Compressive and shear force generated in the lumbar spine of female rowers

Rowers have and accrue greater lumbar spine bone mineral density (BMD) associated with mechanical loading produced during rowing. The aim of this study was to estimate the mechanical loading generated at the lumbar spine (LS) that is apparently providing an osteogenic benefit. The cohort comprised 14 female rowers (average age: 19.7yrs; height: 170.9 cm, weight: 59.5 kg) and 14 female matched controls (average age: 20.9 m yrs; height: 167.5 cm; weight: 58.1 kg). BMD was assessed using the Hologic QDR 2000+ bone densitometer, indicating higher lumbar spine BMD in the rowers compared to the control subjects (1,069 +/- 0.1 vs. 1,027 +/- 0.1 g/cm2). No significant difference existed for BMD at any other site. All rowers performed a six-minute simulated race on a Concept II rowing ergometer. Mechanical loading generated at the lumbar spine during this task was assessed using a two-dimensional model of the spine, enabling the calculation of the compressive and shear forces at L4/L5. The shear force was the joint reaction force perpendicular to the spine at the L4/L5 joint. Peak compressive and shear force at the lumbar spine of the rowers were 2,694 +/- 609 (N) and 660 +/- 117 (N), respectively. Peak compressive force at the LS relative to body weight was 4.6 times body weight. The literature would suggest that forces of this magnitude, generated at the LS during maximal rowing, may be contributing to the site specific higher LS BMD found in the rowers.

Local buckling studies of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential and commercial buildings as primary load bearing structural elements. They are often made of thin steel sheets and hence they are more susceptible to local buckling. The buckling behaviour of cold-formed steel compression members under fire conditions is not fully investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken to investigate the local buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. First a series of 91 local buckling tests was conducted at ambient and uniform elevated temperatures up to 700oC on cold-formed lipped and unlipped channels. Suitable finite element models were then developed to simulate the behaviour of tested columns and were validated using test results. All the ultimate load capacity results for local buckling were compared with the predictions from the available design rules based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Parts 1.2 and 1.3 and the direct strength method (DSM), based on which suitable recommendations have been made for the fire design of cold-formed steel compression members subject to local buckling at uniform elevated temperatures.

Projecting the new world city: The city as spectacle in an urban light festival

As a precursor to the 2014 G20 Leaders’ Summit held in Brisbane, Australia, the Queensland Government sponsored a program of G20 Cultural Celebrations, designed to showcase the Summit’s host city. The cultural program’s signature event was the Colour Me Brisbane festival, a two-week ‘citywide interactive light and projection installations’ festival that was originally slated to run from 24 October to 9 November, but which was extended due to popular demand to conclude with the G20 Summit itself on 16 November. The Colour Me Brisbane festival comprised a series projection displays that promoted visions of the city’s past, present, and future at landmark sites and iconic buildings throughout the city’s central business district and thus transformed key buildings into forms of media architecture. In some instances the media architecture installations were interactive, allowing the public to control aspects of the projections through a computer interface situated in front of the building; however, the majority of the installations were not interactive in this sense. The festival was supported by a website that included information regarding the different visual and interactive displays and links to social media to support public discussion regarding the festival (Queensland Government 2014). Festival-goers were also encouraged to follow a walking-tour map of the projection sites that would take them on a 2.5 kilometre walk from Brisbane’s cultural precinct, through the city centre, concluding at parliament house. In this paper, we investigate the Colour Me Brisbane festival and the broader G20 Cultural Celebrations as a form of strategic placemaking—designed, on the one hand, to promote Brisbane as a safe, open, and accessible city in line with the City Council’s plan to position Brisbane as a ‘New World City’ (Brisbane City Council 2014). On the other hand, it was deployed to counteract growing local concerns and tensions over the disruptive and politicised nature of the G20 Summit by engaging the public with the city prior to the heightened security and mobility restrictions of the Summit weekend. Harnessing perspectives from media architecture (Brynskov et al. 2013), urban imaginaries (Cinar & Bender 2007), and social media analysis, we take a critical approach to analysing the government-sponsored projections, which literally projected the city onto itself, and public responses to them via the official, and heavily promoted, social media hashtags (#colourmebrisbane and #g20cultural). Our critical framework extends the concepts of urban phantasmagoria and urban imaginaries into the emerging field of media architecture to scrutinise its potential for increased political and civic engagement. Walter Benjamin’s concept of phantasmagoria (Cohen 1989; Duarte, Firmino, & Crestani 2014) provides an understanding of urban space as spectacular projection, implicated in commodity and techno-culture. The concept of urban imaginaries (Cinar & Bender 2007; Kelley 2013)—that is, the ways in which citizens’ experiences of urban environments are transformed into symbolic representations through the use of imagination—similarly provides a useful framing device in thinking about the Colour Me Brisbane projections and their relation to the construction of place. Employing these critical frames enables us to examine the ways in which the installations open up the potential for multiple urban imaginaries—in the sense that they encourage civic engagement via a tangible and imaginative experience of urban space—while, at the same time, supporting a particular vision and way of experiencing the city, promoting a commodified, sanctioned form of urban imaginary. This paper aims to dissect the urban imaginaries intrinsic to the Colour Me Brisbane projections and to examine how those imaginaries were strategically deployed as place-making schemes that choreograph reflections about and engagement with the city.

