Ink-jet printing of graphene for flexible electronics: An environmentally-friendly approach

Mechanical flexibility is considered an asset in consumer electronics and next-generation electronic systems. Printed and flexible electronic devices could be embedded into clothing or other surfaces at home or office or in many products such as low-cost sensors integrated in transparent and flexible surfaces. In this context inks based on graphene and related two-dimensional materials (2DMs) are gaining increasing attention owing to their exceptional (opto)electronic, electrochemical and mechanical properties. The current limitation relies on the use of solvents, providing stable dispersions of graphene and 2DMs and fitting the proper fluidic requirements for printing, which are in general not environmentally benign, and with high boiling point. Non-toxic and low boiling point solvents do not possess the required rheological properties (i.e., surface tension, viscosity and density) for the solution processing of graphene and 2DMs. Such solvents (e.g., water, alcohols) require the addition of stabilizing agents such as polymers or surfactants for the dispersion of graphene and 2DMs, which however unavoidably corrupt their properties, thus preventing their use for the target application. Here, we demonstrate a viable strategy to tune the fluidic properties of water/ethanol mixtures (low-boiling point solvents) to first effectively exfoliate graphite and then disperse graphene flakes to formulate graphene-based inks. We demonstrate that such inks can be used to print conductive stripes (sheet resistance of ~13 kΩ/□) on flexible substrates (polyethylene terephthalate), moving a step forward towards the realization of graphene-based printed electronic devices.

Respite & Recoery at Al Wakra

International Design Competition for Qatar Psychiatric Hospital. The scheme for the Al Wakra Respite and Recovery Centre delivers on an all-in attitude toward evidence-based design. It sets new benchmarks in so many ways: the way it allows excellent separation between patient cohorts without unnecessary or visible restrictions; the way it allows sharing of most of the clinical kit and spaces; the way services reticulation and facilities management takes place without compromising security and safety; the ways It abandons the institutional axioms that are still so ubiquitous elsewhere, so it can appear as the friendly, welcoming and wholesome; the way it allows incredible flexibility to allow changes or flexion on the fly; the way it has such ‘good bones’ for more structural changes as the future unfolds. But most importantly, the scheme will be exemplary in the way the building itself plays a role in promoting the recovery and mental well-being of its residents. Like no other, the Centre will rise to the challenges of supporting and inspiring an exemplary mental health service and promote the well-being of the patients. The 160 bed scheme allows for 43,000m2 of landscape, packed with wholesome things to do and experience. The Aspire zone even has stables and a falconry, both to celebrate the love that Qatari people have for horses and birds.

Significant deterioration in nanomechanical quality occurs through incomplete extrafibrillar mineralization in rachitic bone: Evidence from in-situ synchrotron X-ray scattering and backscattered electron imaging

Bone diseases such as rickets and osteoporosis cause significant reduction in bone quantity and quality, which leads to mechanical abnormalities. However, the precise ultrastructural mechanism by which altered bone quality affects mechanical properties is not clearly understood. Here we demonstrate the functional link between altered bone quality (reduced mineralization) and abnormal fibrillar-level mechanics using a novel, real-time synchrotron X-ray nanomechanical imaging method to study a mouse model with rickets due to reduced extrafibrillar mineralization. A previously unreported N-ethyl-N-nitrosourea (ENU) mouse model for hypophosphatemic rickets (Hpr), as a result of missense Trp314Arg mutation of the phosphate regulating gene with homologies to endopeptidase on the X chromosome (Phex) and with features consistent with X-linked hypophosphatemic rickets (XLHR) in man, was investigated using in situ synchrotron small angle X-ray scattering to measure real-time changes in axial periodicity of the nanoscale mineralized fibrils in bone during tensile loading. These determine nanomechanical parameters including fibril elastic modulus and maximum fibril strain. Mineral content was estimated using backscattered electron imaging. A significant reduction of effective fibril modulus and enhancement of maximum fibril strain was found in Hpr mice. Effective fibril modulus and maximum fibril strain in the elastic region increased consistently with age in Hpr and wild-type mice. However, the mean mineral content was ∼21% lower in Hpr mice and was more heterogeneous in its distribution. Our results are consistent with a nanostructural mechanism in which incompletely mineralized fibrils show greater extensibility and lower stiffness, leading to macroscopic outcomes such as greater bone flexibility. Our study demonstrates the value of in situ X-ray nanomechanical imaging in linking the alterations in bone nanostructure to nanoscale mechanical deterioration in a metabolic bone disease. Copyright

