The continuing decline of science and mathematics enrolments in Australian high schools

Is there a crisis in Australian science and mathematics education? Declining enrolments in upper secondary Science and Mathematics courses have gained much attention from the media, politicians and high-profile scientists over the last few years, yet there is no consensus amongst stakeholders about either the nature or the magnitude of the changes. We have collected raw enrolment data from the education departments of each of the Australian states and territories from 1992 to 2012 and analysed the trends for Biology, Chemistry, Physics, two composite subject groups (Earth Sciences and Multidisciplinary Sciences), as well as entry, intermediate and advanced Mathematics. The results of these analyses are discussed in terms of participation rates, raw enrolments and gender balance. We have found that the total number of students in Year 12 increased by around 16% from 1992 to 2012 while the participation rates for most Science and Mathematics subjects, as a proportion of the total Year 12 cohort, fell (Biology (-10%), Chemistry (-5%), Physics (-7%), Multidisciplinary Science (-5%), intermediate Mathematics (-11%), advanced Mathematics (-7%) in the same period. There were increased participation rates in Earth Sciences (+0.3%) and entry Mathematics (+11%). In each case the greatest rates of change occurred prior to 2001 and have been slower and steadier since. We propose that the broadening of curriculum offerings, further driven by students' self-perception of ability and perceptions of subject difficulty and usefulness, are the most likely cause of the changes in participation. While these continuing declines may not amount to a crisis, there is undoubtedly serious cause for concern.

The rise and demise of the Inspector of Schools in Queensland

The colony of Queensland, established on 10 December 1859, passed its first Education Act in 1860. This enabled the government to provide for the education of all children from six to twelve years of age. The Board of General Education appointed its first Inspector of Schools in 1863, and he was followed by over 400 men — and later women — to inspect schools and teachers to guarantee conformity and efficiency. In 1875, education became a ministerial responsibility and the Department of Public Instruction was established. Teachers never seemed to enjoy a friendly working relationship with inspectors, and with the establishment of the Queensland Teachers Union, hostility increased. Eventually, in 1989, the Inspector of Schools position was abolished.

Effect of Coulomb blockade, gold resistance, and thermal expansion on the electrical resistance of ultrathin gold films

Controlling the electrical resistance of granular thin films is of great importance for many applications, yet a full understanding of electron transport in such films remains a major challenge. We have studied experimentally and by model calculations the temperature dependence of the electrical resistance of ultrathin gold films at temperatures between 2 K and 300 K. Using sputter deposition, the film morphology was varied from a discontinuous film of weakly coupled meandering islands to a continuous film of strongly coupled coalesced islands. In the weak-coupling regime, we compare the regular island array model, the cotunneling model, and the conduction percolation model with our experimental data. We show that the tunnel barriers and the Coulomb blockade energies are important at low temperatures and that the thermal expansion of the substrate and the island resistance affect the resistance at high temperatures. At low temperatures our experimental data show evidence for a transition from electron cotunneling to sequential tunneling but the data can also be interpreted in terms of conduction percolation. The resistivity and temperature coefficient of resistance of the meandering gold islands are found to resemble those of gold nanowires. We derive a simple expression for the temperature at which the resistance changes from non-metal-like behavior into metal-like behavior. In the case of strong island coupling, the total resistance is solely determined by the Ohmic island resistance.

