Optimising ketocarotenoid production in potato tubers : effect of genetic background, transgene combinations and environment

Astaxanthin is a high value carotenoid produced by some bacteria, a few green algae, several fungi but only a limited number of plants from the genus Adonis. Astaxanthin has been industrially exploited as a feed supplement in poultry farming and aquaculture. Consumption of ketocarotenoids, most notably astaxanthin, is also increasingly associated with a wide range of health benefits,as demonstrated in numerous clinical studies. Currently astaxanthin is produced commercially by chemical synthesis or from algal production systems. Several studies have used a metabolic engineering approach to produce astaxanthin in transgenic plants. Previous attempts to produce transgenic potato tubers biofortified with astaxanthin have met with limited success. In this study we have investigated approaches to optimising tuber astaxanthin content. It is demonstrated that the selection of appropriate parental genotype for transgenic approaches and stacking carotenoid biosynthetic pathway genes with the cauliflower Or gene result in enhanced astaxanthin content, to give six-fold higher tuber astaxanthin content than has been achieved previously. Additionally we demonstrate the effects of growth environment on tuber carotenoid content in both wild type and astaxanthin-producing transgenic lines and describe the associated transcriptome and metabolome restructuring.

Investigation into chemistry of new particle formation and growth in subtropical urban environment

The role of different chemical compounds, particularly organics, involved in the new particle formation (NPF) and its consequent growth are not fully understood. Therefore, this study was conducted to investigate the chemistry of aerosol particles during NPF events in an urban subtropical environment. Aerosol chemical composition was measured along with particle number size distribution (PNSD) and several other air quality parameters at five sites across an urban subtropical environment. An Aerodyne compact Time-of-Flight Aerosol Mass Spectrometer (c-TOF-AMS) and a TSI Scanning Mobility Particle Sizer (SMPS) measured aerosol chemical composition and PNSD, respectively. Five NPF events, with growth rates in the range 3.3-4.6 nm, were detected at two sites. The NPF events happened on relatively warmer days with lower humidity and higher solar radiation. Temporal percent fractions of nitrate, sulphate, ammonium and organics were modelled using the Generalised Additive Model (GAM), with a basis of penalised spline. Percent fractions of organics increased after the NPF events, while the mass fraction of ammonium and sulphate decreased. This uncovered the important role of organics in the growth of newly formed particles. Three organic markers, factors f43, f44 and f57, were calculated and the f44 vs f43 trends were compared between nucleation and non-nucleation days. f44 vs f43 followed a different pattern on nucleation days compared to non-nucleation days, whereby f43 decreased for vehicle emission generated particles, while both f44 and f43 decreased for NPF generated particles. It was found for the first time that vehicle generated and newly formed particles cluster in different locations on f44 vs f43 plot and this finding can be used as a tool for source apportionment of measured particles.

Detection of rain in acoustic recordings of the environment using machine learning techniques

This thesis is concerned with the detection and prediction of rain in environmental recordings using different machine learning algorithms. The results obtained in this research will help ecologists to efficiently analyse environmental data and monitor biodiversity.

Impact of agricultural chemicals on the environment and human health in Asia: Are there solutions?

Modern commercial agricultural practices in Asia during the last three to four decades involving chemicals (fertilisers and pesticides) have been associated with large increases in food production never witnessed before, especially under the Green Revolution technology in South Asia. This also involves large-scale increases in commercial vegetable crops. However, the high reliance on chemical inputs to bring about these increases in food production is not without problems. A visible, parallel correlation between higher productivity, high artificial input use and environmental degradation and human ill-health is evident in many countries where commercial agriculture is widespread. In this chapter, we focus on the impact of chemical inputs, in particular the impact of pesticides on the environment and on human health in South Asia with special reference to Sri Lanka...

Blended learning extension in a global collaborative learning environment

The advancement of technology and the internet have created global collaborative learning opportunities and changed learning and teaching in any discipline around the world, including in developing countries. The availability of web-based resources and high-speed internet infrastructure has extended the opportunities to conduct blended learning and new ways of distance learning beyond virtual class room webinars. The aim of this exploratory paper is to review the challenges and opportunities for increasing student engagement in virtual learning. A reflective analysis of international collaborative learning case studies, published articles and practices in virtual learning is used to explore the extension of blended learning organised and participated by institutions from multiple countries. The lessons learnt from flexible learning delivery in professional practice courses in Property Education are used to evaluate potential extensions of blended learning implementation in a global context.

