User friendly guide for rehabilitation or strengthening of bridge structures using fiber reinforced polymer composites

A worldwide interest is being generated in the use of fibre reinforced polymer composites (FRP) in rehabilitation of reinforced concrete structures. As a replacement for the traditional steel plates or external post-tensioning in strengthening applications, various types of FRP plates, with their high strength to weight ratio and good resistance to corrosion, represent a class of ideal material in external retrofitting. Within the last ten years, many design guidelines have been published to provide guidance for the selection, design and installation of FRP systems for external strengthening of concrete structures. Use of these guidelines requires understanding of a number of issues pertaining to different properties and structural failure modes specific to these materials. A research initiative funded by the CRC for Construction Innovation was undertaken (primarily at RMIT) to develop a decision support tool and a user friendly guide for use of fibre reinforced polymer composites in rehabilitation of concrete structures. The user guidelines presented in this report were developed after industry consultation and a comprehensive review of the state of the art technology. The scope of the guide was mainly developed based on outcomes of two workshops with Queensland Department of Main Roads (QDMR). The document covers material properties, recommended construction requirements, design philosophy, flexural, shear and torsional strengthening of beams and strengthening of columns. In developing this document, the guidelines published on FIB Bulletin 14 (2002), Task group 9.3, International Federation of Structural Concrete (FIB) and American Concrete Institute Committee 440 report (2002) were consulted in conjunction with provisions of the Austroads Bridge design code (1992) and Australian Concrete Structures code AS3600 (2002). In conclusion, the user guide presents design examples covering typical strengthening scenarios.

The user query based learning system for lifetime prediction of metallic components

Real-World Data Mining Applications generally do not end up with the creation of the models. The use of the model is the final purpose especially in prediction tasks. The problem arises when the model is built based on much more information than that the user can provide in using the model. As a result, the performance of model reduces drastically due to many missing attributes values. This paper develops a new learning system framework, called as User Query Based Learning System (UQBLS), for building data mining models best suitable for users use. We demonstrate its deployment in a real-world application of the lifetime prediction of metallic components in buildings

A user driven data mining process model and learning system

This paper deals with the problem of using the data mining models in a real-world situation where the user can not provide all the inputs with which the predictive model is built. A learning system framework, Query Based Learning System (QBLS), is developed for improving the performance of the predictive models in practice where not all inputs are available for querying to the system. The automatic feature selection algorithm called Query Based Feature Selection (QBFS) is developed for selecting features to obtain a balance between the relative minimum subset of features and the relative maximum classification accuracy. Performance of the QBLS system and the QBFS algorithm is successfully demonstrated with a real-world application

From Prosumer to Produser: Understanding User-Led Content Creation

Alvin Toffler’s image of the prosumer (1970, 1980, 1990) continues to influence in a significant way our understanding of the user-led, collaborative processes of content creation which are today labelled “social media” or “Web 2.0”. A closer look at Toffler’s own description of his prosumer model reveals, however, that it remains firmly grounded in the mass media age: the prosumer is clearly not the self-motivated creative originator and developer of new content which can today be observed in projects ranging from open source software through Wikipedia to Second Life, but simply a particularly well-informed, and therefore both particularly critical and particularly active, consumer. The highly specialised, high end consumers which exist in areas such as hi-fi or car culture are far more representative of the ideal prosumer than the participants in non-commercial (or as yet non-commercial) collaborative projects. And to expect Toffler’s 1970s model of the prosumer to describe these 21st-century phenomena was always an unrealistic expectation, of course. To describe the creative and collaborative participation which today characterises user-led projects such as Wikipedia, terms such as ‘production’ and ‘consumption’ are no longer particularly useful – even in laboured constructions such as ‘commons-based peer-production’ (Benkler 2006) or ‘p2p production’ (Bauwens 2005). In the user communities participating in such forms of content creation, roles as consumers and users have long begun to be inextricably interwoven with those as producer and creator: users are always already also able to be producers of the shared information collection, regardless of whether they are aware of that fact – they have taken on a new, hybrid role which may be best described as that of a produser (Bruns 2008). Projects which build on such produsage can be found in areas from open source software development through citizen journalism to Wikipedia, and beyond this also in multi-user online computer games, filesharing, and even in communities collaborating on the design of material goods. While addressing a range of different challenges, they nonetheless build on a small number of universal key principles. This paper documents these principles and indicates the possible implications of this transition from production and prosumption to produsage.

