Submarine pyroclastic deposits formed during the 20th May 2006 dome collapse of the Soufrière Hills Volcano, Montserrat

The 20th May 2006 lava dome collapse of the Soufrière Hills Volcano, Montserrat, had a total non-dense rock equivalent (non-DRE) collapse volume of approximately 115 × 10 6 m 3. The majority of this volume was deposited into the ocean. The collapse was rapid, 85% of the mobilized volume being removed in just 35 min, giving peak pyroclastic flow flux of 66 × 10 3 m 3 s -1. Channel and levee facies on the submarine flanks of the volcano and formation of a thick, steep-sided ridge, suggest that the largest and most dense blocks were transported proximally as a high concentration granular flow. Of the submerged volume, 30% was deposited from the base of this granular flow, forming a linear, high-relief ridge that extends 7 km from shore. The remaining 70% of the submerged volume comprises the finer grain sizes, which were transported at least 40 km by turbidity currents on gradients of <2°. At several localities, the May 2006 distal turbidity currents ran up 200 m of topography and eroded up to 20 cm of underlying substrate. Multiple turbidites are preserved, representing current reflection from the graben margins and deflection around topography. The high energy of the May 2006 collapse resulted in longer submarine run out than the larger (210 × 10 6 m 3) Soufrière Hills dome collapse in July 2003.

Composing maternal identities : the living realities of mothers with young adult-children in twenty-first century Australia

