Development of a performance model for international construction joint venture : a system dynamics approach

The uncertain and dynamic nature of International Construction Joint Venture (ICJV) performance is evolved with many critical factors which lead to make partner relationships more complex in respect of making decisions to maintain a cohesive environment. Addressing to the fact, a generic system dynamics performance model for ICJV is developed by integrating a number variables as to get an overall impact on performance of ICJV and to make effective decisions based on that. In order to formulate and validate the model both structurally and behaviourally, both qualitative and quantitative data are gathered by conducting intensive interviews from two ICJVs in Thailand. After conducting intensive simulations of model, three major problems are identified related to negative value gap, low productivity in construction and high rate of ineffective information sharing of both ICJVs. Several policies are suggested and integrated application of these policies provides a maximum improvement to performance of the ICJV.

Development of an autonomous unmanned aerial system to collect time-stamped samples from the atmosphere and localize potential pathogen sources

This paper presents the hardware development and testing of a new concept for air sampling via the integration of a prototype spore trap onboard an unmanned aerial system (UAS).We propose the integration of a prototype spore trap onboard a UAS to allow multiple capture of spores of pathogens in single remote locations at high or low altitude, otherwise not possible with stationary sampling devices.We also demonstrate the capability of this system for the capture of multiple time-stamped samples during a single mission.Wind tunnel testing was followed by simulation, and flight testing was conducted to measure and quantify the spread during simulated airborne air sampling operations. During autonomous operations, the onboard autopilot commands the servo to rotate the sampling device to a new indexed location once the UAS vehicle reaches the predefined waypoint or set of waypoints (which represents the region of interest). Time-stamped UAS data are continuously logged during the flight to assist with analysis of the particles collected. Testing and validation of the autopilot and spore trap integration, functionality, and performance is described. These tools may enhance the ability to detect new incursions of spores

The development of a program to assist international nursing students to be prepared for clinical practice in the Australian health care context

Health education in Western Countries has grown considerably in the last decade and this has occurred for a number of reasons. Specifically Universities actively recruit International students as the health workforce becomes global; also it is much easier for students to move and study globally. Internationally there is a health workforce shortage and if students gain a degree in a reputable university their ability to work globally is improved significantly. However, when studying to practice in the health care field the student must undertake clinical practice in an acute or aged care setting. This can be a significant problem for students who are culturally and linguistically diverse in an English speaking country such as Australia. The issues that can arise stem from the language differences where communication, interpretation understanding and reading the cultural norms of the health care setting are major challenges for International students. To assist international students to be successful in their clinical education, an extra curriculum workshop program was developed to provide additional support. The program which runs twice each year includes on-campus interactive workshops that are complemented by targeted support provided for students and clinical staff who are supervising students’ practice experience in the workplace. As this is an English speaking country the workshop is based on practicing reading, writing, listening and speaking, as well as exploring basic health care concepts and cultural differences. This enables students to gain knowledge of and practice interpretation of cultural norms and expectations in a safe environment. This innovative series of interactive workshops in a highly student-centred learning environment combine education with role play and discussion with peers who are supported by culturally aware and competent Educators. Over the years it has been running, the program has been undertaken by an increasing number of students. In 2011, more than 100 students are expected to participate. Student evaluation of the program has confirmed that it has assisted the majority of them to be successful in their clinical studies. Effectiveness of the project is measured throughout the program and in follow up sessions. This ongoing information allows for continuous development of the program that serves to meet individual needs of the International student, the University and Service providers such as the hospitals. This feedback from students regarding their increased comprehension of the Australian colloquial Language, healthcare terminology, critical thinking and clinical skill development and a cultural awareness also enables them to maintain their feelings of self confidence and self esteem.

