The effect of high voltage, high frequency pulsed electric field on slain ovine cortical bone

High power, high frequency pulsed electric fields known as pulsed power (PP) has been applied recently in biology and medicine. However, little attention has been paid to investigate the application of pulse power in musculoskeletal system and its possible effect on functional behavior and biomechanical properties of bone tissue. This paper presents the first research investigating whether or not PP can be applied safely on bone tissue as a stimuli and what will be the possible effect of these signals on the characteristics of cortical bone by comparing the mechanical properties of this type of bone pre and post expose to PP and in comparison with the control samples. A positive buck‑boost converter was applied to generate adjustable high voltage, high frequency pulses (up to 500 V and 10 kHz). The functional behavior of bone in response to pulse power excitation was elucidated by applying compressive loading until failure. The stiffness, failure stress (strength) and the total fracture energy (bone toughness) were determined as a measure of the main bone characteristics. Furthermore, an ultrasonic technique was applied to determine and comprise bone elasticity before and after pulse power stimulation. The elastic property of cortical bone samples appeared to remain unchanged following exposure to pulse power excitation for all three orthogonal directions obtained from ultrasonic technique and similarly from the compression test. Nevertheless, the compressive strength and toughness of bone samples were increased when they were exposed to 66 h of high power pulsed electromagnetic field compared to the control samples. As the toughness and the strength of the cortical bone tissue are directly associated with the quality and integrity of the collagen matrix whereas its stiffness is primarily related to bone mineral content these overall results may address that although, the pulse power stimulation can influence the arrangement or the quality of the collagen network causing the bone strength and toughness augmentation, it apparently did not affect the mineral phase of the cortical bone material. The results also confirmed that the indirect application of high power pulsed electric field at 500 V and 10 kHz through capacitive coupling method was safe and did not destroy the bone tissue construction.

High-rate, low-temperature synthesis of composition controlled hydrogenated amorphous silicon carbide films in low-frequency inductively coupled plasmas

It is commonly believed that in order to synthesize high-quality hydrogenated amorphous silicon carbide (a-Si1-xCx : H) films at competitive deposition rates it is necessary to operate plasma discharges at high power regimes and with heavy hydrogen dilution. Here we report on the fabrication of hydrogenated amorphous silicon carbide films with different carbon contents x (ranging from 0.09 to 0.71) at high deposition rates using inductively coupled plasma (ICP) chemical vapour deposition with no hydrogen dilution and at relatively low power densities (∼0.025 W cm -3) as compared with existing reports. The film growth rate R d peaks at x = 0.09 and x = 0.71, and equals 18 nm min-1 and 17 nm min-1, respectively, which is higher than other existing reports on the fabrication of a-Si1-xCx : H films. The extra carbon atoms for carbon-rich a-Si1-xCx : H samples are incorporated via diamond-like sp3 C-C bonding as deduced by Fourier transform infrared absorption and Raman spectroscopy analyses. The specimens feature a large optical band gap, with the maximum of 3.74 eV obtained at x = 0.71. All the a-Si1-xCx : H samples exhibit low-temperature (77 K) photoluminescence (PL), whereas only the carbon-rich a-Si1-xCx : H samples (x ≥ 0.55) exhibit room-temperature (300 K) PL. Such behaviour is explained by the static disorder model. High film quality in our work can be attributed to the high efficiency of the custom-designed ICP reactor to create reactive radical species required for the film growth. This technique can be used for a broader range of material systems where precise compositional control is required. © 2008 IOP Publishing Ltd.

Two-surface wave decay : controlling power transfer in plasma-surface interactions

Controlled interaction of high-power pulsed electromagnetic radiation with plasma-exposed solid surfaces is a major challenge in applications spanning from electron beam accelerators in microwave electronics to pulsed laser ablation-assisted synthesis of nanomaterials. It is shown that the efficiency of such interaction can be potentially improved via an additional channel of wave power dissipation due to nonlinear excitation of two counterpropagating surface waves, resonant excitations of the plasma-solid system.Physics.

Low-frequency, high-density, inductively coupled plasma sources : operation and applications

Operation regimes, plasma parameters, and applications of the low-frequency (∼500 kHz) inductively coupled plasma (ICP) sources with a planar external coil are investigated. It is shown that highly uniform, high-density (ne∼9×1012 cm-3) plasmas can be produced in low-pressure argon discharges with moderate rf powers. The low-frequency ICP sources operate in either electrostatic (E) or electromagnetic (H) regimes in a wide pressure range without any Faraday shield or an external multipolar magnetic confinement, and exhibit high power transfer efficiency, and low circuit loss. In the H mode, the ICP features high level of uniformity over large processing areas and volumes, low electron temperatures, and plasma potentials. The low-density, highly uniform over the cross-section, plasmas with high electron temperatures and plasma and sheath potentials are characteristic to the electrostatic regime. Both operation regimes offer great potential for various plasma processing applications. As examples, the efficiency of the low-frequency ICP for steel nitriding and plasma-enhanced chemical vapor deposition of hydrogenated diamond-like carbon (DLC) films, is demonstrated. It appears possible to achieve very high nitriding rates and dramatically increase micro-hardness and wear resistance of the AISI 304 stainless steel. It is also shown that the deposition rates and mechanical properties of the DLC films can be efficiently controlled by selecting the discharge operating regime.