There is an abundance of books available on the topic of motherhood and mothering; the majority of these books focus on the vulnerability of babies and young children and the motherwork such vulnerability demands. In particular they focus on what it is right to do in the interests of the child, and particularly his or her growth and development. Such a focus is consistent in Western culture with modern moral frameworks where understandings of goodness have been assimilated to dimensions of human action rather than dimensions of human being, selfhood, or specific forms of life. As Charles Taylor has observed, much modern moral philosophy has focused =on what it is right to do rather than the nature of the good life‘ (1989, 13). The master narratives of motherhood and the prevailing social discourses of intensive1 and sacrificial2 mothering exemplify this view as such narratives and discourses depict =what mothers are expected to do [and] how mothers are supposed to be‘ (Nelson 2001, 140). From such infant/child-focused accounts a canonical maternal identity can be discerned; arguably, it is a restricted one. The majority of these books fail to address questions related to what it means be a mother in particular situated, existing, living realities. For instance, ask a mother with young children what being a mother means to her and she may speak of the challenges she faces balancing paid employment and her role as a mother, or the impact of the demands being made on her time and energy. However, ask a mother with young adult-children3 what being a mother means to her and she may speak in similar tones, but she may also speak in differing tones. For example, a "mature" mother may speak of the "empty nest", the "crowded house" and/or "its revolving front door". She may speak of issues related to the vulnerability of the long term marriage, elder care, or grandparenting, or even disillusionment and disenchantment. The purpose of this research is to explore the identity challenges and prospects of some mothers with young adult-children aged between 18 and 30 years of age in twenty-first century Australia. In interpreting the identity challenges and prospects this particular cohort of mothers encounter in their ordinary, everyday living, a diverse and particular range of maternal experiences.my own included5.have been traced, along with the social and ethical meanings ascribed in them. With an understanding and appreciation of voice as the medium which connects one's inner and outer worlds, this research illuminates the plurality of voices and the multiple layers of meaning in each of these mother's particular living and existing realities. Specifically, this research addresses the narrowly constructed, canonical maternal identity through a critical exploration and reflection on stories, shared in a research context, of the living realities of a group of self-identified "mature", middle-class, Australian mothers with children aged between 18 and 30 years of age6. By appraising the broader familial, historical, social, cultural, institutional, and, importantly, moral contexts in which these mothers are situated, 'thick descriptions' (Geertz 1973, 27)7 of maternal identities, and the challenges and prospects these mothers are negotiating, are provided. In terms of its ethical orientation, the frameworks which support and frame this research reject, repudiate and contest (Nelson 2001) the reduction of ethical concerns to individual or intellectual problems or dilemmas to be solved through the application of a theory derived from reasoned thinking. In dismissing deductive and =theoretical-juridical‘8 approaches, the individualistic orientation entrenched in contemporary Western moral thinking, expressed in the notion of '"what ought I to do" when faced with a problem, issue or dilemma of practical urgency' (Isaacs & Massey 1994, 1), is simultaneously rejected, repudiated and contested (Nelson 2001). In countering such understandings, this research reorients us to the illumination and articulation of who it is good to be, for each of these mothers, in allegiance with those goods which guide and inspire her orientations towards living a good life—a life which embraces and enhances the flourishing of herself and her significant others. With an understanding and appreciation that 'mind is never free of precommitment[—t]here is no innocent eye, nor is there one that penetrates aboriginal reality' (Bruner 1987, 32), this thesis is written with the voices of other interlocutors9. These interlocutors include the voices of my research participants whom I refer to as "research interlocutors", my textual "friends" — those scholars whose work resonates strongly with my orientations—as well as the myriad other voices that speak to mothers, for mothers and about mothers, such as those found in popular and mainstream press and culture. Sometimes these voices resonate; other times dissonance may be heard. In situating this research within these complementary frameworks, this research invites readers to join with me in considering, appreciating and appraising the narrow construction of maternal identity. I seek for this engagement, like the engagements with my research interlocutors, to be 'a meeting of voices, an authentic dialogue that is inclusive of the voices of all concerned participants' (Isaacs 2001, 6). I hope that the voices in this thesis resonate with yours (although, at times, you may feel some dissonance) and that together we can draw closer to the accounting, re-counting and re-stor(y)ing of maternal identities; like concentric circles of witness, the dialogue, ...will thus be expanded rippling into corners where one might both imagine, and least expect. Possibilities, then, are vast; the future exciting (Smith 2007, 397). This research is also shaped and guided by maternal scholarship, a relatively new field of inquiry known as 'motherhood studies' (O'Reilly 2011, xvii) which has its origins within the broader terrain of feminist scholarship. As a work of maternal scholarship, this thesis draws upon and continues the tradition of examining motherhood as it is experienced 'in a social context, as embedded in a political institution: in feminist terms' (Rich 1995, ix). It values mothers, their experiences, their stories, their lives. As such, this research is oriented towards 'matricentric feminism', a particular form of feminist inquiry, politics and theory which is consistent with and receptive to feminist frameworks of care and equal rights (O‘Reilly 2011, 25). A number of complementary conceptual frameworks have been engaged in this research with the thesis presented in three parts: the pre-figurative, configurative and re-configurative. As my particular living experiences provided the initial motivation for this research, an account of the