONCLUSIONS: The results of this study require validation in other populations but represent a step forward in the development of more accurate prognostic tests for clinicians to prescribe the most optimal treatment approach for complicated CD patients.
Resumo:
Genomic DNA obtained from patient whole blood samples is a key element for genomic research. Advantages and disadvantages, in terms of time-efficiency, cost-effectiveness and laboratory requirements, of procedures available to isolate nucleic acids need to be considered before choosing any particular method. These characteristics have not been fully evaluated for some laboratory techniques, such as the salting out method for DNA extraction, which has been excluded from comparison in different studies published to date. We compared three different protocols (a traditional salting out method, a modified salting out method and a commercially available kit method) to determine the most cost-effective and time-efficient method to extract DNA. We extracted genomic DNA from whole blood samples obtained from breast cancer patient volunteers and compared the results of the product obtained in terms of quantity (concentration of DNA extracted and DNA obtained per ml of blood used) and quality (260/280 ratio and polymerase chain reaction product amplification) of the obtained yield. On average, all three methods showed no statistically significant differences between the final result, but when we accounted for time and cost derived for each method, they showed very significant differences. The modified salting out method resulted in a seven- and twofold reduction in cost compared to the commercial kit and traditional salting out method, respectively and reduced time from 3 days to 1 hour compared to the traditional salting out method. This highlights a modified salting out method as a suitable choice to be used in laboratories and research centres, particularly when dealing with a large number of samples.
Resumo:
Effective management of chronic diseases is a global health priority. A healthcare information system offers opportunities to address challenges of chronic disease management. However, the requirements of health information systems are often not well understood. The accuracy of requirements has a direct impact on the successful design and implementation of a health information system. Our research describes methods used to understand the requirements of health information systems for advanced prostate cancer management. The research conducted a survey to identify heterogeneous sources of clinical records. Our research showed that the General Practitioner was the common source of patient's clinical records (41%) followed by the Urologist (14%) and other clinicians (14%). Our research describes a method to identify diverse data sources and proposes a novel patient journey browser prototype that integrates disparate data sources.
Resumo:
Background No study relating the changes obtained in the architecture of erector spinae (ES) muscle were registered with ultrasound and different intensities of muscle contraction recorded by surface EMG (electromyography) on the ES muscle was found. The aim of this study was analyse the relationship in the response of the ES muscle during isometric moderate and light lumbar isometric extension considering architecture and functional muscle variables. Methods Cross-sectional study. 46 subjects (52% men) with a group mean age of 30.4 (±7.78). The participants developed isometric lumbar extension while performing moderate and low isometric trunk and hip extension in a sitting position with hips flexed 90 degrees and the lumbar spine in neutral position. During these measurements, electromyography recordings and ultrasound images were taken bilaterally. Bilaterally pennation angle, muscle thickness, torque and muscle activation were measured. This study was developed at the human movement analysis laboratory of the Health Science Faculty of the University of Malaga (Spain). Results Strong and moderate correlations were found at moderate and low intensities contraction between the variable of the same intensity, with correlation values ranging from 0.726 (Torque Moderate – EMG Left Moderate) to 0.923 (Angle Left Light – Angle Right Light) (p < 0.001). This correlation is observed between the variables that describe the same intensity of contraction, showing a poor correlation between variables of different intensities. Conclusion There is a strong relationship between architecture and function variables of ES muscle when describe an isometric lumbar extension at light or moderate intensity. Keywords: Ultrasonography; Surface electromyography; Thickness; Pennation angle; Erector spinae
Resumo:
Objectives The purpose of the study was to establish regression equations that could be used to predict muscle thickness and pennation angle at different intensities from electromyography (EMG) based measures of muscle activation during isometric contractions. Design Cross-sectional study. Methods Simultaneous ultrasonography and EMG were used to measure pennation angle, muscle thickness and muscle activity of the rectus femoris and vastus lateralis muscles, respectively, during graded isometric knee extension contractions performed on a Cybex dynamometer. Data form fifteen male soccer players were collected in increments of approximately 25% intensity of the maximum voluntary contraction (MVC) ranging from rest to MVC. Results There was a significant correlation (P < 0.05) between ultrasound predictors and EMG measures for the muscle thickness of rectus femoris with an R2 value of 0.68. There was no significant correlation (P > 0.05) between ultrasound pennation angle for the vastus lateralis predictors for EMG muscle activity with an R2 value of 0.40. Conclusions The regression equations can be used to characterise muscle thickness more accurately and to determine how it changes with contraction intensity, this provides improved estimates of muscle force when using musculoskeletal models.
