Model-driven service engineering in home telecare

Health care systems are highly dynamic not just due to developments and innovations in diagnosis and treatments, but also by virtue of emerging management techniques supported by modern information and communication technology. A multitude of stakeholders such as patients, nurses, general practitioners or social carers can be integrated by modeling complex interactions necessary for managing the provision and consumption of health care services. Furthermore, it is the availability of Service-oriented Architecture (SOA) that supports those integration efforts by enabling the flexible and reusable composition of autonomous, loosely-coupled and web-enabled software components. However, there is still the gap between SOA and predominantly business-oriented perspectives (e.g. business process models). The alignment of both views is crucial not just for the guided development of SOA but also for the sustainable evolution of holistic enterprise architectures. In this paper, we combine the Semantic Object Model (SOM) and the Business Process Modelling Notation (BPMN) towards a model-driven approach to service engineering. By addressing a business system in Home Telecare and deriving a business process model, which can eventually be controlled and executed by machines; in particular by composed web services, the full potential of a process-centric SOA is exploited.

Degradation modeling and monitoring of machines using operation-specific hidden Markov models

In this paper, a novel data-driven approach to monitoring of systems operating under variable operating conditions is described. The method is based on characterizing the degradation process via a set of operation-specific hidden Markov models (HMMs), whose hidden states represent the unobservable degradation states of the monitored system while its observable symbols represent the sensor readings. Using the HMM framework, modeling, identification and monitoring methods are detailed that allow one to identify a HMM of degradation for each operation from mixed-operation data and perform operation-specific monitoring of the system. Using a large data set provided by a major manufacturer, the new methods are applied to a semiconductor manufacturing process running multiple operations in a production environment.

Bridging experiments, models and simulations : an integrative approach to validation in computational cardiac electrophysiology

Computational models in physiology often integrate functional and structural information from a large range of spatio-temporal scales from the ionic to the whole organ level. Their sophistication raises both expectations and scepticism concerning how computational methods can improve our understanding of living organisms and also how they can reduce, replace and refine animal experiments. A fundamental requirement to fulfil these expectations and achieve the full potential of computational physiology is a clear understanding of what models represent and how they can be validated. The present study aims at informing strategies for validation by elucidating the complex interrelations between experiments, models and simulations in cardiac electrophysiology. We describe the processes, data and knowledge involved in the construction of whole ventricular multiscale models of cardiac electrophysiology. Our analysis reveals that models, simulations, and experiments are intertwined, in an assemblage that is a system itself, namely the model-simulation-experiment (MSE) system. Validation must therefore take into account the complex interplay between models, simulations and experiments. Key points for developing strategies for validation are: 1) understanding sources of bio-variability is crucial to the comparison between simulation and experimental results; 2) robustness of techniques and tools is a pre-requisite to conducting physiological investigations using the MSE system; 3) definition and adoption of standards facilitates interoperability of experiments, models and simulations; 4) physiological validation must be understood as an iterative process that defines the specific aspects of electrophysiology the MSE system targets, and is driven by advancements in experimental and computational methods and the combination of both.

Principles of goal-directed spatial robot navigation in biomimetic models

Mobile robots and animals alike must effectively navigate their environments in order to achieve their goals. For animals goal-directed navigation facilitates finding food, seeking shelter or migration; similarly robots perform goal-directed navigation to find a charging station, get out of the rain or guide a person to a destination. This similarity in tasks extends to the environment as well; increasingly, mobile robots are operating in the same underwater, ground and aerial environments that animals do. Yet despite these similarities, goal-directed navigation research in robotics and biology has proceeded largely in parallel, linked only by a small amount of interdisciplinary research spanning both areas. Most state-of-the-art robotic navigation systems employ a range of sensors, world representations and navigation algorithms that seem far removed from what we know of how animals navigate; their navigation systems are shaped by key principles of navigation in ‘real-world’ environments including dealing with uncertainty in sensing, landmark observation and world modelling. By contrast, biomimetic animal navigation models produce plausible animal navigation behaviour in a range of laboratory experimental navigation paradigms, typically without addressing many of these robotic navigation principles. In this paper, we attempt to link robotics and biology by reviewing the current state of the art in conventional and biomimetic goal-directed navigation models, focusing on the key principles of goal-oriented robotic navigation and the extent to which these principles have been adapted by biomimetic navigation models and why.

