Influence of traffic characteristics on polycyclic aromatic hydrocarbon build-up on urban road surfaces

Traffic is one of the prominent sources of polycyclic aromatic hydrocarbons (PAHs) and road surfaces are the most critical platform for stormwater pollution. Build-up of pollutants on road surfaces was the focus of this research study. The study found that PAHs build-up on road surfaces primarily originate from traffic activities, specifically gasoline powered vehicles. Other sources such as diesel vehicles, industrial oil combustion and incineration were also found to contribute to the PAH build-up. Additionally, the study explored the linkages between concentrations of PAHs and traffic characteristics such as traffic volume, vehicle mix and traffic flow. While traffic congestion was found to be positively correlated with 6- ring and 5- ring PAHs in road build-up, it was negatively correlated with 3-ring and 4 ring PAHs. The absence of positive correlation between 3-ring and 4-ring PAHs and traffic parameters is attributed to the propensity of these relatively volatile PAHs to undergo re-suspension and evaporation. The outcomes of this study are expected to contribute effective transport and land use planning for the prevention of PAH pollution in the urban environment.

Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying

Dried plant food products are increasing in demand in the consumer market, leading to continuing research to develop better products and processing techniques. Plant materials are porous structures, which undergo large deformations during drying. For any given food material, porosity and other cellular parameters have a direct influence on the level of shrinkage and deformation characteristics during drying, which involve complex mechanisms. In order to better understand such mechanisms and their interrelationships, numerical modelling can be used as a tool. In contrast to conventional grid-based modelling techniques, it is considered that meshfree methods may have a higher potential for modelling large deformations of multiphase problem domains. This work uses a meshfree based microscale plant tissue drying model, which was recently developed by the authors. Here, the effects of porosity have been newly accounted for in the model with the objective of studying porosity development during drying and its influence on shrinkage at the cellular level. For simplicity, only open pores are modelled and in order to investigate the influence of different cellular parameters, both apple and grape tissues were used in the study. The simulation results indicated that the porosity negatively influences shrinkage during drying and the porosity decreases as the moisture content reduces (when open pores are considered). Also, there is a clear difference in the deformations of cells, tissues and pores, which is mainly influenced by the cell wall contraction effects during drying.

The influence of abrasive pretreatment on hot air drying of grape

The drying of grapes is a more complex process compared to the dehydration of other agricultural materials due to the necessity of a pretreatment operation prior to drying. Grape drying to produce raisins is a very slow process, due to the peculiar structure of grape peel, that is covered by a waxy layer.Its removal has benn so far carried out by using several chemical pre-treatments. However, they cause heterogeneity in the waxes removal and create microscopic cracks. In this paper an abrasive pretreatment for enhancing the drying rate and preserving the grape samples is proposed. Two cultivars of grape were investigated: Regina white grape and Red Globe red grape. The drying kinetics of untreated and treated samples were studied using a convective oven at 50 C. Fruit quality parameters such as sugar and organic acid contents, shrinkage, texture, peel damage (i.e. by SEM analysis) and rehydration capacity were studied to evaluate the effectiveness of abrasive pretreatment on raisins. Abrasive pretreatment contributed to reduce drying time and rehydration time. The treated and untreated dried grapes were significantly different (p<0.05) in sugar and in tartaric acid content. On the contrary, no significant differences (p<0.05) in malic and citric acids in texture peoperties between untreated and treated samples were observed.

Mental health facility design: The case for person-centred care

There is a schism between a growing chorus for person-centred models of care and the prevalent paradigms for the design of mental health facilities. This argument proposes that architectural solutions have traditionally been geared around staff-centred concerns like ease of patient management. It suggests that the demands for person-centred models of care are important because evidence suggests that the physical environment is a causal factor in mental illness, and that even minor concessions towards person-centred models of care consistently exert a disproportionate and sustained positive influence on the behaviour of mental health patients. While the traditional mental health unit layout is unsatisfactory for person-centred care and effective recovery, other approaches that have been well tested and found to be effective is described along with a statement about subtle details that will improve facilities for all users.

Numerical investigation of case hardening of plant tissue during dying and its influence on the cellular level shrinkage

Dried plant food materials are one of the major contributors to the global food industry. Widening the fundamental understanding on different mechanisms of food material alterations during drying assists the development of novel dried food products and processing techniques. In this regard, case hardening is an important phenomenon, commonly observed during the drying processes of plant food materials, which significantly influences the product quality and process performance. In this work, a recent meshfree-based numerical model of the authors is further improved and used to simulate the influence of case hardening on shrinkage characteristics of plant tissues during drying. In order to model fluid and wall mechanisms in each cell, Smoothed Particle Hydrodynamics (SPH) and the Discrete Element Method (DEM) are used. The model is fundamentally more capable of simulating large deformation of multiphase materials, when compared with conventional grid-based modelling techniques such as Finite Element Methods (FEM) or Finite Difference Methods (FDM). Case hardening is implemented by maintaining distinct moisture levels in the different cell layers of a given tissue. In order to compare and investigate different factors influencing tissue deformations under case hardening, four different plant tissue varieties (apple, potato, carrot and grape) are studied. The simulation results indicate that the inner cells of any given tissue undergo limited shrinkage and cell wall wrinkling compared to the case hardened outer cell layers of the tissues. When comparing unique deformation characteristics of the different tissues, irrespective of the normalised moisture content, the cell size, cell fluid turgor pressure and cell wall characteristics influence the tissue response to case hardening.