Palliative care, double effect and the law in Australia

Care and decision-making at the end of life that promotes comfort and dignity is widely endorsed by public policy and the law. In ethical analysis of palliative care interventions that are argued potentially to hasten death, these may be deemed to be ethically permissible by the application of the doctrine of double effect, if the doctor’s intention is to relieve pain and not cause death. In part because of the significance of ethics in the development of law in the medical sphere, this doctrine is also likely to be recognized as part of Australia’s common law, although hitherto there have been no cases concerning palliative care brought before a court in Australia to test this. Three Australian States have, nonetheless, created legislative defences that are different from the common law with the intent of clarifying the law, promoting palliative care, and distinguishing it from euthanasia. However, these defences have the potential to provide less protection for doctors administering palliative care. In addition to requiring a doctor to have an appropriate intent, the defences insist on adherence to particular medical practice standards and perhaps require patient consent. Doctors providing end-of-life care in these States need to be aware of these legislative changes. Acting in accordance with the common law doctrine of double effect may not provide legal protection. Similar changes are likely to occur in other States and Territories as there is a trend towards enacting legislative defences that deal with the provision of palliative care.

Quantification of particle emission characteristics and development of an emission model for use in transport microenvironments affected by traffic emissions

Vehicle emitted particles are of significant concern based on their potential to influence local air quality and human health. Transport microenvironments usually contain higher vehicle emission concentrations compared to other environments, and people spend a substantial amount of time in these microenvironments when commuting. Currently there is limited scientific knowledge on particle concentration, passenger exposure and the distribution of vehicle emissions in transport microenvironments, partially due to the fact that the instrumentation required to conduct such measurements is not available in many research centres. Information on passenger waiting time and location in such microenvironments has also not been investigated, which makes it difficult to evaluate a passenger’s spatial-temporal exposure to vehicle emissions. Furthermore, current emission models are incapable of rapidly predicting emission distribution, given the complexity of variations in emission rates that result from changes in driving conditions, as well as the time spent in driving condition within the transport microenvironment. In order to address these scientific gaps in knowledge, this work conducted, for the first time, a comprehensive statistical analysis of experimental data, along with multi-parameter assessment, exposure evaluation and comparison, and emission model development and application, in relation to traffic interrupted transport microenvironments. The work aimed to quantify and characterise particle emissions and human exposure in the transport microenvironments, with bus stations and a pedestrian crossing identified as suitable research locations representing a typical transport microenvironment. Firstly, two bus stations in Brisbane, Australia, with different designs, were selected to conduct measurements of particle number size distributions, particle number and PM2.5 concentrations during two different seasons. Simultaneous traffic and meteorological parameters were also monitored, aiming to quantify particle characteristics and investigate the impact of bus flow rate, station design and meteorological conditions on particle characteristics at stations. The results showed higher concentrations of PN20-30 at the station situated in an open area (open station), which is likely to be attributed to the lower average daily temperature compared to the station with a canyon structure (canyon station). During precipitation events, it was found that particle number concentration in the size range 25-250 nm decreased greatly, and that the average daily reduction in PM2.5 concentration on rainy days compared to fine days was 44.2 % and 22.6 % at the open and canyon station, respectively. The effect of ambient wind speeds on particle number concentrations was also examined, and no relationship was found between particle number concentration and wind speed for the entire measurement period. In addition, 33 pairs of average half-hourly PN7-3000 concentrations were calculated and identified at the two stations, during the same time of a day, and with the same ambient wind speeds and precipitation conditions. The results of a paired t-test showed that the average half-hourly PN7-3000 concentrations at the two stations were not significantly different at the 5% confidence level (t = 0.06, p = 0.96), which indicates that the different station designs were not a crucial factor for influencing PN7-3000 concentrations. A further assessment of passenger exposure to bus emissions on a platform was evaluated at another bus station in Brisbane, Australia. The sampling was conducted over seven weekdays to investigate spatial-temporal variations in size-fractionated particle number and PM2.5 concentrations, as well as human exposure on the platform. For the whole day, the average PN13-800 concentration was 1.3 x 104 and 1.0 x 104 particle/cm3 at the centre and end of the platform, respectively, of which PN50-100 accounted for the largest proportion to the total count. Furthermore, the contribution of exposure at the bus station to the overall daily exposure was assessed using two assumed scenarios of a school student and an office worker. It was found that, although the daily time fraction (the percentage of time spend at a location in a whole day) at the station was only 0.8 %, the daily exposure fractions (the percentage of exposures at a location accounting for the daily exposure) at the station were 2.7% and 2.8 % for exposure to PN13-800 and 2.7% and 3.5% for exposure to PM2.5 for the school student and the office worker, respectively. A new parameter, “exposure intensity” (the ratio of daily exposure fraction and the daily time fraction) was also defined and calculated at the station, with values of 3.3 and 3.4 for exposure to PN13-880, and 3.3 and 4.2 for exposure to PM2.5, for the school student and the office worker, respectively. In order to quantify the enhanced emissions at critical locations and define the emission distribution in further dispersion models for traffic interrupted transport microenvironments, a composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. This model does not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bidirectional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. The CLSE model was also applied at a signalled pedestrian crossing, in order to assess increased particle number emissions from motor vehicles when forced to stop and accelerate from rest. The CLSE model was used to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses including 1 car travelling in 1 direction (/1 direction), 14 cars / 1 direction, 1 bus / 1 direction, 28 cars / 2 directions, 24 cars and 2 buses / 2 directions, and 20 cars and 4 buses / 2 directions. It was found that the total emissions produced during stopping on a red signal were significantly higher than when the traffic moved at a steady speed. Overall, total emissions due to the interruption of the traffic increased by a factor of 13, 11, 45, 11, 41, and 43 for the above 6 cases, respectively. In summary, this PhD thesis presents the results of a comprehensive study on particle number and mass concentration, together with particle size distribution, in a bus station transport microenvironment, influenced by bus flow rates, meteorological conditions and station design. Passenger spatial-temporal exposure to bus emitted particles was also assessed according to waiting time and location along the platform, as well as the contribution of exposure at the bus station to overall daily exposure. Due to the complexity of the interrupted traffic flow within the transport microenvironments, a unique CLSE model was also developed, which is capable of quantifying emission levels at critical locations within the transport microenvironment, for the purpose of evaluating passenger exposure and conducting simulations of vehicle emission dispersion. The application of the CLSE model at a pedestrian crossing also proved its applicability and simplicity for use in a real-world transport microenvironment.

