Genome-Wide Association Studies of Asthma in Population-Based Cohorts Confirm Known and Suggested Loci and Identify an Additional Association near HLA

Rationale: Asthma has substantial morbidity and mortality and a strong genetic component, but identification of genetic risk factors is limited by availability of suitable studies. Objectives: To test if population-based cohorts with self-reported physician-diagnosed asthma and genome-wide association (GWA) data could be used to validate known associations with asthma and identify novel associations. Methods: The APCAT (Analysis in Population-based Cohorts of Asthma Traits) consortium consists of 1,716 individuals with asthma and 16,888 healthy controls from six European-descent population-based cohorts. We examined associations in APCAT of thirteen variants previously reported as genome-wide significant (P<5x10-8) and three variants reported as suggestive (P<5×10-7). We also searched for novel associations in APCAT (Stage 1) and followed-up the most promising variants in 4,035 asthmatics and 11,251 healthy controls (Stage 2). Finally, we conducted the first genome-wide screen for interactions with smoking or hay fever. Main Results: We observed association in the same direction for all thirteen previously reported variants and nominally replicated ten of them. One variant that was previously suggestive, rs11071559 in RORA, now reaches genome-wide significance when combined with our data (P = 2.4×10-9). We also identified two genome-wide significant associations: rs13408661 near IL1RL1/IL18R1 (PStage1+Stage2 = 1.1x10-9), which is correlated with a variant recently shown to be associated with asthma (rs3771180), and rs9268516 in the HLA region (PStage1+Stage2 = 1.1x10-8), which appears to be independent of previously reported associations in this locus. Finally, we found no strong evidence for gene-environment interactions with smoking or hay fever status. Conclusions: Population-based cohorts with simple asthma phenotypes represent a valuable and largely untapped resource for genetic studies of asthma. © 2012 Ramasamy et al.

Association of IL23R and ERAP1 genes with ankylosing spondylitis in a Portuguese population

Objective: Association between ankylosing spondylitis (AS) and two genes, ERAP1 and IL23R, has recently been reported in North American and British populations. The population attributable risk fraction for ERAP1 in this study was 25%, and for IL23R, 9%. Confirmation of these findings to ERAP1 in other ethnic groups has not yet been demonstrated. We sought to test the association between single nucleotide polymorphisms (SNPs) in these genes and susceptibility to AS among a Portuguese population. We also investigated the role of these genes in clinical manifestations of AS, including age of symptom onset, the Bath Ankylosing Spondylitis Disease Activity, Metrology and Functional Indices, and the modified Stoke Ankylosing Spondylitis Spinal Score. Methods: The study was conducted on 358 AS cases and 285 ethnically matched Portuguese healthy controls. AS was defined according to the modified New York Criteria. Genotyping of IL23R and ERAP1 allelic variants was carried out with TaqMan allelic discrimination assays. Association analysis was performed using the Cochrane-Armitage and linear regression tests of genotypes as implemented in PLINK for dichotomous and quantitative variables respectively. A meta-analysis for Portuguese and previously published Spanish IL23R data was performed using the StatsDirect® Statistical tools, by fixed and random effects models. Results: A total of 14 nsSNPs markers (8 for IL23R, 5 for ERAPl, 1 for LN-PEP) were analysed. Three markers (2 for IL23R and 1 for ERAP1) showed significant single-locus disease associations, confirming that the association of these genes with AS in the Portuguese population. The strongest associated SNP in IL23R was rs1004819 (OR=1.4, p=0.0049), and in ERAP1 was rs30187 (OR=1.26, p=0.035). The population attributable risk fractions in the Portuguese population for these SNPs are 11% and 9.7% respectively. No association was seen with any SNP in LN-PEP, which flanks ERAP1 and was associated with AS in the British population. No association was seen with clinical manifestations of AS. Conclusions: These results show that IL23R and ERAP1 genes are also associated with susceptibility to AS in the Portuguese population, and that they contribute a significant proportion of the population risk for this disease.

Angular dependence of the response of the nanoDot OSLD system for measurements at depth in clinical megavoltage beams

Purpose The purpose of this investigation was to assess the angular dependence of a commercial optically stimulated luminescence dosimeter (OSLD) dosimetry system in MV x-ray beams at depths beyondd max and to find ways to mitigate this dependence for measurements in phantoms. Methods Two special holders were designed which allow a dosimeter to be rotated around the center of its sensitive volume. The dosimeter's sensitive volume is a disk, 5 mm in diameter and 0.2 mm thick. The first holder rotates the disk in the traditional way. It positions the disk perpendicular to the beam (gantry pointing to the floor) in the initial position (0°). When the holder is rotated the angle of the disk towards the beam increases until the disk is parallel with the beam (“edge on,” 90°). This is referred to as Setup 1. The second holder offers a new, alternative measurement position. It positions the disk parallel to the beam for all angles while rotating around its center (Setup 2). Measurements with five to ten dosimeters per point were carried out for 6 MV at 3 and 10 cm depth. Monte Carlo simulations using GEANT4 were performed to simulate the response of the active detector material for several angles. Detector and housing were simulated in detail based on microCT data and communications with the manufacturer. Various material compositions and an all-water geometry were considered. Results For the traditional Setup 1 the response of the OSLD dropped on average by 1.4% ± 0.7% (measurement) and 2.1% ± 0.3% (Monte Carlo simulation) for the 90° orientation compared to 0°. Monte Carlo simulations also showed a strong dependence of the effect on the composition of the sensitive layer. Assuming the layer to completely consist of the active material (Al2O3) results in a 7% drop in response for 90° compared to 0°. Assuming the layer to be completely water, results in a flat response within the simulation uncertainty of about 1%. For the new Setup 2, measurements and Monte Carlo simulations found the angular dependence of the dosimeter to be below 1% and within the measurement uncertainty. Conclusions The dosimeter system exhibits a small angular dependence of approximately 2% which needs to be considered for measurements involving other than normal incident beams angles. This applies in particular to clinicalin vivo measurements where the orientation of the dosimeter is dictated by clinical circumstances and cannot be optimized as otherwise suggested here. When measuring in a phantom, the proposed new setup should be considered. It changes the orientation of the dosimeter so that a coplanar beam arrangement always hits the disk shaped detector material from the thin side and thereby reduces the angular dependence of the response to within the measurement uncertainty of about 1%. This improvement makes the dosimeter more attractive for clinical measurements with multiple coplanar beams in phantoms, as the overall measurement uncertainty is reduced. Similarly, phantom based postal audits can transition from the traditional TLD to the more accurate and convenient OSLD.