Designing schools as effective 21st C learning spaces : a review

The Queensland Centre for Social Science Innovation was formed in 2012 to develop collaborations among the Queensland Government and five Queensland universities—The University of Queensland, Griffith University, Queensland University of Technology, James Cook University and Central Queensland University. Three priorities for initial projects were established by the Queensland Government with response by the participating universities. This project addressed the identified priority area: factors affecting educational achievement and investigation of the link between school design, refurbishment and educational outcomes. The proposal for this project indicated that a Review of research literature would be undertaken that linked school and classroom design with educational outcomes for learners in the 21st century. Further, research would be examined for impact of technology on staff and students, as well as learning spaces that addressed the diversity of student learners. Specific investigation of research on effective design to enhance learning outcomes for Aboriginal and Torres Strait Islander students was to be undertaken. The project therefore consists of a Review of research literature to provide an evidence base on the impact of school and classroom on educational outcomes. The original proposal indicated that indicators of successful school and classroom design would be student learning outcomes on a range of variables, with input, the specific architectural design elements. The review was undertaken during the period July 2012 to June 2013. A search was undertaken of journals, databases, and websources to identify relevant material. These were examined for evidence-based statements and design of learning spaces to enhance learning. The Review is comprehensive, and representative of issues raised in research, and conceptualisations and debates informing modern educational design. Initial findings indicated two key findings central to reading this Review. The first key finding is that the predominant focus of modern design of learning space is on process and the engagement of stakeholders. Schools are social institutions and development of a school as a learning space to suit 21st century learning needs necessarily involves the staff, students and other members of the community as key participants. The concept of social aspects of design is threaded throughout the Review. The second key finding is that little research explicitly examined the relationship between the design of learning spaces and educational outcomes. While some research does exist, the most explicitly-focused research uses narrow test-based achievement as the learning outcomes. These are not sympathetic to the overall framings of the research on 21st century learning, future schooling and the needs of the new generation of learners and society.

Braving a New World : Design Interventions for Changing Climates. Papers from the Subtropical Cities 2013 Fall Conference of the Association of Collegiate Schools of Architecture (ACSA)

We no longer have the luxury of time as the effects of climate change are being felt, according to the latest Intergovernmental Panel on Climate Change report, on every continent and in every ocean. More than 50% of the population of the United States and 85% of Australians live in coastal regions. The number of people living in the world’s coastal regions is expected to increase along with the need to improve capacity to mitigate hazards , and manage the multiple risks that have been identified by the scientific community. Under the auspices of the Association of Collegiate Schools of Architecture (ACSA) design academics and practitioners from the Americas, Asia, and Australia met in Fort Lauderdale, Florida for the fourth Subtropical Cities international conference to share outcomes of research and new pedagogies to address the critical transformation of the physical environments and infrastructures of the world’s vulnerable coastal communities. The theme of Subtropical Cities, adopted by the ACSA for its Fall 2014 Conference, is not confined entirely to a latitudinal or climatic frame of reference. The paper and project presentations addressed a range of theoretical, practice-led, and education-oriented research topics in architecture and urban design related to the subtropics, with emphasis on urban and coastal regions. More than half the papers originate from universities and practices in coastal regions. Threads emerged from a tapestry of localized investigations to reveal a more global understanding about possible futures we are designing for current and future generations. The one hundred-plus conference delegates and presenters represented 33 universities and institutions from across the United States, Mexico, Canada, Australia, the Middle East, Peru and China. Case studies from India, Morocco, Tahiti, Indonesia, Jordan, and Cambodia were also presented, expanding the global knowledge base. Co-authored submissions presented new directions for architecture and design, with a resounding theme of collaboration across diverse disciplines. The ability to deal with abstraction and complexity, and the capacity to develop synthesis and frameworks for defining problem boundaries can be considered key attributes of architectural thinking. Such a unique set of abilities can forge collaboration with different professional disciplines to achieve extraordinary outcomes. As the broad range of papers presented at this conference suggest, existing architectural and urban typologies and practices are increasingly considered part of the cause and not the solution to adapting to climate change and sea level rise. Design responses and the actions needed to generate new and unfamiliar forms of urbanism and infrastructure for defense, adaptation, and retreat in subtropical urban regions are being actively explored in academic design studios and research projects around the world. Many presentations propose provocative and experimental strategies as global climate moves beyond our “comfort zone”. The ideas presented at the Subtropical Cities conference are timely as options for low-energy passive climatic design are becoming increasingly limited in the context of changing climate. At the same time, ways of reducing or obsoleting energy intensive mechanical systems in densely populated urban centres present additional challenges for designers and communities as a whole. The conference was marked by a common theme of trans-disciplinary research, where design integration with emerging technologies resonate with a reaffirmation of the centrality of design thinking, expanding the scope of the traditional architecture studio pedagogy to integrate knowledge from other disciplines and the participation of diverse communities.

