Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Use of Property Rights Registers for sustainability : a Queensland Case Study

Sustainable natural resource management has been a concern of governments and legislators for the last 20 years. A key aspect of an effective management framework is easy access to information about rights and obligations in land and the natural resources in, on or below the land. Information about legal interests in land is managed through a Torrens register in each Australian State. These registers are primarily focused on the registration of a narrow group of legal interests in the land, and rights or obligations that fall outside of these recognised interests are not capable of registration. Practices have developed however for the recording of property rights in natural resources either on separate registers, with no link to the Torrens register or on a separate register managed by the Registrar of Titles but having no legal effect on the title to the land. This paper will discuss and analyse the various ways in which registers have been used in Queensland to provide access to information about rights in natural resources, and provide examples as to how this approach has impacted on the desire for sustainable management. It will also provide a critique of the Queensland model, and call for reform of the present system.

Conceptions of school based youth health nursing : a phenomenographic study

The School Based Youth Health Nurse Program was established in 1999 by the Queensland Government to fund school nurse positions in Queensland state high schools. Schools were required to apply for a School Based Youth Health Nurse during a five-phase recruitment process, managed by the health districts, and rolled out over four years. The only mandatory selection criterion for the position of School Based Youth Health Nurse was registration as a General Nurse and most School Based Youth Health Nurses are allocated to two state high schools. Currently, there are approximately 115 Full Time Equivalent School Based Youth Health Nurse positions across all Queensland state high schools. The literature review revealed an abundance of information about school nursing. Most of the literature came from the United Kingdom and the United States, who have a different model of school nursing to school based youth health nursing. However, there is literature to suggest school nursing is gradually moving from a disease-focused approach to a social view of health. The noticeable number of articles about, for example, drug and alcohol, mental health, and contemporary sexual health issues, is evidence of this change. Additionally, there is a significant the volume of literature about partnerships and collaboration, much of which is about health education, team teaching and how school nurses and schools do health business together. The surfacing of this literature is a good indication that school nursing is aligning with the broader national health priority areas. More particularly, the literature exposed a small but relevant and current body of research, predominantly from Queensland, about school based youth health nursing. However, there remain significant gaps in the knowledge about school based youth health nursing. In particular, there is a deficit about how School Based Youth Heath Nurses understand the experience of school based youth health nursing. This research aimed to reveal the meaning of the experience of school based youth health nursing. The research question was How do School Based Youth Health Nurses’ understand the experience of school based youth health nursing? This enquiry was instigated because the researcher, who had a positive experience of school based youth health nursing, considered it important to validate other School Based Youth Health Nurses’ experiences. Consequently, a comprehensive use of qualitative research was considered the most appropriate manner to explore this research question. Within this qualitative paradigm, the research framework consists of the epistemology of social constructionism, the theoretical perspective of interpretivism and the approach of phenomenography. After ethical approval was gained, purposeful and snowball sampling was used to recruit a sample of 16 participants. In-depth interviews, which were voluntary, confidential and anonymous, were mostly conducted in public venues and lasted from 40-75 minutes. The researcher also kept a researchers journal as another form of data collection. Data analysis was guided by Dahlgren and Fallsbergs’ (1991, p. 152) seven phases of data analysis which includes familiarization, condensation, comparison, grouping, articulating, labelling and contrasting. The most important finding in this research is the outcome space, which represents the entirety of the experience of school based youth health nursing. The outcome space consists of two components: inside the school environment and outside the school environment. Metaphorically and considered as whole-in-themselves, these two components are not discreet but intertwined with each other. The outcome space consists of eight categories. Each category of description is comprised of several sub-categories of description but as a whole, is a conception of school based youth health nursing. The eight conceptions of school based youth health nursing are: 1. The conception of school based youth health nursing as out there all by yourself. 2. The conception of school based youth health nursing as no real backup. 3. The conception of school based youth health nursing as confronted by many barriers. 4. The conception of school based youth health nursing as hectic and full-on. 5. The conception of school based youth health nursing as working together. 6. The conception of school based youth health nursing as belonging to school. 7. The conception of school based youth health nursing as treated the same as others. 8. The conception of school based youth health nursing as the reason it’s all worthwhile. These eight conceptions of school based youth health nursing are logically related and form a staged hierarchical relationship because they are not equally dependent on each other. The conceptions of school based youth health nursing are grouped according to negative, negative and positive and positive conceptions of school based youth health nursing. The conceptions of school based youth health nursing build on each other, from the bottom upwards, to reach the authorized, or the most desired, conception of school based youth health nursing. This research adds to the knowledge about school nursing in general but especially about school based youth health nursing specifically. Furthermore, this research has operational and strategic implications, highlighted in the negative conceptions of school based youth health nursing, for the School Based Youth Health Nurse Program. The researcher suggests the School Based Youth Health Nurse Program, as a priority, address the operational issues The researcher recommends a range of actions to tackle issues and problems associated with accommodation and information, consultations and referral pathways, confidentiality, health promotion and education, professional development, line management and School Based Youth Health Nurse Program support and school management and community. Strategically, the researcher proposes a variety of actions to address strategic issues, such as the School Based Youth Health Nurse Program vision, model and policy and practice framework, recruitment and retention rates and evaluation. Additionally, the researcher believes the findings of this research have the capacity to spawn a myriad of future research projects. The researcher has identified the most important areas for future research as confidentiality, information, qualifications and health outcomes.