The development of Monte Carlo techniques for the verification of radiotherapy treatments

Radiotherapy is a cancer treatment modality in which a dose of ionising radiation is delivered to a tumour. The accurate calculation of the dose to the patient is very important in the design of an effective therapeutic strategy. This study aimed to systematically examine the accuracy of the radiotherapy dose calculations performed by clinical treatment planning systems by comparison againstMonte Carlo simulations of the treatment delivery. A suite of software tools known as MCDTK (Monte Carlo DICOM ToolKit) was developed for this purpose, and is capable of: • Importing DICOM-format radiotherapy treatment plans and producing Monte Carlo simulation input files (allowing simple simulation of complex treatments), and calibrating the results; • Analysing the predicted doses of and deviations between the Monte Carlo simulation results and treatment planning system calculations in regions of interest (tumours and organs-at-risk) and generating dose-volume histograms, so that conformity with dose prescriptions can be evaluated. The code has been tested against various treatment planning systems, linear acceleratormodels and treatment complexities. Six clinical head and neck cancer treatments were simulated and the results analysed using this software. The deviations were greatest where the treatment volume encompassed tissues on both sides of an air cavity. This was likely due to the method the planning system used to model low density media.

Knowledge-based urban development redefined : from theory to practice knowledge-based development of cities

The concept of knowledge-based urban development has first come to the urban planning and development agenda during the very last years of the 20th century as a promising paradigm to support the transformation process of cities into knowledge cities and their societies into knowledge societies. However, soon after the exponentially rapid advancements experienced, during the first decade of the 21st century, particularly, in the domains of economy, society, management and technology along with the severe impacts of climate change, have made the redefinition of the term a necessity. This paper, first, reports the findings of the review of the relatively short but dynamic history of urbanisation experiences of our cities around the globe. The paper, then, focuses on the 21st century urbanisation context and discusses the conceptual base of the knowledge-based development of cities and how this concept found application ground in many parts of the world. Following this, the paper speculates development of future cities by particularly highlighting potential challenges and opportunities that previously have not been fully considered. This paper, lastly, introduces and elaborates how relevant theories support the better conceptualisation of this relatively new, but rapidly emerging paradigm, and redefines it accordingly.