Resumo:
The interaction of Au particles with few layer graphene is of interest for the formation of the next generation of sensing devices(1). In this paper we investigate the coupling of single gold nanoparticles to a graphene sheet, and multiple gold nanoparticles with a graphene sheet using COMSOL Multiphysics. By using these simulations we are able to determine the electric field strength and associated hot-spots for various gold nanoparticle-graphene systems. The Au nanoparticles were modelled as 8 nm diameter spheres on 1.5 nm thick (5 layers) graphene, with properties of graphene obtained from the refractive index data of Weber(2) and the Au refractive index data from Palik(3). The field was incident along the plane of the sheet with polarisation tested for both s and p. The study showed strong localised interaction between the Au and graphene with limited spread; however the double particle case where the graphene sheet separated two Au nanoparticles showed distinct interaction between the particles and graphene. An offset was introduced (up to 4 nm) resulting in much reduced coupling between the opposed particles as the distance apart increased. Findings currently suggest that the graphene layer has limited interaction with incident fields with a single particle present whilst reducing the coupling region to a very fine area when opposing particles are involved. It is hoped that the results of this research will provide insight into graphene-plasmon interactions and spur the development of the next generation of sensing devices.
Resumo:
The properties of ellipsoidal nanowires are yet to be examined. They have likely applications in sensing, solar cells, microelectronics and cloaking devices. Little is known of the qualities that ellipse nanowires exhibit as we vary the aspect ratio with different dielectric materials and how varying these attributes affects plasmon coupling and propagation. It is known that the distance a plasmon can travel is further if it is supported by a thicker circular nanowire, while thinner nanowires are expected to be able to increase QD coupling. Ellipsoidal nanowires may be a good compromise due to their ability to have both thin and thick dimensions. Furthermore it has been shown that the plasmon resonances along the main axis of an ellipsoidal particle is governed by the relative aspect ratio of the ellipsoid, which may lead to further control of the plasmon. Research was done by the use of COMSOL Multiphysics by looking at the fundamental plasmon mode supported by an ellipsoidal nanowire and then studying this mode for various geometrical parameters, materials and illumination wavelength. Accordingly it was found that ellipsoidal nanowires exhibit a minimum for the wavenumber and a maximum for the propagation distance at roughly the same dimensions - Highlighting that there is an aspect ratio for which there is poor coupling but low loss. Here we investigate these and related attributes.
Resumo:
Two hundred million people are displaced annually due to natural disasters with a further one billion living in inadequate conditions in urban areas. Architects have a responsibility to respond to this statistic as the effects of natural and social disasters become more visibly catastrophic when paired with population rise. The research discussed in this paper initially questions and considers how digital tools can be employed to enhance rebuilding processes, but still achieve sensitive, culturally appropriate and accepted built solutions. Secondly the paper reflects on the impact ‘real-world’ projects have on architectural education. Research aspirations encouraged an atypical ‘research by design’ methodology involving a focused case study in the recently devastated village Keigold, Ranongga, Solomon Islands. Through this qualitative approach specific place data and the accounts of those affected were documented through naturalistic and archival methods of observation and participation. Findings reveal a number of unanticipated results which would have been otherwise undetected if field research within the design and rebuilding process was not undertaken, reflecting the importance of place specific research in the design process. Ultimately, the study proves that it is critical for issues of disaster to be addressed on a local rather than global scale; decisions cannot be speculative, or solved at a distance, but require intensive collaborative work with communities to achieve optimum solutions. Architectural education and design studios would continue to benefit from focused community engagement and field research within the design process.