Learnings, case studies and guidelines for establishing shared and collaborative service delivery in the non-government sector: Evaluation of the Multi-Tenant Service Centre (MTSC) Pilots Project

This report presents learnings, case studies, guidelines and resources for non-government organisations that are planning to implement shared or collaborative arrangements with other agencies. It summarises results from an evaluation of the implementation phase of the Multi-Tenant Service Centre (MTSC) Pilots Project, which was completed in June 2008. This evaluation shows that developing and implementing shared and collaborative arrangements is a complex process that presents many risks, challenges and barriers to success, but can have many potential benefits for non government organisations. As this report makes clear, there is no ‘one size fits all’ approach to this process. The MTSC Pilots Project was conducted by the Department of Communities (DoC), Queensland Government, as part of its Strengthening Non-Government Organisations strategy. The objective of the MTSC Pilots initiative was to co-locate separate service providers in an appropriately located centre, operating with effective and transparent management, which enabled service providers to improve client services. Three MTSC consortiums in Mackay, Caboolture and Toowoomba were selected as the pilots over a four year period from 2006 – 2010.

Experimental studies of cold-formed steel hollow section columns at elevated temperatures

This paper reports the details of an experimental study of cold-formed steel hollow section columns at ambient and elevated temperatures. In this study the global buckling behaviour of cold-formed Square Hollow Section (SHS) slender columns under axial compression was investigated at various uniform elevated temperatures up to 700℃. The results of these column tests are reported in this paper, which include the buckling/failure modes at elevated temperatures, and ultimate load versus temperature curves. Finite element models of tested columns were also developed and their behaviour and ultimate capacities at ambient and elevated temperatures were studied. Fire design rules given in European and American standards including the Direct Strength Method (DSM) based design rules were used to predict the ultimate capacities of tested columns at elevated temperatures. Elevated temperature mechanical properties and stress-strain models given in European steel design standards and past researches were used with design rules and finite element models to investigate their effects on SHS column capacities. Comparisons of column capacities from tests and finite element analyses with those predicted by current design rules were used to determine the accuracy of currently available column design rules in predicting the capacities of SHS columns at elevated temperatures and the need to use appropriate elevated temperature material stress-strain models. This paper presents the important findings derived from the comparisons of these column capacities.

Reconstruction of a multi-vent kimberlite eruption from deposit and host rock characteristics: Jericho kimberlite, Nunavut, Canada

The Jericho kimberlite (173.1. ±. 1.3. Ma) is a small (~. 130. ×. 70. m), multi-vent system that preserves products from deep (>. 1. km?) portions of kimberlite vents. Pit mapping, drill core examination, petrographic study, image analysis of olivine crystals (grain size distributions and shape studies), and compositional and mineralogical studies, are used to reconstruct processes from near-surface magma ascent to kimberlite emplacement and alteration. The Jericho kimberlite formed by multiple eruptions through an Archean granodiorite batholith that was overlain by mid-Devonian limestones ~. 1. km in thickness. Kimberlite magma ascended through granodiorite basement by dyke propagation but ascended through limestone, at least in part, by locally brecciating the host rocks. After the first explosive breakthrough to surface, vent deepening and widening occurred by the erosive forces of the waxing phase of the eruption, by gravitationally induced failures as portions of the vent margins slid into the vent and, in the deeper portions of the vent (>. 1. km), by scaling, as thin slabs burst from the walls into the vent. At currently exposed levels, coherent kimberlite (CK) dykes (<. 40. cm thick) are found to the north and south of the vent complex and represent the earliest preserved in-situ products of Jericho magmatism. Timing of CK emplacement on the eastern side of the vent complex is unclear; some thick CK (15-20. m) may have been emplaced after the central vent was formed. Explosive eruptive products are preserved in four partially overlapping vents that are roughly aligned along strike with the coherent kimberlite dyke. The volcaniclastic kimberlite (VK) facies are massive and poorly sorted, with matrix- to clast-supported textures. The VK facies fragmented by dry, volatile-driven processes and were emplaced by eruption column collapse back into the volcanic vents. The first explosive products, poorly preserved because of partial destruction by later eruptions, are found in the central-east vent and were formed by eruption column collapse after the vent was largely cleared of country rock debris. The next active vent was either the north or south vent. Collapse of the eruption column, linked to a vent widening episode, resulted in coeval avalanching of pipe margin walls into the north vent, forming interstratified lenses of country rock-rich boulder breccias in finer-grained volcaniclastic kimberlite. South vent kimberlite has similar characteristics to kimberlite of the north vent and likely formed by similar processes. The final eruptive phase formed olivine-rich and moderately sorted deposits of the central vent. Better sorting is attributed to recycling of kimberlite debris by multiple eruptions through the unconsolidated volcaniclastic pile and associated collapse events. Post-emplacement alteration varies in intensity, but in all cases, has overprinted the primary groundmass and matrix, in CK and VK, respectively. Erosion has since removed all limestone cover.

