Rayleigh theory of ultrasound scattering applied to liquid-filled contrast nanoparticles

We present a novel modified theory based upon Rayleigh scattering of ultrasound from composite nanoparticles with a liquid core and solid shell. We derive closed form solutions to the scattering cross-section and have applied this model to an ultrasound contrast agent consisting of a liquid-filled core (perfluorooctyl bromide, PFOB) encapsulated by a polymer shell (poly-caprolactone, PCL). Sensitivity analysis was performed to predict the dependence of the scattering cross-section upon material and dimensional parameters. A rapid increase in the scattering cross-section was achieved by increasing the compressibility of the core, validating the incorporation of high compressibility PFOB; the compressibility of the shell had little impact on the overall scattering cross-section although a more compressible shell is desirable. Changes in the density of the shell and the core result in predicted local minima in the scattering cross-section, approximately corresponding to the PFOB-PCL contrast agent considered; hence, incorporation of a lower shell density could potentially significantly improve the scattering cross-section. A 50% reduction in shell thickness relative to external radius increased the predicted scattering cross-section by 50%. Although it has often been considered that the shell has a negative effect on the echogeneity due to its low compressibility, we have shown that it can potentially play an important role in the echogeneity of the contrast agent. The challenge for the future is to identify suitable shell and core materials that meet the predicted characteristics in order to achieve optimal echogenity.

Predicting the consumption of foods low in saturated fats among people diagnosed with Type 2 diabetes and cardiovascular disease. The role of planning in the theory of planned behaviour

The present study tested the utility of an extended version of the theory of planned behaviour that included a measure of planning, in the prediction of eating foods low in saturated fats among adults diagnosed with Type 2 diabetes and/or cardiovascular disease. Participants (N = 184) completed questionnaires assessing standard theory of planned behaviour measures (attitude, subjective norm, and perceived behavioural control) and the additional volitional variable of planning in relation to eating foods low in saturated fats. Self-report consumption of foods low insaturated fats was assessed 1 month later. In partial support of the theory of planned behaviour, results indicated that attitude and subjective norm predicted intentions to eat foods low in saturated fats and intentions and perceived behavioural control predicted the consumption of foods low in saturated fats. As an additional variable, planning predicted the consumption of foods low in saturated fats directly and also mediated the intention–behaviour and perceived behavioural control–behaviour relationships, suggesting an important role for planning as a post-intentional construct determining healthy eating choices. Suggestions are offered for interventions designed to improve adherence to healthy eating recommendations for people diagnosed with these chronic conditions with a specific emphasis on the steps and activities that are required to promote a healthier lifestyle.

Towards a relational theory of copyright law

This research provides a systematic and theoretical analysis of the digital challenges to the established exclusive regime of the economic rights enjoyed by authors (and related rightholders) under the law of copyright. Accordingly, this research has developed a relational theory of authorship and a relational approach to copyright, contending that the regulatory emphasis of copyright law should focus on the facilitation of the dynamic relations between the culture, the creators, the future creators, the users and the public, rather than the allocation of resources in a static world. In this networked digital world, the creative works and contents have become increasingly vital for people to engage in creativity and cultural innovation, and for the evolution of the economy. Hence, it is argued that today copyright owners, as content holders, have certain obligations to make their works accessible and available to the public under fair conditions. This research sets forward a number of recommendations for the reform of the current copyright system.

Understanding speeding in school zones in Malaysia and Australia using an extended Theory of Planned Behaviour : the potential role of mindfulness

Speeding in school zones is a problem in both Malaysia and Australia. While there are differences between the countries in terms of school zone treatments and more generally, these differences do not explain why people choose to speed in school zones. Because speeding is usually an intentional behaviour, the Theory of Planned Behaviour (TPB) has been used to understand speeding and develop interventions, however it has limitations which can be addressed by extending the model to incorporate other constructs. One promising construct is mindfulness, which can improve the explanatory value of the TPB by taking into account unintentional speeding attributable to a lack of focus on important elements of the driving environment. We explain what mindfulness is (and is not), how it can assist in providing a better understanding of speeding in school zones, and how it can contribute to the development of interventions. We then outline a program of research which has been commenced, investigating the contribution of mindfulness to an understanding of speed choice in school zones in two different settings (Australia and Malaysia) using the TPB.

A theory of waste behaviour in the construction industry

Levels of waste within the construction industry need to be reduced for environmental and economic reasons. Changing people's wasteful behaviour can make a significant contribution. This paper describes a research project that used Ajzen's 'theory of planned behaviour' to investigate the attitudinal forces that shape behaviour at the operative level. It concludes that operatives see waste as an inevitable by-product of construction activity. Attitudes towards waste management are not negative, although they are pragmatic and impeded by perceptions of a lack of managerial commitment. Waste management is perceived as a low project priority, and there is an absence of appropriate resources and incentives to support it. A theory of waste behaviour is proposed for the construction industry, and recommendations are made to help managers improve operatives' attitudes towards waste.