Power quality improvements in low voltage distribution networks containing distributed energy resources

In this thesis various schemes using custom power devices for power quality improvement in low voltage distribution network are studied. Customer operated distributed generators makes a typical network non-radial and affect the power quality. A scheme considering different algorithm of DSTATCOM is proposed for power circulation and islanded operation of the system. To compensate reactive power overflow and facilitate unity power factor, a UPQC is introduced. Stochastic analysis is carried out for different scenarios to get a comprehensive idea about a real life distribution network. Combined operation of static compensator and voltage regulator is tested for the optimum quality and stability of the system.

A LIN inspired optical bus for signal isolation in multilevel or modular power electronic converters

Proposed in this paper is a low-cost, half-duplex optical communication bus for control signal isolation in modular or multilevel power electronic converters. The concept is inspired by the Local Interconnect Network (LIN) serial network protocol as used in the automotive industry. The proposed communications bus utilises readily available optical transceivers and is suitable for use with low-cost microcontrollers for distributed control of multilevel converters. As a signal isolation concept, the proposed optical bus enables very high cell count modular multilevel cascaded converters (MMCCs) for high-bandwidth, high-voltage and high-power applications. Prototype hardware is developed and the optical bus concept is validated experimentally in a 33-level MMCC converter operating at 120 Vrms and 60 Hz.

Analysis and Improvements to the Green Falcon Solar Powered UAV

There has recently been a rapidly increasing interest in solar powered UAVs. With the emergence of high power density batteries, long range and low-power micro radio devices, airframes, and powerful micro-processors and motors, small/micro UAVs have become applicable in civilian applications such as remote sensing, mapping, traffic monitoring, search and rescue. The Green Falcon UAV is an innovative project from Queensland University of Technology and has been developed and tested during these past years. It comprises a wide range of subsystems to be analyses and studied such as Solar Panel Cells, Gas sensor, Aerodynamics of the wing and others. Previous test however, resulted in damage to the solar cells and some of the subsystems including motor and ESC. This report describes the repair and verification process followed to improve the efficiency of the Green Falcon UAV. The report shows some of the results obtained in previous static and flight tests as well as some of recommendations.

Self-commutated current source converter with multi-level current reinjection

The multi-level current reinjection concept described in literature is well-known to produce high quality AC current waveforms in high power and high voltage self-commutating current source converters. This paper proposes a novel reinjection circuitry which is capable of producing a 7-level reinjection current. It is shown that this reinjection current effectively increases the pulse number of the converter to 72. The use of PSCAD/EMTDC simulation validates the functionality of the proposed concept illustrating its effectiveness on both AC and DC sides of the converter.

Cross voltage control with inner hysteresis current control for multi-output boost converter

Multi-output boost (MOB) converter is a novel DC-DC converter unlike the regular boost converter, has the ability to share its total output voltage and to have different series output voltage from a given duty cycle for low and high power applications. In this paper, discrete voltage control with inner hysteresis current control loop has been proposed to keep the simplicity of the control law for the double-output MOB converter, which can be implemented by a combination of analogue and logical ICs or simple microcontroller to constrain the output voltages of MOB converter at their reference voltages against variation in load or input voltage. The salient features of the proposed control strategy are simplicity of implementation and ease to extend to multiple outputs in the MOB converter. Simulation and experimental results are presented to show the validity of control strategy.

Multi-output DC-DC converters based on diode-clamped converters configuration : topology and control strategy

This paper presents a new DC-DC Multi-Output Boost (MOB) converter which can share its total output between different series of output voltages for low and high power applications. This configuration can be utilised instead of several single output power supplies. This is a compatible topology for a diode-clamed inverter in the grid connection systems, where boosting low rectified output-voltage and series DC link capacitors is required. To verify the proposed topology, steady state and dynamic analysis of a MOB converter are examined. A simple control strategy has been proposed to demonstrate the performance of the proposed topology for a double-output boost converter. The topology and its control strategy can easily be extended to offer multiple outputs. Simulation and experimental results are presented to show the validity of the control strategy for the proposed converter.