Determining the psychosocial predictors of living, living-related, and posthumous organ donation

The worldwide organ shortage occurs despite people’s positive organ donation attitudes. The discrepancy between attitudes and behaviour is evident in Australia particularly, with widespread public support for organ donation but low donation and communication rates. This problem is compounded further by the paucity of theoretically based research to improve our understanding of people’s organ donation decisions. This program of research contributes to our knowledge of individual decision making processes for three aspects of organ donation: (1) posthumous (upon death) donation, (2) living donation (to a known and unknown recipient), and (3) providing consent for donation by communicating donation wishes on an organ donor consent register (registering) and discussing the donation decision with significant others (discussing). The research program used extended versions of the Theory of Planned Behaviour (TPB) and the Prototype/Willingness Model (PWM), incorporating additional influences (moral norm, self-identity, organ recipient prototypes), to explicate the relationship between people’s positive attitudes and low rates of organ donation behaviours. Adopting the TPB and PWM (and their extensions) as a theoretical basis overcomes several key limitations of the extant organ donation literature including the often atheoretical nature of organ donation research, thefocus on individual difference factors to construct organ donor profiles and the omission of important psychosocial influences (e.g., control perceptions, moral values) that may impact on people’s decision-making in this context. In addition, the use of the TPB and PWM adds further to our understanding of the decision making process for communicating organ donation wishes. Specifically, the extent to which people’s registering and discussing decisions may be explained by a reasoned and/or a reactive decision making pathway is examined (Stage 3) with the novel application of the TPB augmented with the social reaction pathway in the PWM. This program of research was conducted in three discrete stages: a qualitative stage (Stage 1), a quantitative stage with extended models (Stage 2), and a quantitative stage with augmented models (Stage 3). The findings of the research program are reported in nine papers which are presented according to the three aspects of organ donation examined (posthumous donation, living donation, and providing consent for donation by registering or discussing the donation preference). Stage One of the research program comprised qualitative focus groups/interviews with university students and community members (N = 54) (Papers 1 and 2). Drawing broadly on the TPB framework (Paper 1), content analysed responses revealed people’s commonly held beliefs about the advantages and disadvantages (e.g., prolonging/saving life), important people or groups (e.g., family), and barriers and motivators (e.g., a family’s objection to donation), related to living and posthumous organ donation. Guided by a PWM perspective, Paper Two identified people’s commonly held perceptions of organ donors (e.g., altruistic and giving), non-donors (e.g., self-absorbed and unaware), and transplant recipients (e.g., unfortunate, and in some cases responsible/blameworthy for their predicament). Stage Two encompassed quantitative examinations of people’s decision makingfor living (Papers 3 and 4) and posthumous (Paper 5) organ donation, and for registering and discussing donation wishes (Papers 6 to 8) to test extensions to both the TPB and PWM. Comparisons of health students’ (N = 487) motivations and willingness for living related and anonymous donation (Paper 3) revealed that a person’s donor identity, attitude, past blood donation, and knowing a posthumous donor were four common determinants of willingness, with the results highlighting students’ identification as a living donor as an important motive. An extended PWM is presented in Papers Four and Five. University students’ (N = 284) willingness for living related and anonymous donation was tested in Paper Four with attitude, subjective norm, donor prototype similarity, and moral norm (but not donor prototype favourability) predicting students’ willingness to donate organs in both living situations. Students’ and community members’ (N = 471) posthumous organ donation willingness was assessed in Paper Five with attitude, subjective norm, past behaviour, moral norm, self-identity, and prior blood donation all significantly directly predicting posthumous donation willingness, with only an indirect role for organ donor prototype evaluations. The results of two studies examining people’s decisions to register and/or discuss their organ donation wishes are reported in Paper Six. People’s (N = 24) commonly held beliefs about communicating their organ donation wishes were explored initially in a TPB based qualitative elicitation study. The TPB belief determinants of intentions to register and discuss the donation preference were then assessed for people who had not previously communicated their donation wishes (N = 123). Behavioural and normative beliefs were important determinants of registering and discussing intentions; however, control beliefs influenced people’s registering intentions only. Paper Seven represented the first empirical test of the role of organ transplant recipient prototypes (i.e., perceptions of organ transplant recipients) in people’s (N = 465) decisions to register consent for organ donation. Two factors, Substance Use and Responsibility, were identified and Responsibility predicted people’s organ donor registration status. Results demonstrated that unregistered respondents were the most likely to evaluate transplant recipients negatively. Paper Eight established the role of organ donor prototype evaluations, within an extended TPB model, in predicting students’ and community members’ registering (n = 359) and discussing (n = 282) decisions. Results supported the utility of an extended TPB and suggested a role for donor prototype evaluations in predicting people’s discussing intentions only. Strong intentions to discuss donation wishes increased the likelihood that respondents reported discussing their decision 1-month later. Stage Three of the research program comprised an examination of augmented models (Paper 9). A test of the TPB augmented with elements from the social reaction pathway in the PWM, and extensions to these models was conducted to explore whether people’s registering (N = 339) and discussing (N = 315) decisions are explained via a reasoned (intention) and/or social reaction (willingness) pathway. Results suggested that people’s decisions to communicate their organ donation wishes may be better explained via the reasoned pathway, particularly for registering consent; however, discussing also involves reactive elements. Overall, the current research program represents an important step toward clarifying the relationship between people’s positive organ donation attitudes but low rates of organ donation and communication behaviours. Support has been demonstrated for the use of extensions to two complementary theories, the TPB and PWM, which can inform future research aiming to explicate further the organ donation attitude-behaviour relationship. The focus on a range of organ donation behaviours enables the identification of key targets for future interventions encouraging people’s posthumous and living donation decisions, and communication of their organ donation preference.