challenges I experienced as a mother with young adult-children are outlined as a Prelude to this thesis. Attention then turns to Part One – Pre-figuring Maternal Identities in which the contextual, conceptual and methodological foundations underpinning this research are explored and outlined. In Chapter One, the prevailing cultural narratives and social discourses supporting and shaping the construction of the canonical maternal identity are outlined. Next, in setting the scholarly context, the critiques — arising from feminist and maternal scholarship — of motherhood as a patriarchal institution, mothering as experience, and mothering as work, are explored. As this research engaged with participants who are embedded in particular middle-class, heterosexual, familial and cultural structures, an exploration of family life cycle theory and main stream media accounts are also incorporated. The terrain in which "mature" mothering within an Australian context is experienced is also outlined, including the notions of "empty nests" and "crowded houses", grandparenting, elder care and women's midlife transition. Chapter Two gives an account of the conceptual ontological, ethical, identity and narrative frameworks underpinning this research. In setting the context for rich interpretations, the characteristics of being human10 are outlined before attention turns to our embodiment and embeddedness in our shared human condition11. From this point, attention then turns to understanding the moral form of human living12. In appreciating the vulnerability inherent in our shared human condition, the ways in which we may experience trouble in our lives is noted. The framing of identity constitution13 as complex, multi-faceted, relationally negotiated and composed is then outlined, followed by an understanding of why narrative is a valuable interpretive tool for interpreting and understanding human experiences. This chapter concludes with an appreciation of the ethical significance of storytelling. The research methodology is then outlined in Chapter Three. The rationale underpinning the adoption of the narrative interviewing technique of in-depth interviewing is explored. In exploring these methodological frameworks, the recruitment and interview processes involved in gathering and interpreting the recorded transcripts of ten Australian mothers with young adult-children are outlined. The method of analysis known as the Listening Guide14 best complements the multi-layered, pluri-vocal nature of narrative accounting. The final section of Chapter Three outlines The Guide, with one mother's recorded transcript used to illustrate this method's step-by-step process. Having gathered an understanding and appreciation of the pluri-vocal, multi-layered nature of narrative and identity constitution, the tone of this thesis changes in Part Two . Configuring Maternal Identities. This section consists of Chapters Four and Five and seeks to find meaning in, and make sense of, the differences and commonalities across these particular accounts. Chapter Four explores the living realities of four Australian mothers with young adult-children: Poppy, Honey, Lily and Heather. In presenting a thick description of these mothers' situated realities, the frameworks.the familial, social, cultural, historical and institutional backgrounds.which have supported and shaped each mother's experiences are illuminated. Simultaneously revealed through these particular accounts are the plurality of goods focusing and moving each mother to the moral form of life, a life of meaning and purpose. The harms challenging some mothers' moral motivations are also revealed in this chapter. Specifically illustrated in Chapter Four are the unique and qualitative differences of particular maternal identity configurations. Chapter Five reveals the commonalities amongst all of the research interlocutors' accounts. This chapter contests the individualistic orientation of many contemporary accounts of motherhood which are aimed at defining or contesting what a "good" mother ought to do. By turning away from such individualistic orientations, the chapter does not seek to define 'the content of obligation' (Taylor 1989, 3) but rather seeks to illuminate and articulate a richer, deeper understanding and appreciation of maternal be-ing and be-coming - that is, who it is good to be, for each of these mothers - in allegiance with those goods that focus and inspire her moral motivations. Part Three - Re-Configuring Maternal Identities, which is comprised of Chapter Six, draws this thesis to a close. In this final chapter, the preconceptions, conditions and aspirations for this mother-centred account of the living realities of a small, local cohort of mothers are reiterated. The insights gathered from the rich, descriptive accounts are illuminated and articulated, and the chapter closes with some suggestions for future research. In a Postlude, I reflect on how this research has been a transformative learning experience in my own life.an experience in which I have been able to not only deeply understand and appreciate the challenges and disorientation I was experiencing but also to identify and reorient my stance in relation to the good. In a practical sense, by offering thick descriptions of the living realities of this cohort of "mature" mothers, this research challenges the canonical maternal identity and questions its relevance for, and effect on, "mature" mothers' identity constitution. By bringing to light the complex existing realities of these particular mothers, this research critiques the canonical maternal identity by illustrating that each mother's life and her identity constitutions are complex, relationally negotiated and composed and that motherhood is an enduring way of being. Through these illustrations, this research engages with and extends understandings of difference feminism. This research, however, not only rejects, repudiates and contests (Nelson 2001) the narrowly defined canonical maternal identity. By illuminating and articulating the goods which shape and inspire these "mature" mothers' motherwork, this research offers a matricentric account which is consistent with and respectful of the particular, situated realities—the broader familial, social, institutional, but most importantly, moral values and frameworks—in which each mother‘s life is embedded and her motherwork oriented. By understanding and appreciating the complex and multiple webs of relationships in which each mother exists, this matricentric re-stor(y)ing of maternal experiences not only understands and appreciates the unique nature of each mother‘s existing realities, it is oriented to the continuing enhancing of the shared pursuit of the good which underpins particular maternal practices and particular maternal ways of being.