Compositional agent-based models for electricity distribution networks

This thesis presents a novel approach to building large-scale agent-based models of networked physical systems using a compositional approach to provide extensibility and flexibility in building the models and simulations. A software framework (MODAM - MODular Agent-based Model) was implemented for this purpose, and validated through simulations. These simulations allow assessment of the impact of technological change on the electricity distribution network looking at the trajectories of electricity consumption at key locations over many years.

Use of personal mobility devices for first-and-last mile travel: The Macquarie-Ryde trial

Electric-motored personal mobility devices (PMDs) are appearing on Australian roads. While legal to import and own, their use is typically illegal for adult riders within the road transport system. However, these devices could provide an answer to traffic congestion by getting people out of cars for short trips (“first-and-last mile” travel). City of Ryde council, Macquarie University, and Transport for NSW examined PMD use within the road transport system. Stage 1 of the project examined PMD use within a controlled pedestrian environment on the Macquarie University campus. Three PMD categories were used: one-wheelers (an electric unicycle, the Solowheel); two-wheelers (an electric scooter, the Egret); and three-wheelers (the Qugo). The two-wheeled PMD was most effective in terms of flexibility. In contrast, the three-wheeled PMD was most effective in terms of speed. One-wheeled PMD riders were very satisfied with their device, especially at speed, but significant training and practice was required. Two-wheeled PMD riders had less difficulty navigating through pedestrian precincts and favoured the manoeuvrability of the device as the relative narrowness of the two-wheeled PMD made it easier to use on a diversity of path widths. The usability of all PMDs was compromised by the weight of the devices, difficulties in ascending steeper gradients, portability, and parking. This was a limited trial, with a small number of participants and within a unique environment. However, agreement has been reached for a Stage 2 extension into the Macquarie Park business precinct for further real-world trials within a fully functional road transport system.

Podiatry scope of practice: The role of gender in identification as a specialist

Background Ensuring efficient and effective delivery of health care to an aging population has been a major driver for a review of the health workforce in Australia. As part of this review a new National Registration and Accreditation Scheme (NRAS) has evolved with one goal being to improve workforce flexibility. With increased flexibility there have been discussions about the role specialist scopes of practice plays. This study explored the role of gender and other work related characteristics in relation to contemporary scope of podiatry practice and specialisation in Australia. Methods A cross sectional survey was administered through an on-line survey tool on behalf of the Australasian Podiatry Council. Descriptive data was collected over a three-week period. Queensland University of Technology Human Research Ethics approval was sought and confirmed exemption from review, exemption number 1400000791. Results Of the podiatrists participating in this survey (n=218), they were predominately female (66%), early career (34%, 0-9 years) and work in private practices (78%) in multi-podiatrists centres (41%). Relationship between clinical activities performed and “self-perception” of performing a “specialist role” was significant for practitioners who undertook treatment of specific patient groups. The largest area of interest was biomechanics (n=65), followed closely by diabetes (n=61), a third area identified was paediatrics (n=26). Self-perception of specialist status was compared with gender, years of experience, location, primary work environment and clinical practice. When practitioners are asked to categorise themselves to be either “generalist” or “specialist/ generalist with a special interest” podiatrist, male gender was identified as being the only factor which would predict perception of status; 64% males identified as specialist, as opposed to 49% of female survey respondents (Chi square, df = 1, P = 0.044). Self-perception of specialist status was not explained by years of experience, location, working in rural versus urban environment, state worked in, or part-time/full-time work status. Conclusions In conclusion; gender, work environment plus area of interest form a complex relationship, which appear to influence both perception and reality of service provision. Incorporation of specialisation activity (surgical podiatry along with endorsement for use of scheduled medicines) will have lasting impact on the scope of the podiatry profession in Australia. To meet community expectation and maintain high standards, the addition of new subspecialties may be indicated.