The Fleet Store : devising a public retail exhibition to promote creative, innovative and sustainable business models for emerging fashion designers

1.Description of the Work The Fleet Store was devised as a creative output to establish an exhibition linked to a fashion business model where emerging designers were encouraged to research new and innovative strategies for creating design-driven and commercial collections for a public consumer. This was a project that was devised to break down the perceptions of emerging fashion designers that designing commercial collections linked to a sustainable business model is a boring and unnecessary process. The focus was to demystify the business of fashion and to link its importance to a design-driven and public outcome that is more familiar to fashion designers. The criterion for participation was that all designers had to be registered as a business with the Australian Taxation Office. Designers were chosen from the Creative Enterprise Australia Fashion Business Incubator, the QUT fashion graduate alumni and current QUT fashion design and double degree (fashion and business) students with existing businesses. The project evolved from a series of collaborative workshops where designers were introduced to new and innovative creative industries’ business models and the processes, costings and timings involved to create a niche, sustainable business for a public exhibition of design-driven commercial collections. All designers initiated their own business infra-structure but were then introduced to the concept of collaboration for successful and profitable exhibition and business outcomes. Collaborative strategies such as crowd funding, crowd sourcing, peer to peer mentoring and manufacturing were all researched, and strategies for the establishment of the retail exhibition were all devised in a collaborative environment. All participants also took on roles outside their ‘designer’ background to create a retail exhibition that was creative but also had critical mass and aesthetic for the consumer. The Fleet Store ‘popped up’ for 2 weeks (10 days), in a heritage-listed building in an inner city location. Passers-by were important, but the main consumer was enlisted by the use of interest and investment from crowd sourcing, crowd funding, ethical marketing, corporate social responsibility projects and collaborative public relations and social media strategies. The research has furthered discussion on innovative strategies for emerging fashion designers to initiate and maintain sustainable businesses and suggests that collaboration combined with a design-driven and business focus can create a sustainable and economically viable retail exhibition. 2. Research Statement Research Background The research field involved developing a new ethical, design-driven, collaborative and sustainable model for fashion design practice and management. The research asked can a public, design-driven, collaborative retail exhibition create a platform for promoting creative, innovative and sustainable business models for emerging fashion designers. The methodology was primarily practice-led as all participants were designers in their own right and the project manager acted as a mentor and curator to guide the process and analyse the potential of the research question. The Fleet Store offers new knowledge in design practice and management; with the creation of a model where design outcomes and business models are inextricably linked to the success of the creative output. Key innovations include extending the commercialisation of emerging fashion businesses by creating a curated retail gallery for collaborative and sustainable strategies to support niche fashion designer labels. This has contributed to a broader conversation on how to nurture and sustain competitive Australian fashion designers/labels. Research Contribution and Significance The Fleet Store has contributed to a growing body of research into innovative and sustainable business models for niche fashion and creative industries’ practitioners. All participants have maintained their business infra-structure and many are currently growing their businesses, using the strategies tested for the Fleet Store. The exhibition space was visited by over 1,000 people and sales of $27,000 were made in 10 days of opening. (Follow up sales of $3,000 has also been reported.) Three of the designers were ‘discovered’ from the exhibition and have received substantial orders from high profile national buyers and retailers for next season delivery. Several participants have since collaborated to create other pop up retail environments and are now mentoring other emerging designers on the significance of a collaborative retail exhibition to consolidate niche business models for emerging fashion designers.

