Mechanical and biological characterization of a porous poly-L-lactic acid-co-ε-caprolactone scaffold for tissue engineering

This article presents a method for making highly porous biodegradable scaffold that may ultimately be used for tissue engineering. Poly(L-lactic-co-1-caprolactone) acid (70:30) (PLCL) scaffold was produced using the solvent casting/leaching out method, which entails dissolving the polymer and adding a porogen that is then leached out by immersing the scaffold in distillated water. Tensile tests were performed for three types of scaffolds, namely pre-wetted, dried, and UV-irradiated scaffolds and their mechanical properties were measured. The prewetted PLCL scaffold possessed a modulus of elasticity 0.92+0.09 MPa, a tensile strength of 0.12+0.03 MPa and an ultimate strain of 23+5.3%. No significant differences in the modulus elasticity, tensile strength, nor ultimate strain were found between the pre-wetted, dried, and UV irradiated scaffolds. The PLCL scaffold was seeded by human fibroblasts in order to evaluate its biocompatibility by Alamar bluew assays. After 10 days of culture, the scaffolds showed good biocompatibility and allowed cell proliferation. However, the fibroblasts stayed essentially at the surface. This study shows the possibility to use the PLCL scaffold in dynamic mechanical conditions for tissue engineering

New media and the transformation of higher education

One set of public institutions that has seen growing discussion about the transformative impact of new media technologies has been universities. The higher education sector, historically one of the more venerable and stable areas of public life, is now the subject of almost continuous speculation about whether it can continue in its current form during the 21st century. Digital media technologies are often seen as being at the forefront of such changes. It has been widely noted that moves towards a knowledge economy generates ‘skills-biased technological change’, that places a premium upon higher education qualifications, and that this earnings gap remains despite the continuing increase in the number of university graduates. As the demand for higher education continues to grow worldwide, there are new discussions about whether technologically-mediated education through new forms such as Massively Open Online Courses (MOOCs) are broadening access to quality learning, or severing the vital connection between teacher and student seen as integral to the learning process. This paper critically appraises such debates in the context of early 21st century higher education. It will discuss ten drivers of change in higher education, many of which are related to themes discussed elsewhere in this book, such as the impact of social media, globalization, and a knowledge economy. It will also consider the issues raised in navigating such developments from the perspective of the ‘Five P’s’: practical issues; personal issues; pedagogical issues; policy issues; and philosophical issues. It also includes a critical evaluation of MOOCs from the point of view of their educational qualities. It will conclude with the observation that while universities will continue to play a significant – and perhaps growing – role in the economy, society and culture, the issues raised about what Clayton Christensen and Henry Eyring term the ‘disruptive university’ (Christensen and Eyring 2011) are nonetheless pressing ones, and that cost and policy pressures in particular are likely to generate significant institutional transformations in higher education worldwide.

Mixing higher education teaching and learning with mobile devices and social media

The use of mobile devices and social media technologies are becoming all-pervasive in society: they are both transformative and constant. The high levels of mobile device ownership and increased access to social media technologies enables the potential for ‘anytime, anywhere’ cooperation and collaboration in education. While recent reports into emerging technologies in higher education predict an increase in the use of mobile devices and social media technologies (Horizon Report, 2013), there is a lack of theory-based research to indicate how these technologies can be most effectively harnessed to support and enhance student learning and what the impacts of these technologies are on both students and educators. In response to the need to understand how these technologies can be better embraced within higher education, this study investigated how first year education students used mobile devices and social media technologies. More specifically, the study identified how students spent most of their time when connected online with mobile devices and social media technologies and whether the online connected time engaged them in their learning or whether it was a distraction.

Social Media in the Media: How Australian Media Perceive Social Media as Political Tools

Social media are becoming increasingly integrated into political practices around the world. Politicians, citizens and journalists employ new media tools to support and supplement their political goals. This report examines the way in which social media are portrayed as political tools in Australian mainstream media in order to establish what the relations are between social media and mainstream media in political news reporting. Through the close content-analysis of 93 articles sampled from the years 2008, 2010 and 2012, we provide a longitudinal insight into how the perception by Australian journalists and news media organisations of social media as political tools has changed over time. As the mainstream media remain crucial in framing the public understanding of new technologies and practices, this enhances our understanding of the positioning of social media tools for political communication.

