The potential for utilising the collaborative learning spaces approach in the delivery of résumé development education

This study investigated the potential for using collaborative learning spaces for the development of résumé writing knowledge and skills in higher education students. Utilising a collaborative learning environment, 227 students from a mix of programmes and year levels participated in one of 24 workshops centering on a technology supported, shared review and reflection approach to résumé construction. It was concluded that use of technology supported collaborative learning spaces has the potential to be a valuable, innovative approach for the delivery of career management related skills in higher education.

Initial design and physical characterization of a polymeric device for osmosis-driven delayed burst delivery of vaccines

Achieving the combination of delayed and immediate release of a vaccine from a delivery device without applying external triggers remains elusive in implementing single administration vaccination strategies. Here a means of vaccine delivery is presented, which exploits osmosis to trigger delayed burst release of an active compound. Poly(-caprolactone) capsules of 2 mm diameter were prepared by dip-coating, and their burst pressure and release characteristics were evaluated. Burst pressures (in bar) increased with wall thickness (t in mm) following Pburst = 131.t + 3.4 (R2 = 0.93). Upon immersion in PBS, glucose solution-filled capsules burst after 8.7 ± 2.9 days. Copolymers of hydrophobic  -caprolactone and hydrophilic polyethylene glycol were synthesized and their physico-chemical properties were assessed. With increasing hydrophilic content, the copolymer capsules showed increased water uptake rates and maximum weight increase, while the burst release was earlier: 5.6 ± 2.0 days and 1.9 ± 0.2 days for 5 and 10 wt% polyethylene glycol, respectively. The presented approach enables the reproducible preparation of capsules with high versatility in materials and properties, while these vaccine delivery vehicles can be prepared separately from, and independently of the active compound.

Preparing engineering graduates for the knowledge economy through blended delivery of mathematics

Contemporary higher education institutions are making significant efforts to develop cohesive, meaningful and effective learning experiences for Science, Technology, Engineering and Mathematics (STEM) curricula to prepare graduates for challenges in the modern knowledge economy, thus enhancing their employability (Carnevale et al, 2011). This can inspire innovative redesign of learning experiences embedded in technology-enhanced educational environments and the development of research-informed, pedagogically reliable strategies fostering interactions between various agents of the learning-teaching process. This paper reports on the results of a project aimed at enhancing students’ learning experiences by redesigning a large, first year mathematics unit for Engineering students at a large metropolitan public university. Within the project, the current study investigates the effectiveness of selected, technology-mediated pedagogical approaches used over three semesters. Grounded in user-centred instructional design, the pedagogical approaches explored the opportunities for learning created by designing an environment containing technological, social and educational affordances. A qualitative analysis of mixed-type questionnaires distributed to students indicated important inter-relations between participants’ frames of references of the learning-teaching process and stressed the importance (and difficulty) of creating appropriate functional context. Conclusions drawn from this study may inform instructional design for blended delivery of STEM-focused programs that endeavor to enhance students’ employability by educating work-ready graduates.

Regulating unilateral supermarket misconduct as customer/acquirer of goods and services

Supermarkets in Australia may have substantial market power as buyers in wholesale markets for grocery products. They may also have substantial bargaining power in negotiating contracts with their suppliers of grocery products. The Competition and Consumer Act 2010 (Cth) (CCA) regulates misconduct by supermarkets as customer/acquirers in three ways. First, s 46(1) of the CCA prohibits the ‘taking advantage’ of buyer power for the purpose of damaging a competitor, preventing entry or deterring or preventing competitive conduct. Secondly, s 21 of the ACL prohibits unconscionable conduct in business–to–business transactions. Thirdly, Pt IVB of the CCA provides for the promulgation of mandatory and voluntary industry codes of conduct. Since 1 July 2015 the conduct of supermarkets as customer/acquirers has been regulated by the Food and Grocery Industry Code of Conduct. This article examines these three different approaches. It considers them against the background of the misconduct at issue in ACCC v Coles Supermarkets Australia Pty Ltd which the ACCC chose to litigate as an unconscionable conduct case, rather than a misuse of market power case. The article also considers the strengths and weaknesses of each of the three approaches and concludes that while the three approaches address different problems there is scope for overlap and all three should be retained for compete coverage.