A national evaluation of the Australian Occupational Therapy Competency Standards (1994): a multistakeholder perspective

This paper summarises results from an evaluation of the adequacy and utility of the Australian Competency Standards for Entry-Level Occupational Therapists © (OT AUSTRALIA, 1994a). It comprised a two-part study, incorporating an online survey of key national stakeholders (n = 26), and 13 focus groups (n = 152) conducted throughout Australia with occupational therapy clinicians, academics, OT AUSTRALIA association and Occupational Therapy Registration Board representatives, as well as university program accreditors. The key recommendations were that: (i) urgent revision to reflect contemporary practice, paradigms, approaches and frameworks is required; (ii) the standards should exemplify basic competence at graduation (not within two years following); (iii) a revision cycle of five years is required; (iv) the Australian Qualifications Framework should be retained, preceded by an introduction describing the scope and nature of occupational therapy practice in the national context; (v) access to the standards should be free and unrestricted to occupational therapists, students and the public via the OT AUSTRALIA (national) website; (vi) the standards should incorporate a succinct executive summary and additional tools or templates formatted to enable occupational therapists to develop professional portfolios and create working documents specific to their workplace; and (vii) language must accommodate contextual variation while striking an appropriate balance between providing instruction and encouraging innovation in practice.

Extending the dynamic range of robotic vision

Conventional cameras have limited dynamic range, and as a result vision-based robots cannot effectively view an environment made up of both sunny outdoor areas and darker indoor areas. This paper presents an approach to extend the effective dynamic range of a camera, achieved by changing the exposure level of the camera in real-time to form a sequence of images which collectively cover a wide range of radiance. Individual control algorithms for each image have been developed to maximize the viewable area across the sequence. Spatial discrepancies between images, caused by the moving robot, are improved by a real-time image registration process. The sequence is then combined by merging color and contour information. By integrating these techniques it becomes possible to operate a vision-based robot in wide radiance range scenes.