Studies of water and electrolyte movement from oral rehydration solutions (rice- and glucose-based) across a normal and secreting gut using a dual isotope tracer technique in a rat perfusion model

Aims: To establish a model to measure bidirectional flow of water from a glucose oral rehydration solution (G-ORS) and a newly developed rice-based oral rehydration solution (R-ORS) using a dual isotope tracer technique in a rat perfusion model. To measure net water, sodium and potassium absorption from the ORS. Methods: In viva steady-state perfusion studies were carried out in normal and secreting (induced by cholera toxin) rat small intestine (n = 11 in each group). To determine bidirectional flow of water from the ORS the animals were initially labelled with tritium, and deuterium was added to the perfusion solution. Sequential perfusate and blood samples were collected after attainment of steady-state conditions and analysed for water and electrolyte content. Results: There was a significant increase in net water absorption from the R-ORS compared to the G-ORS in both the normal (P < 0.02) and secreting intestine (P < 0.05). Water efflux was significantly reduced in the R-ORS group compared to the G-ORS group in both the normal (P < 0.01) and the secreting intestine (P < 0.01). There was an increase in sodium absorption in the R-ORS group compared to the G-ORS. The G-ORS produced a significantly greater blood glucose level at 75 min compared to the R-ORS (P < 0.03) in the secreting intestine. Conclusions: This study demonstrates the improved water absorption from a rice-based ORS in both the normal and secreting intestine. Evidence that the absorption of water may be influenced by the osmolality of the ORS was also demonstrated.

Understanding the information dynamics of medication administration in residential aged care facilities (RACFs): A prerequisite for design of effective ICT systems

Medication information is a critical part of the information required to ensure residents' safety in the highly collaborative care context of RACFs. Studies report poor medication information as a barrier to improve medication management in RACFs. Research exploring medication work practices in aged care settings remains limited. This study aimed to identify contextual and work practice factors contributing to breakdowns in medication information exchange in RACFs in relation to the medication administration process. We employed non-participant observations and semi-structured interviews to explore information practices in three Australian RACFs. Findings identified inefficiencies due to lack of information timeliness, manual stock management, multiple data transcriptions, inadequate design of essential documents such as administration sheets and a reliance on manual auditing procedures. Technological solutions such as electronic medication administration records offer opportunities to overcome some of the identified problems. However these interventions need to be designed to align with the collaborative team based processes they intend to support.

Editorial of "International Journal of Critical Indigenous Studies Volume 2, Number 1, 2009"

Over the past two decades neo liberalism has shaped global economic activity. The international reach of the current economic crisis propelled by the subprime mortgage meltdown in the United States has affected Indigenous communities in different ways to those whose investments were depleted by the Wall Street activities of an unregulated corporate and banking sector. Throughout this roller coaster economic ride the low socio-economic position of Indigenous peoples continued in Canada, the United States of America, New Zealand, Hawaii and Australia. The logic, or illogic of capital, failed to extend the boom of the economic upturn to Indigenous peoples, but is poised to extend the repercussions of the current downturn deep into Indigenous lives. The consistency of the Indigenous socio-economic position across these countries, even where treaties exist, indicates that the phenomenon is based on a shared Indigenous reality. In this special edition, the commonality in the way in which Indigenous people are engaged in and positioned by market forces and regulation by their respective nation states is proposed as one of the foundation plates of that Indigenous positioning...

Editorial of "International Journal of Critical Indigenous Studies Volume 2, Number 2, 2009"

This edition of the International Critical Indigenous Studies Journal, our second for 2009 takes alternative understandings as its theme. All four articles in this edition attend to citizenship and Indigenous sovereignty though in different ways...

Editorial of "International Journal of Critical Indigenous Studies, Volume 7, Number 1, 2014"

This edition testifies to the broad international reach of the journal, with contributions variously concerned with Arctic Indigenous communities, the Métis of Canada, Native Hawaiians and Māori of Aotearoa (New Zealand). Two articles stress the need to work collaboratively and respectfully with Indigenous populations whilst conducting research. The first, by Gwen Healey, notes the increased interest in health research in the Arctic, particularly with Inuit populations. Healy seeks to add to the growing body of literature concerned with Indigenous ways of knowing by highlighting Inuit concepts that inform an effective Arctic research model. The second, by primary author Peter Hutchinson and a range of co-contributors, highlights the ways in which Métis collaborators working in health developed a participatory Indigenous research method that was unique in that it foregrounded Métis relationships and relationality. In so doing, the researchers were able to give substance to otherwise staid policy statements about the need for good ethical research conduct.

Experimental studies on comparison of microwave curing and thermal curing of epoxy resins used for alternative mould materials

In this present work attempts have been made to study the glass transition temperature of alternative mould materials by using both microwave heating and conventional oven heating. In this present work three epoxy resins, namely R2512, R2515 and R2516, which are commonly used for making injection moulds have been used in combination with two hardeners H2403 and H2409. The magnetron microwave generator used in this research is operating at a frequency of 2.45 GHz with a hollow rectangular waveguide. In order to distinguish the effects between the microwave and conventional heating, a number of experiments were performed to test their mechanical properties such as tensile and flexural strengths. Additionally, differential scanning calorimeter technique was implemented to measure the glass transition temperature on both microwave and conventional heating. This study provided necessary evidences to establish that microwave heated mould materials resulted with higher glass transition temperature than the conventional heating. Finally, attempts were also made to study the microstructure of microwave-cured materials by using a scanning electron microscope in order to analyze the morphology of cured specimens.