Stimulation of osteogenic and angiogenic ability of cells on polymers by pulsed laser deposition of uniform akermanite-glass nanolayer

Polymer biomaterials have been widely used for bone replacement/regeneration because of their unique mechanical properties and workability. Their inherent low bioactivity makes them lack osseointegration with host bone tissue. For this reason, bioactive inorganic particles have been always incorporated into the matrix of polymers to improve their bioactivity. However, mixing inorganic particles with polymers always results in inhomogeneity of particle distribution in polymer matrix with limited bioactivity. This study sets out to apply the pulsed laser deposition (PLD) technique to prepare uniform akermanite (Ca2MgSi2O7, AKT) glass nanocoatings on the surface of two polymers (non-degradable polysulfone (PSU) and degradable polylactic acid (PDLLA)) in order to improve their surface osteogenic and angiogenic activity. The results show that a uniform nanolayer composed of amorphous AKT particles (∼30nm) of thickness 130nm forms on the surface of both PSU and PDLLA films with the PLD technique. The prepared AKT-PSU and AKT-PDLLA films significantly improved the surface roughness, hydrophilicity, hardness and apatite mineralization, compared with pure PSU and PDLLA, respectively. The prepared AKT nanocoatings distinctively enhance the alkaline phosphate (ALP) activity and bone-related gene expression (ALP, OCN, OPN and Col I) of bone-forming cells on both PSU and PDLLA films. Furthermore, AKT nanocoatings on two polymers improve the attachment, proliferation, VEGF secretion and expression of proangiogenic factors and their receptors of human umbilical vein endothelial cells (HUVEC). The results suggest that PLD-prepared bioceramic nanocoatings are very useful for enhancing the physicochemical, osteogenic and angiogenic properties of both degradable and non-degradable polymers for application in bone replacement/regeneration.

The music industry in an age of digital distribution

In 1999 the global recorded music industry had experienced a period of growth that had lasted for almost a quarter of a century. Approximately one billion records were sold worldwide in 1974, and by the end of the century, the number of records sold was more than three times as high. At the end of the nineties, spirits among record label executives were high and few music industry executives at this time expected that a team of teenage Internet hackers, led by Shawn Fanning (at the time a student at Northeastern University in Boston) would ignite the turbulent process that eventually would undermine the foundations of the industry.

The potential of XML technology as an answer to the data interchange problems of the construction industry

The complex supply chain relations of the construction industry, coupled with the substantial amount of information to be shared on a regular basis between the parties involved, make the traditional paper-based data interchange methods inefficient, error prone and expensive. The successful information technology (IT) applications that enable seamless data interchange, such as the Electronic Data Interchange (EDI) systems, have generally failed to be successfully implemented in the construction industry. An alternative emerging technology, Extensible Markup Language (XML), and its applicability to streamline business processes and to improve data interchange methods within the construction industry are analysed, as is the EDI technology to identify the strategic advantages that XML technology provides to overcome the barriers to implementation. In addition, the successful implementation of XML-based automated data interchange platforms for a large organization, and the proposed benefits thereof, are presented as a case study.

Defence industry projects : investigating the impact of major project manager attributes on stakeholder relationships and project success

This thesis identifies attributes, skills and behaviours that major project managers require for stakeholder relationships competence and project success within a major project environment. It develops valid and reliable measures of internal and external stakeholder relationships competence, tests a complex conceptual model and explores the effectiveness of the QUT Executive Masters of Complex Project Management and Strategic Procurement in developing major project managers' stakeholder relationships competence. Implications of this thesis are for government and industry in identifying factors associated with major project success, as this will lead to better major project outcomes potentially resulting in time and monetary savings of years and billions of dollars.