Eruption of Soufrière Hills (1995–2009) from an offshore perspective : insights from repeated swath bathymetry surveys

This contribution provides an analysis of the 1995–2009 eruptive period of Soufrière Hills volcano (Montserrat) from a unique offshore perspective. The methodology is based on five repeated swath bathymetric surveys. The difference between the 2009 and 1999 bathymetry suggests that at least 395 Mm3 of material has entered the sea. This proximal deposit reaches 95 m thick and extends ∼7km from shore. However, the difference map does not include either the finer distal part of the submarine deposit or the submarine part of the delta close to the shoreline. We took both contributions into account by using additional information such as that from marine sediment cores. By March 2009, at least 65% of the material erupted throughout the eruption has been deposited into the sea. This work provides an excellent basis for assessing the future activity of the Soufrière Hills volcano (including potential collapse), and other volcanoes on small islands.

Characterisation of flexural bond strength in thin bed concrete masonry

This paper presents an experimental investigation of the flexural bond strength of thin bed concrete masonry. Flexural bond strength of masonry depends upon the mortar type, the techniques of dispersion of mortar and the surface texture (roughness) of concrete blocks. There exists an abundance of literature on the conventional masonry bond containing 10mm thick mortar; however, the 2mm polymer flue mortar bond is not yet well researched. This paper reports a study on the examination of the effect of mortar compositions, dispersion methods and unit surface textures to the flexural bond strength of thin bed concrete masonry. Three types of polymer modified glue mortars, three surface textures and four techniques of mortar dispersion have been used in preparing 108 four point flexural test specimens. All mortar joints have been carefully prepared to ensure achievement of 2mm layer polymer mortar thickness on average. The results exhibit the flexural bond strength of thin bed concrete masonry much is higher than that of the conventional masonry; moreover the unit surface texture and the mortar dispersion methods are found to have significant influence on the flexural bond strength.

Porosity of serially sectioned interplanetary dust particles

The application of epoxy embedding and microtomy to individual chondritic interplanetary dust particles (lOP's)(Bradley and Brownlee, 1986a) provides not only higher precision in thin-film elemental analyses (Bradley and Brownlee, 19861:1), but also allows a wealth of other important techniques for the micro-characterization of these primitive extraterrestrial materials. For example, individual sections (e.g. 100 nm thick) or a series of sections, can be examined using image analysis techniques which utilize either transmitted or scanned secondary electron images, or alternatively, secondary X-ray spectra collected concurrently from a given region of sample. Individual particles, or groups of particles with similar image characteristics can then be rapidly identified using conventional grey-scale/particle recognition techniques for each microtomed section of lOP. This type of image analysis provides a suitable method for determination of particle size and shape distribution as well as porosity throughout the aggregate.

Natural convection flow in a strong cross magnetic field with radiation

The problem of MHD natural convection boundary layer flow of an electrically conducting and optically dense gray viscous fluid along a heated vertical plate is analyzed in the presence of strong cross magnetic field with radiative heat transfer. In the analysis radiative heat flux is considered by adopting optically thick radiation limit. Attempt is made to obtain the solutions valid for liquid metals by taking Pr≪1. Boundary layer equations are transformed in to a convenient dimensionless form by using stream function formulation (SFF) and primitive variable formulation (PVF). Non-similar equations obtained from SFF are then simulated by implicit finite difference (Keller-box) method whereas parabolic partial differential equations obtained from PVF are integrated numerically by hiring direct finite difference method over the entire range of local Hartmann parameter, $xi$ . Further, asymptotic solutions are also obtained for large and small values of local Hartmann parameter $xi$ . A favorable agreement is found between the results for small, large and all values of $xi$ . Numerical results are also demonstrated graphically by showing the effect of various physical parameters on shear stress, rate of heat transfer, velocity and temperature.

Conduction-radiation effect on natural convection flow in a fluid-saturated non-Darcy porous medium enclosed by non-isothermal walls

The effect of conduction-convection-radiation on natural convection flow of Newtonian optically thick gray fluid, confined in a non-Darcian porous media square cavity is numerically studied. For the gray fluid consideration is given to Rosseland diffusion approximation. Further assuming that (i) the temperature of the left vertical wall is varying linearly with height, (ii) cooled right vertical and top walls and (iii) the bottom wall is uniformly-heated. The governing equations are solved using the Alternate Direct Implicit method together with the Successive Over Relaxation technique. The investigation of the effect of governing parameters namely the Forschheimer resistance (Γ), the Planck constant (Rd), and the temperature difference (Δ), on flow pattern and heat transfer characteristics has been carried out. It was seen that the reduction of flow and heat transfer occurs as the Forschheimer resistance is increased. On the other hand both the strength of flow and heat transfer increases as the temperature ratio, Δ, is increased.