A preliminary theory of dark network resilience

A crucial contemporary policy question for governments across the globe is how to cope with international crime and terrorist networks. Many such “dark” networks—that is, networks that operate covertly and illegally—display a remarkable level of resilience when faced with shocks and attacks. Based on an in-depth study of three cases (MK, the armed wing of the African National Congress in South Africa during apartheid; FARC, the Marxist guerrilla movement in Colombia; and the Liberation Tigers of Tamil Eelam, LTTE, in Sri Lanka), we present a set of propositions to outline how shocks impact dark network characteristics (resources and legitimacy) and networked capabilities (replacing actors, linkages, balancing integration and differentiation) and how these in turn affect a dark network's resilience over time. We discuss the implications of our findings for policymakers.

A communitarian theory of the education rights of students with disabilities

There is a lack of writing on the issue of the education rights of people with disabilities by authors of any theoretical persuasion. While the deficiency of theory may be explained by a variety of historical, philosophical and practical considerations, it is a deficiency which must be addressed. Otherwise, any statement of rights rings out as hollow rhetoric unsupported by sound reason and moral rectitude. This paper attempts to address this deficiency in education rights theory by postulating a communitarian theory of the education rights of people with disabilities. The theory is developed from communitarian writings on the role of education in democratic society. The communitarian school, like the community within which it nests, is inclusive. Schools both reflect and model the shape of communitarian society and have primary responsibility for teaching the knowledge and virtues which will allow citizens to belong to and function within society. Communitarians emphasise responsibilities, however, as the corollary of rights and require the individual good to yield to community good when the hard cases arise. The article not only explains the basis of the right to an inclusive education, therefore, but also engages with the difficult issue of when such a right may not be enforceable.

A grounded theory of protest movement continuity

Using a thematic story telling approach which draws on ethnographic method, a grounded theory of protest movement continuity is presented. The grounded theory draws from theories and activist stories relating to the facilitative role of movement networks, social contagion theory and the cultural experience of activism. It highlights the contagious influence of protest networks in maintaining protest continuity over time and how this leads to common perceptions of development risk and opportunity within communities. It also reveals how communities use collective values and identity, social capital, emotional dynamics and symbolic artifacts to maintain protest continuity.

To bound or not to bound: preliminary Theory of Time Bounds Specification in strategic alliances

This article augments Resource Dependence Theory with Real Options reasoning in order to explain time bounds specification in strategic alliances. Whereas prior work has found about a 50/50 split between alliances that are time bound and those that are open-ended, their substantive differences and antecedents are ill understood. To address this, we suggest that the two alliance modes present different real options trade-offs in adaptation to environmental uncertainty: ceteris paribus, time-bound alliances are likely to provide abandonment options over open-ended alliances, but require additional investments to extend the alliance when this turns out to be desirable after formation. Open-ended alliances are likely to provide growth options over open-ended alliances, but they demand additional effort to abandon the alliance if post-formation circumstances so desire. Therefore, we expect time bounds specification to be a function of environmental uncertainty: organizations in more uncertain environments will be relatively more likely to place time bounds on their strategic alliances. Longitudinal archival and survey data collected amongst 39 industry clusters provides empirical support for our claims, which contribute to the recent renaissance of resource dependence theory by specifying the conditions under which organizations choose different time windows in strategic partnering.

Influence of physical and chemical properties of solids on heavy metal adsorption