Withholding and withdrawing life-sustaining medical treatment

• At common law, a competent adult can refuse life-sustaining medical treatment, either contemporaneously or through an advance directive which will operate at a later time when the adult’s capacity is lost. • Legislation in most Australian jurisdictions also provides for a competent adult to complete an advance directive that refuses life-sustaining medical treatment. • At common law, a court exercising its parens patriae jurisdiction can consent to, or authorise, the withdrawal or withholding of life-sustaining medical treatment from an adult or child who lacks capacity if that is in the best interests of the person. A court may also declare that the withholding or withdrawal of treatment is lawful. • Guardianship legislation in all jurisdictions allows a substitute decision-maker, in an appropriate case, to refuse life-sustaining medical treatment for an adult who lacks capacity. • In terms of children, a parent may refuse life-sustaining medical treatment for his or her child if it is in the child’s best interests. • While a refusal of life-sustaining medical treatment by a competent child may be valid, this decision can be overturned by a court. • At common law and generally under guardianship statutes, demand for futile treatment need not be complied with by doctors.

A digital watermarking framework with application to medical image security

Dealing with digital medical images is raising many new security problems with legal and ethical complexities for local archiving and distant medical services. These include image retention and fraud, distrust and invasion of privacy. This project was a significant step forward in developing a complete framework for systematically designing, analyzing, and applying digital watermarking, with a particular focus on medical image security. A formal generic watermarking model, three new attack models, and an efficient watermarking technique for medical images were developed. These outcomes contribute to standardizing future research in formal modeling and complete security and computational analysis of watermarking schemes.

Beyond Wearables : Experiences and Trends in Design of Portable Medical Devices

The use of Portable Medical Devices (PMDs) has become increasingly widespread over the last few years. A combination of factors; including advances in technology, the pressure to reduce public health costs and the desire to make health solutions accessible to a wider patient base are contributing to the growth in the PMD market. Design has a clear role to play in the current and future context of the PMD landscape. In this paper, we identify emerging trends in the design of PMDs; including changes in the form, purpose and mode of use, and explore how these trends are likely to fundamentally impact the nature of healthcare and the patient experience from an experience design perspective. We conclude by identifying a research opportunity for design within the healthcare and PMD context.

Prediction of thermal expansion properties of carbon nanotubes using molecular dynamics simulations

The axial coefficients of thermal expansion (CTE) of various carbon nanotubes (CNTs), i.e., single-wall carbon nanotubes (SWCNTs), and some multi-wall carbon nanotubes (MWCNTs), were predicted using molecular dynamics (MDs) simulations. The effects of two parameters, i.e., temperature and the CNT diameter, on CTE were investigated extensively. For all SWCNTs and MWCNTs, the obtained results clearly revealed that within a wide low temperature range, their axial CTEs are negative. As the diameter of CNTs decreases, this temperature range for negative axial CTEs becomes narrow, and positive axial CTEs appear in high temperature range. It was found that the axial CTEs vary nonlinearly with the temperature, however, they decrease linearly as the CNT diameter increases. Moreover, within a wide temperature range, a set of empirical formulations was proposed for evaluating the axial CTEs of armchair and zigzag SWCNTs using the above two parameters. Finally, it was found that the absolute value of the negative axial CTE of any MWCNT is much smaller than those of its constituent SWCNTs, and the average value of the CTEs of its constituent SWCNTs. The present fundamental study is very important for understanding the thermal behaviors of CNTs in such as nanocomposite temperature sensors, or nanoelectronics devices using CNTs.