Vocational education in science technology, engineering and maths (STEM) : Curriculum innovation through industry school partnerships

Governments have recognised that the technological trades rely on knowledge embedded traditionally in science, technology, engineering and mathematics (STEM) disciplines. In this paper, we report preliminary findings on the development of two curricula that attempt to integrate science and mathematics with workplace knowledge and practices. We argue that these curricula provide educational opportunities for students to pursue their preferred career pathways. These curricula were co-developed by industry and educational personnel across two industry sectors, namely, mining and aerospace. The aim was to provide knowledge appropriate for students moving from school to the workplace in the respective industries. The analysis of curriculum and associated policy documents reveals that the curricula adopt applied learning orientations through teaching strategies and assessment practices which focus on practical skills. However, although key theoretical science and maths concepts have been well incorporated, the extent to which knowledge deriving from workplace practices is included varies across the curricula. Our findings highlight the importance of teachers having substantial practical industry experience and the role that whole school policies play in attempts to align the range of learning experiences with the needs of industry.

The Australian mining industry and the ideal mining woman : mobilizing a public business case for gender equality

Despite ongoing ‘boom’ conditions in the Australian mining industry, women remain substantially and unevenly under-represented in the sector, as is the case in other resource-dependent countries. Building on the literature critiquing business-case rationales and strategies as a means to achieve women’s equality in the workplace, we examine the business case for employing more women as advanced by the Australian mining industry. Specifically, we apply a discourse analysis to seven substantial, publically-available documents produced by the industry’s national and state peak organizations between 2005 and 2013. Our study makes two contributions. First, we map the features of the business case at the sectoral rather than firm or workplace level and examine its public mobilization. Second, we identify the construction and deployment of a normative identity – ‘the ideal mining woman’ – as a key outcome of this business-case discourse. Crucially, women are therein positioned as individually responsible for gender equality in the workplace.

A Triple Bottom Line Planning Tool for Measuring Sustainability : A Systems Approach to Sustainability Using the Australian Dairy Industry as a Case Study

Sustainability is a key driver for decisions in the management and future development of organisations and industries. However, quantifying and comparing sustainability across the triple bottom line (TBL) of economy, environment and social impact, has been problematic. There is a need for a tool which can measure the complex interactions within and between the environmental, economic and social systems which affect the sustainability of an industry in a transparent, consistent and comparable way. The authors acknowledge that there are currently numerous ways in which sustainability is measured and multiple methodologies in how these measurement tools were designed. The purpose of this book is to showcase how Bayesian network modelling can be used to identify and measure environmental, economic and social sustainability variables and to understand their impact on and interaction with each other. This book introduces the Sustainability Scorecard, and describes it through a case study on sustainability of the Australian dairy industry. This study was conducted in collaboration with the Australian dairy industry.

Handmade clay balls and recycled crush glass as alternative media in water filtration

For many years materials such as quarried sand, anthracite, and granular activated carbon have been the principal media-products traditionally used in water and wastewater filtration plants. Pebble Matrix Filtration (PMF) is a novel non-chemical, sustainable pre-treatment method of protecting Slow Sand Filters (SSF) from high turbidity during heavy monsoon periods. PMF uses sand and pebbles as the filter media and the sustainability of this new technology might depend on availability and supply of pebbles and sand, both finite resources. In many countries there are two principal methods of obtaining pebbles and sand, namely dredging from rivers and beaches, and due to the scarcity of these resources in some countries the cost of pebbles is often 4-5 times higher than that of sand. In search for an alternative medium to pebbles after some preliminary laboratory tests conducted in Colombo-Sri Lanka, Poznan-Poland and Cambridge-UK, a 100-year-old brick factory near Sudbury, Suffolk, has produced hand-made clay pebbles satisfying the PMF quality requirements. As an alternative to sand, crushed recycled glass from a UK supplier was used and the PMF system was operated together with hand-made clay balls in the laboratory for high turbidity removal effectively. The results of laboratory experiments with alternative media are presented in this paper. There are potential opportunities for recycled crushed glass and clay ball manufacturing processes in some countries where they can be used as filter media.

Sweet sorghum : opportunities for a new, renewable fuel and food industry in Australia

Sweet sorghum is receiving significant global interest as an agro-industrial crop because of its capacity to co-produce energy, food, and feed products in integrated biorefineries. This report assesses the opportunities to develop a sweet sorghum industry in Australia, reports on research demonstrating the production of energy, food, and feed products, and assesses the potential economic and sustainability benefits of sweet sorghum biorefineries in the Australian context.