Incorporating uncertainty in environmental models informed by imagery

In this thesis, the issue of incorporating uncertainty for environmental modelling informed by imagery is explored by considering uncertainty in deterministic modelling, measurement uncertainty and uncertainty in image composition. Incorporating uncertainty in deterministic modelling is extended for use with imagery using the Bayesian melding approach. In the application presented, slope steepness is shown to be the main contributor to total uncertainty in the Revised Universal Soil Loss Equation. A spatial sampling procedure is also proposed to assist in implementing Bayesian melding given the increased data size with models informed by imagery. Measurement error models are another approach to incorporating uncertainty when data is informed by imagery. These models for measurement uncertainty, considered in a Bayesian conditional independence framework, are applied to ecological data generated from imagery. The models are shown to be appropriate and useful in certain situations. Measurement uncertainty is also considered in the context of change detection when two images are not co-registered. An approach for detecting change in two successive images is proposed that is not affected by registration. The procedure uses the Kolmogorov-Smirnov test on homogeneous segments of an image to detect change, with the homogeneous segments determined using a Bayesian mixture model of pixel values. Using the mixture model to segment an image also allows for uncertainty in the composition of an image. This thesis concludes by comparing several different Bayesian image segmentation approaches that allow for uncertainty regarding the allocation of pixels to different ground components. Each segmentation approach is applied to a data set of chlorophyll values and shown to have different benefits and drawbacks depending on the aims of the analysis.

An integrated information management model for ecologically sustainable development

Ecologically sustainable development has become a major feature of legal systems at the international, national and local levels throughout the world. In Australia, governments have responded to environmental crises by enacting legislation imposing obligations and restrictions over privately-owned land. Whilst these obligations and restrictions may well be necessary to achieve sustainability, the approach to management of information concerning these instruments is problematic. For example, management of information concerning obligations and restrictions in Queensland is fragmented, with some instruments registered or recorded on the land title register, some on external registers, and some information only available in the legislation itself. This approach is used in most Australian jurisdictions. This fragmented approach has led to two separate but interconnected problems. First, the Torrens system is no longer meeting its goal of providing a complete and accurate picture of title. Second, this uncoordinated approach to the management of land titles, and obligations and restrictions on land use, has created a barrier to sustainable management of natural resources. This is because compliance with environmental laws is impaired in the absence of easily accessible and accurate information. These problems demonstrate a clear need for reform in this area. To determine how information concerning these obligations and restrictions may be most effectively managed, this thesis will apply a comparative methodology and consider three case studies, which each utilise different models for management of this information. These jurisdictions will be assessed according to a set of guidelines for comparison to identify which features of their systems provide for effective management of information concerning obligations and restrictions on title and use. Based on this comparison, this thesis will devise a series of recommendations for an effective system for the management of information concerning obligations and restrictions on land title and use, taking into account any potential legal issues and barriers to implementation. This series of recommendations for reform will be supplemented by suggested draft legislative provisions.

Image acquisition and manipulation protocols for CT-PET fusion to improve the accuracy of gross tumour volume localisation for 3D conformal radiotherapy for lung cancer