Mechanical behavior of circular and square concrete filled steel tube stub columns under local compression

This paper presents a combined experimental and numerical study on the behaviour of both circular and square concrete-filled steel tube (CFT) stub columns under local compression. Twelve circular and eight square CFT stub columns were tested to study their bearing capacity and the key influential parameters. A 3D finite element model was established for simulation and parametric study to investigate the structural behaviour of the stub columns. The numerical results agreed well with the experimental results. In addition, analytical formulas were proposed to calculate the load bearing capacity of CFT stub columns under local compression.

Local Commons: A visual approach to collective city making through situated community engagement

Due to the numerous possibilities of voicing concerns and the flood of data we are exposed to, local issues are sometimes at risk of being overlooked. This study explores Local Commons, a design intervention in public space that combines situated digital and tangible media in order to engage communities in contributing and debating different perspectives on a given local issue. The intervention invited the community to submit images of their perspectives on the issue, which were displayed on a public screen. Via tangible buttons in front of the screen, community members then agree or disagree on the displayed perspectives, creating a space for deliberation. In a user study, we were specifically interested in testing three aspects of our intervention, which are discussed in this paper: The difference that situatedness, visual content, and tangible interaction can make to urban community engagement.

Postscript: Policy, Markets and the Local

A critical review and discussion of research studies of the impacts of market-based reforms on Chinese education, with a specific emphasis on local uptakes and effects of policy.

Infrastructure, investment and development evaluation: A Complex Stakeholder Perception Mapping approach for improving local and regional economic development outcomes

Partial evaluation of infrastructure investments have resulted in expensive mistakes, unsatisfactory outcomes and increased uncertainties for too many stakeholders, communities and economies in both developing and developed nations. "Complex Stakeholder Perception Mapping" (CSPM), is a novel approach that can address existing limitations by inclusively framing, capturing and mapping the spectrum of insights and perceptions using extended Geographic Information Systems. Maps generated in CSPM offer presentations of flexibly combined, complex perceptions of stakeholders on multiple aspects of development. CSPM extends the applications of GIS software in non-spatial mapping and of Multi-Criteria Analysis with a multidimensional evaluation platform and augments decision science capabilities in addressing complexities. Application of CSPM can improve local and regional economic gains from infrastructure projects and aid any multi-objective and multi-stakeholder decision situations.

It’s my site, and I’ll do what I want: Performing female identity through digital identity curation in online spaces

This chapter is based on a qualitative case study that researched the perceptions of nine male and female pre-service English teachers’ in regards to their preparedness to mentor positive digital conduct in Social network sites (SNS). These sites enable individuals to perform public representations of identity, consumed by virtual audiences, with various degrees of perceived privacy. The chapter frames what we call “identity curation” through three theoretical lenses; of performativity, customisation and critical literacy. This chapter discusses one of the themes that emerged from the research, which is the way in which “normalised” and naturalised representations of femineity on SNS were judged more harshly than masculine representations.