A case study of the Iranian national railway and its absolute capacity expansion using analytical models

Identifying railway capacity is an important task that can identify "in principal" whether the network can handle an intended traffic flow, and whether there is any free capacity left for additional train services. Capacity determination techniques can also be used to identify how best to improve an existing network, and at least cost. In this article an optimization approach has been applied to a case study of the Iran national railway, in order to identify its current capacity and to optimally expand it given a variety of technical conditions. This railway is very important in Iran and will be upgraded extensively in the coming years. Hence the conclusions in this article may help in that endeavor. A sensitivity analysis is recommended to evaluate a wider range of possible scenarios. Hence more useful lower and upper bounds can be provided for the performance of the system

Female genital cutting : An overview of Australian legal principles, ethical controversies, and medical, legal and social challenges

Female genital cutting (also often called female genital mutilation, or female circumcision) is a cultural practice that originated thousands of years ago. Female genital cutting has various forms, some of which are more invasive than others, but all of which produce health, legal and social consequences for those involved. Due to patterns of immigration in Australia, especially since the 1990s, there are women in Australia who have experienced female genital cutting. There may be some families, or some parents, who still hold a cultural commitment to female genital cutting. As a result, female genital cutting presents complex legal, ethical, medical and social challenges in contemporary Australian society. Medical practitioners and other health and welfare workers may encounter women who have experienced genital cutting and who require treatment for its sequelae. Currently, legislative frameworks for female genital cutting vary across states and territories, including the penalties for conducting it, and for removing a child for the purpose of conducting it outside Australia. This presentation provides an overview of the history, nature and consequences of the various forms of female genital cutting, and of the major Australian legal principles, ethical controversies, and medical, legal and social challenges in this field.

Doctors' knowledge of the law on withholding and withdrawing life-sustaining medical treatment

Objectives To examine the level of knowledge of doctors about the law on withholding and withdrawing life-sustaining treatment from adults who lack decision-making capacity, and factors associated with a higher level of knowledge. Design, setting and participants Postal survey of all specialists in emergency medicine, geriatric medicine, intensive care, medical oncology, palliative medicine, renal medicine and respiratory medicine on the AMPCo Direct database in New South Wales, Victoria and Queensland. Survey initially posted to participants on 18 July 2012 and closed on 31 January 2013. Main outcome measures Medical specialists’ levels of knowledge about the law, based on their responses to two survey questions. Results Overall response rate was 32%. For the seven statements contained in the two questions about the law, the mean knowledge score was 3.26 out of 7. State and specialty were the strongest predictors of legal knowledge. Conclusions Among doctors who practise in the end-of-life field, there are some significant knowledge gaps about the law on withholding and withdrawing life-sustaining treatment from adults who lack decision-making capacity. Significant consequences for both patients and doctors can flow from a failure to comply with the law. Steps should be taken to improve doctors’ legal knowledge in this area and to harmonise the law across Australia.