Aims: To develop clinical protocols for acquiring PET images, performing CT-PET registration and tumour volume definition based on the PET image data, for radiotherapy for lung cancer patients and then to test these protocols with respect to levels of accuracy and reproducibility. Method: A phantom-based quality assurance study of the processes associated with using registered CT and PET scans for tumour volume definition was conducted to: (1) investigate image acquisition and manipulation techniques for registering and contouring CT and PET images in a radiotherapy treatment planning system, and (2) determine technology-based errors in the registration and contouring processes. The outcomes of the phantom image based quality assurance study were used to determine clinical protocols. Protocols were developed for (1) acquiring patient PET image data for incorporation into the 3DCRT process, particularly for ensuring that the patient is positioned in their treatment position; (2) CT-PET image registration techniques and (3) GTV definition using the PET image data. The developed clinical protocols were tested using retrospective clinical trials to assess levels of inter-user variability which may be attributed to the use of these protocols. A Siemens Somatom Open Sensation 20 slice CT scanner and a Philips Allegro stand-alone PET scanner were used to acquire the images for this research. The Philips Pinnacle3 treatment planning system was used to perform the image registration and contouring of the CT and PET images. Results: Both the attenuation-corrected and transmission images obtained from standard whole-body PET staging clinical scanning protocols were acquired and imported into the treatment planning system for the phantom-based quality assurance study. Protocols for manipulating the PET images in the treatment planning system, particularly for quantifying uptake in volumes of interest and window levels for accurate geometric visualisation were determined. The automatic registration algorithms were found to have sub-voxel levels of accuracy, with transmission scan-based CT-PET registration more accurate than emission scan-based registration of the phantom images. Respiration induced image artifacts were not found to influence registration accuracy while inadequate pre-registration over-lap of the CT and PET images was found to result in large registration errors. A threshold value based on a percentage of the maximum uptake within a volume of interest was found to accurately contour the different features of the phantom despite the lower spatial resolution of the PET images. Appropriate selection of the threshold value is dependant on target-to-background ratios and the presence of respiratory motion. The results from the phantom-based study were used to design, implement and test clinical CT-PET fusion protocols. The patient PET image acquisition protocols enabled patients to be successfully identified and positioned in their radiotherapy treatment position during the acquisition of their whole-body PET staging scan. While automatic registration techniques were found to reduce inter-user variation compared to manual techniques, there was no significant difference in the registration outcomes for transmission or emission scan-based registration of the patient images, using the protocol. Tumour volumes contoured on registered patient CT-PET images using the tested threshold values and viewing windows determined from the phantom study, demonstrated less inter-user variation for the primary tumour volume contours than those contoured using only the patient’s planning CT scans. Conclusions: The developed clinical protocols allow a patient’s whole-body PET staging scan to be incorporated, manipulated and quantified in the treatment planning process to improve the accuracy of gross tumour volume localisation in 3D conformal radiotherapy for lung cancer. Image registration protocols which factor in potential software-based errors combined with adequate user training are recommended to increase the accuracy and reproducibility of registration outcomes. A semi-automated adaptive threshold contouring technique incorporating a PET windowing protocol, accurately defines the geometric edge of a tumour volume using PET image data from a stand alone PET scanner, including 4D target volumes.

Examining psychosocial influences on speeding in Australian and Chinese contexts : a social learning approach

