Environmental information provision, market valuation, and firm incentives: An empirical study of the Japanese PRTR system

The environmental performance of a listed firm could affect its level of investment in pollution prevention and its access to financial markets. Previous studies using Tobin's q that explore market response to environmental performance do not distinguish between the impact of performance on investment and market response, which may mislead conclusions. To overcome this problem, we simultaneously estimate the functions of the intangible asset, the replacement cost, and the toxic chemical risk. We find that the Japanese financial market does not value risk associated with toxic chemical releases. Nevertheless, even without market valuation, firms increase investment to reduce pollution. © 2010 by the Board of Regents of the University of Wisconsin System.

Does the housing market respond to information disclosure? : Effects of toxicity indices in Japan

The policy instruments that provide information on a firm's or facility's environmental performance, such as the U.S. Toxic Release Inventory (TRI) and the Pollutant Release and Transfer Register system (PRTRs) used in some European countries and Japan, play an important role in encouraging firms or facilities to improve their environmental performance, if investors, consumers and residents recognize their environmental performance. This study uses a hedonic approach to explore how the Japanese rental housing market responds to carcinogenic risk arising from releases and transfers of chemical substances produced and used at close facilities. We found that residents do not perceive carcinogenic risk generated more than 1.0 km away from their residence and that they seem to recognize the increased carcinogenic risk at distances from 0.5 km to 1.0 km away; a 1% increase in carcinogenic risk reduces the average rent by 0.0007%. The distance at which residents perceive the risk arising from such facilities is less than in previous studies. This suggests that the risk perception recognized in previous studies may capture the other externalities in addition to the chemical risk because the risk is measured by the distance.

Internet marketing and export market growth in Chile

Previous studies show that the Internet positively influences firms’ export activities from developed markets. However, the literature is vague as to whether the Internet has an impact on the export performance of firms from emerging markets. This study tests a conceptual model that includes the effect of Internet marketing capabilities on export market growth in an emerging market. Drawing on a cross-national sample of 204 export firms from a Latin American country (Chile), findings indicate that Internet marketing capabilities positively influence the availability of export information, which in turn impacts the development of business network relationships and export market growth.

Web mediated market interactions and enterprise software

With increased consolidation and a few large vendors dominating the market, how can software vendors distinguish themselves in order to maintain profitability and gain market share? Increasingly customers are becoming more proactive in selecting a vendor and a product, drawing upon various publications, market surveys, mailing lists, and, of course, other users. In particular, though, a company's Web site is the obvious place to begin information gathering. In sum, it may seem that the days of the uninformed customer prepared to be "sold to" are potentially all but gone.

New country market feasibility analyses

Opportunity screening is also known as feasibility testing, which is the process of assessing whether a particular business opportunity is within the capacity of either an entrepreneur or an intrapreneur, and also whether it can create sustainable revenues. As the funnel diagram shows, the number of opportunities diminishes as we move to the right through the diagram. This is because not every idea identified in the opportunity identification stage as potentially interesting, and then framed into a business opportunity in the opportunity development stage, will satisfy the formal and informal screening criteria. The informal screening process occurs in all stages of the development process. For example, not every idea that has been identified will be converted into a business opportunity; similarly, not every business opportunity progresses to a feasibility test. Subsequently, only the best business opportunities are screened, and only the very best of those screened then progress to the business plan step.

Simulation study for analysis of online dielectric measurement problems on transformer insulation system

Determining the condition as well as the remaining life of an insulation system is essential for the reliable operation of large oil-filled power transformers. Frequency-domain spectroscopy (FDS) is one of the diagnostic techniques used to identify the dielectric status of a transformer. Currently, this technique can only be implemented on a de-energized transformer. This paper presents an initial investigation into a novel online monitoring method based on FDS dielectric measurements for transformers. The proposed technique specifically aims to address the real operational constraints of online testing. This is achieved by designing an online testing model extending the basic “extended Debye” linear dielectric model and taking unique noise issues only experienced during online measurements into account via simulations. Approaches to signal denoising and potential problems expected to be encountered during online measurements will also be discussed. Using fixed-frequency sinusoidal excitation waveforms will result in a long measurement times. The use of alternatives such as a chirp has been investigated using simulations. The results presented in the paper predict that reliable measurements should be possible during online testing.

A motor controller using field oriented control and Hall effect rotor position sensors : simulation and implementation

A field oriented control (FOC) algorithm is simulated and implemented for use with a permanent magnet synchronous motor (PMSM). Rotor position is sensed using Hall effect switches on the stator because other hardware position sensors attached to the rotor may not be desirable or cost effective for certain applications. This places a limit on the resolution of position sensing – only a few Hall effect switches can be placed. In this simulation, three sensors are used and the position information is obtained at higher resolution by estimating it from the rotor dynamics, as shown in literature previously. This study compares the performance of the method with an incremental encoder using simulations. The FOC algorithm is implemented using Digital Motor Control (DMC) and IQ Texas Instruments libraries from a Simulink toolbox called Embedded Coder, and downloaded into a TI microcontroller (TMS320F28335) known as the Piccolo via Code Composer Studio (CCS).

Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying

Plant food materials have a very high demand in the consumer market and therefore, improved food products and efficient processing techniques are concurrently being researched in food engineering. In this context, numerical modelling and simulation techniques have a very high potential to reveal fundamentals of the underlying mechanisms involved. However, numerical modelling of plant food materials during drying becomes quite challenging, mainly due to the complexity of the multiphase microstructure of the material, which undergoes excessive deformations during drying. In this regard, conventional grid-based modelling techniques have limited applicability due to their inflexible grid-based fundamental limitations. As a result, meshfree methods have recently been developed which offer a more adaptable approach to problem domains of this nature, due to their fundamental grid-free advantages. In this work, a recently developed meshfree based two-dimensional plant tissue model is used for a comparative study of microscale morphological changes of several food materials during drying. The model involves Smoothed Particle Hydrodynamics (SPH) and Discrete Element Method (DEM) to represent fluid and solid phases of the cellular structure. Simulation are conducted on apple, potato, carrot and grape tissues and the results are qualitatively and quantitatively compared and related with experimental findings obtained from the literature. The study revealed that cellular deformations are highly sensitive to cell dimensions, cell wall physical and mechanical properties, middle lamella properties and turgor pressure. In particular, the meshfree model is well capable of simulating critically dried tissues at lower moisture content and turgor pressure, which lead to cell wall wrinkling. The findings further highlighted the potential applicability of the meshfree approach to model large deformations of the plant tissue microstructure during drying, providing a distinct advantage over the state of the art grid-based approaches.

Numerical simulation of micro-scale morphological changes of plant food materials during drying - a meshfree approach

This thesis developed a high preforming alternative numerical technique to investigate microscale morphological changes of plant food materials during drying. The technique is based on a novel meshfree method, and is more capable of modeling large deformations of multiphase problem domains, when compared with conventional grid-based numerical modeling techniques. The developed cellular model can effectively replicate dried tissue morphological changes such as shrinkage and cell wall wrinkling, as influenced by moisture reduction and turgor loss.