Quantifying uncertainty in parameter estimates for stochastic models of collective cell spreading using approximate Bayesian computation

Wound healing and tumour growth involve collective cell spreading, which is driven by individual motility and proliferation events within a population of cells. Mathematical models are often used to interpret experimental data and to estimate the parameters so that predictions can be made. Existing methods for parameter estimation typically assume that these parameters are constants and often ignore any uncertainty in the estimated values. We use approximate Bayesian computation (ABC) to estimate the cell diffusivity, D, and the cell proliferation rate, λ, from a discrete model of collective cell spreading, and we quantify the uncertainty associated with these estimates using Bayesian inference. We use a detailed experimental data set describing the collective cell spreading of 3T3 fibroblast cells. The ABC analysis is conducted for different combinations of initial cell densities and experimental times in two separate scenarios: (i) where collective cell spreading is driven by cell motility alone, and (ii) where collective cell spreading is driven by combined cell motility and cell proliferation. We find that D can be estimated precisely, with a small coefficient of variation (CV) of 2–6%. Our results indicate that D appears to depend on the experimental time, which is a feature that has been previously overlooked. Assuming that the values of D are the same in both experimental scenarios, we use the information about D from the first experimental scenario to obtain reasonably precise estimates of λ, with a CV between 4 and 12%. Our estimates of D and λ are consistent with previously reported values; however, our method is based on a straightforward measurement of the position of the leading edge whereas previous approaches have involved expensive cell counting techniques. Additional insights gained using a fully Bayesian approach justify the computational cost, especially since it allows us to accommodate information from different experiments in a principled way.

Curiosity driven reinforcement learning for motion planning on humanoids

Most previous work on artificial curiosity (AC) and intrinsic motivation focuses on basic concepts and theory. Experimental results are generally limited to toy scenarios, such as navigation in a simulated maze, or control of a simple mechanical system with one or two degrees of freedom. To study AC in a more realistic setting, we embody a curious agent in the complex iCub humanoid robot. Our novel reinforcement learning (RL) framework consists of a state-of-the-art, low-level, reactive control layer, which controls the iCub while respecting constraints, and a high-level curious agent, which explores the iCub's state-action space through information gain maximization, learning a world model from experience, controlling the actual iCub hardware in real-time. To the best of our knowledge, this is the first ever embodied, curious agent for real-time motion planning on a humanoid. We demonstrate that it can learn compact Markov models to represent large regions of the iCub's configuration space, and that the iCub explores intelligently, showing interest in its physical constraints as well as in objects it finds in its environment.

Some major problems with existing models and terminology associated with kimberlite pipes from a volcanological perspective, and some suggestions

Five significant problems hinder advances in understanding of the volcanology of kimberlites: (1) kimberlite geology is very model driven; (2) a highly genetic terminology drives deposit or facies interpretation; (3) the effects of alteration on preserved depositional textures have been grossly underestimated; (4) the level of understanding of the physical process significance of preserved textures is limited; and, (5) some inferred processes and deposits are not based on actual, modern volcanological processes. These issues need to be addressed in order to advance understanding of kimberlite volcanological pipe forming processes and deposits. The traditional, steep-sided southern African pipe model (Class I) consists of a steep tapering pipe with a deep root zone, a middle diatreme zone and an upper crater zone (if preserved). Each zone is thought to be dominated by distinctive facies, respectively: hypabyssal kimberlite (HK, descriptively called here massive coherent porphyritic kimberlite), tuffisitic kimberlite breccia (TKB, descriptively here called massive, poorly sorted lapilli tuff) and crater zone facies, which include variably bedded pyroclastic kimberlite and resedimented and reworked volcaniclastic kimberlite (RVK). Porphyritic coherent kimberlite may, however, also be emplaced at different levels in the pipe, as later stage intrusions, as well as dykes in the surrounding country rock. The relationship between HK and TKB is not always clear. Sub-terranean fluidisation as an emplacement process is a largely unsubstantiated hypothesis; modern in-vent volcanological processes should initially be considered to explain observed deposits. Crater zone volcaniclastic deposits can occur within the diatreme zone of some pipes, indicating that the pipe was largely empty at the end of the eruption, and subsequently began to fill-in largely through resedimentation and sourcing of pyroclastic deposits from nearby vents. Classes II and III Canadian kimberlite models have a more factual, descriptive basis, but are still inadequately documented given the recency of their discovery. The diversity amongst kimberlite bodies suggests that a three-model classification is an over-simplification. Every kimberlite is altered to varying degrees, which is an intrinsic consequence of the ultrabasic composition of kimberlite and the in-vent context; few preserve original textures. The effects of syn- to post-emplacement alteration on original textures have not been adequately considered to date, and should be back-stripped to identify original textural elements and configurations. Applying sedimentological textural configurations as a guide to emplacement processes would be useful. The traditional terminology has many connotations about spatial position in pipe and of process. Perhaps the traditional terminology can be retained in the industrial situation as a general lithofacies-mining terminological scheme because it is so entrenched. However, for research purposes a more descriptive lithofacies terminology should be adopted to facilitate detailed understanding of deposit characteristics, important variations in these, and the process origins. For example every deposit of TKB is different in componentry, texture, or depositional structure. However, because so many deposits in many different pipes are called TKB, there is an implication that they are all similar and that similar processes were involved, which is far from clear.