Re-melting of Bi-2212/Ag laminated tapes by partial melting process

Bi-2212 tapes are prepared by a combination of dip-coating and partial melt processing. We investigate the effect of re-melting of those tapes by partial melting followed by slow cooling on the structure and superconducting properties. Microstructural studies of re-melted samples show that they have the same overall composition as partially melted tapes. However, the fractional volumes of the secondary phases differ and the amounts and distribution of the secondary phases have a significant effect on the critical current. Critical current of Bi-2212/Ag tapes strongly depends on the maximum processing temperature. Initial J(c)'s of the tapes, which are partially melted, then slowly solidified at optimum conditions and finally post-annealed in an inert atmosphere, are up to 10.4 x 10(3) A/cm(2). It is found that the maximum processing temperature at initial partial melting has an influence on the optimum re-heat treatment conditions for the tapes. Re-melted tapes processed at optimum conditions recover superconducting properties after post-annealing in an inert atmosphere: the J(c) values of the tapes are about 80-110% of initial J(c)'s of those tapes.

Microstructural studies of quenched partially-melted Y-123 materials and Y-123 with Y-211, PtO2 and CeO2 additions

The microstructure of YBa2Cu3O7-delta (Y-123) materials partially-melted in air and quenched from the temperature range 900-1100 degrees C, has been characterized using a combination of X-ray diffractometry, optical microscopy, scanning electron microscopy, electron microprobe analyses, transmission electron microscopy and energy and wave dispersive X-ray spectrometries. The microstructural studies reveal significant changes in the character of the quenched partial-melt as a function of temperature and time before quenching. BaCu2O2 and BaCuO2 are found to co-exist in stoichiometric samples quenched from the temperature range 920-960 degrees C. Under suitable cooling conditions, large pockets of melt cristallize as BaCuO2 with an exsolution of BaCu2O2 in the form of thin plates (approximate to 50-100 nm thick) along facets. Y2BaCuO5 (Y-211) additions are associated with the formation of BaCu2O2 at 1100 degrees C. Preliminary results on the effects of PtO2 and CeO2 additions to Y-123 (and Y-123 with Y-211 additions) show that these enhace the formation of BaCu2O2 at the melting temperature of 1100 degrees C. (C) 1998 Elsevier Science S.A. All rights reserved.

The role of randomly mixed-layered chlorite/smectite in the transformation of smectite to chlorite

Vesicular and groundmass phyllosilicates in a hydrothermally altered basalt from the Point Sal ophiolite, California, have been studied using transmission electron microscopy (TEM). Pore-filling phyllosilicates are texturally characterized as having coherent, relatively thick and defect-free crystals of chlorite (14 Å) with occasional 24-Å periodicities. Groundmass phyllosilicates are texturally characterized as 1) randomly oriented crystals up to 200 Å in width and 2) larger, more coherent crystals up to 1000 Å in width. Small crystallites contain predominantly 14-Å layers with some 24-Å units. Large crystals show randomly interlayered chlorite/smectite (C/S), with approximately 50% chlorite on average. Adjacent smectite-like layers are not uncommon in the groundmass phyllosilicates. Electron microprobe analyses show that Fe/Mg ratios of both groundmass and vesicular phyllosilicates are fairly constant. Termination of brucite-like interlayers has been identified in some of the TEM images. The transformation mechanisms represented by these layer terminations are 1) growth of a brucite-like interlayer within smectite interlayer regions and 2) the dissolution and reprecipitation of elements to form chlorite layers. Both mechanisms require an increase in volume as smectite transforms to chlorite. The data, combined with that from previously published reports, suggest that randomly interlayered C/S is a metastable phase formed in microenvironments with low water/rock ratios. Chlorite forms in microenvironments in the same sample dominated by higher water/rock ratios. The relatively constant number of Mg's in the structure (Mg#) of both structures indicates that in both microenvironments the bulk rock composition has influence over the composition of phyllosilicates.