Speeding remains a significant contributing factor to road trauma internationally, despite increasingly sophisticated speed management strategies being adopted around the world. Increases in travel speed are associated with increases in crash risk and crash severity. As speed choice is a voluntary behaviour, driver perceptions are important to our understanding of speeding and, importantly, to designing effective behavioural countermeasures. The four studies conducted in this program of research represent a comprehensive approach to examining psychosocial influences on driving speeds in two countries that are at very different levels of road safety development: Australia and China. Akers’ social learning theory (SLT) was selected as the theoretical framework underpinning this research and guided the development of key research hypotheses. This theory was chosen because of its ability to encompass psychological, sociological, and criminological perspectives in understanding behaviour, each of which has relevance to speeding. A mixed-method design was used to explore the personal, social, and legal influences on speeding among car drivers in Queensland (Australia) and Beijing (China). Study 1 was a qualitative exploration, via focus group interviews, of speeding among 67 car drivers recruited from south east Queensland. Participants were assigned to groups based on their age and gender, and additionally, according to whether they self-identified as speeding excessively or rarely. This study aimed to elicit information about how drivers conceptualise speeding as well as the social and legal influences on driving speeds. The findings revealed a wide variety of reasons and circumstances that appear to be used as personal justifications for exceeding speed limits. Driver perceptions of speeding as personally and socially acceptable, as well as safe and necessary were common. Perceptions of an absence of danger associated with faster driving speeds were evident, particularly with respect to driving alone. An important distinction between the speed-based groups related to the attention given to the driving task. Rare speeders expressed strong beliefs about the need to be mindful of safety (self and others) while excessive speeders referred to the driving task as automatic, an absent-minded endeavour, and to speeding as a necessity in order to remain alert and reduce boredom. For many drivers in this study, compliance with speed limits was expressed as discretionary rather than mandatory. Social factors, such as peer and parental influence were widely discussed in Study 1 and perceptions of widespread community acceptance of speeding were noted. In some instances, the perception that ‘everybody speeds’ appeared to act as one rationale for the need to raise speed limits. Self-presentation, or wanting to project a positive image of self was noted, particularly with respect to concealing speeding infringements from others to protect one’s image as a trustworthy and safe driver. The influence of legal factors was also evident. Legal sanctions do not appear to influence all drivers to the same extent. For instance, fear of apprehension appeared to play a role in reducing speeding for many, although previous experiences of detection and legal sanctions seemed to have had limited influence on reducing speeding among some drivers. Disregard for sanctions (e.g., driving while suspended), fraudulent demerit point use, and other strategies to avoid detection and punishment were widely and openly discussed. In Study 2, 833 drivers were recruited from roadside service stations in metropolitan and regional locations in Queensland. A quantitative research strategy assessed the relative contribution of personal, social, and legal factors to recent and future self-reported speeding (i.e., frequency of speeding and intentions to speed in the future). Multivariate analyses examining a range of factors drawn from SLT revealed that factors including self-identity (i.e., identifying as someone who speeds), favourable definitions (attitudes) towards speeding, personal experiences of avoiding detection and punishment for speeding, and perceptions of family and friends as accepting of speeding were all significantly associated with greater self-reported speeding. Study 3 was an exploratory, qualitative investigation of psychosocial factors associated with speeding among 35 Chinese drivers who were recruited from the membership of a motoring organisation and a university in Beijing. Six focus groups were conducted to explore similar issues to those examined in Study 1. The findings of Study 3 revealed many similarities with respect to the themes that arose in Australia. For example, there were similarities regarding personal justifications for speeding, such as the perception that posted limits are unreasonably low, the belief that individual drivers are able to determine safe travel speeds according to personal comfort with driving fast, and the belief that drivers possess adequate skills to control a vehicle at high speed. Strategies to avoid detection and punishment were also noted, though they appeared more widespread in China and also appeared, in some cases, to involve the use of a third party, a topic that was not reported by Australian drivers. Additionally, higher perceived enforcement tolerance thresholds were discussed by Chinese participants. Overall, the findings indicated perceptions of a high degree of community acceptance of speeding and a perceived lack of risk associated with speeds that were well above posted speed limits. Study 4 extended the exploratory research phase in China with a quantitative investigation involving 299 car drivers recruited from car washes in Beijing. Results revealed a relatively inexperienced sample with less than 5 years driving experience, on average. One third of participants perceived that the certainty of penalties when apprehended was low and a similar proportion of Chinese participants reported having previously avoided legal penalties when apprehended for speeding. Approximately half of the sample reported that legal penalties for speeding were ‘minimally to not at all’ severe. Multivariate analyses revealed that past experiences of avoiding detection and punishment for speeding, as well as favourable attitudes towards speeding, and perceptions of strong community acceptance of speeding were most strongly associated with greater self-reported speeding in the Chinese sample. Overall, the results of this research make several important theoretical contributions to the road safety literature. Akers’ social learning theory was found to be robust across cultural contexts with respect to speeding; similar amounts of variance were explained in self-reported speeding in the quantitative studies conducted in Australia and China. Historically, SLT was devised as a theory of deviance and posits that deviance and conformity are learned in the same way, with the balance of influence stemming from the ways in which behaviour is rewarded and punished (Akers, 1998). This perspective suggests that those who speed and those who do not are influenced by the same mechanisms. The inclusion of drivers from both ends of the ‘speeding spectrum’ in Study 1 provided an opportunity to examine the wider utility of SLT across the full range of the behaviour. One may question the use of a theory of deviance to investigate speeding, a behaviour that could, arguably, be described as socially acceptable and prevalent. However, SLT seemed particularly relevant to investigating speeding because of its inclusion of association, imitation, and reinforcement variables which reflect the breadth of factors already found to be potentially influential on driving speeds. In addition, driving is a learned behaviour requiring observation, guidance, and practice. Thus, the reinforcement and imitation concepts are particularly relevant to this behaviour. Finally, current speed management practices are largely enforcement-based and rely on the principles of behavioural reinforcement captured within the reinforcement component of SLT. Thus, the application