Using a free online questionnaire to determine the skills, competencies and knowledge required to work in a digital library environment in Australia

This paper discusses the data collection technique used to determine the skills and knowledge required of academic librarians working in a digital library environment in Australia. The research was undertaken as part of the researcher’s master’s thesis conducted at Tallinn University. The data collection instrument used was a freely available online survey tool, and its advantages and disadvantages are discussed in terms of the desired outcomes and circumstances surrounding the thesis project. Decisions regarding the design of the questionnaire are also discussed.

Reflections and encounters: Exploring awareness in an academic environment

Earlier work within the CSCW community treated the notion of awareness as an important resource for supporting shared work and work-related activities. However, new trends have emerged in recent times that utilize the notion of awareness beyond work-related activities and explore social, emotional and interpersonal aspects of people’s everyday lives. To investigate this broader notion of awareness, we carried out a field study using ethnographic and cultural probe based methods in an academic setting. Our aim was to study staff members’ everyday activities in their natural surroundings; understand how awareness beyond work-related activities plays out and how it is dealt with. Our field study results shed light on two broad and sometimes overlapping themes of interaction between staff members: 1) self-representations and 2) casual encounters. We provide examples from the field illustrating these two themes. In general, our results show how awareness is closely associated with people’s everyday lives, where they creatively and artfully utilize ordinary resources from their environments to carry out their routine activities. Using the results of our field study, we describe the design of a situated display called Panorama that is meant to support non-critical, non-work-related awareness within work environments.

A technique for analysing GOOSE packets when testing relays in an IEC 61850-8-1 environment

While the implementation of the IEC 61850 standard has significantly enhanced the performance of communications in electrical substations, it has also increased the complexity of the system. Subsequently, these added elaborations have introduced new challenges in relation to the skills and tools required for the design, test and maintenance of 61850-compatible substations. This paper describes a practical experience of testing a protection relay using a non-conventional test equipment; in addition, it proposes a third party software technique to reveal the contents of the packets transferred on the substation network. Using this approach, the standard objects can be linked and interpreted to what the end-users normally see in the IED and test equipment proprietary software programs.

A homogeneous surface-enhanced Raman scattering platform for ultra-trace detection of trinitrotoluene in the environment

A facile and sensitive surface-enhanced Raman scattering substrate was prepared by controlled potentiostatic deposition of a closely packed single layer of gold nanostructures (AuNS) over a flat gold (pAu) platform. The nanometer scale inter-particle distance between the particles resulted in high population of ‘hot spots’ which enormously enhanced the scattered Raman photons. A renewed methodology was followed to precisely quantify the SERS substrate enhancement factor (SSEF) and it was estimated to be (2.2 ± 0.17) × 105. The reproducibility of the SERS signal acquired by the developed substrate was tested by establishing the relative standard deviation (RSD) of 150 repeated measurements from various locations on the substrate surface. A low RSD of 4.37 confirmed the homogeneity of the developed substrate. The sensitivity of pAu/AuNS was proven by determining 100 fM 2,4,6-trinitrotoluene (TNT) comfortably. As a proof of concept on the potential of the new pAu/AuNS substrate in field analysis, TNT in soil and water matrices was selectively detected after forming a Meisenheimer complex with cysteamine.

Environment, political economies and livelihood change

Between the national and household factors, community or “meso-level” changes in political economy and livelihoods in southwestern Bangladesh illustrate that in order to understand the impacts on people and nations of climate change-related environmental changes – changes that are expected to include rising sea level, saline inundation, and increased likelihood and intensity of cyclones in Bangladesh – we need to understand the dynamics of the built and natural environment and the political economies these sustain. Meso-level political economies affect the sources of income and livelihood available in distressed environmental conditions, and therefore influence how well the people in them can adapt to changing environmental conditions. In this study we have seen the underlying political economies whose dynamics, and not slow onset environmental changes or disastrous environmental events, are pushing Bangladeshis to incorporate migration strategies into their livelihood strategies.

