Band gap tunable N-type molecules for organic field effect transistors

A series of four novel n-type molecules has been synthesized. Unlike previous approaches, the end group of these molecules was fixed and the molecular core was varied. The resulting materials were thoroughly analyzed. Electronic properties were derived from photoemission spectroscopy, optical properties were derived with the help of optical spectroscopy, and the structure of thin films on Au(111) was derived by scanning tunneling microscopy (STM). In addition, prototypical organic field-effect transistors (OFETs) (forming n-channels in OFETs) have been fabricated and tested. The correlation between the device performance of the respective OFETs (i.e., electron mobility) and their electronic as well as structural properties was investigated. It turned out that a combination of beneficial electronic and structural properties provides the best results. These findings are important for the design of new materials for future device applications.

A fluorenone based low band gap solution processable copolymer for air stable and high mobility organic field effect transistors

A fluorenone based alternating copolymer (PFN-DPPF) with a furan based fused aromatic moiety has been designed and synthesized. PFN-DPPF exhibits a small band gap with a lower HOMO value. Testing this polymer semiconductor as the active layer in organic thin-film transistors results in hole mobilities as high as 0.15 cm2 V-1 s-1 in air.

Furan substituted diketopyrrolopyrrole and thienylenevinylene based low band gap copolymer for high mobility organic thin film transistors

A novel solution processable donor-acceptor (D-A) based low band gap polymer semiconductor poly{3,6-difuran-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4- c]pyrrole-1,4-dione-alt-thienylenevinylene} (PDPPF-TVT), was designed and synthesized by a Pd-catalyzed Stille coupling route. An electron deficient furan based diketopyrrolopyrrole (DPP) block and electron rich thienylenevinylene (TVT) donor moiety were attached alternately in the polymer backbone. The polymer exhibited good solubility, film forming ability and thermal stability. The polymer exhibits wide absorption bands from 400 nm to 950 nm (UV-vis-NIR region) with absorption maximum centered at 782 nm in thin film. The optical band gap (Eoptg) calculated from the polymer film absorption onset is around 1.37 eV. The π-energy band level (ionization potential) calculated by photoelectron spectroscopy in air (PESA) for PDPPF-TVT is around 5.22 eV. AFM and TEM analyses of the polymer reveal nodular terrace morphology with optimized crystallinity after 200 °C thermal annealing. This polymer exhibits p-channel charge transport characteristics when used as the active semiconductor in organic thin-film transistor (OTFT) devices. The highest hole mobility of 0.13 cm 2 V -1 s -1 is achieved in bottom gate and top-contact OTFT devices with on/off ratios in the range of 10 6-10 7. This work reveals that the replacement of thiophene by furan in DPP copolymers exhibits such a high mobility, which makes DPP furan a promising block for making a wide range of promising polymer semiconductors for broad applications in organic electronics.

Evaluating operational cloud enterprise systems success : an organizational perspective

This paper presents a formative measurement index to assess cloud enterprise systems success. The scale development procedure is based on Moore and Benbasat (1991), including newer scale development elements which focus on the creation and assessment of formative constructs. The data is analysed using SmartPLS with a sample of 103 IT decision makers. The results show that the perception of net benefits is shaped not only by enterprise-system-specific factors like productivity improvements and higher quality of business processes, but also by factors which are specifically attributed to cloud systems, such as higher strategic flexibility. Reliability, user requirements and customization contribute most to the overall perception of system quality. Information quality shows no cloud-specific facets and is robust in the context of cloud enterprise systems.

User-led innovation in call center knowledge work

So called “knowledge work” is seen as integral to post-industrial society and, for some, information and communications technologies (ICTs) are critical enablers of the associated practices. Many still propose the technologically deterministic route of rolling out ICTs and expecting that users will, and indeed can, “download” what they know into a system that can then be used in a number of ways. This approach is usually underpinned by the predominant assumption that the system will be developed by one group (developers) and used by another group (users). In this paper, we report on an exploratory case study of the enactment of ICT supported knowledge work in a human resources contact center which illustrates the negotiable boundary between the developer and user in local level innovation processes. Drawing upon ideas from the social shaping of technology, we examine how discussions regarding producer-user relations in innovation processes require a degree of greater sophistication as we show how users often develop (or produce) technologies and work practices in situ—in this case, to enable knowledge work practices and contribute to the project of constructing the knowledge component of professional identity. Much has been made of contextualizing the user; further work is required to contextualize the developer as a user and understand the social actors in ICT innovation environments who straddle both domains

