Transformerless PV inverters - recent test results and a discussion of DC current injection and safety issues

With the variety of PV inverter types and the number of transformerless PV inverters on the Australian market increasing, we revisit some of the issues associated with these topologies. A recent electric shock incident in Queensland (luckily without serious outcome) associated with a transformerless PV system, highlights the need for earthing PV array structures and PV module frames to prevent capacitive leakage currents causing electric shock. The presented test results of the relevant voltages associated with leakage currents of five transformerless PV inverters stress this requirement, which is currently being addressed by both the Clean Energy Council and Standards Australia. DC current injection tests were performed on the same five inverters and were used to develop preliminary recommendations for a more meaningful DC current test procedure for AS4777 Part 2. The test circuit, methodology and results are presented and discussed. A notable temperature dependency of DC current injections with three of the five inverters suggests that DC current injection should be tested at high and low internal inverter temperatures whereas the power dependency noted only for one inverter does not seem to justify recommendations for a (rather involved) standard test procedure at different power levels.

Injection velocity control of thermoplastic injection molding via a double controller scheme

Injection velocity has been recognized as a key variable in thermoplastic injection molding. Its closed-loop control is, however, difficult due to the complexity of the process dynamic characteristics. The basic requirements of the control system include tracking of a pre-determined injection velocity curve defined in a profile, load rejection and robustness. It is difficult for a conventional control scheme to meet all these requirements. Injection velocity dynamics are first analyzed in this paper. Then a novel double-controller scheme is adopted for the injection velocity control. This scheme allows an independent design of set-point tracking and load rejection and has good system robustness. The implementation of the double-controller scheme for injection velocity control is discussed. Special techniques such as profile transformation and shifting are also introduced to improve the velocity responses. The proposed velocity control has been experimentally demonstrated to be effective for a wide range of processing conditions.

Acoustic emission activity from the two main types of small multi-cylinder diesel engine fuel injection systems

Effective fuel injector operation and efficient combustion are two of the most critical aspects when Diesel engine performance, efficiency and reliability are considered. Indeed, it is widely acknowledged that fuel injection equipment faults lead to increased fuel consumption, reduced power, greater levels of exhaust emissions and even unexpected engine failure. Previous investigations have identified fuel injector related acoustic emission activity as being caused by mechanisms such as fuel line pressure build-up; fuel flow through injector nozzles, injector needle opening and closing impacts and premixed combustion related pulses. Few of these investigations however, have attempted to categorise the close association and interrelation that exists between fuel injection equipment function and the acoustic emission generating mechanisms. Consequently, a significant amount of ambiguity remains in the interpretation and categorisation of injector related AE activity with respect to the functional characteristics of specific fuel injection equipment. The investigation presented addresses this ambiguity by detailing a study in which AE signals were recorded and analysed from two different Diesel engines employing the two commonly encountered yet fundamentally different types of fuel injection equipment. Results from tests in which faults were induced into fuel injector nozzles from both indirect-injection and direct-injection engines show that functional differences between the main types of fuel injection equipment results in acoustic emission activity which can be specifically related to the type of fuel injection equipment used.

Combustion enhancement in a scramjet engine using oxygen enrichment and porous fuel injection

This paper reports on the experimental testing of oxygen-enriched porous fuel injection in a scramjet engine. Fuel was injected via inlet mounted, oxide-based ceramic matrix composite (CMC) injectors on both flow path surfaces that covered a total of 9.2 % of the intake surface area. All experiments were performed at an enthalpy of 3.93−4.25±3.2% MJ kg−1, flight Mach number 9.2–9.6 and an equivalence ratio of 0.493±3%. At this condition, the engine was shown to be on the verge of achieving appreciable combustion. Oxygen was then added to the fuel prior to injection such that two distinct enrichment levels were achieved. Combustion was found to increase, by as much as 40 % in terms of combustion-induced pressure rise, over the fuel-only case with increasing oxygen enrichment. Further, the onset of combustion was found to move upstream with increasing levels of oxygen enrichment. Thrust, both uninstalled and specific, and specific impulse were found to be improved with oxygen enrichment. Enhanced fuel–air mixing due to the pre-mixing of oxygen with the fuel together with the porous fuel injection are believed to be the main contributors to the observed enhanced performance of the tested engine.

Property rights in and entitlement to possession of sperm following death

In May 2011, the Supreme Court of New South Wales in Jocelyn Edwards; re the estate of the late Mark Edwards [2011] NSWSC 478 granted an application by a wife, in her capacity as administrator of her late husband's estate, to possession of sperm extracted from the body of her late husband.

Selection criteria in the search for a sperm donor: Behavioural traits versus physical appearance

Despite extensive literature on female mate choice, empirical evidence on women’s mating preferences in the search for a sperm donor is scarce, even though this search, by isolating a male’s genetic impact on offspring from other factors like paternal investment, offers a naturally ”controlled” research setting. In this paper, we work to fill this void by examining the rapidly growing online sperm donor market, which is raising new challenges by offering women novel ways to seek out donor sperm. We not only identify individual factors that influence women’s mating preferences but find strong support for the proposition that behavioural traits (inner values) are more important in these choices than physical appearance (exterior values). We also report evidence that physical factors matter more than resources or other external cues of material success, perhaps because the relevance of good character in donor selection is part of a female psychological adaptation throughout evolutionary history. The lack of evidence on a preference for material resources, on the other hand, may indicate the ability of peer socialization and better access to resources to rapidly shape the female decision process. Overall, the paper makes useful contributions to both the literature on human behaviour and that on decision-making in extreme and highly important situations.

Human mating in the informal market for sperm donation: Preferences and decision making

Choosing a mate is one of the largest (economic) decisions humans make. This thesis investigates this large scale decision and how the process is changing with the advent of the internet and the growing market for online informal sperm donation. This research identifies individual factors that influence female mating preferences. It explores the roles of behavioural traits and physical appearance, preferences for homogamy and hypergamy, and personality, and how these impact the decision to choose a donor. Overall, this thesis makes contributions to both the literature on human behaviour, and that on decision-making in extreme and highly important situations.

Flow field and traverse times for fan forced injection of fumigant via circular or annular inlet into stored grain

Fan forced injection of phosphine gas fumigant into stored grain is a common method to treat infestation by insects. For low injection velocities the transport of fumigant can be modelled as Darcy flow in a porous medium where the gas pressure satisfies Laplace's equation. Using this approach, a closed form series solution is derived for the pressure, velocity and streamlines in a cylindrically stored grain bed with either a circular or annular inlet, from which traverse times are numerically computed. A leading order closed form expression for the traverse time is also obtained and found to be reasonable for inlet configurations close to the central axis of the grain storage. Results are interpreted for the case of a representative 6m high farm wheat store, where the time to advect the phosphine to almost the entire grain bed is found to be approximately one hour.

Determinants of online sperm donor success: How women choose

Because the worldwide demand for sperm donors is much higher than the actual supply available through fertility clinics, an informal online market has emerged for sperm donation. Very little empirical evidence exists, however, on this newly formed market and even less on the characteristics that lead to donor success. This article therefore explores the determinants of online sperm donors’ selection success, which leads to the production of offspring via informal donation. We find that donor age and income play a significant role in donor success as measured by the number of times selected, even though there is no requirement for ongoing paternal investment. Donors with less extroverted and lively personality traits who are more intellectual, shy and systematic are more successful in realizing offspring via informal donation. These results contribute to both the economic literature on human behaviour and on large-scale decision-making.