User behaviours and intentions with digital news media in Australia

This paper summarises findings from a survey of user behaviors and intentions towards digital media and information in Australia. It was undertaken in the first quarter of 2009 by the Queensland University of Technology Creative Industries Faculty and was funded by the Smart Services Cooperative Research Centre. The survey targeted users of 2 news and information sites that are available online only. Findings highlighted differences between the 18-24 year age segment and older users. Social networks (specifically friends and family) were rated as the least reliable, relevant and accurate sources of news. Other findings indicate online news sources that are associated with an established newspaper are highly valued as reliable, relevant and accurate news sources by most people. While most people prefer to use online news sources, there is a great deal of variation in the ways in which people actually use online news. From a total of 524 respondents to the survey it was possible to identify three main types of online news consumers: convenience, loyal and customising users.

The user-led disruption : self-(re)broadcasting at Justin.tv and elsewhere

The rise of videosharing and self-(re)broadcasting Web services is posing new threats to a television industry already struggling with the impact of filesharing networks. This paper outlines these threats, focussing especially on the DIY re-broadcasting of live sports using Websites such as Justin.tv and a range of streaming media networks built on peer-to-peer filesharing technology.

User-Generated Content als Qualitätsmedium? Alternative Anreize für Qualitätscontent

Angetrieben und unterstützt durch Web-2.0-Technologien, gibt es heute einen Trend zur Verbindung der Nutzung und Produktion von Inhalten als Produtzung (engl. produsage ). Um dabei die Qualität der erstellten Inhalte und eine nachhaltige Teilnahme der Nutzer sicherzustellen, müsen vier grundlegende Prinzipien eingehalten werden: * Größtmögliche Offenheit. * Ankurbeln der Gemeinschaft durch Inhalte und Hilfsmittel. * Unterstützung der Gruppendynamik und Abtretung von Verantwortung. * Keine Ausbeutung der Gemeinschaft und ihrer Arbeit.

Modelling urban public transit users' route choice behaviour: review and outlook

This paper reviews the main development of approaches to modelling urban public transit users’ route choice behaviour from 1960s to the present. The approaches reviewed include the early heuristic studies on finding the least cost transit route and all-or-nothing transit assignment, the bus common line problem and corresponding network representation methods, the disaggregate discrete choice models which are based on random utility maximization assumptions, the deterministic use equilibrium and stochastic user equilibrium transit assignment models, and the recent dynamic transit assignment models using either frequency or schedule based network formulation. In addition to reviewing past outcomes, this paper also gives an outlook into the possible future directions of modelling transit users’ route choice behaviour. Based on the comparison with the development of models for motorists’ route choice and traffic assignment problems in an urban road area, this paper points out that it is rewarding for transit route choice research to draw inspiration from the intellectual outcomes out of the road area. Particularly, in light of the recent advancement of modelling motorists’ complex road route choice behaviour, this paper advocates that the modelling practice of transit users’ route choice should further explore the complexities of the problem.

Bringing the internet down to earth : emerging spaces of locative media

Web 1.0 referred to the early, read-only internet; Web 2.0 refers to the ‘read-write web’ in which users actively contribute to as well as consume online content; Web 3.0 is now being used to refer to the convergence of mobile and Web 2.0 technologies and applications. One of the most important developments in mobile 3.0 is geography: with many mobile phones now equipped with GPS, mobiles promise to “bring the internet down to earth” through geographically-aware, or locative media. The internet was earlier heralded as “the death of geography” with predictions that with anyone able to access information from anywhere, geography would no longer matter. But mobiles are disproving this. GPS allows the location of the user to be pinpointed, and the mobile internet allows the user to access locally-relevant information, or to upload content which is geotagged to the specific location. It also allows locally-specific content to be sent to the user when the user enters a specific space. Location-based services are one of the fastest-growing segments of the mobile internet market: the 2008 AIMIA report indicates that user access of local maps increased by 347% over the previous 12 months, and restaurant guides/reviews increased by 174%. The central tenet of cultural geography is that places are culturally-constructed, comprised of the physical space itself, culturally-inflected perceptions of that space, and people’s experiences of the space (LeFebvre 1991). This paper takes a cultural geographical approach to locative media, anatomising the various spaces which have emerged through locative media, or “the geoweb” (Lake 2004). The geoweb is such a new concept that to date, critical discourse has treated it as a somewhat homogenous spatial formation. In order to counter this, and in order to demonstrate the dynamic complexity of the emerging spaces of the geoweb, the paper provides a topography of different types of locative media space: including the personal/aesthetic in which individual users geotag specific physical sites with their own content and meanings; the commercial, like the billboards which speak to individuals as they pass in Minority Report; and the social, in which one’s location is defined by the proximity of friends rather than by geography.