Partition of heavy metals between particulate and dissolve fraction of stormwater primarily depends on the adsorption characteristics of solids particles. Moreover, the bioavailability of heavy metals is also influenced by the adsorption behaviour of solids. However, due to the lack of fundamental knowledge in relation to the heavy metals adsorption processes of road deposited solids, the effectiveness of stormwater management strategies can be limited. The research study focused on the investigation of the physical and chemical parameters of solids on urban road surfaces and, more specifically, on heavy metal adsorption to solids. Due to the complex nature of heavy metal interaction with solids, a substantial database was generated through a series of field investigations and laboratory experiments. The study sites for the build-up pollutant sample collection were selected from four urbanised suburbs located in a major river catchment. Sixteen road sites were selected from these suburbs and represented typical industrial, commercial and residential land uses. Build-up pollutants were collected using a wet and dry vacuum collection technique which was specially designed to improve fine particle collection. Roadside soil samples were also collected from each suburb for comparison with the road surface solids. The collected build-up solids samples were separated into four particle size ranges and tested for a range of physical and chemical parameters. The solids build-up on road surfaces contained a high fraction (70%) of particles smaller than 150ìm, which are favourable for heavy metal adsorption. These solids particles predominantly consist of soil derived minerals which included quartz, albite, microcline, muscovite and chlorite. Additionally, a high percentage of amorphous content was also identified in road deposited solids. In comparing the mineralogical data of surrounding soil and road deposited solids, it was found that about 30% of the solids consisted of particles generated from traffic related activities on road surfaces. Significant difference in mineralogical composition was noted in different particle sizes of build-up solids. Fine solids particles (<150ìm) consisted of a clayey matrix and high amorphous content (in the region of 40%) while coarse particles (>150ìm) consisted of a sandy matrix at all study sites, with about 60% quartz content. Due to these differences in mineralogical components, particles larger than and smaller than 150ìm had significant differences in their specific surface area (SSA) and effective cation exchange capacity (ECEC). These parameters, in turn, exert a significant influence on heavy metal adsorption. Consequently, heavy metal content in >150ìm particles was lower than in the case of fine particles. The particle size range <75ìm had the highest heavy metal content, corresponding with its high clay forming minerals, high organic matter and low quartz content which increased the SSA, ECEC and the presence of Fe, Al and Mn oxides. The clay forming minerals, high organic matter and Fe, Al and Mn oxides create distinct groups of charge sites on solids surfaces and exhibit different adsorption mechanisms and bond strength, between heavy metal elements and charge sites. Therefore, the predominance of these factors in different particle sizes leads to different heavy metal adsorption characteristics. Heavy metals show preference for association with clay forming minerals in fine solids particles, whilst in coarse particles heavy metals preferentially associate with organic matter. Although heavy metal adsorption to amorphous material is very low, the heavy metals embedded in traffic related materials have a potential impact on stormwater quality.Adsorption of heavy metals is not confined to an individual type of charge site in solids, whereas specific heavy metal elements show preference for adsorption to several different types of charge sites in solids. This is attributed to the dearth of preferred binding sites and the inability to reach the preferred binding sites due to competition between different heavy metal species. This confirms that heavy metal adsorption is significantly influenced by the physical and chemical parameters of solids that lead to a heterogeneity of surface charge sites. The research study highlighted the importance of removal of solids particles from stormwater runoff before they enter into receiving waters to reduce the potential risk posed by the bioavailability of heavy metals. The bioavailability of heavy metals not only results from the easily mobile fraction bound to the solids particles, but can also occur as a result of the dissolution of other forms of bonds by chemical changes in stormwater or microbial activity. Due to the diversity in the composition of the different particle sizes of solids and the characteristics and amount of charge sites on the particle surfaces, investigations using bulk solids are not adequate to gain an understanding of the heavy metal adsorption processes of solids particles. Therefore, the investigation of different particle size ranges is recommended for enhancing stormwater quality management practices.

Third-order theory of spectacle lenses applied to correction of peripheral refractive errors

Purpose: To demonstrate that relatively simple third-order theory can provide a framework which shows how peripheral refraction can be manipulated by altering the forms of spectacle lenses. Method: Third-order equations were used to yield lens forms that correct peripheral power errors, either for the lenses alone or in combination with typical peripheral refractions of myopic eyes. These results were compared with those of finite ray-tracing. Results: The approximate forms of spherical and conicoidal lenses provided by third-order theory were flatter over a moderate myopic range than the forms obtained by rigorous raytracing. Lenses designed to correct peripheral refractive errors produced large errors when used with foveal vision and a rotating eye. Correcting astigmatism tended to give large errors in mean oblique error and vice versa. When only spherical lens forms are used, correction of the relative hypermetropic peripheral refractions of myopic eyes which are observed experimentally, or the provision of relative myopic peripheral refractions in such eyes, seems impossible in the majority of cases. Conclusion: The third-order spectacle lens design approach can readily be used to show trends in peripheral refraction.

Role of solids in heavy metals build-up on urban road surfaces

Solids are widely identified as a carrier of harmful pollutants in stormwater runoff exerting a significant risk to receiving waters. This paper outlines the findings of an in-depth investigation on heavy metal adsorption to solids surfaces. Pollutant build-up samples collected from sixteen road sites in residential, industrial and commercial land uses were separated into four particle size ranges and analysed for a range of physico-chemical parameters and nine heavy metals including Iron (Fe), Aluminum (Al), Lead (Pb), Zinc (Zn), Cadmium (Cd), Chromium (Cr), Manganese (Mn), Nickel (Ni) and Copper (Cu). High specific surface area (SSA) and total organic carbon (TOC) content in finer particle size ranges was noted, thus confirming strong correlations with heavy metals. Based on their physico-chemical characteristics, two different types of solids originating from traffic and soil sources were identified. Solids generated by traffic were associated with high loads of heavy metals such as Cd and Cr with strong correlation with SSA. This suggested the existence of surface dependent bonds such as cation exchange between heavy metals and solids. In contrast, Fe, Al and Mn which can be attributed to soil inputs showed strong correlation with TOC suggesting strong bonds such as chemsorption. Zn was found to be primarily attached to solids by bonding with the oxides of Fe, Al and Mn. The data analysis also confirmed the predominance of the finer fraction, with 70% of the solids being finer than 150 µm and containing 60% of the heavy metal pollutant load.