of SLT to a behaviour such as speeding offers promise in advancing our understanding of the factors that influence speeding, as well as extending our knowledge of the application of SLT. Moreover, SLT could act as a valuable theoretical framework with which to examine other illegal driving behaviours that may not necessarily be seen as deviant by the community (e.g., mobile phone use while driving). This research also made unique contributions to advancing our understanding of the key components and the overall structure of Akers’ social learning theory. The broader SLT literature is lacking in terms of a thorough structural understanding of the component parts of the theory. For instance, debate exists regarding the relevance of, and necessity for including broader social influences in the model as captured by differential association. In the current research, two alternative SLT models were specified and tested in order to better understand the nature and extent of the influence of differential association on behaviour. Importantly, the results indicated that differential association was able to make a unique contribution to explaining self-reported speeding, thereby negating the call to exclude it from the model. The results also demonstrated that imitation was a discrete theoretical concept that should also be retained in the model. The results suggest a need to further explore and specify mechanisms of social influence in the SLT model. In addition, a novel approach was used to operationalise SLT variables by including concepts drawn from contemporary social psychological and deterrence-based research to enhance and extend the way that SLT variables have traditionally been examined. Differential reinforcement was conceptualised according to behavioural reinforcement principles (i.e., positive and negative reinforcement and punishment) and incorporated concepts of affective beliefs, anticipated regret, and deterrence-related concepts. Although implicit in descriptions of SLT, little research has, to date, made use of the broad range of reinforcement principles to understand the factors that encourage or inhibit behaviour. This approach has particular significance to road user behaviours in general because of the deterrence-based nature of many road safety countermeasures. The concept of self-identity was also included in the model and was found to be consistent with the definitions component of SLT. A final theoretical contribution was the specification and testing of a full measurement model prior to model testing using structural equation modelling. This process is recommended in order to reduce measurement error by providing an examination of the psychometric properties of the data prior to full model testing. Despite calls for such work for a number of decades, the current work appears to be the only example of a full measurement model of SLT. There were also a number of important practical implications that emerged from this program of research. Firstly, perceptions regarding speed enforcement tolerance thresholds were highlighted as a salient influence on driving speeds in both countries. The issue of enforcement tolerance levels generated considerable discussion among drivers in both countries, with Australian drivers reporting lower perceived tolerance levels than Chinese drivers. It was clear that many drivers used the concept of an enforcement tolerance in determining their driving speed, primarily with the desire to drive faster than the posted speed limit, yet remaining within a speed range that would preclude apprehension by police. The quantitative results from Studies 2 and 4 added support to these qualitative findings. Together, the findings supported previous research and suggested that a travel speed may not be seen as illegal until that speed reaches a level over the prescribed enforcement tolerance threshold. In other words, the enforcement tolerance appears to act as a ‘de facto’ speed limit, replacing the posted limit in the minds of some drivers. The findings from the two studies conducted in China (Studies 2 and 4) further highlighted the link between perceived enforcement tolerances and a ‘de facto’ speed limit. Drivers openly discussed driving at speeds that were well above posted speed limits and some participants noted their preference for driving at speeds close to ‘50% above’ the posted limit. This preference appeared to be shaped by the perception that the same penalty would be imposed if apprehended, irrespective of what speed they travelling (at least up to 50% above the limit). Further research is required to determine whether the perceptions of Chinese drivers are mainly influenced by the Law of the People’s Republic of China or by operational practices. Together, the findings from both studies in China indicate that there may be scope to refine enforcement tolerance levels, as has happened in other jurisdictions internationally over time, in order to reduce speeding. Any attempts to do so would likely be assisted by the provision of information about the legitimacy and purpose of speed limits as well as risk factors associated with speeding because these issues were raised by Chinese participants in the qualitative research phase. Another important practical implication of this research for speed management in China is the way in which penalties are determined. Chinese drivers described perceptions of unfairness and a lack of transparency in the enforcement system because they were unsure of the penalty that they would receive if apprehended. Steps to enhance the perceived certainty and consistency of the system to promote a more equitable approach to detection and punishment would appear to be welcomed by the general driving public and would be more consistent with the intended theoretical (deterrence) basis that underpins the current speed enforcement approach. The use of mandatory, fixed penalties may assist in this regard. In many countries, speeding attracts penalties that are dependent on the severity of the offence. In China, there may be safety benefits gained from the introduction of a similar graduated scale of speeding penalties and fixed penalties might also help to address the issue of uncertainty about penalties and related perceptions of unfairness. Such advancements would be in keeping with the principles of best practice for speed management as identified by the World Health Organisation. Another practical implication relating to legal penalties, and applicable to both cultural contexts, relates to the issues of detection and punishment avoidance. These two concepts appeared to strongly influence speeding in the current samples. In Australia, detection avoidance strategies reported by participants generally involved activities that are not illegal (e.g., site learning and remaining watchful for police vehicles). The results from China were similar, although a greater range of strategies were reported. The most common strategy reported in both countries for avoiding detection when speeding was site learning, or familiarisation with speed camera locations. However, a range of illegal practices were also described by Chinese drivers (e.g., tampering with or removing vehicle registration plates so as to render the vehicle unidentifiable on camera and use of in-vehicle radar detectors). With regard to avoiding punishment when apprehended, a range of strategies were reported by drivers from both countries, although a greater range of strategies were reported by Chinese drivers. As the results of the current research indicated that detection avoidance was strongly associated with greater self-reported speeding in both samples, efforts to reduce avoidance opportunities are strongly recommended. The practice of randomly scheduling speed camera locations, as is current practice in Queensland, offers one way to minimise site learning. The findings of this research indicated that this practice should continue. However, they also indicated that additional strategies are needed to reduce opportunities to evade detection. The use of point-to-point speed detection (also known as sectio