State-of-the-Art Review on Opinion Mining from Online Customers’ Feedback

Dealing with the ever-growing information overload in the Internet, Recommender Systems are widely used online to suggest potential customers item they may like or find useful. Collaborative Filtering is the most popular techniques for Recommender Systems which collects opinions from customers in the form of ratings on items, services or service providers. In addition to the customer rating about a service provider, there is also a good number of online customer feedback information available over the Internet as customer reviews, comments, newsgroups post, discussion forums or blogs which is collectively called user generated contents. This information can be used to generate the public reputation of the service providers’. To do this, data mining techniques, specially recently emerged opinion mining could be a useful tool. In this paper we present a state of the art review of Opinion Mining from online customer feedback. We critically evaluate the existing work and expose cutting edge area of interest in opinion mining. We also classify the approaches taken by different researchers into several categories and sub-categories. Each of those steps is analyzed with their strength and limitations in this paper.

User behaviours and intentions in digital media in Australia

This paper reports findings from a study of user behaviours and intentions towards online news and information in Australia, undertaken by the Queensland University of Technology Creative Industries Faculty and the Smart Services Cooperative Research Centre. It has used a literature review, online survey, focus groups and interviews to explore attitudes and behaviours towards online news and information. The literature review on consumer user of online media highlighted emerging technical opportunities, and flagged existing barriers to access experienced by consumers in the Australian digital media sector. The literature review highlighted multiple disconnects between consumer interests in online news and their ability to fulfil them. This presents an opportunity for news entities to appraise and resolve. Doing so may enhance their service offering, attract consumers and improve loyalty. These themes were further explored by the survey. The survey results revealed three typologies of user, described as ‘convenience’, ‘loyal’ and ‘customising’. Convenience users tend to access news by default, for example when they log out of email. Loyal users seek out a trusted brand such as mainstream news mastheads. Customising users tend to tailor news to their preferences, and be the first to use leading edge media. Respondents to the survey were then invited to participate in focus groups, which aimed to test the survey results. Consumer perceptions and attitudes are important factors in progression towards an information economy, because ultimately consumers are customers. By segmenting the online news market according to customer typology, media providers may identify new opportunities to attract and retain customers.

A 5 year review of information requests to QISU

The Queensland Injury Surveillance Unit (QISU) has been collecting and analysing injury data in Queensland since 1988. QISU data is collected from participating emergency departments (EDs) in urban, rural and remote areas of Queensland. Using this data, QISU produces several injury bulletins per year on selected topics, providing a picture of Queensland injury, and setting this in the context of relevant local, national and international research and policy. These bulletins are used by numerous government and non-government groups to inform injury prevention and practice throughout the state. QISU bulletins are also used by local and state media to inform the general public of injury risk and prevention strategies. In addition to producing the bulletins, QISU regularly responds to requests for information from a variety of sources. These requests often require additional analysis of QISU data to tailor the response to the needs of the end user. This edition of the bulletin reviews 5 years of information requests to QISU.

A role mining inspired approach to representing user behaviour in ERP systems

Despite all attempts to prevent fraud, it continues to be a major threat to industry and government. Traditionally, organizations have focused on fraud prevention rather than detection, to combat fraud. In this paper we present a role mining inspired approach to represent user behaviour in Enterprise Resource Planning (ERP) systems, primarily aimed at detecting opportunities to commit fraud or potentially suspicious activities. We have adapted an approach which uses set theory to create transaction profiles based on analysis of user activity records. Based on these transaction profiles, we propose a set of (1) anomaly types to detect potentially suspicious user behaviour and (2) scenarios to identify inadequate segregation of duties in an ERP environment. In addition, we present two algorithms to construct a directed acyclic graph to represent relationships between transaction profiles. Experiments were conducted using a real dataset obtained from a teaching environment and a demonstration dataset, both using SAP R/3, presently the most predominant ERP system. The results of this empirical research demonstrate the effectiveness of the proposed approach.

Beyond the user : use and non-use in HCI

For many, an interest in Human-Computer Interaction is equivalent to an interest in usability. However, using computers is only one way of relating to them, and only one topic from which we can learn about interactions between people and technology. Here, we focus on not using computers – ways not to use them, aspects of not using them, what not using them might mean, and what we might learn by examining non-use as seriously as we examine use.