A way forward to managing the transition to professional practice for beginning teachers

The high attrition rate of beginning teachers in Australia and overseas is well-documented. This trend is easily understood as many beginning teachers enter the profession with little support or mentoring (Department of Education, Science and Training (DEST), 2002; Herrington & Herrington, 2004; Ramsey, 2000). Continual calls for more comprehensive approaches to teacher induction in which universities and employing bodies share the responsibilities of the transition to professional practice (House of Representatives Standing Committee on Education and Vocational Training, 2007) have, to date, largely been ignored. This paper reports on a trial project conducted at a university in south-east Queensland, Australia that addresses these shortfalls. The aim of the project is to facilitate and support the development of high quality teachers and teaching through an extended model of teacher preparation. The model comprises a 1+2 program of formal teacher preparation: a one-year teacher education course (the Graduate Diploma in Education), followed by a comprehensive two year program of workplace induction and ongoing professional learning tailored to meet graduate and employer needs. This paper reports on graduating students’ perceptions of their preparedness to teach as they transition from the Graduate Diploma in Education program to professional practice. The study concludes that innovative programs, including university-linked, ongoing professional learning support for teacher education graduates, may provide the way forward for enhancing the transition to practice for beginning teachers.

A design approach to teaching new product development

The educational unit new product development, taught within the industrial design program at the Queensland University of Technology (QUT) introduces the relationship between product design and commercialisation to third year industrial design undergraduate students. In which, they are exposed for the first time to product strategy development aimed at meeting consumer expectations, whilst at the same time achieving corporate objectives. Delivered content such as intellectual property, market opportunities, competitor analysis and investor requirements are taught within the thirteen week semester timeframe. New product development theory is not a new field. However, the design approach to teaching this theory and more importantly how designers can use it in the design process is novel. This paper provides an overview of the curriculum design of this unit as well as its incremental development over the past four year duration period. Student project outcomes and more importantly the process and tools from this unit are also discussed and presented.

Substance-related expectancies among men who have sex with men : development of psychometric tools to predict unprotected sexual activity

Significant research has demonstrated direct and indirect associations between substance use and sexual behaviour. Substance use is related to sexual risk-taking and HIV seroconversion among some substance-using MSM. It remains unclear what factors mediate or underlie this relationship, and which substances are associated with greater harm. Substance-related expectancies are hypothesised as potential mechanisms. A conceptual model based on social-cognitive theory was tested, which explores the role of demographic factors, substance use, substance-related expectancies and novelty-seeking personality characteristics in predicting unprotected anal intercourse (UAI) while under the influence, across four commonly used substance types. Phase 1, a qualitative study (N = 20), explored how MSM perceive the effects of substance use on their thoughts, feelings and behaviours, including sexual behaviours. Information was attained through discussion and interviews, resulting in the establishment of key themes. Results indicated MSM experience a wide range of reinforcing aspects associated with substance use. General and specific effects were evident across substance types, and were associated with sexual behaviour and sexual risk-taking. Phase 2 consisted of developing a comprehensive profile of substance-related expectancies for MSM (SEP-MSM) regarding alcohol, cannabis, amyl nitrite and stimulants that possessed sound psychometric properties and was appropriate for use among this group. A cross-sectional questionnaire with 249 participants recruited through gay community networks was used to validate these measures, and involved online data collection, participants rating expectancy items and subsequent factor analysis. Results indicated expectancies can be reliably assessed, and predicted substance use patterns. Phase 3 examined demographic factors, substance use, substance-related expectancies, and novelty-seeking traits among another community sample of MSM (N = 277) throughout Australia, in predicting UAI while under the influence. Using a cross-sectional design, participants were recruited through gay community networks and completed online questionnaires. The SEP-MSM, and associated substance use, predicted UAI. This research extends social-cognitive theory regarding sexual behaviour, and advances understanding of the role of expectancies associated with substance use and sexual risk-taking. Future applications of the SEP-MSM in health promotion, prevention, clinical interventions and research are likely to contribute to reducing harm associated with substance-using MSM (e.g., HIV transmission).