Were intercalated komatiites and dacites at the Black Swan nickel sulphide mine, Yilgarn Craton, Western Australia, emplaced as extrusive lavas or intrusive bodies? The significance of breccia textures and contact relationships

Intercalated Archean komatiites and dacites sit above a thick footwall dacite unit in the host rock succession at the Black Swan Nickel Mine, north of Kalgoorlie in the Yilgarn Craton, Western Australia. Both lithofacies occur in units that vary in scale from laterally extensive at the scale of the mine lease to localized, thin, irregular bodies, from > 100 m thick to only centimetres thick. Some dacites are only slightly altered and deformed, and are interpreted to post-date major deformation and alteration (late porphyries). However, the majority of the dacites display evidence of deformation, especially at contacts, and metamorphism, varying from silicification and chlorite alteration at contacts to pervasive low grade regional metamorphic alteration represented by common assemblages of chlorite, sericite and albite. Texturally, the dacites vary from entirely massive and coherent to partially brecciated to totally brecciated. Strangely, some dacites are coherent at the margins and brecciated internally. Breccia textures vary from cryptically defined, to blocky, closely packed, in situ jig-saw fit textures with secondary minerals in fractures between clasts, to more apparent matrix rich textures with round clast forms, giving apparent conglomerate textures. Some clast zones have multi-coloured clasts, giving the impression of varied provenance. Strangely however, all these textural variants have gradational relationships with each other, and no bedding or depositional structures are present. This indicates that all textures have an in situ origin. The komatiites are generally altered and pervasively carbonate veined. Preservation of original textures is patchy and local, but includes coarse adcumulate, mesocumulate, orthocumulate, crescumulate-harrisite and occasionally spinifex textures. Where original contacts between komatiites and dacites are preserved intact (i.e. not sheared or overprinted by alteration), the komatiites have chilled margins, whereas the dacites do not. The margins of the dacites are commonly silicified, and inclusions of dacite occur in komatiite, even at the top contacts of komatiite units, but komatiite clasts do not occur in the dacites. The komatiites therefore were emplaced as sills into the dacites, and the intercalated relationships are interpreted as intrusive. The brecciation and alteration in the dacites are interpreted as being largely due to hydraulic fracturing and alteration induced by contact metamorphic effects and hydrothermal alteration deriving from the intrusion of komatiites into the felsic pile. The absence of autobreccia and hyaloclastite textures in the dacites suggest that they were emplaced as an earlier intrusive (sill?) complex at a high level in the crust.

Transmission X-ray microscopy : a new tool in clay mineral floccules characterization

Effective flocculation and dewatering of mineral processing streams containing clays are microstructure dependent in clay-water systems. Initial clay flocculation is crucial in the design and for the development of a new methodology of gas exploitation. Microstructural engineering of clay aggregates using covalent cations and Keggin macromolecules have been monitored using the new state of the art Transmission X-ray Microscope (TXM) with 60 nm tomography resolution installed in a Taiwanese synchrotron. The 3-D reconstructions from TXM images show complex aggregation structures in montmorillonite aqueous suspensions after treatment with Na+, Ca2+ and Al13 Keggin macromolecules. Na-montmorillonite displays elongated, parallel, well-orientated and closed-void cellular networks, 0.5–3 μm in diameter. After treatment by covalent cations, the coagulated structure displays much smaller, randomly orientated and openly connected cells, 300–600 nm in diameter. The average distances measured between montmorillonite sheets was around 450 nm, which is less than half of the cell dimension measured in Na-montmorillonite. The most dramatic structural changes were observed after treatment by Al13 Keggin; aggregates then became arranged in compacted domains of a 300 nm average diameter composed of thick face-to-face oriented sheets, which forms porous aggregates with larger intra-aggregate open and connected voids.