Social media and its impact on crisis communication: Case studies of Twitter use in emergency management in Australia and New Zealand

There is a growing awareness worldwide of the significance of social media to communication in times of both natural and human-created disasters and crises. While the media have long been used as a means of broadcasting messages to communities in times of crisis – bushfires, floods, earthquakes etc. – the significance of social media in enabling many-to-many communication through ubiquitous networked computing and mobile media devices is becoming increasingly important in the fields of disaster and emergency management. This paper undertakes an analysis of the uses made of social media during two recent natural disasters: the January 2011 floods in Brisbane and South-East Queensland in Australia, and the February 2011 earthquake in Christchurch, New Zealand. It is part of a wider project being undertaken by a research team based at the Queensland University of Technology in Brisbane, Australia, that is working with the Queensland Department of Community Safety (DCS) and the EIDOS Institute, and funded by the Australian Research Council (ARC) through its Linkages program. The project combines large-scale, quantitative social media tracking and analysis techniques with qualitative cultural analysis of communication efforts by citizens and officials, to enable both emergency management authorities and news media organisations to develop, implement, and evaluate new social media strategies for emergency communication.

Convergent media policy : the Australian case

This chapter considers the implications of convergence for media policy from three perspectives. First, it discusses what have been the traditional concerns of media policy, and the challenges it faces, from the perspectives of public interest theories, economic capture theories, and capitalist state theories. Second, it looks at what media convergence involves, and some of the dilemmas arising from convergent media policy including: (1) determining who is a media company; (2) regulatory parity between ‘old’ and ‘new’ media; (3) treatment of similar media content across different platforms; (4) distinguishing ‘big media’ from user-created content, and: (5) maintaining a distinction between media regulation and censorship of personal communication. Finally, it discusses attempts to reform media policy in light of these changes, including Australian media policy reports from 2011-12 including the Convergence Review, the Finkelstein Review of News Media, and the Australian Law Reform Commission’s National Classification Scheme Review. It concludes by arguing that ‘public interest’ approaches to media policy continue to have validity, even as they grapple with the complex question of how to understand the concept of influence in a convergent media environment.

The democratisation of journalism practice for a politically informed citizenry : the capacities of new media to engage citizens in public life - a case study

This research investigates the extent to which the World Wide Web and the participatory news media culture have contributed to the democratisation of journalism since 1997. It examined the different ways in which public service and commercial news media models use digital platforms to fulfil their obligations as members of the Fourth Estate. The research found that the digital environment provides news organisations with greater scope for transparency, interactivity, collaboration and social networking compared to the traditional print and broadcast platforms.

Rapid synthesis of porous honeycomb Cu/Pd through a hydrogen-bubble templating method

A rapid electrochemical method based on using a clean hydrogen-bubble template to form a bimetallic porous honeycomb Cu/Pd structure has been investigated. The addition of palladium salt to a copper-plating bath under conditions of vigorous hydrogen evolution was found to influence the pore size and bulk concentration of copper and palladium in the honeycomb bimetallic structure. The surface was characterised by X-ray photoelectron spectroscopy, which revealed that the surface of honeycomb Cu/Pd was found to be rich with a Cu/Pd alloy. The inclusion of palladium in the bimetallic structure not only influenced the pore size, but also modified the dendritic nature of the internal wall structure of the parent copper material into small nanometre-sized crystallites. The chemical composition of the bimetallic structure and substantial morphology changes were found to significantly influence the surface-enhanced Raman spectroscopic response for immobilised rhodamine B and the hydrogen-evolution reaction. The ability to create free-standing films of this honeycomb material may also have many advantages in the areas of gas- and liquid-phase heterogeneous catalysis.