Practices to enhance peer program implementation integrity to safeguard peer leaders and learners

The powerful influence of peers on fellow students’ learning engagement and their ability to foster self-efficacy is well recognised. A positive learner mindset can be fostered through establishment of guided meaningful relationships formed between peers. Recognising the value of peer connections in shaping the student learning experience, peer programs have been widely adopted by universities as a mechanism to facilitate these connections. While potentially beneficial, a lack of knowledge and inexperience by program implementers can lead to program outcomes being compromised. To mitigate this risk, QUT has established university wide systems and benchmarks for enacting peer programs. These measures aim to promote program implementation integrity by supporting and developing the knowledge and capabilities of peer leaders and program coordinators. This paper describes a range of measures that have been instigated to optimise the quality of programs and ensure outcomes are mutually constructive and beneficial for all stakeholders.

The trajectory of minor stroke recovery for men and their female spousal caregivers: Literature review

Title The trajectory of minor stroke recovery for men and their female spousal caregivers: literature review Aim This paper is a report of a narrative review to examine the current state of knowledge regarding the impact of minor stroke on male patients and their female spousal caregivers’ recovery trajectory and quality of life. Background Minor stroke survivors are often discharged early in the recovery process. The perception of the healthcare community that these patients and their female spousal caregivers will experience an uneventful recovery may lead to inadequate preparation for the postdischarge period. Methods A range of databases was searched to identify papers addressing ‘minor stroke’, ‘transitions’, ‘quality of life’, ‘chronic disease’, ‘caregivers’ and ‘spouse caregivers’, including AARP Ageline, AMED, CINAHL, Evidence Based Medicine Reviews, MEDLINE and PsychInfo. Papers published in English from 1990 to December 2006 were included. Thirty-four papers were in the final data set. Results Minor stroke survivors and their female spousal caregivers may experience major challenges in adaptations postdischarge. The trajectory of minor stroke recovery may necessitate a re-evaluation of life plans, rethinking of priorities and integration of resulting disabilities into current and emerging life situations for both stroke survivors and their female spousal caregivers. In many cases these adaptations are compounded by transitions associated with the normal ageing process. Conclusion While there is extensive literature on stroke recovery and the role of caregivers in general, there is little available describing the recovery of minor stroke survivors in relation to the normal ageing process. Further research is needed examining recovery from a transitional perspective, to support nurses and other health professionals discharge planning.

A hybrid of modified PSO and local search on a multi-robot search system

Particle swarm optimization (PSO), a new population based algorithm, has recently been used on multi-robot systems. Although this algorithm is applied to solve many optimization problems as well as multi-robot systems, it has some drawbacks when it is applied on multi-robot search systems to find a target in a search space containing big static obstacles. One of these defects is premature convergence. This means that one of the properties of basic PSO is that when particles are spread in a search space, as time increases they tend to converge in a small area. This shortcoming is also evident on a multi-robot search system, particularly when there are big static obstacles in the search space that prevent the robots from finding the target easily; therefore, as time increases, based on this property they converge to a small area that may not contain the target and become entrapped in that area.Another shortcoming is that basic PSO cannot guarantee the global convergence of the algorithm. In other words, initially particles explore different areas, but in some cases they are not good at exploiting promising areas, which will increase the search time.This study proposes a method based on the particle swarm optimization (PSO) technique on a multi-robot system to find a target in a search space containing big static obstacles. This method is not only able to overcome the premature convergence problem but also establishes an efficient balance between exploration and exploitation and guarantees global convergence, reducing the search time by combining with a local search method, such as A-star.To validate the effectiveness and usefulness of algorithms,a simulation environment has been developed for conducting simulation-based experiments in different scenarios and for reporting experimental results. These experimental results have demonstrated that the proposed method is able to overcome the premature convergence problem and guarantee global convergence.