Children's literature and the environment

Fiction offers creative and imaginative scenarios and solutions that may stimulate young people to consider their own relationship with the environment. Literature for young people also offers insights into ecocatastrophe, anthropocentrism, sustainability, and other important issues. A further significance of this project is that it aligns with the cross-curriculum priority of the Australian Curriculum, namely ‘sustainability’. The 'Children's Literature and the Environment' project in AustLit includes a variety of bibliographic records (fiction, information books, film, poetry, and multimedia) relevant to children and young adults that deal with the environment in imaginative, scientific, educational, and creative ways, which culminates in an online exhibition. There are a number of components clustered around key concepts and issues, such as sustainability, urban environments, and Indigenous perspectives. This exhibition allows researchers and students to access and engage with bibliographical data on a range of literary and critical texts that provide various environmental perspectives over a significant period of time.

Exposure to bioaerosols in the school environment in Brisbane, Australia

Introduction: Exposure to bioaerosols in indoor environments has been linked to various adverse health effects, such as airway disorders and upper respiratory tract symptoms. The aim of this study was to assess exposure to bioaerosols in the school environment in Brisbane, Australia. Methods: Culturable fungi and endotoxin measurements were conducted in six schools between October 2010 and May 2011. Culturable fungi (2 indoor air and 1-2 outdoor air samples per school) were assessed using a Biotest RCS High Flow Air Sampler, with a flow rate of either 50L/min or 20L/min. A rose pengar agar was used for recovery, which was incubated prior to counting and partial identification. Endotoxins were sampled (8h, 2L/min) using SKC glass fibre filters (4 indoor air samples per school) and analysed using an endpoint chromogenic LAL assay. Results: The arithmetic mean for fungi concentration in indoor and outdoor air was 710 cfu/m3(125- 1900 cfu/m3) and 524 cfu/m3 (140-1250 cfu/m3), respectively. The most frequently isolated fungal genus from the outdoor air was Cladosporium (over 40 %), followed by isolated Penicillium (21%) and Aspergillus (12%). The percent of Penicillium, Cladosporium and Aspergillus in indoor air samples was 32%, 32% and 8%, respectively. The aritmetic mean of endotoxin concentration was 0.59 EU/m3 (0-2,2 EU/m3). Discussion: The results of the current study are in agreement with previously reported studies, in that airborne fungi and endotoxin concentrations varied extensively, and were mostly dependent on climatic conditions. In addition, the indoor air mycoflora largely reflected the fungal flora present in the outdoor air, with Cladosporium being the most common in both outdoor and indoor (with Penicillium) air. In indoor air, unusually high endotoxin levels, over 1 EU/m3, were detected at 2 schools. Although these schools were not affected by the recent Brisbane floods, persistent rain prior to and during the study perios could explain the results.

A virtual environment for medical radiation collaborative learning

Asoftware-based environment was developed to provide practical training in medical radiation principles and safety. The Virtual Radiation Laboratory application allowed students to conduct virtual experiments using simulated diagnostic and radiotherapy X-ray generators. The experiments were designed to teach students about the inverse square law, half value layer and radiation protection measures and utilised genuine clinical and experimental data. Evaluation of the application was conducted in order to ascertain the impact of the software on students’ understanding, satisfaction and collaborative learning skills and also to determine potential further improvements to the software and guidelines for its continued use. Feedback was gathered via an anonymous online survey consisting of a mixture of Likert-style questions and short answer open questions. Student feedback was highly positive with 80 % of students reporting increased understanding of radiation protection principles. Furthermore 72 % enjoyed using the software and 87 %of students felt that the project facilitated collaboration within small groups. The main themes arising in the qualitative feedback comments related to efficiency and effectiveness of teaching, safety of environment, collaboration and realism. Staff and students both report gains in efficiency and effectiveness associated with the virtual experiments. In addition students particularly value the visualisation of ‘‘invisible’’ physical principles and increased opportunity for experimentation and collaborative problembased learning. Similar ventures will benefit from adopting an approach that allows for individual experimentation while visualizing challenging concepts.