Designing innovative business models with a framework that promotes experimentation

Purpose – Business models to date have remained the creation of management, however, it is the belief of the authors that designers should be critically approaching, challenging and creating new business models as part of their practice. This belief portrays a new era where business model constructs become the new design brief of the future and fuel design and innovation to work together at the strategic level of an organisation. Design/methodology/approach – The purpose of this paper is to explore and investigate business model design. The research followed a deductive structured qualitative content analysis approach utilizing a predetermined categorization matrix. The analysis of forty business cases uncovered commonalities of key strategic drivers behind these innovative business models. Findings – Five business model typologies were derived from this content analysis, from which quick prototypes of new business models can be created. Research limitations/implications – Implications from this research suggest there is no “one right” model, but rather through experimentation, the generation of many unique and diverse concepts can result in greater possibilities for future innovation and sustained competitive advantage. Originality/value – This paper builds upon the emerging research and exploration into the importance and relevance of dynamic, design-driven approaches to the creation of innovative business models. These models aim to synthesize knowledge gained from real world examples into a tangible, accessible and provoking framework that provide new prototyping templates to aid the process of business model experimentation.

An account and analysis of the implementation of various ebook business models at QUT, Australia

QUT (Queensland University of Technology) is a leading university based in the city of Brisbane, Queensland, Australia and is a selectively research intensive university with 2,500 higher degree research students and an overall student population of 45,000 students. The transition from print to online resources is largely completed and the library now provides access to 450,000 print books, 1,000 print journals, 600,000 ebooks, 120,000 ejournals and 100,000 online videos. The ebook collection is now used three times as much as the print book collection. This paper focuses on QUT Library’s ebook strategy and the challenges of building and managing a rapidly growing collection of ebooks using a range of publishers, platforms, and business and financial models. The paper provides an account of QUT Library’s experiences in using Patron Driven Acquisition (PDA) using eBook Library (EBL); the strategic procurement of publisher and subject collections by lease and outright purchase models, the more recent transition to Evidence Based Selection (EBS) options provided by some publishers, and its piloting of etextbook models. The paper provides an in-depth analysis of each of these business models at QUT, focusing on access verses collection development, usage, cost per use, and value for money.

Reconciling transport models across scales: The role of volume exclusion

Diffusive transport is a universal phenomenon, throughout both biological and physical sciences, and models of diffusion are routinely used to interrogate diffusion-driven processes. However, most models neglect to take into account the role of volume exclusion, which can significantly alter diffusive transport, particularly within biological systems where the diffusing particles might occupy a significant fraction of the available space. In this work we use a random walk approach to provide a means to reconcile models that incorporate crowding effects on different spatial scales. Our work demonstrates that coarse-grained models incorporating simplified descriptions of excluded volume can be used in many circumstances, but that care must be taken in pushing the coarse-graining process too far.

In Situ Observation of the Thermal Decomposition of Weddelite by Heating Stage Environmental Scanning Electron Microscopy

The morphological and chemical changes occurring during the thermal decomposition of weddelite, CaC2O4·2H2O, have been followed in real time in a heating stage attached to an Environmental Scanning Electron Microscope operating at a pressure of 2 Torr, with a heating rate of 10 °C/min and an equilibration time of approximately 10 min. The dehydration step around 120 °C and the loss of CO around 425 °C do not involve changes in morphology, but changes in the composition were observed. The final reaction of CaCO3 to CaO while evolving CO2 around 600 °C involved the formation of chains of very small oxide particles pseudomorphic to the original oxalate crystals. The change in chemical composition could only be observed after cooling the sample to 350 °C because of the effects of thermal radiation.