A prototype system for the digital lodgement of spatial data

This dissertation develops the model of a prototype system for the digital lodgement of spatial data sets with statutory bodies responsible for the registration and approval of land related actions under the Torrens Title system. Spatial data pertain to the location of geographical entities together with their spatial dimensions and are classified as point, line, area or surface. This dissertation deals with a sub-set of spatial data, land boundary data that result from the activities performed by surveying and mapping organisations for the development of land parcels. The prototype system has been developed, utilising an event-driven paradigm for the user-interface, to exploit the potential of digital spatial data being generated from the utilisation of electronic techniques. The system provides for the creation of a digital model of the cadastral network and dependent data sets for an area of interest from hard copy records. This initial model is calibrated on registered control and updated by field survey to produce an amended model. The field-calibrated model then is electronically validated to ensure it complies with standards of format and content. The prototype system was designed specifically to create a database of land boundary data for subsequent retrieval by land professionals for surveying, mapping and related activities. Data extracted from this database are utilised for subsequent field survey operations without the need to create an initial digital model of an area of interest. Statistical reporting of differences resulting when subsequent initial and calibrated models are compared, replaces the traditional checking operations of spatial data performed by a land registry office. Digital lodgement of survey data is fundamental to the creation of the database of accurate land boundary data. This creation of the database is fundamental also to the efficient integration of accurate spatial data about land being generated by modem technology such as global positioning systems, and remote sensing and imaging, with land boundary information and other information held in Government databases. The prototype system developed provides for the delivery of accurate, digital land boundary data for the land registration process to ensure the continued maintenance of the integrity of the cadastre. Such data should meet also the more general and encompassing requirements of, and prove to be of tangible, longer term benefit to the developing, electronic land information industry.

A cybernetic approach to land management issues

This work is a digital version of a dissertation that was first submitted in partial fulfillment of the Degree of Doctor of Philosophy at the Queensland University of Technology (QUT) in March 1994. The work was concerned with problems of self-organisation and organisation ranging from local to global levels of hierarchy. It considers organisations as living entities from local to global things that a living entity – more particularly, an individual, a body corporate or a body politic - must know and do to maintain an existence – that is to remain viable – or to be sustainable. The term ‘land management’ as used in 1994 was later subsumed into a more general concept of ‘natural resource management’ and then merged with ideas about sustainable socioeconomic and sustainable ecological development. The cybernetic approach contains many cognitive elements of human observation, language and learning that combine into production processes. The approach tends to highlight instances where systems (or organisations) can fail because they have very little chance of succeeding. Thus there are logical necessities as well as technical possibilities in designing, constructing, operating and maintaining production systems that function reliably over extended periods. Chapter numbers and titles to the original thesis are as follows: 1. Land management as a problem of coping with complexity 2. Background theory in systems theory and cybernetic principles 3. Operationalisation of cybernetic principles in Beer’s Viable System Model 4. Issues in the design of viable cadastral surveying and mapping organisation 5. An analysis of the tendency for fragmentation in surveying and mapping organisation 6. Perambulating the boundaries of Sydney – a problem of social control under poor standards of literacy 7. Cybernetic principles in the process of legislation 8. Closer settlement policy and viability in agricultural production 9. Rate of return in leasing Crown lands