Mitigating undesirable impacts in the marine environment: A review of market-based management measures

Internationally, marine biodiversity conservation objectives are having an increasing influence on the management of commercial fisheries. While this is largely being implemented through Marine Protected Areas (MPAs) other management measures, such as market based instruments (MBIs), have proved to be effective at managing target species catch in fisheries and reducing environmental impacts in industries such as mining and tourism. Market-based management measures aim to mitigate the impacts of activities by better aligning the incentives their participants face with the objectives of management, changing their behavior as a consequence. In this paper, we review the potential of MBIs as management tools to mitigate undesirable environmental impacts associated with commercial fishing. Where they exist, examples of previous applications are described and the factors that influence their applicability and effectiveness are discussed. Several fishing methods and impacts are considered and suggest that whilst no single approach is most appropriate in all circumstances either replacing or complementing existing management arrangements with MBIs has the potential to improve environmental performance. This has a number of implications. From the environmental perspective they should enable levels of undesirable impacts such as damage to sensitive habitat or the bycatch of protected species of turtles, marine mammals, and seabirds to be reduced. The increased flexibility MBIs allow industry when developing solutions also has the potential to reduce costs to both the industry and managers, improving the cost-effectiveness of regulation as a result. Further, in the increasingly relevant case of MPAs the need for publicly funded compensation, often paid to industry when vessels are excluded from grounds, may also be significantly reduced if improved environmental performance makes it possible for some industry members to continue operating.

Understanding how axial loads on the spine influence segmental biomechanics for idiopathic scoliosis patients: A magnetic resonance imaging study

Background Segmental biomechanics of the scoliotic spine are important since the overall spinal deformity is comprised of the cumulative coronal and axial rotations of individual joints. This study investigates the coronal plane segmental biomechanics for adolescent idiopathic scoliosis patients in response to physiologically relevant axial compression. Methods Individual spinal joint compliance in the coronal plane was measured for a series of 15 idiopathic scoliosis patients using axially loaded magnetic resonance imaging. Each patient was first imaged in the supine position with no axial load, and then again following application of an axial compressive load. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance. Findings The mean standing major Cobb angle for this patient series was 46°. Mean intra-observer measurement error for endplate inclination was 1.6°. Following loading, initially highly wedged discs demonstrated a smaller change in wedge angle, than less wedged discs for certain spinal levels (+ 2,+1,− 2 relative to the apex, (p < 0.05)). Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region. Interpretation While individual patients exhibit substantial variability in disc wedge angles and joint compliance, overall there is a pattern of increased disc wedging near the curve apex, and reduced joint compliance in this region. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics of the scoliotic spine, for analysis of deformity progression and surgical planning.

Inter-lamellar shear resistance confers compressive stiffness in the intervertebral disc: An image-based modelling study on the bovine caudal disc

The intervertebral disc withstands large compressive loads (up to nine times bodyweight in humans) while providing flexibility to the spinal column. At a microstructural level, the outer sheath of the disc (the annulus fibrosus) comprises 12–20 annular layers of alternately crisscrossed collagen fibres embedded in a soft ground matrix. The centre of the disc (the nucleus pulposus) consists of a hydrated gel rich in proteoglycans. The disc is the largest avascular structure in the body and is of much interest biomechanically due to the high societal burden of disc degeneration and back pain. Although the disc has been well characterized at the whole joint scale, it is not clear how the disc tissue microstructure confers its overall mechanical properties. In particular, there have been conflicting reports regarding the level of attachment between adjacent lamellae in the annulus, and the importance of these interfaces to the overall integrity of the disc is unknown. We used a polarized light micrograph of the bovine tail disc in transverse cross-section to develop an image-based finite element model incorporating sliding and separation between layers of the annulus, and subjected the model to axial compressive loading. Validation experiments were also performed on four bovine caudal discs. Interlamellar shear resistance had a strong effect on disc compressive stiffness, with a 40% drop in stiffness when the interface shear resistance was changed from fully bonded to freely sliding. By contrast, interlamellar cohesion had no appreciable effect on overall disc mechanics. We conclude that shear resistance between lamellae confers disc mechanical resistance to compression, and degradation of the interlamellar interface structure may be a precursor to macroscopic disc degeneration.