Perceiving and pursuing novelty : a grounded theory of adolescent creativity

Creativity plays an increasingly important role in our personal, social, educational, and community lives. For adolescents, creativity can enable self-expression, be a means of pushing boundaries, and assist learning, achievement, and completion of everyday tasks. Moreover, adolescents who demonstrate creativity can potentially enhance their capacity to face unknown future challenges, address mounting social and ecological issues in our global society, and improve their career opportunities and contribution to the economy. For these reasons, creativity is an essential capacity for young people in their present and future, and is highlighted as a priority in current educational policy nationally and internationally. Despite growing recognition of creativity’s importance and attention to creativity in research, the creative experience from the perspectives of the creators themselves and the creativity of adolescents are neglected fields of study. Hence, this research investigated adolescents’ self-reported experiences of creativity to improve understandings of their creative processes and manifestations, and how these can be supported or inhibited. Although some aspects of creativity have been extensively researched, there were no comprehensive, multidisciplinary theoretical frameworks of adolescent creativity to provide a foundation for this study. Therefore, a grounded theory methodology was adopted for the purpose of constructing a new theory to describe and explain adolescents’ creativity in a range of domains. The study’s constructivist-interpretivist perspective viewed the data and findings as interpretations of adolescents’ creative experiences, co-constructed by the participants and the researcher. The research was conducted in two academically selective high schools in Australia: one arts school, and one science, mathematics, and technology school. Twenty adolescent participants (10 from each school) were selected using theoretical sampling. Data were collected via focus groups, individual interviews, an online discussion forum, and email communications. Grounded theory methods informed a process of concurrent data collection and analysis; each iteration of analysis informed subsequent data collection. Findings portray creativity as it was perceived and experienced by participants, presented in a Grounded Theory of Adolescent Creativity. The Grounded Theory of Adolescent Creativity comprises a core category, Perceiving and Pursuing Novelty: Not the Norm, which linked all findings in the study. This core category explains how creativity involved adolescents perceiving stimuli and experiences differently, approaching tasks or life unconventionally, and pursuing novel ideas to create outcomes that are not the norm when compared with outcomes by peers. Elaboration of the core category is provided by the major categories of findings. That is, adolescent creativity entailed utilising a network of Sub-Processes of Creativity, using strategies for Managing Constraints and Challenges, and drawing on different Approaches to Creativity – adaptation, transfer, synthesis, and genesis – to apply the sub-processes and produce creative outcomes. Potentially, there were Effects of Creativity on Creators and Audiences, depending on the adolescent and the task. Three Types of Creativity were identified as the manifestations of the creative process: creative personal expression, creative boundary pushing, and creative task achievement. Interactions among adolescents’ dispositions and environments were influential in their creativity. Patterns and variations of these interactions revealed a framework of four Contexts for Creativity that offered different levels of support for creativity: high creative disposition–supportive environment; high creative disposition–inhibiting environment; low creative disposition–supportive environment; and low creative disposition–inhibiting environment. These contexts represent dimensional ranges of how dispositions and environments supported or inhibited creativity, and reveal that the optimal context for creativity differed depending on the adolescent, task, domain, and environment. This study makes four main contributions, which have methodological and theoretical implications for researchers, as well as practical implications for adolescents, parents, teachers, policy and curriculum developers, and other interested stakeholders who aim to foster the creativity of adolescents. First, this study contributes methodologically through its constructivist-interpretivist grounded theory methodology combining the grounded theory approaches of Corbin and Strauss (2008) and Charmaz (2006). Innovative data collection was also demonstrated through integration of data from online and face-to-face interactions with adolescents, within the grounded theory design. These methodological contributions have broad applicability to researchers examining complex constructs and processes, and with populations who integrate multimedia as a natural form of communication. Second, applicable to creativity in diverse domains, the Grounded Theory of Adolescent Creativity supports a hybrid view of creativity as both domain-general and domain-specific. A third major contribution was identification of a new form of creativity, educational creativity (ed-c), which categorises creativity for learning or achievement within the constraints of formal educational contexts. These theoretical contributions inform further research about creativity in different domains or multidisciplinary areas, and with populations engaged in formal education. However, the key contribution of this research is that it presents an original Theory and Model of Adolescent Creativity to explain the complex, multifaceted phenomenon of adolescents’ creative experiences.