Fast and robust stereo object recognition for spheres

The paper presents a fast and robust stereo object recognition method. The method is currently unable to identify the rotation of objects. This makes it very good at locating spheres which are rotationally independent. Approximate methods for located non-spherical objects have been developed. Fundamental to the method is that the correspondence problem is solved using information about the dimensions of the object being located. This is in contrast to previous stereo object recognition systems where the scene is first reconstructed by point matching techniques. The method is suitable for real-time application on low-power devices.

Reverse immigration

This book (256 pages, written in Korean) is a critical essay that reviews, questions, and criticises Korean and Eastern immigrants’ thinking and behaviour styles in Australia from their cultural perspectives, and discuss and proposes a creative cultural dimension for their better life in a multicultural context. Multiculturalism is not supportive of Eastern cultures because of individualistic collection of cultures, while transculturalism facilitates nurture of their culture in a community-oriented way within multicultural circumstances. Korean and Eastern immigrants, sharing oriental cultural systems and values, should approach to the Australian multicultural context with transculturalism which allows creating new cultural values in collaboration with and by participation into local communities. ------------------------------------------------------------ Many Eastern immigrants live in their own ethnic communities without or less interacting with Australian (communities). The author defines this phenomenon as “reverse immigration”. Reverse immigration refers to re-immigrating to their ethnic community in Australia or to their birth country despite they did not anticipate that this would happen to them before immigration to Australia. The author argues that Easterners’ collectivistic culture often devalues individuality and vice versa. Cultural clash between West and East often forces the immigrants to choose reverse immigration because of their lack of understanding of Western culture and their cultural characteristics such as low individuality, high power distance, and high uncertainty avoidance. For example, a vague boundary between individualist and collectivist in a collectivistic context (within their ethnic group) often leads to maladjustment to local communities and enhancement of cultural conservatism. The author proposes that the cultural clash can be overcome by cross-cultural activities named “transculturalism”. To Eastern immigrants, transculturalism can be achieved by acculturation of their two predominant cultures, the third-person perspective and generalised others. In a multicultural context, the former refers to the ability to share another person's feelings and emotions as if they were your own, and the latter does the ability to manage community and public expectations. When both cultural values are used for quality interactions between East and West, they allow Eastern immigrants to be more creative and critical and Australian to be more socially inclusive and culturally tolerant. With these discussions, the author discusses cultural differences throughout the book with four topics (chapters) and proposes transculturalism as a solution to the reverse immigration. ------------------------------------------------------------ Chapter 1 criticises Koreans’ attitudes and methods towards learning English that is less pragmatic and practical, but more likely to be a scholarly study. The author explains that Koreans’ non-pragmatic towards learning English has been firmly built based on their traditional systems and values that Koreans view English as a discipline and an aim of academic achievements rather than a means of communication. Within their cultural context, English can be perceived as more than a language, but something like vastly superior to their language and culture. Their collectivistic culture regards English as an unreachable and heterogeneous one that may threaten their cultural identity, so that “scholarly studying” is only the way to achieve (not learn) it. This discourages the immigrants to engage and involve in daily dialogues by “using” English as a second language. The author further advises the readers to be aware of Eastern collectivistic culture in communication and interaction that sometimes completely reverses private and public topics in a Western context. This leads them to feel that they have no content to talk to natives. ------------------------------------------------------------ Chapter 2 compares between Korea and Australia in terms of their educational systems and values, and proposes how Eastern overseas students can achieve critical and creative thinking within a Western educational setting. Interestingly, this chapter includes an explanation of why Eastern overseas students easily fail assessments including essay writing, oral presentations and discussions. One of the reasons the author explains is that Eastern students are not familiar to criticise others and think creatively, especially when they recognise that their words and ideas may harm the collectivistic harmony. Western educational systems focuses on enhancement of individuality such as self-confidence, self-esteem, and self-expression, while Eastern educational systems foster group-oriented values such as interpersonal relationship, and strong moral and spiritual values. Yet, the author argues that the collectivistic approach to criticism and creativity is often more critical and creative than Western individuals when they know what they are supposed to do for a group (or a community). Therefore, Eastern students need to think their cultural merits and demerits by using an individual perspective rather than generalised others’ perspective. The latter often discourages individual participation in a community, and the generalised others in a Western culture is weaker than Eastern. Furthermore, Western educational systems do not educate students to transform (loose) their individuality to fit into a group or a community. Rather they cultivate individuality for community prosperity. ------------------------------------------------------------ Chapter 3 introduces various cases of reverse immigration in workplaces that many immigrants return to their country or their ethnic community after many trials for acculturation. Reverse immigration is unexpected and not planned before immigration, so that its emotional embarrassment increases such severe social loneliness. Most Eastern immigrant workers have tried to adjust themselves in this new cultural environment at the early stages of immigration. However, their cultural features of collectivism, high power distance, high uncertainty avoidance, and long-term oriented cultures suppress individual initiative and eliminate the space for experiments in ways of acculturation. The author argues that returning to their ethnic community (physically and psychologically) leads to two significant problems: their distorted parenting and becoming more conservatives. The former leads the first generation of immigrants to pressure their children to pursue extrinsic or materialist values, such as financial success, fame and physical appearance, rather than on intrinsic values, while the latter refers to their isolated conservative characters because of their remoteness from the changes of their own country. The author also warns that their ethnic and religious groups actively strengthens immigrants’ social loneliness and systematically discourages immigrants’ interests and desire to be involving into local communities. The ethnic communities and leaders have not been interacting with Australian local communities and, as a result, are eager to conserve outdated cultural systems values. Even they have a tendency to weed out those people who wish to settle down within Australian local communities. They believe that those people can threaten their community’s survival and continuity. ------------------------------------------------------------ Chapter 4 titled multiculturalism argues that Korean and Eastern immigrants should more precisely understand Australia as a multicultural society in a way of collaboratively creating new cultural values. The author introduces multiculturalism with its definitions and history in Australia and argues the limitations of multiculturalism from an Easterner’s perspective. With well known tragedies of the second generations of U.S. immigrants, Cho Seung-Hui, a university student, massacred 32 people on the Virginia Tech before committing suicide and Hidal Hassan, an Army psychiatrist, killed 13 people at Fort Hood and the responses of ethnic community, the author explains that their mental illness may be derived from their parents’ (or ethnic group) culturally isolated attitude and socially static viewpoint of U.S. (Western system and values). The author insists that multiculturalism may restrict Eastern immigrants’ engagement and involvement in local communities. Multiculturalism has been systematically and historically developed based on Western systems and cultural values. In other words, multiculturalism requires high self-confidence and self-esteem that Eastern immigrants less prioritise them. It has been generally known that Easterners put more weight on human relationship than Westerners, but the author claims that this is not true. Within an individualistic culture, Westerners are more interested in building person-to-person connections and relationships. While Easterners are more interested in how individuals can achieve a sense of belonging within a group and a community. Therefore, multiculturalism is an ideology which forces Eastern immigrants to discard their strong desire to be part of a group and does not give a sense of belonging. In a consequence, the author advises that Eastern immigrants should aim towards “transculturalism” which allows them to actively participate in and contribute to their multicultural community. Transculturalism does not ask Easterners to discard their cultural values, but enables them to be a collectivistic individualist (a community leader) who is capable of developing new cultural values in a more creative and productive way. Furthermore, transculturalism encourages Western Australians in a multicultural context to collaborate with ethnic minorities to build a better community.

