Transit route occupancy load factor and passenger average travel time for quality of service assessment

This paper investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This presentation investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Assessment of transit quality of service with occupancy load factor and passenger travel time measures

This paper investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

How Jung's concept of the wounded healer can guide learning and teaching in social work and human services

The concept of the “wounded healer” has been used to explain why those with adverse childhood histories often enter helping professions such as social work and human services (SWHS). Psychotherapist Carl Jung (1875–1961) believed wounded healers developed insight and resilience from their own experiences, enabling transformative interventions to occur with clients. Concerns exist that students with adverse childhood histories in SWHS may display unresolved emotional issues. This journal article explores how Jung’s interpretation of the wounded healer can be critically applied to understanding the learning needs of SWHS students with histories of abuse, neglect or other childhood adversity. The relevance of the wounded healer to SWHS education is explored in three key areas: - 1) the increased possibility of the occurrence of countertransference; - 2) the potential for vicarious traumatisation and burnout, and; - 3) personal and professional resilience displayed by SWHS students with a history of childhood adversity. The wounded healer metaphor allows for a more nuanced understanding of SWHS students with these histories. It also provides insight into the pedagogical considerations associated with teaching this student cohort.

A distributed services based conference planner application using software agents, grid services and web services

This demonstration highlights the applications of our research work i.e. second generation (Scalable Fault Tolerant Agent Grooming Environment - SAGE) Multi Agent System, Integration of Software Agents and Grid Computing and Autonomous Agent Architecture in the Agent Platform. It is a conference planner application that uses collaborative effort of services deployed geographically wide in different technologies i.e. Software Agents, Grid computing and Web services to perform useful tasks as required. Copyright 2005 ACM.

A collaborative multi-agent based conference planner application using web and grid services

Distributed Collaborative Computing services have taken over centralized computing platforms allowing the development of distributed collaborative user applications. These applications enable people and computers to work together more productively. Multi-Agent System (MAS) has emerged as a distributed collaborative environment which allows a number of agents to cooperate and interact with each other in a complex environment. We want to place our agents in problems whose solutions require the collation and fusion of information, knowledge or data from distributed and autonomous information sources. In this paper we present the design and implementation of an agent based conference planner application that uses collaborative effort of agents which function continuously and autonomously in a particular environment. The application also enables the collaborative use of services deployed geographically wide in different technologies i.e. Software Agents, Grid computing and Web service. The premise of the application is that it allows autonomous agents interacting with web and grid services to plan a conference as a proxy to their owners (humans). © 2005 IEEE.

Field placement and the impact of financial stress on social work and human services students

While significant research has been undertaken exploring the pedagogical benefits of undertaking lengthy social work and human services field placements, there has been very little consideration regarding the potential financial stress involved for students. This study has addressed this knowledge gap. Research was conducted in 2014 using quantitative and qualitative methods with students, academic and professional staff from six Queensland Universities. The findings show a significant relationship between unpaid placements and financial hardship creating considerable stress for students and at times a compromised learning experience whilst on placement. The limited flexibility in the requirements of professional bodies and universities for how placements are undertaken has been identified as a key contributor to financial hardship. Addressing the complexities inherent in this issue requires a collaborative effort from multiple stakeholders and should not be regarded as a problem for students to endure and manage.

A submission to the Tasmanian Department of Health and Human Services consultation “Healthy Tasmania Five Year Strategic Plan”

This submission will address a number of questions raised in section 5.2, “Potential Future Initiatives to target smoking”, of the Healthy Tasmania Five Year Strategic Plan – Community Consultation Draft. Each question has been answered within this submission. This submission will also address the possibility of legal challenges to these proposed changes, a pivotal consideration when implementing any tobacco control laws. This is due to the aggressive nature of the tobacco industry, as illustrated by their attempts to challenge plain packaging laws in the country and through international treaties. The evidence provided in my submission illustrates that prevention of initiation of smoking during adolescence has various benefits in terms of reduction of negative smoking behaviors in later life. I argue that increasing the minimum legal age of purchasing for tobacco to 21 will benefit both the levels of underage smoking as well as the age of onset of initiation of smoking, due to the greater difficulties that those who are underage would experience in accessing tobacco products. I will also address the question of whether the minimum smoking age should be increased to 25.