In vivo evaluation of folate decorated cross-linked micelles for the delivery of platinum anticancer drugs

The biodistribution of micelles with and without folic acid targeting ligands were studied using a block copolymer consisting of acrylic acid (AA) and polyethylene glycol methyl ether acrylate (PEGMEA) blocks. The polymers were prepared using RAFT polymerization in the presence of a folic acid functionalized RAFT agent. Oxoplatin was conjugated onto the acrylic acid block to form amphiphilic polymers which, when diluted in water, formed stable micelles. In order to probe the in vivo stability, a selection of micelles were cross-linked using 1,8-diamino octane. The sizes of the micelles used in this study range between 75 and 200 nm, with both spherical and worm-like conformation. The effects of cross-linking, folate conjugation and different conformation on the biodistribution were studied in female nude mice (BALB/c) following intravenous injection into the tail vein. Using optical imaging to monitor the fluorophore-labeled polymer, the in vivo biodistribution of the micelles was monitored over a 48 h time-course after which the organs were removed and evaluated ex vivo. These experiments showed that both cross-linking and conjugation with folic acid led to increased fluorescence intensities in the organs, especially in the liver and kidneys, while micelles that are not conjugated with folate and not cross-linked are cleared rapidly from the body. Higher accumulation in the spleen, liver, and kidneys was also observed for micelles with worm-like shapes compared to the spherical micelles. While the various factors of cross-linking, micelle shape, and conjugation with folic acid all contribute separately to prolong the circulation time of the micelle, optimization of these parameters for drug delivery devices could potentially overcome adverse effects such as liver and kidney toxicity.

Implementing best practice principles in the delivery of a Learner Driver Mentor Program in rural Queensland: A case study report

Learner Driver Mentor Programs (LDMPs) assist disadvantaged learner drivers to gain supervised on-road driving experience by providing access to vehicles and volunteer mentors. In the absence of existing research investigating the implementation of Best Practice principles in LDMPs, this case study examines successful program operation in the context of a rural town setting. The study is based on an existing Best Practice model for LDMPs, and triangulation of data from a mentor focus group (n = 7), interviews with program stakeholders (n = 9), and an in-depth interview with the site-based program development officer. The data presented is based upon selected findings of the broader evaluation study. Preliminary findings regarding driving session management, support of mentors and mentees, and building and maintaining relationships with program stakeholders, are discussed. Key findings relate to the importance of relationships in engagement with the program and collaborating across sectors to achieve a range of positive outcomes for learners. The findings highlight the need for the program to be relevant and responsive to the requirements of the population and the context in which it is operating.

Many disciplines-common approach: Experiences in the development and delivery of an interprofessional health subject

In 2004, the Faculty of Health Sciences at La Trobe University in Victoria, Australia, introduced a new, final-year subject ‘Interdisciplinary Professional Practice’. The subject is taught to all students enrolled in the 11 allied health and human service disciplines at La Trobe University across metropolitan and rural campuses. The delivery is online to overcome timetabling barriers and to provide time and geographic flexibility. The subject is presented using an enquiry-based learning model. Students are exposed to the concepts of interdisciplinary teamwork through shared learning across professional boundaries to enable a collaborative workforce. An outline of the background development and design of this subject, and its implementation and content areas is presented. A discussion of relevant literature and an analysis of the subject evaluations and focus groups that have guided subject development to enhance student learning over eight cohorts is included.

A comparative study of governmental one-stop portals for public service delivery

The continuing need for governments to radically improve the delivery of public services has led to a new, holistic government reform strategy labeled “Transformational Government” that strongly emphasizes customer-centricity. Attention has turned to online portals as a cost effective front-end to deliver services and engage customers as well as to the corresponding organizational approaches for the back-end to decouple the service interface from the departmental structures. The research presented in this paper makes three contributions: Firstly, a systematic literature review of approaches to the evaluation of online portal models in the public sector is presented. Secondly, the findings of a usability study comparing the online presences of the Queensland Government, the UK Government and the South Australian Government are reported and the relative strengths and weaknesses of the different approaches are discussed. And thirdly, the limitations of the usability study in the context of a broader “Transformational Government” approach are identified and service bundling is suggested as an innovative solution to further improve online service delivery.

Synthesis of an erodible biomimetic hydrogel for drug delivery using native chemical ligation