Google Glass as a technique of self and the revitalisation of the monad

As the boundaries between public and private, human and technology, digital and social, mediated and natural, online and offline become increasingly blurred in modern techno-social hybrid societies, sociology as a discipline needs to adapt and adopt new ways of accounting for these digital cultures. In this paper I use the social networking site Pinterest to demonstrate how people today are shaped by, and in turn shape, the digital tools they are assembled with. Digital sociology is emerging as a sociological subdiscipline that engages with the convergence of the digital and the social. However, there seems to be a focus on developing new methods for studying digital social life, yet a neglect of concrete explorations of its culture. I argue for the need for critical socio-cultural ‘thick description’ to account for the interrelations between humans and technologies in modern digitally mediated cultures.

Structured contract strategies for capital and operations expenditure projects in the oil and gas industry

This project was a step forward in developing a 'descriptive theory' of contracting in the oil and gas industry that reflects the operating environment in which the project manager operates. This study investigates the existing processes and methods used in establishing contracts which are very often prescriptive, and not always appropriate or optimal for a given situation. This study contributes to contracting effectiveness or optimal contracting in the oil and gas industry.

ACE research vignette 031: Startups lead the way in creating a nanobiotechnology industry

This series of research vignettes is aimed at sharing current and interesting research findings from our team of international Entrepreneurship researchers. In this vignette, Dr Martin Bliemel and his research team explore the emergence and evolution of a new knowledge intensive industry, i.e. the nanobiotechnology industry.

ACE research briefing paper 007 : Ken Talbot - an entrepreneur's contribution to the growth of the Australian Mining Industry

Ken Talbot was one of Australian mining’s most successful entrepreneurs and rose to the top of his industry to become one of Australia’s wealthiest men. Although the nation’s resources industry is synonymous with global names such as Xstrata, BHP Billiton and Rio Tinto, Ken was an individual who made a big impact on the development and growth of the sector. This case study examines Ken’s achievements, his transition from employee to entrepreneur, and the qualities that enabled him to succeed at such a high level. In particular, it focuses on his Jellinbah and Coppabella mining developments that directly led to the creation of Macarthur Coal and the Talbot Group. By the time of his premature death in an African plane crash in 2010, Ken had amassed a fortune estimated at almost $1 billion and was aged just 59. The last publically available Talbot Group annual report for calendar year 2009 showed that the investment portfolio of the group returned 113 per cent that year. Even throughout the global financial crisis the portfolio made a positive return on investment of no less than 10 per cent. Ken’s sense of mateship and his tremendous people skills were keys to his success in the mining industry and the wider community. In addition to excelling in business, he is also remembered for his philanthropy and leaving 30 per cent of his estate to charity through the Talbot Family Foundation.

Self-labelling versus behavioural experience of workplace bullying : differences in sector- and industry-level prevalence and sources

This study reports on differences in self-labelling versus the behavioural experience of workplace bullying across sectors and industries for a sample of 6,406 Australian employees, as well as differences in source of workplace bullying. It was found that overall prevalence rates of workplace bullying were 2.9% (self-labelling method) and 4.0% (behavioural experience method). Exposure to workplace bullying was found to decrease with age. There was no significant difference between the public and private sectors, or among industries, in the prevalence of workplace bullying; however, two industries (Construction; Health and Community Services) showed a significantly higher rate of workplace bullying with the behavioural experience method compared to the self-labelling method. For the overall sample, the most prevalent source of workplace bullying was reported to be coworkers (49.1%), followed by clients (35.7%), and then supervisors (27.4%). Subordinates were rated as the source in 7.9% of cases. Closer examination of source as a function of sector and industry revealed a number of significant differences specific to sectors and industries, highlighting the need for tailored approaches for managing workplace bullying.

Professional development and social networks in digital content industry micro businesses

This study explores the professional development strategies of digital content professionals in Australian micro businesses. This thesis presents the argument that as these professionals are working in cutting edge creative fields where digital technology drives ongoing change, formal education experiences may be less important than for other professionals, and that specific types of online and face-to-face socially mediated informal learning strategies may be critical to currency. This thesis documents the findings of a broad survey of industry professionals' learning needs and development strategies, in conjunction with rich data from in-depth interviews and social network analyses.