Family mediation and women’s services: Towards effective referral

Central to Government’s strategy for separating families is the management and resolution of disputes away from courts and litigation processes wherever this is achievable. A key group of players in facilitating this vision are workers within the wide range of women’s services. This study surveyed workers at a number of Victorian women’s services that provide advice, support, and referral for women and explored their understanding of mediation processes and outcomes. The results indicate that, while generally supportive of mediation as a process that could assist their clients, workers were concerned about its appropriateness when family violence was an issue. Some of these concerns appeared to be based upon a good understanding of the limitations of mediation practices, but it is also apparent that some concerns were influenced by a misunderstanding and limited knowledge of contemporary mediation practice. It is recommended that family mediation services work proactively with women’s services in order to better inform each other of the possibilities and constraints in working with postseparation disputes.

Fiber Bragg Grating sensors for railway systems

Fiber Bragg grating (FBG) sensor technology has been attracting substantial industrial interests for the last decade. FBG sensors have seen increasing acceptance and widespread use for structural sensing and health monitoring applications in composites, civil engineering, aerospace, marine, oil & gas, and smart structures. One transportation system that has been benefitted tremendously from this technology is railways, where it is of the utmost importance to understand the structural and operating conditions of rails as well as that of freight and passenger service cars to ensure safe and reliable operation. Fiberoptic sensors, mostly in the form of FBGs, offer various important characteristics, such as EMI/RFI immunity, multiplexing capability, and very long-range interrogation (up to 230 km between FBGs and measurement unit), over the conventional electrical sensors for the distinctive operational conditions in railways. FBG sensors are unique from other types of fiber-optic sensors as the measured information is wavelength-encoded, which provides self-referencing and renders their signals less susceptible to intensity fluctuations. In addition, FBGs are reflective sensors that can be interrogated from either end, providing redundancy to FBG sensing networks. These two unique features are particularly important for the railway industry where safe and reliable operations are the major concerns. Furthermore, FBGs are very versatile and transducers based on FBGs can be designed to measure a wide range of parameters such as acceleration and inclination. Consequently, a single interrogator can deal with a large number of FBG sensors to measure a multitude of parameters at different locations that spans over a large area.

Transit line passenger transmission and productiveness under high load conditions

Deterministic transit capacity analysis applies to planning, design and operational management of urban transit systems. The Transit Capacity and Quality of Service Manual (1) and Vuchic (2, 3) enable transit performance to be quantified and assessed using transit capacity and productive capacity. This paper further defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures the transit task performed over distance. Passenger transmission (p-km/h) captures the passenger task delivered by service at speed. Transit productiveness (p-km/h) captures transit work performed over time. These measures are useful to operators in understanding their services��� or systems’ capabilities and passenger quality of service. This paper accounts for variability in utilized demand by passengers along a line and high passenger load conditions where passenger pass-up delay occurs. A hypothetical case study of an individual bus service’s operation demonstrates the usefulness of passenger transmission in comparing existing and growth scenarios. A hypothetical case study of a bus line’s operation during a peak hour window demonstrates the theory’s usefulness in examining the contribution of individual services to line productive performance. Scenarios may be assessed using this theory to benchmark or compare lines and segments, conditions, or consider improvements.

Passenger transmission and productiveness of transit lines with high loads

Deterministic transit capacity analysis applies to planning, design and operational management of urban transit systems. The Transit Capacity and Quality of Service Manual (1) and Vuchic (2, 3) enable transit performance to be quantified and assessed using transit capacity and productive capacity. This paper further defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures the transit task performed over distance. Passenger transmission (p-km/h) captures the passenger task delivered by service at speed. Transit productiveness (p-km/h) captures transit work performed over time. These measures are useful to operators in understanding their services��� or systems’ capabilities and passenger quality of service. This paper accounts for variability in utilized demand by passengers along a line and high passenger load conditions where passenger pass-up delay occurs. A hypothetical case study of an individual bus service’s operation demonstrates the usefulness of passenger transmission in comparing existing and growth scenarios. A hypothetical case study of a bus line’s operation during a peak hour window demonstrates the theory’s usefulness in examining the contribution of individual services to line productive performance. Scenarios may be assessed using this theory to benchmark or compare lines and segments, conditions, or consider improvements.

High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services��� and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services��� and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

High-load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services��� and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.