Drivers of local food consumption: A comparative study

Purpose The aim of this paper is to empirically explore antecedents of local food purchase intention in two food producing countries with different cultural backgrounds. Design/methodology/approach An online survey was employed to collect data from consumers located in Chile (n=283) and Australia (n=300). A proposed model is tested with structural equation modelling (SEM). Findings Attitude towards consuming local food is a strong and direct driver of intentions to purchase local food in both countries. Attitude toward supporting local agri-businesses and consumer ethnocentrism are found to positively impact attitude towards consuming local food in both countries. Attitude towards local agri-businesses also has a direct effect on intentions to purchase local food in Australia, but not in Chile. Interestingly, subjective norms are not found to affect intentions to consume local food in either country. Research limitations/implications The paper examines factors affecting the attitude toward and behavioural intention regarding local food consumption and develops an extended model of local food consumption. An outcome of this new model is the inclusion of personal variables, which influence local food purchasing behaviour. Practical implications Producers and retailers need to develop campaigns explaining how consuming local food supports local businesses and farmers, which will reinforce personal values associated with local consumption. Originality/value This is the first study to demonstrate that positive attitudes toward local foods are important drivers of local food purchase behaviour, independent of the cultural characteristics or level of economic development within a country.

A social licence to operate: Corporate social responsibility, local communities and the constitution of global production networks

This article contributes to the theorization of the role of informal regulation (undertaken by leading firms) in the ongoing organization of global production networks. It does so through a qualitative case study of BHP Billiton's Ravensthorpe Nickel Operation (RNO) in the rural Shire of Ravensthorpe in Western Australia. This less tangible, and to date under-researched, dimension of global production networks is foregrounded through a focus on the corporate social responsibility strategy implemented by RNO in the service of achieving and/or demonstrating a broader ‘social licence to operate’. This ‘licence’ functions – beyond the corporation – as a legitimated and legitimating multi-scalar mechanism through which to gain and maintain access to mineral resources and thus to establish viable and ongoing global production networks. Further, this informal regulation is shown to shape social relations and qualities of place conducive to competitive global mineral extraction and to facilitate the positioning of local communities and places in mineral global production networks.

Local experiences, global similarities: Teacher perceptions of the impacts of national testing

Since 2008, Australian schoolchildren in Years 3, 5, 7 and 9 have sat a series of tests each May designed to assess their attainment of basic skills in literacy and numeracy. These tests are known as the National Assessment Program – Literacy and Numeracy (NAPLAN). In 2010, individual school NAPLAN data were first published on the MySchool website which enables comparisons to be made between individual schools and statistically like schools across Australia. NAPLAN represents the increased centrality of the federal government in education, particularly in regards to education policy. One effect of this has been a recast emphasis of education as an economic, rather than democratic, good. As Reid (2009) suggests, this recasting of education within national productivity agendas mobilises commonsense discourses of accountability and transparency. These are common articles of faith for many involved in education administration and bureaucracy; more and better data, and holding people to account for that data, must improve education...

Anthropogenic nitrogen deposition predicts local grassland primary production worldwide

Humans dominate many important Earth system processes including the nitrogen (N) cycle. Atmospheric N deposition affects fundamental processes such as carbon cycling, climate regulation, and biodiversity, and could result in changes to fundamental Earth system processes such as primary production. Both modelling and experimentation have suggested a role for anthropogenically altered N deposition in increasing productivity, nevertheless, current understanding of the relative strength of N deposition with respect to other controls on production such as edaphic conditions and climate is limited. Here we use an international multiscale data set to show that atmospheric N deposition is positively correlated to aboveground net primary production (ANPP) observed at the 1-m2 level across a wide range of herbaceous ecosystems. N deposition was a better predictor than climatic drivers and local soil conditions, explaining 16% of observed variation in ANPP globally with an increase of 1 kg N·ha-1·yr-1 increasing ANPP by 3%. Soil pH explained 8% of observed variation in ANPP while climatic drivers showed no significant relationship. Our results illustrate that the incorporation of global N deposition patterns in Earth system models are likely to substantially improve estimates of primary production in herbaceous systems. In herbaceous systems across the world, humans appear to be partially driving local ANPP through impacts on the N cycle.