A new unequal DC link voltage configuration for a single phase multilevel converter to reduce low order harmonics

Multilevel converters are used in high power and high voltage applications due to their attractive benefits in generating high quality output voltage. Increasing the number of voltage levels can lead to a reduction in lower order harmonics. Various modulation and control techniques are introduced for multilevel converters like Space Vector Modulation (SVM), Sinusoidal Pulse Width Modulation (SPWM) and Harmonic Elimination (HE) methods. Multilevel converters may have a DC link with equal or unequal DC voltages. In this paper a new modulation technique based on harmonic elimination method is proposed for those multilevel converters that have unequal DC link voltages. This new technique has better effect on output voltage quality and less Total Harmonic Distortion (THD) than other modulation techniques. In order to verify the proposed modulation technique, MATLAB simulations are carried out for a single-phase diode-clamped inverter.

Microscale study of electrical characteristics of epoxy-multiwall carbon nanotube nanocomposites

Epoxy-multiwall carbon nanotube nanocomposite thin films were prepared by spin casting. High power air plasma was used to preferentially etch a coating of epoxy and expose the underlying carbon nanotube network. Scanning electron microscopy (SEM) examination revealed well distributed and spatially connected carbon nanotube network in both the longitudinal direction (plasma etched surface) and traverse direction (through-thickness fractured surface). Topographical examination and conductive mode imaging of the plasma etched surface using atomic force microscope (AFM) in the contact mode enabled direct imaging of topography and current maps of the embedded carbon nanotube network. Bundles consisting of at least three single carbon nanotubes form part of the percolating network observed under high resolution current maps. Predominantly non-ohmic response is obtained in this study; behaviour attributed to less than effective polymer material removal when using air plasma etching.

A novel winding structure in planar inductors to decrease overall capacitive couplings

This paper analyses effects of winding structure on capacitive coupling reduction appearing in the planar magnetic elements at high frequencies. Capacitive coupling appears between the conductive layers of the planar transformers resulting in high current spikes and consequently high power dissipation. With finite element analysis, the equivalent capacitive coupling of magnetic elements is calculated for different structures of planar windings. Finally, a new winding structure with minimum capacitive coupling is introduced for the planar magnetic elements, which is verified by simulation and experiments.