A way forward to managing the transition to professional practice for beginning teachers

The high attrition rate of beginning teachers in Australia and overseas is well-documented. This trend is easily understood as many beginning teachers enter the profession with little support or mentoring (Department of Education, Science and Training (DEST), 2002; Herrington & Herrington, 2004; Ramsey, 2000). Continual calls for more comprehensive approaches to teacher induction in which universities and employing bodies share the responsibilities of the transition to professional practice (House of Representatives Standing Committee on Education and Vocational Training, 2007) have, to date, largely been ignored. This paper reports on a trial project conducted at a university in south-east Queensland, Australia that addresses these shortfalls. The aim of the project is to facilitate and support the development of high quality teachers and teaching through an extended model of teacher preparation. The model comprises a 1+2 program of formal teacher preparation: a one-year teacher education course (the Graduate Diploma in Education), followed by a comprehensive two year program of workplace induction and ongoing professional learning tailored to meet graduate and employer needs. This paper reports on graduating students’ perceptions of their preparedness to teach as they transition from the Graduate Diploma in Education program to professional practice. The study concludes that innovative programs, including university-linked, ongoing professional learning support for teacher education graduates, may provide the way forward for enhancing the transition to practice for beginning teachers.

History and development of public health

- briefly describe the importance of public health history to contemporary public health - briefly describe the ancient history of public health - outline the key periods and activities in the modern history of Western public health - describe and understand the important roles of political, social, environmental and economic factors as they impact on health - consider the major factors that have influenced an understanding of contemporary public health in the past 40 years.

Analysing mentoring practices to understand how a preservice teacher reflects on practice to advance teaching

Mentors (cooperating classroom teachers) have a shared responsibility with universities for developing preservice teachers’ pedagogical practices, particularly towards becoming reflective practitioners. Preservice teachers need to participate actively in their own learning, by reflecting and acting on the mentor’s constructive feedback provided during planning and feedback dialogue sessions. This case study uses feedback practices outlined within a five-factor mentoring model to analyse dialogue between a mentor and her respective mentee during different stages in their school-based programs (first practicum). This investigation uses multiple data sources such as video and audio-recorded interviews, archival documents from participants such as lesson plans, reflections and reports to examine preservice teacher’s reflections and implementations of practice as a result of her mentor’s feedback (e.g., establish expectations, review lesson plans, observe teaching then provide oral and written feedback, and evaluate progress). Findings indicated that reflective thinking was more apparent when the mentor did not dominate conversations but instead asked astute pedagogical knowledge questions to facilitate the mentee’s reflections on practice.

Teachers' recognition and referral of anxiety disorders in primary school children

This study investigated the ability of primary school teachers to recognise and refer children with anxiety symptoms. Two hundred and ninety-nine primary school teachers completed a questionnaire exploring their recognition and referral responses to five hypothetical vignettes that described boys and girls with varying severity of anxiety symptoms. Results revealed that teachers were generally able to recognise and make the decision to refer children with severe levels of anxiety. However, they had difficulty distinguishing between children with moderate anxiety symptoms and a severe anxiety disorder. Female teachers were more likely to refer children than were male teachers. The implications and future research are discussed.

The development of a conceptual framework for a district 4-Year Pavement Management Plan, implementation of network-level project screening process

The Texas Department of Transportation (TxDOT) is concerned about the widening gap between preservation needs and available funding. Funding levels are not adequate to meet the preservation needs of the roadway network; therefore projects listed in the 4-Year Pavement Management Plan must be ranked to determine which projects should be funded now and which can be postponed until a later year. Currently, each district uses locally developed methods to prioritize projects. These ranking methods have relied on less formal qualitative assessments based on engineers’ subjective judgment. It is important for TxDOT to have a 4-Year Pavement Management Plan that uses a transparent, rational project ranking process. The objective of this study is to develop a conceptual framework that describes the development of the 4-Year Pavement Management Plan. It can be largely divided into three Steps; 1) Network-Level project screening process, 2) Project-Level project ranking process, and 3) Economic Analysis. A rational pavement management procedure and a project ranking method accepted by districts and the TxDOT administration will maximize efficiency in budget allocations and will potentially help improve pavement condition. As a part of the implementation of the 4-Year Pavement Management Plan, the Network-Level Project Screening (NLPS) tool including the candidate project identification algorithm and the preliminary project ranking matrix was developed. The NLPS has been used by the Austin District Pavement Engineer (DPE) to evaluate PMIS (Pavement Management Information System) data and to prepare a preliminary list of candidate projects for further evaluation.