Hydrogels are hydrophilic, three dimensional polymers that imbibe large quantities of water while remaining insoluble in aqueous solutions due to chemical or physical cross-linking. The polymers swell in water or biological fluids, immobilizing the bioactive agent, leading to drug release in a well-defined specific manner. Thus the hydrogels’ elastic properties, swellability and biocompatibility make them excellent formulations for drug delivery. Currently, many drug potencies and therapeutic effects are limited or otherwise reduced because of the partial degradation that occurs before the administered drug reaches the desired site of action. On the other hand, sustained release medications release drugs continually, rather than providing relief of symptoms and protection solely when necessary. In fact, it would be much better if drugs could be administered in a manner that precisely matches physiological needs at desired times and at the desired site (site specific targeting). There is therefore an unmet need to develop controlled drug delivery systems especially for delivery of peptide and protein bound drugs. The purpose of this project is to produce hydrogels for structural drug delivery and time-dependent sustained release of drugs (bioactive agents). We use an innovative polymerisation strategy based on native chemical ligation (NCL) to covalently cross-link polymers to form hydrogels. When mixed in aqueous solution, four armed (polyethylene glycol) amine (PEG-4A) end functionalised with thioester and four branched Nterminal cysteine peptide dendrimers spontaneously conjugated to produce biomimetic hydrogels. These hydrogels showed superior resistance to shear stress compared to an equivalent PEG macromonomer system and were shown to be proteolytically degradable with concomitant release of a model payload molecule. This is the first report of a peptide dendrimers/PEG macromonomer approach to hydrogel production and opens up the prospect of facile hydrogel synthesis together with tailored payload release.

Preparation and in vitro evaluation of a polymer based controlled release dry powder inhaler formulation for pulmonary delivery

This thesis described the synthesis of an L-leucine conjugate of the biodegradable polymer, chitosan and its potential application for the development of controlled release nanoparticulate dry powder inhaler (DPI) formulations. The study demonstrated that the physicochemical properties of conjugated chitosan nanoparticles had favourable effects on the dispersibility and controlled release profile of a model drug. The toxicity profile of the nanoparticulate formulation revealed promising outcome for its use in pulmonary delivery. The chitosan conjugate produced in this project would be useful for the application of polymer nanoparticulate systems for efficient lung delivery of drugs.

Use of the biolistic particle delivery system to transform fungal genomes

Biolistic delivery of transforming DNA into fungal genomes, especially when performed on uninucleate haploid conidia, has proven successful in bypassing the time-consuming repetitive purification of protoplasts used for the widely applied polyethylene glycol-mediated method. Biolistic transformation is also relatively quick compared to other available methods and provides a high percentage of stable transformants.

Intravitreal drug delivery in retinal disease : are we out of our depth?

Introduction With the ever-increasing global burden of retinal disease, there is an urgent need to vastly improve formulation strategies that enhance posterior eye delivery of therapeutics. Despite intravitreal administration having demonstrated notable superiority over other routes in enhancing retinal drug availability, there still exist various significant physical/biochemical barriers preventing optimal drug delivery into the retina. A further complication lies with an inability to reliably translate laboratory-based retinal models into a clinical setting. Several formulation approaches have recently been evaluated to improve intravitreal therapeutic outcomes, and our aim in this review is to highlight strategies that hold the most promise. Areas covered We discuss the complex barriers faced by the intravitreal route and examine how formulation strategies including implants, nanoparticulate carriers, viral vectors and sonotherapy have been utilized to attain both sustained delivery and enhanced penetration through to the retina. We conclude by highlighting the advances and limitations of current in vitro, ex vivo and in vivo retinal models in use by researchers globally. Expert opinion Various nanoparticle compositions have demonstrated the ability to overcome the retinal barriers successfully; however, their utility is limited to the laboratory setting. Optimization of these formulations and the development of more robust experimental retinal models are necessary to translate success in the laboratory into clinically efficacious outcomes.

The feasibility, delivery and cost effectiveness of drink driving interventions : a qualitative analysis of professional stakeholders

Many intervention programs have been designed to decrease the rate of drink driving by altering the behavioural characteristics that may lead a person to drink and drive. However, most programs target high risk and repeat offenders. There is very little research on the feasibility and effectiveness of first offender programs. This project is part of a larger program of research that focuses on first time offenders, in order to reduce the rate of subsequent drink driving which may result in a repeat offence. A number of professional stakeholders were approached and interviewed with a view to capturing and reflecting current drink driving related concerns while developing an intervention in the context of Australian drink driving related legislation. The qualitative interviews involved open ended questioning which led to the themes discussed in the analysis. Included in the interviews were senior representatives from the Magistrates Court, Queensland Transport, Probation & Parole, Queensland Corrective Services, Royal Automobile Club Queensland (RACQ), Intraface Consulting (drug & alcohol EAP), Brisbane Police Prosecution Corps, Queensland Police Service and private practice psychology. Issues such as delivery of interventions, feasibility and cost-effectiveness were discussed, as were potential content and design. It was generally agreed that a tailored online intervention imposed as a sentencing option would be the most effective for first time offenders in terms of cost, ease of delivery and feasibility. The development of an online intervention program for first offenders is widely supported by professional stakeholders.