Secondary user relations in emerging mobile computing environments

Mobile technologies are enabling access to information in diverse environ.ments, and are exposing a wider group of individuals to said technology. Therefore, this paper proposes that a wider view of user relations than is usually considered in information systems research is required. Specifically, we examine the potential effects of emerging mobile technologies on end-­‐user relations with a focus on the ‘secondary user’, those who are not intended to interact directly with the technology but are intended consumers of the technology’s output. For illustration, we draw on a study of a U.K. regional Fire and Rescue Service and deconstruct mobile technology use at Fire Service incidents. Our findings provide insights, which suggest that, because of the nature of mobile technologies and their context of use, secondary user relations in such emerging mobile environments are important and need further exploration.

An experimental approach to air gap optimisation for a correction-less small field diode

Aim A recent Monte Carlo based study has shown that it is possible to design a diode that measures small field output factors equivalent to that in water. This is accomplished by placing an appropriate sized air gap above the silicon chip (1) with experimental results subsequently confirming that a particular Monte Carlo design was accurate (2). The aim of this work was to test if a new correction-less diode could be designed using an entirely experimental methodology. Method: All measurements were performed on a Varian iX at a depth of 5 cm, SSD of 95 cm and field sizes of 5, 6, 8, 10, 20 and 30 mm. Firstly, the experimental transfer of kq,clin,kq,msr from a commonly used diode detector (IBA, stereotactic field diode (SFD)) to another diode detector (Sun Nuclear, unshielded diode, (EDGEe)) was tested. These results were compared to Monte Carlo calculated values of the EDGEe. Secondly, the air gap above the EDGEe silicon chip was optimised empirically. Nine different air gap “tops” were placed above the EDGEe (air depth = 0.3, 0.6, 0.9 mm; air width = 3.06, 4.59, 6.13 mm). The sensitivity of the EDGEe was plotted as a function of air gap thickness for the field sizes measured. Results: The transfer of kq,clin,kq,msr from the SFD to the EDGEe was correct to within the simulation and measurement uncertainties. The EDGEe detector can be made “correction-less” for field sizes of 5 and 6 mm, but was ∼2% from being “correction-less” at field sizes of 8 and 10 mm. Conclusion Different materials will perturb small fields in different ways. A detector is only “correction-less” if all these perturbations happen to cancel out. Designing a “correction-less” diode is a complicated process, thus it is reasonable to expect that Monte Carlo simulations should play an important role.

Emergence and artistic visualisation

This research draws on theories of emergence to inform the creation of an artistic and direct visualization. This is an interactive artwork and drawing tool for creative participant experiences. As is discussed, emergence is characteristically creative. It is also debated across and within disciplines, resulting in a range of understandings as well as models. This paper shows how one field’s understanding of emergence (complexity theory) can be used to facilitate emergence in another domain (design research) and, importantly provide the opportunity for someone to act creatively. This paper begins with a brief review of some theories of emergence to show how they interrelate and can effect the perception of emergent structures in an observer, and, correspondingly, the design for creative experience. This is subsequently demonstrated in the second section of the paper where an interactive artwork and drawing application, Of me with me, is presented. This artwork by the author was created during collaboration with community artists from Cerebral Palsy League. The discussion covers the application of emergence theories to create this visualization in order facilitate the perception of structures and creative behaviours in a participant and to facilitate self-efficacy in the community artist user group.

Continuing to drive while sleepy : the influence of sleepiness countermeasures, motivation for driving sleepy, and risk perception

Driver sleepiness is a major contributor to road crashes. The current study sought to examine the association between perceptions of effectiveness of six sleepiness countermeasures and their relationship with self-reports of continuing to drive while sleepy among 309 drivers after controlling for the influence of age, sex, motivation for driving sleepy, and risk perception of sleepy driving. The results demonstrate that the variables of age, sex, motivation, and risk perception were significantly associated with self-reports of continuing to drive while sleepy and only one countermeasure was associated with self-reports of continuing to drive while sleepy. Further, it was found that age differences in self-reports of continuing to drive while sleepy was mediated by participants’ motivation and risk perception. These findings highlight modifiable factors that could be focused on with interventions that seek to modify drivers’ attitudes and behaviours of driving while sleepy.