UNICEF, Jakarta, Indonesia : Review of Satap Schools

A. Background and context 1. Education, particularly basic education (grades1-9), has been considered critical to promoting national economic growth and social well being1. Three factors that con-tribute to the above are: (i) Education increases human capital inherent in a labor force and thus increases productivity. It also increases capacity for working with others and builds community consensus to support national development. (ii) Education can in-crease the innovative capacity of a community to support social and economic growth—use of new technologies, products and services to promote growth and wellbeing. (iii) Education can facilitate knowledge transfer needed to understand the social and eco-nomic innovations and new processes, practices and values. Cognizant of the above benefits of education, the Millennium Development Goals (MDG) and the Education for All (EFA) declarations advocating universal basic education were formulated and ratified by UN member countries. 2. Achieving universal primary education (grade 6) may not be sufficient to maxim-ize the above noted socio-economic and cultural benefits. There is general consensus that basic literacy and numeracy up to grade 9 are essential foundational blocks for any good education system to support national development. Basic Education provides an educational achievement threshold that ensures the learning is retained. To achieve this, the donor partner led interventions and the UN declarations such as the MDG goals have sought universal access to basic education (grades 1-9). As many countries progress towards achieving the universal access targets, recent research evidence suggests that we need more than just access to basic education to impact on the na-tional development. Measuring basic education completion cycle, gross enrolment rate (GER) and participation rate etc., has to now include a focus on quality and relevance of the education2. 3. While the above research finding is generally accepted by the Government of In-donesia (GoI), unlike many other developing countries, Indonesia is geographically and linguistically complex and has the fourth largest education sector in the world. It has over 3000 islands, 17,000 ethnic groups and it takes as long as 7 hours to travel from east to west of the country and has multiple time differences. The education system has six years of primary education (grades 1-6), 3 years of junior secondary education (grades 7-9) and three years of senior secondary education (grades 10-12). Therefore, applying the findings of the above cited research in a country like Indonesia is a chal-lenge. Nevertheless, since the adoption of the National Education Law (2003)3 the GoI has made significant progress in improving access to and quality of basic education (grades 1-9). The 2011/12 national education statistics show the primary education (grades 1-6) completion rate was 99.3%, the net enrolment rate (NER) was 95.4% and the GER was 115.4%. This is a significant achievement considering the complexities faced within Indonesia. This increase in the primary education sub-sector, however, has not flowed onto the Junior Secondary School (JSS) education. The transition from pri-mary to JSS is still short of the GoI targets. In 2012, there were 146,826 primary schools feeding into 33,668 junior secondary schools. The transition rate from primary to secondary in 2011/12 was 78%. When considering district or sub-district level data the transition in poor districts could be less than the aggregated national rate. Poverty and lack of parents’ education, confounded by opportunity cost, are major obstacles to transitioning to JSS4. 4. Table 1 presents a summary of GoI initiatives to accelerate the transition to JSS. GoI, with assistance from the donor community, has built 2465 new regular JSS, mak-ing the total number of regular JSS 33,668. In addition, 57,825 new classrooms have been added to existing regular JSS. Also, in rural and remote areas 4136 Satu-Atap5 (SATAP) schools were built to increase access to JSS. These SATAP schools are the focus of this study as they provide education opportunities to the most marginalized, ru-ral, remote children who otherwise would not have access to JSS and consequently not complete basic education.

Reflexive writers : re-thinking writing development and assessment in schools

Writing is a complex and highly individual activity, which is approached in different ways by different writers. Writers reflexively mediate subjective and objective conditions in specific and nuanced ways to produce a product in time and place. This paper uses a critical realist theory of reflexivity to argue that the teaching and assessment of writing must account for the different ways that students manage and make decisions in their writing. Data from linguistically and culturally diverse primary students in Australia are used to illustrate how four distinct reflexive modalities constitute the ways in which students approach writing. The paper offers a new approach to assessing writing for and of learning that considers writers as reflexive and agentic in different ways. It posits the importance of making visible and explicit the context and reflexive decision-making as writers shape a product for a purpose and audience.

The development and evaluation of a medical imaging training immersive environment

Introduction A novel realistic 3D virtual reality (VR) application has been developed to allow medical imaging students at Queensland University of Technology to practice radiographic techniques independently outside the usual radiography laboratory. Methods A flexible agile development methodology was used to create the software rapidly and effectively. A 3D gaming environment and realistic models were used to engender presence in the software while tutor-determined gold standards enabled students to compare their performance and learn in a problem-based learning pedagogy. Results Students reported high levels of satisfaction and perceived value and the software enabled up to 40 concurrent users to prepare for clinical practice. Student feedback also indicated that they found 3D to be of limited value in the desktop version compared to the usual 2D approach. A randomised comparison between groups receiving software-based and traditional practice measured performance in a formative role play with real equipment. The results of this work indicated superior performance with the equipment for the VR trained students (P = 0.0366) and confirmed the value of VR for enhancing 3D equipment-based problem-solving skills. Conclusions Students practising projection techniques virtually performed better at role play assessments than students practising in a traditional radiography laboratory only. The application particularly helped with 3D equipment configuration, suggesting that teaching 3D problem solving is an ideal use of such medical equipment simulators. Ongoing development work aims to establish the role of VR software in preparing students for clinical practice with a range of medical imaging equipment.