An in-vitro 3-D cell culture model for studying pathomechanisms in AMD

Purpose To develop a novel 3-D cell culture model with the view to studying the pathomechanisms underlying the development of age-related macular degeneration (AMD). Our central hypothesis is that the silk structural protein fibroin used in conjunction with cultured human cells can be used to mimic the structural relationships between the RPE and choriocapillaris in health and disease. Methods Co-cultures of human RPE cells (ARPE-19 cells grown in Miller’s medium) and microvascular endothelial cells (HMEC-1 cells grown in endothelial culture medium) were established on opposing sides of a synthetic Bruch’s membrane (3 microns thick) constructed from B mori silk fibroin. Cell attachment was facilitated by pre-coating the fibroin membrane with vitronectin (for ARPE-19 cells) and gelatin (for HMEC-1 cells) respectively. The effects of tropoelastin on attachment of ARPE-19 cells was also examined. Barrier function was examined by measurement of trans-epithelial resistance (TER) using a voltohmmeter (EVOM-2). The phagocytic activity of the synthetic RPE was tested using vitronectin-coated microspheres (2 micron diameter FluoSpheres). In some cultures, membrane defects were created by puncturing within a 24 G needle. The architecture of the synthetic tissue before and after wounding was examined by confocal microscopy after staining for ZO-1 and F-actin. Results The RPE layer of the 3D model developed a cobblestoned morphology (validated by staining for ZO-1 and F-actin), displayed barrier function (validated by measurement of TER) and demonstrated cytoplasmic uptake of vitronectin-coated microspheres. Attachment of ARPE-19 cells to fibroin was unaffected by tropoelastin. Microvascular endothelial cells attached well to the gelatin-coated surface of the fibroin membrane and remained physically separated from the overlaying RPE layer. The fibroin membranes were amenable to puncturing without collapse thus providing the opportunity to study transmembrane migration of the endothelial cells. Conclusions Synthetic Bruch’s membranes constructed from silk fibroin, vitronectin and gelatin, support the co-cultivation of RPE cells and microvascular endothelial cells. The resulting RPE layer displays functions similar to that of native RPE and the entire tri-layered structure displays potential to be used as an in vitro model of choroidal neovascularization.

Fire performance of LSF walls made of hollow flange section studs

Load bearing Light Gauge Steel Frame (LSF) walls made of cold-formed steel studs and tracks are commonly used in residential and commercial buildings. Fire safety of these walls is essential to minimize the damage caused by fire related accidents. Past investigations on the fire performance of load bearing LSF wall systems have been limited to LSF walls made of conventional lipped channel section studs. Although structurally efficient hollow flange steel sections are available in the building industry, they are not used as LSF wall studs due to the lack of fire performance data for such walls. The hollow flange sections have torsionally rigid hollow flanges that eliminate the occurrence of local and distortional buckling to an extent, thereby increasing their structural efficiency. The weaknesses of hollow flange sections such as lower lateral distortional buckling capacity are also eliminated when they are used as studs of LSF walls as the plasterboard restraints will prevent any lateral movement. Therefore hollow flange sections can be considered as structurally more efficient studs for use in LSF wall systems. This paper reports the full scale fire tests of LSF walls made of hollow flange section studs under standard fire conditions. The frames were made of 1.6 mm thick and 150 mm deep hollow flange section studs with two closed rectangular flanges of 45 mm width x 15 mm depth. Dual plasterboards were attached on both sides of the test wall panels. The load ratio was varied and the failure times, the lateral deflections and the axial displacements of the test walls were obtained. The failure behaviour of LSF walls made of hollow flange section studs was found to be different to that of LSF walls made of conventional lipped channel section studs. The results of these fire tests show that hollow flange section studs have a higher potential in being used in load bearing LSF Walls.

Investigation of megavoltage beams and detectors for electronic portal imaging

Accuracy of dose delivery in external beam radiotherapy is usually verified with electronic portal imaging (EPI) in which the treatment beam is used to check the positioning of the patient. However the resulting megavoltage x-ray images suffer from poor quality. The image quality can be improved by developing a special operating mode in the linear accelerator. The existing treatment beam is modified such that it produces enough low-energy photons for imaging. In this work the problem of optimizing the beam/detector combination to achieve optimal electronic portal image quality is addressed. The linac used for this study was modified to produce two experimental photon beams. These beams, named Al6 and Al10, were non-flat and were produced by 4MeV electrons hitting aluminum targets, 6 and 10mm thick respectively. The images produced by a conventional EPI system (6MV treatment beam and camera-based EPID with a Cu plate & Gd2O2S screen ) were compared with the images produced by the experimental beams and various screens with the same camera). The contrast of 0.8cm bone equivalent material in 5 cm water increased from 1.5% for the conventional system to 11% for the combination of Al6 beam with a 200mg/cm2 Gd2O2S screen. The signal-to-noise ratio calculated for 1cGy flood field images increased by about a factor of two for the same EPI systems. The spatial resolution of the two imaging systems was comparable. This work demonstrates that significant improvements in portal image contrast can be obtained by simultaneous optimization of the linac spectrum and EPI detector.