A different breed altogether? Distinctions between local and metropolitan journalism cultures

While a number of scholars have explored the special exigencies of local as opposed to metropolitan journalism, rarely have studies examined such differences in relation to journalism culture as constituted by journalists’ professional views. To address the gap in our knowledge, this study reports results from a representative survey of local and metropolitan newspaper journalists in Australia. Findings suggest that territorial context accounts for some significant differences in journalists’ demographics, as well as their role perceptions. In line with past research, local newspaper journalists exhibit much stronger support for the community forum and advocacy role. At the same time, and contrary to expectations, there is very little difference in their support of the watchdog role compared with metropolitan journalists. By combining questions about journalistic ideals and enactment in their work, and finding differences in the two, this study also has important implications for the methodological development of survey studies.

Using the Event Analysis of Systemic Teamwork (EAST) to explore conflict between different road user groups when making right hand turns at urban intersections

Collisions between different types of road users at intersections form a substantial component of the road toll. This paper presents an analysis of driver, cyclist, motorcyclist and pedestrian behaviour at intersections that involved the application of an integrated suite of ergonomics methods, the Event Analysis of Systemic Teamwork (EAST) framework, to on-road study data. EAST was used to analyse behaviour at three intersections using data derived from an on-road study of driver, cyclist, motorcyclist and pedestrian behaviour. The analysis shows the differences in behaviour and cognition across the different road user groups and pinpoints instances where this may be creating conflicts between different road users. The role of intersection design in creating these differences in behaviour and resulting conflicts is discussed. It is concluded that currently intersections are not designed in a way that supports behaviour across the four forms of road user studied. Interventions designed to improve intersection safety are discussed.

Proactive safety assessment in roadwork zones : a synthesis of surrogate measures of safety

Work zone safety studies have traditionally relied on historical crash records—an approach which is reactive in nature as it requires crashes to accumulate first before taking any preventive actions. However, detailed and accurate data on work zone crashes are often not available, as is the case for Australian road work zones. The lack of reliable safety records and the reactive nature of the crash-based safety analysis approach motivated this research to seek alternative and proactive measures of safety. Various surrogate measures of safety have been developed in the traffic safety literature including time to collision, time to accident, gap time, post encroachment time, required deceleration rate, proportion of stopping distances, lateral distance to departure, and time to departure. These measures express how close road-user(s) are from a potential crash by analysing their movement trajectories. A review of this fast-growing literature is presented in this paper from the viewpoint of applying the measures to untangle work zone safety issues. The review revealed that the use of the surrogate measures is very limited for analysing work zone safety, although numerous studies have used these measures for analysing safety in other parts of the road network, such as intersections and motorway ramps. There exist great opportunities for adopting this proactive safety assessment approach to transform work zone safety for both roadworkers and motorists.

Utilizing voting systems for ranking user tweets

Twitter is a very popular social network website that allows users to publish short posts called tweets. Users in Twitter can follow other users, called followees. A user can see the posts of his followees on his Twitter profile home page. An information overload problem arose, with the increase of the number of followees, related to the number of tweets available in the user page. Twitter, similar to other social network websites, attempts to elevate the tweets the user is expected to be interested in to increase overall user engagement. However, Twitter still uses the chronological order to rank the tweets. The tweets ranking problem was addressed in many current researches. A sub-problem of this problem is to rank the tweets for a single followee. In this paper we represent the tweets using several features and then we propose to use a weighted version of the famous voting system Borda-Count (BC) to combine several ranked lists into one. A gradient descent method and collaborative filtering method are employed to learn the optimal weights. We also employ the Baldwin voting system for blending features (or predictors). Finally we use the greedy feature selection algorithm to select the best combination of features to ensure the best results.

Facial emotion modulates the neural mechanisms responsible for short interval time perception

Emotionally arousing events can distort our sense of time. We used mixed block/event-related fMRI design to establish the neural basis for this effect. Nineteen participants were asked to judge whether angry, happy and neutral facial expressions that varied in duration (from 400 to 1,600 ms) were closer in duration to either a short or long duration they learnt previously. Time was overestimated for both angry and happy expressions compared to neutral expressions. For faces presented for 700 ms, facial emotion modulated activity in regions of the timing network Wiener et al. (NeuroImage 49(2):1728–1740, 2010) namely the right supplementary motor area (SMA) and the junction of the right inferior frontal gyrus and anterior insula (IFG/AI). Reaction times were slowest when faces were displayed for 700 ms indicating increased decision making difficulty. Taken together with existing electrophysiological evidence Ng et al. (Neuroscience, doi: 10.3389/fnint.2011.00077, 2011), the effects are consistent with the idea that facial emotion moderates temporal decision making and that the right SMA and right IFG/AI are key neural structures responsible for this effect.