Specialisation versus special interest: The Australian podiatry experience

Background Ensuring efficient and effective delivery of health care to an ageing population has been a major driver for a review of the health workforce in Australia. As part of this process a National Registration and Accreditation Scheme (NRAS) has evolved with one goal being to improve workforce flexibility within a nationally consistent model of governance. In addition to increased flexibility, there have been discussions about maintaining standards and the role of specialisation. This study aims to explore the association between practitioners’ self-perceptions about their special interest in musculoskeletal, diabetes related and podopaediatric foot care and the actual podiatry services they deliver in Australia. Methods A cross sectional on-line survey was administered on behalf of the Australasian Podiatry Council and its’ state based member associations. Self-reported data were collected over a 3-week interval and captured information about the practitioners by gender, years of clinical experience, area of work by state, work setting, and location. For those participants that identified with an area of special interest or specialty, further questions were asked regarding support for the area of special interest through education, and activities performed in treating patients in the week prior to survey completion. Queensland University of Technology Human Research Ethics approval was sought and confirmed exemption from review. Results 218 podiatrists participated in the survey. Participants were predominately female and worked in private practices. The largest area of personal interest by the podiatrists was related to the field of musculoskeletal podiatry (n = 65), followed closely by diabetes foot care (n = 61), and a third area identified was in the management of podopaediatric conditions (n = 26). Conclusions Health workforce reform in Australia is in part being managed by the federal government with a goal to meet the health care needs of Australians into the future. The recognition of a specialty registration of podiatric surgery and endorsement for scheduled medicines was established with this workforce reform in mind. Addition of new subspecialties may be indicated based on professional development, to maintain high standards and meet community expectations.

Developing a best practice pathway to support improvements in Indigenous Australians' mental health and well-being: A qualitative study

Objective: There is a need to adapt pathways to care to promote access to mental health services for Indigenous people in Australia. This study explored Indigenous community and service provider perspectives of well-being and ways to promote access to care for Indigenous people at risk of depressive illness. Design: A participatory action research framework was used to inform the development of an agreed early intervention pathway; thematic analysis Setting: 2 remote communities in the Northern Territory. Participants: Using snowball and purposive sampling, 27 service providers and community members with knowledge of the local context and the diverse needs of those at risk of depression were interviewed. 30% of participants were Indigenous. The proposed pathway to care was adapted in response to participant feedback. Results: The study found that Indigenous mental health and well-being is perceived as multifaceted and strongly linked to cultural identity. It also confirms that there is broad support for promotion of a clear pathway to early intervention. Key identified components of this pathway were the health centre, visiting and community-based services, and local community resources including elders, cultural activities and families. Enablers to early intervention were reported. Significant barriers to the detection and treatment of those at risk of depression were identified, including insufficient resources, negative attitudes and stigma, and limited awareness of support options. Conclusions: Successful early intervention for wellbeing concerns requires improved understanding of Indigenous well-being perspectives and a systematic change in service delivery that promotes integration, flexibility and collaboration between services and the community, and recognises the importance of social determinants in health promotion and the healing process. Such changes require policy support, targeted training and education, and ongoing promotion.

Laboratories transformation

BACKGROUND OR CONTEXT Laboratories provide the physical spaces for engineering students to connect with theory and have a personal hands-on learning experience. Learning space design and development is well established in many universities however laboratories are often not part of that movement. While active, collaborative and group learning pedagogies are all key words in relation to these new spaces the concepts have always been central to laboratory based learning. The opportunity to build on and strengthen good practice in laboratories is immense. In the 2001 review “Universities in Crisis” many references are made to the decline of laboratories. One such comment in the review was made by Professor Ian Chubb (AVCC), who in 2013, as Chief Scientist for Australia, identifies the national concern about STEM education and presents a strategic plan to address the challenges ahead. What has been achieved and changed in engineering teaching and research laboratories in this time? PURPOSE OR GOAL A large number of universities in Australia and New Zealand own laboratory and other infrastructure designed well for the era they were built but now showing signs of their age, unable to meet the needs of today’s students, limiting the effectiveness of learning outcomes and presenting very low utilisation rates. This paper will present a model for new learning space design that improves student experience and engagement, supporting academic aims and significantly raising the space utilisation rate. APPROACH A new approach in laboratory teaching and research including new management has been adopted by the engineering disciplines at QUT. Flexibility is an underpinning principle along with the modularisation of fixed teaching and learning equipment, high utilisation of spaces and dynamic pedagogical approaches. The revitalised laboratories and workshop facilities are used primarily for the engineering disciplines and increasingly for integrated use across many disciplines in the STEM context. The new approach was built upon a base of an integrated faculty structure from 2005 and realised in 2010 as an associated development with the new Science and Engineering Centre (SEC). Evaluation through student feedback surveys for practical activities, utilisation rate statistics and uptake by academic and technical staff indicate a very positive outcome. DISCUSSION Resulting from this implementation has been increased satisfaction by students, creation of social learning and connecting space and an environment that meets the needs and challenges of active, collaborative and group learning pedagogies. Academic staff are supported, technical operations are efficient and laboratories are effectively utilised. RECOMMENDATIONS/IMPLICATIONS/CONCLUSION Future opportunities for continuous improvement are evident in using the student feedback to rectify faults and improve equipment, environment and process. The model is easily articulated and visible to other interested parties to contribute to sector wide development of learning spaces.