Influence of the structural characteristic of pyrolysis products on thermal stability of styrene-butadiene rubber composites reinforced by different particle sized kaolinites

A series of rubber composites were prepared by blending styrene-butadiene rubber (SBR) latex and the different particle sized kaolinites. The thermal stabilities of the rubber composites were characterized using thermogravimetry, digital photography, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Kaolinite SBR composites showed much greater thermal stability when compared with that of the pure SBR. With the increase of kaolinite particle size, the pyrolysis products became much looser; the char layer and crystalline carbon content gradually decreased in the pyrolysis residues. The pyrolysis residues of the SBR composites filled with the different particle sized kaolinites showed some remarkable changes in structural characteristics. The increase of kaolinite particle size was not beneficial to form the compact and stable crystalline carbon in the pyrolysis process, and resulted in a negative influence in improving the thermal stability of kaolinite/SBR composites.

Morphogenetic analysis of architectural elements within the townscape

When a new form is inserted in an existing townscape, its consonance within the urban fabric is dependent on the level of attention paid to the evaluation and management of its architectural elements. However, despite the established principles and methods of urban morphology that enable the systematic analysis of the built environment, a formula for ensuring that new development relates to its context so as to achieve congruent outcomes is still lacking. This paper proposes a new method of evaluating and measuring architectural elements within evolving urban forms, with particular emphasis on a three-dimensional study of buildings. In a case study, detailed mapping of both current and past forms provides the basis for evincing predominant characteristics that have changed over time. Using this method, it is possible to demonstrate objectively how the townscape has been affected through changes in its architectural configuration.

Pilot study comparing the influence of different types of exercise intervention on the fear of falling in older adults

Background: Individuals who fear falling may restrict themselves from performing certain activities and may increase their risk of falling. Such fear, reflected in the form of falls efficacy, has been measured in only a small number of studies measuring the effectiveness of exercise interventions in the elderly. This may be due to the various types of exercise that can be performed. Hence the effectiveness of exercise on falls efficacy is relatively understudied. Therefore, there is a need to measure falls efficacy as an outcome variable when conducting exercise interventions in the elderly. Methods: A total of 43 elderly community-dwelling volunteers were recruited and randomly allocated to a conventional exercise intervention, a holistic exercise intervention, or a control group. The interventions were performed 2 days per week for 10 weeks. Falls efficacy was measured at baseline and at the completion of the interventions using the Modified Falls Efficacy Scale (MFES). Results: Within group comparisons between baseline and follow-up indicated no significant improvements in falls efficacy, however, the difference for the conventional exercise group approached statistical significance (baseline 8.9 to follow-up 9.3; P = 0.058). Within group comparisons of mean difference MFES scores showed a significant difference between the conventional exercise group and the control group (conventional exercise group 0.4 vs control group −0.6; P < 0.05). Conclusion: Given the lack of significant improvements in falls efficacy found for any of the groups, it cannot be concluded whether a conventional or a holistic exercise intervention is the best approach for improving falls efficacy. It is possible that the characteristics of the exercise interventions including specificity, intensity, frequency and duration need to be manipulated if the purpose is to bring about improvements in falls efficacy.

Influence of pollutant build-up on variability in wash-off from urban road surfaces

Variability in the pollutant wash-off process is a concept which needs to be understood in-depth in order to better assess the outcomes of stormwater quality models, and thereby strengthen stormwater pollution mitigation strategies. Current knowledge about the wash-off process does not extend to a clear understanding of the influence of the initially available pollutant build-up on the variability of the pollutant wash-off load and composition. Consequently, pollutant wash-off process variability is poorly characterised in stormwater quality models, which can result in inaccurate stormwater quality predictions. Mathematical simulation of particulate wash-off from three urban road surfaces confirmed that the wash-off load of particle size fractions <150µm and >150µm after a storm event vary with the build-up of the respective particle size fractions available at the beginning of the storm event. Furthermore, pollutant load and composition associated with the initially available build-up of <150µm particles predominantly influence the variability in washed-off pollutant load and composition. The influence of the build-up of pollutants associated with >150µm particles on wash-off process variability is significant only for relatively shorter duration storm events.