Identifying the financial barriers to deliberative, affordable apartment development in Australia

Purpose The purpose of this paper is to identify the financial barriers to the supply of affordable apartments in Australia and examine whether demand aggregation and ‘deliberative development’ (self-build) can form a new affordable housing ‘structure of provision’. Design/methodology/approach Market design, an offshoot of game theory, is used to analyse the existing apartment development model, with ‘deliberative development’ proposed as an innovative alternative. Semi-structured interviews with residential development financiers are used to evaluate whether deliberative development could obtain the requisite development finance. Findings Our investigation into the financial barriers of a deliberative development model suggest that while there are hurdles, these can be addressed if key risks in the exchange process can be mitigated. Hence, affordability can be enhanced by ‘deliberative development’ replacing the existing speculative development model. Research implications Market design is a new innovative theoretical approach to understanding the supply of housing, offering practical solutions to affordable apartment supply in Australia. Originality/value This research identifies financial barriers to the supply of affordable apartments; introduces theoretical understandings gained from market design as an innovative solution; provides evidence that a new structure of building provision based on ‘deliberative development’ could become a key means of achieving more affordable and better designed apartments.

Submission to the Senate Economics References Committee Inquiry into affordable housing 20 August 2014: De-risking development of medium density housing to improve housing affordability and boost supply

This submission addresses the problem of housing price inflation, the chronic under-supply of new housing stock, and the resultant decline in housing affordability for low and middle income households. It specifically focusses on the supply of medium density housing (multi-unit development) in Melbourne, although we believe that the observations made about housing in supply in Melbourne are relevant in other urban centres and to other types of housing supply. In terms of medium density housing (MDH) our concern also extends to the poor quality and design. Why the market tends to deliver generic apartments of poor quality and design which are uncompetitive with lower density housing and amenity despite planning objectives, and how this apparently intractable problem can be overcome is the topic of this submission...

Making apartments affordable: Moving from speculative to deliberative development

Urban planning policies in Australia presuppose apartments as the new dominant housing type, but much of what the market has delivered is criticised as over-development, and as being generic, poorly-designed, environmentally unsustainable and unaffordable. Policy responses to this problem typically focus on planning regulation and construction costs as the primary issues needing to be addressed in order to increase the supply of quality, affordable apartment housing. In contrast, this paper uses Ball’s (1983) ‘structures of provision’ approach to outline the key processes informing apartment development and identifies a substantial gap in critical understanding of how apartments are developed in Australia. This reveals economic problems not typically considered by policymakers. Using mainstream economic analysis to review the market itself, the authors found high search costs, demand risk, problems with exchange, and lack of competition present key barriers to achieving greater affordability and limit the extent to which ‘speculative’ developers can respond to the preferences of would be owner-occupiers of apartments. The existing development model, which is reliant on capturing uplift in site value, suits investors seeking rental yields in the first instance and capital gains in the second instance, and actively encourages housing price inflation. This is exacerbated by lack of density restrictions, such as have existed in inner Melbourne for many years, which permits greater yields on redevelopment sites. The price of land in the vicinity of such redevelopment sites is pushed up as landholders' expectation of future yield is raised. All too frequently existing redevelopment sites go back onto the market as vendors seek to capture the uplift in site value and exit the project in a risk free manner...

Smarten up! Applying market design theory to housing supply

PROBLEM Cost of delivering medium density apartments impedes supply of new and more affordable housing in established suburbs EXISTING FOCUS - Planning controls - Construction costs, esp labour - Regulation eg sustainability

Australian innovation ecosystem: A critical review of the national innovation support mechanisms

Innovation is understood as the combination of existing ideas or the generation of new ideas into new processes, products and services, and widely viewed as the main driver of growth in contemporary economies. In the age of the knowledge economy, successful economic development is intimately linked to a country’s capacity to generate, acquire, absorb, disseminate, and apply innovation towards advanced technology products and services. This development approach is labelled as knowledge-based economic development and highly associated with a capacity embodied in a country’s national innovation ecosystem. The research reported in this paper aims to critically review the Australian innovation ecosystem in order to provide a better understanding on the potential impacts of policy and support mechanisms on the innovation and knowledge generation capacity. The investigation places Australia’s innovation system and national-level innovation support mechanisms under the microscope. The methodology of the study is twofold. Firstly, it undertakes a critical review of the literature and government policy documents to better understand the innovation policy and support mechanisms in the country. It, then, conducts a survey to capture Australian innovation companies’ perceptions on the role and effectiveness of the existing innovation incentive programs. The paper concludes with a discussion on the key insights and findings and potential policy and support directions of the country to achieve a flourishing knowledge economy.