Random Breath Testing Operation and Effectiveness in 1985

Random breath testing (RBT) was introduced in South Australia in 1981 with the intention of reducing the incidence of accidents involving alcohol. In April 1985, a Select Committee of the Upper House which had been established to “review the operation of random breath testing in this State and any other associated matters and report accordingly” presented its report. After consideration of this report, the Government introduced extensive amendments to those sections of the Motor Vehicles Act (MVA) and Road Traffic Act (RTA) which deal with RBT and drink driving penalties. The amended section 47da of the RTA requires that: “(5) The Minister shall cause a report to be prepared within three months after the end of each calendar year on the operation and effectiveness of this section and related sections during that calendar year. (6) The Minister shall, within 12 sitting days after receipt of a report under subsection (5), cause copies of the report to be laid before each House of Parliament.” This is the first such report. Whilst it deals with RBT over a full year, the changed procedures and improved flexibility allowed by the revision to the RTA were only introduced late in 1985 and then only to the extent that the existing resources would allow.

Enabling people to ‘see what they can be’… The Community Aspirations Program (CAP-ED)

The Community Aspirations Program in Education (CAP-ED) was delivered by CQUniversity’s Office of Indigenous Engagement to increase Aboriginal and Torres Strait Islander student participation in higher education. CAP-ED was developed through scoping studies of six individual communities within the CQuniversity footprint, including a designated Aboriginal and Torres Strait Islander community and rural and regional communities. The scoping process included developing community profiles and extensive consultation with Traditional Owners, Elders, community members and key stakeholders. This process proved to be an essential component of CAP-ED’s success, resulting in Indigenous participation in the program’s networking lunches, through to the delivery of information and workshop sessions. Moreover, it witnessed engagement with people in communities as partners in the program’s delivery and co-presenters in workshops and other events. The CAP-ED workshops focus on identity, culture, aspirations and assist participants to see that they have the potential to participate in higher education. The other essential components of the program’s success have included enabling people to ‘see what they can be’, offering opportunities for people to ask questions, voice honest concerns, and build confidence. The flexibility of delivery was paramount in accommodating the varying needs of each community and the differences in cultural protocols and community approaches, while the face to face engagement between knowledgeable and skilled staff and community members proved to be vital. Over the life of the project, CAP-ED has developed into a broad based strategy that has successfully matched community needs and university based responses through the process of community engagement.

Post-deposition ageing reactions of plasma derived polyterpenol thin films

Owing to the structural flexibility, uncomplicated processing and manufacturing capabilities, plasma polymers are the subject of active academic as well as industrial research. Polymer thin films prepared from non-synthetic monomers combine desirable optical and physical properties with biocompatibility and environmental sustainability. However, the ultimate expediency and implementation of such materials will dependent on the stability of these properties under varied environmental conditions. Polyterpenol thin films were manufactured at different deposition powers. Under ambient conditions, the bulk of ageing occurred within first 150h after deposition and was attributed to oxidation and volumetric relaxation. Films observed for further 12 months showed no significant changes in thickness or refractive index. Thermal degradation behaviour indicated thermal stability increased for the films manufactured at higher RF powers. Annealing the films to 405°C resulted in full degradation, with retention between 0.29 and 0.99%, indicating films' potential as sacrificial material.