Attributions of responsibility, blame and justifiability to a perpetrator and victim in an acquaintance rape scenario: The influence of Marijuana intoxication

Marijuana is a commonly used illicit drug by young adults and has been implicated in about one third of sexual assaults. However, the influence of Marijuana intoxication on rape attributions has not been previously investigated. This study examined the effects of perpetrator and victim Marijuana intoxication and participant sex on rape attributions. Young adults (N = 285) read an acquaintance rape scenario where Marijuana intoxication was manipulated and completed measures of perpetrator (responsibility, blame and justifiability) and victim attributions (responsibility and blame). The results revealed that an intoxicated, compared to sober, perpetrator was attributed less responsibility for his sexual aggression. When the victim was intoxicated, compared to sober, the perpetrator and victim were attributed less and more blame for the assault, respectively. These findings demonstrate that, irrespective of perceiver sex, Marijuana intoxication, like alcohol intoxication, results in an attributional double standard in favour of the perpetrator.

The Wuzhen Theatre, Zhejiang, China: An architectural review

Designed by Taiwanese architect Kris Yao of Artech Architects for the Wuzhen Tourism Development Company, the Wuzhen Theatre is situated in Wuzhen, a historic scenic water town located in east China's Zhejiang Province. This theatre stands as an architectural beacon for Wuzhen, and is to be considered an important place on the global atlas of theatre and China's epicentre of theatre, culture and arts.

Influence of kaolinite particle size on cross-link density, microstructure and mechanical properties of latex blending styrene butadiene rubber composites

Cross-link density, microstructure and mechanical properties of styrene butadiene rubber (SBR) composites filled with different particle sized kaolinites are investigated. With the increase of kaolinite particle size, the cross-link density of the filled SBR composites, the dispersibility and orientation degree of kaolinite particles gradually decrease. Some big cracks in filled rubber composites are distributed along the fringe of kaolinite aggregates, and the absorbance of all the absorption bands of kaolinites gradually increase with the increase of kaolinite particle size. All mechanical property indexes of kaolinite filled SBR composites decrease due to the decrease of cross-linking and reduction of interface interaction between filler and rubber matrix.

The influence of organizational culture and climate on entrepreneurial intentions among research scientists

Over the past decades, universities have increasingly become involved in entrepreneurial activities. Despite efforts to embrace their ‘third mission’, universities still demonstrate great heterogeneity in terms of their involvement in academic entrepreneurship. This papers adopts an institutional perspective to understand how organizational characteristics affect research scientists’ entrepreneurial intentions. Specifically, we study the impact of university culture and climate on entrepreneurial intentions, including intentions to spin off a company, to engage in patenting or licensing and to interact with industry through contract research or consulting. Using a sample of 437 research scientists from Swedish and German universities, our results reveal that the extent to which universities articulate entrepreneurship as a fundamental element of their mission fosters research scientists’ intentions to engage in spin-off creation and intellectual property rights, but not industry-science interaction. Furthermore, the presence of university role models positively affects research scientists’ propensity to engage in entrepreneurial activities, both directly and indirectly through entrepreneurial self-efficacy. Finally, research scientists working at universities which explicitly reward people for ‘third mission’ related output show higher levels of spin-off and patenting or licensing intentions. This study has implications for both academics and practitioners, including university managers and policy makers.

External influence as an indicator of scholarly importance

Although the external influence of scholars has usually been approximated by publication and citation count, the array of scholarly activities is far more extensive. Today, new technologies, in particular Internet search engines, allow more accurate measurement of scholars' influence on societal discourse. Hence, in this article, we analyse the relation between the internal and external influence of 723 top economists using the number of pages indexed by Google and Bing as a measure of external influence. We not only identify a small association between these scholars’ internal and external influence but also a correlation between internal influence, as captured by receipt of such major academic awards as the Nobel Prize and John Bates Clark Medal, and the external prominence of the top 100 researchers (JEL Code: A11, A13, Z18).

The influence of financial risk tolerance and risk perception on individual investment decision-making in a financial advice context

The aim of this thesis is to examine how risk tolerance and risk perception, two important but often misunderstood constructs, jointly influence client investment decisions in a financial advice context. By distinguishing the roles of these two risk constructs in client decision-making, in this thesis a new direction in studying financial/investment risks is provided while practice and regulation in the financial services industry is potentially informed. Based on the literature relating to risks and individual decision-making, a theoretical framework is developed and relevant hypotheses are tested in two studies with financial adviser clients in Australia. Results reveal that financial risk tolerance influences asset allocation both directly and indirectly through risk perception. The intervening role of risk perception suggests that risk tolerance affects how clients perceive the riskiness of an investment product which influences client decision-making.