Formation of nanostructured porous Cu-Au surfaces : the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu–Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu2O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu–Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Electrochemical formation of porous copper 7, 7, 8, 8-tetracyanoquinodimethane and copper 2, 3, 5, 6-tetrafluoro-7, 7, 8, 8-tetracyanoquinodimethane honeycomb surfaces with superhydrophobic properties

The electrochemical formation of highly porous CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) and CuTCNQF4 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) materials was undertaken via the spontaneous redox reaction between a porous copper template, created using a hydrogen bubbling template technique, and an acetonitrile solution containing TCNQ or TCNQF4. It was found that activation of the surface via vigorous hydrogen evolution that occurs during porous copper deposition and TCNQ mass transport being hindered through the porous network of the copper template influenced the growth of CuTCNQ and CuTCNQF4. This approach resulted in the fabrication of a honeycomb layered type structure where the internal walls consist of very fine crystalline needles or spikes. This combination of microscopic and nanoscopic roughness was found to be extremely beneficial for anti-wetting properties where superhydrophobic materials with contact angles as high as 177° were created. Given that CuTCNQ and CuTCNQF4 have shown potential as molecular based electronic materials in the area of switching and field emission, the creation of a surface that is moisture resistant may be of applied interest.

Method for the production of porous complex metal oxides using a porogen

A method of producing porous complex oxides includes the steps of providing a mixt. of (a) precursor elements suitable to produce the complex oxide, or (b) one or more precursor elements suitable to produce particles of the complex oxide and one or more metal oxide particles; and (c) a particulate carbon-contg. pore-forming material selected to provide pore sizes in the range of 7-250 nm, and treating the mixt. to (i) form the porous complex oxide in which two or more of the precursor elements from (a) above or one or more of the precursor elements and one or more of the metals in the metal oxide particles from (b) above are incorporated into a phase of the complex metal oxide and the complex metal oxide has grain sizes in the range of 1-150 nm, and (ii) removing the pore-forming material under conditions such that the porous structure and compn. of the complex oxide is substantially preserved. The method may be used to produce nonrefractory metal oxides as well. The mixt. further includes a surfactant, or a polymer. [on SciFinder(R)]

Production of porous metal oxides

Porous complex oxides are produced by reacting metal oxide precursors in the presence of a pore-forming material to provide pore sizes in the range of 7-250 nm, followed by removal of the pore-forming material under conditions preserving the structure and compn. of the formed oxides. The pore-forming material are carbon black particles having a particle size of 10-100 nm. The carbon particles are removed from the formed oxide by heating at 100-300°. A surfactant can be added to the reaction mixt. [on SciFinder(R)]

Give some, get some: investigating the relationship between conspicuous donation behaviour on social media and customer value in a blood donation context

Previous research has questioned the role of altruism in charitable donation and suggests that such behaviour is also motivated by self-interest, such as public recognition or emotional satisfaction. Recognising this, not-for-profit organisations have developed strategies that allow individuals to donate conspicuously, and are at an embryonic stage of turning to social media to provide such recognition. Under investigation in this paper, is the relationship between conspicuous donation behaviour (CDB) on social media and customer value, in blood donation. Online survey results, from a sample of 186 Australian blood donors, support the proposed framework. Significant relationships between self-orientated CDB and emotional value, and other-orientated CDB and social value are demonstrated. The findings provide valuable insights into the use of conspicuous donation strategies on social media as a means to add value to the donation experience, and contribute to our understanding into the under-researched areas of CDB and customer value.

In-side-out : photojournalists from community and mainstream media organisations in Brazil's favelas

New media initiatives in Brazil's capital, Rio de Janeiro, are attempting to change mainstream ideas about favelas (poor districts) and their inhabitants. This thesis focuses on two of these initiatives that are being run by non-government organisations, Viva Favela and Imagens do Povo. This study takes an ethnographic and discursive approach to investigating and comparing two categories of professional photographers to determine how their working practices contribute to empowering the people living in Brazil's favelas. While mainstream photojournalists mainly cover human rights abuses in the favelas, community photographers challenge stereotypes by presenting images of the favelas' everyday life.