Comparative analysis of traffic state estimation ─ Cumulative counts-based and trajectory-based methods

The Macroscopic Fundamental Diagram (MFD) relates space-mean density and flow. Since the MFD represents the area-wide network traffic performance, studies on perimeter control strategies and network-wide traffic state estimation utilising the MFD concept have been reported. Most previous works have utilised data from fixed sensors, such as inductive loops, to estimate the MFD, which can cause biased estimation in urban networks due to queue spillovers at intersections. To overcome the limitation, recent literature reports the use of trajectory data obtained from probe vehicles. However, these studies have been conducted using simulated datasets; limited works have discussed the limitations of real datasets and their impact on the variable estimation. This study compares two methods for estimating traffic state variables of signalised arterial sections: a method based on cumulative vehicle counts (CUPRITE), and one based on vehicles’ trajectory from taxi Global Positioning System (GPS) log. The comparisons reveal some characteristics of taxi trajectory data available in Brisbane, Australia. The current trajectory data have limitations in quantity (i.e., the penetration rate), due to which the traffic state variables tend to be underestimated. Nevertheless, the trajectory-based method successfully captures the features of traffic states, which suggests that the trajectories from taxis can be a good estimator for the network-wide traffic states.

Electricity pricing in New Zealand and the Australian State of Queensland: Accounting for the impact of sector restructuring

The electricity industries of New Zealand (NZ) and the Australian state of Queensland have undergone substantial structural and regulatory reform with the common intent to improve economic efficiency. Deregulation and privatisation have been key elements of the reform but have been approached differently by each jurisdiction. This study traces the link between structural and regulatory regimes and asset valuation, profits and, ultimately, pricing. The study finds that key drivers in recent price increases are the government-owned generation and retail sector in NZ and the government-owned distribution sector in Queensland. It is concluded that, contrary to the rationale for the imposition of regulatory controls in a nonmarket environment, the regulatory regimes appear to have contributed to higher rather than lower pricing structures.

Roles, responsibilities and scope of practice: describing the ‘state of play’ for infection control professionals in Australia and New Zealand

Background In the past decade the policy and practice context for infection control in Australia and New Zealand has changed, with infection control professionals (ICPs) now involved in the implementation of a large number of national strategies. Little is known about the current ICP workforce and what they do in their day-to-day positions. The aim of this study was to describe the ICP workforce in Australia and New Zealand with a focus on roles, responsibilities, and scope of practice. Methods A cross-sectional design using snowball recruitment was employed. ICPs completed an anonymous web-based survey with questions on demographics; qualifications held; level of experience; workplace characteristics; and roles and responsibilities. Chi-squared tests were used to determine if any factors were associated with how often activities were undertaken. Results A total of 300 ICPs from all Australian states and territories and New Zealand participated. Most ICPs were female (94%); 53% were aged over 50, and 93% were employed in registered nursing roles. Scope of practice was diverse: all ICPs indicated they undertook a large number and variety of activities as part of their roles. Some activities were undertaken on a less frequent basis by sole practitioners and ICPs in small teams. Conclusion This survey provides useful information on the current education, experience levels and scope of practice of ICPs in Australia and New Zealand. Work is now required to establish the best mechanisms to support and potentially streamline scope of practice, so that infection-control practice is optimised.

Fire resistance of light gauge steel frame wall systems lined with gypsum plasterboards

Light gauge steel frame (LSF) wall systems are increasingly used in residential and commercial buildings as load bearing and non-load bearing elements. Conventionally, the fire resistance ratings of such building elements are determined using approximate prescriptive methods based on limited standard fire tests. However, recent studies have shown that in some instances real building fire time-temperature curves could be more severe than the standard fire curve, in terms of maximum temperature and rate of temperature rise. This has caused problems for safe evacuation and rescue activities, and in some instances has also lead to the collapse of buildings earlier than the prescribed fire resistance. Therefore a detailed research study into the performance of LSF wall systems under both standard fire and realistic fire conditions was undertaken using full scale fire tests to understand the fire performance of different LSF wall configurations. Both load bearing and non-load bearing full scale fire tests were performed on LSF walls configurations which included single layer, double layer, externally insulated wall panels made up of different steel sections and thicknesses of gypsum plasterboards. The non-load bearing fire test results were utilized to understand the factors affecting the fire resistance of LSF walls, while loading bearing fire test results led to development of simplified methods to predict the fire resistance ratings of load bearing LSF walls exposed to both standard and realistic design fires. This paper presents the results of full scale experimental study and highlights the effects of standard and realistic fire conditions on fire performance of LSF walls.

Correction factors for dynamic state estimation of aggregated generators

This paper presents an approach for dynamic state estimation of aggregated generators by introducing a new correction factor for equivalent inter-area power flows. The spread of generators from the center of inertia of each area is summarized by the correction term α on the equivalent power flow between the areas and is applied to the identification and estimation process. A nonlinear time varying Kalman filter is applied to estimate the equivalent angles and velocities of coherent areas by reducing the effect of local modes on the estimated states. The approach is simulated on two test systems and the results show the effect of the correction factor and the performance of the state estimation by estimating the inter-area dynamics of the system.

Numerical studies of gypsum plasterboard and MGO board lined LSF walls exposed to fire

Fire resistance of cold-formed light gauge steel frame (LSF) wall systems is enhanced by lining them with single or multiple layers of wall boards with varying thermal properties. These wall boards are gypsum plasterboards or Magnesium Oxide (MgO) boards produced by different manufacturers. Thermal properties of these boards appear to show considerable variations and this can lead to varying fire resistance levels (FRL) for their wall systems. Currently FRLs of wall systems are determined using full scale fire tests, but they are time consuming and expensive. Recent research studies on the fire performance of LSF wall systems have used finite element studies to overcome this problem, but they were developed based on 1-D and 2-D finite element platform capable of performing either heat transfer or structural analysis separately. Hence in this research a 3-D finite element model was developed first for LSF walls lined with gypsum plasterboard and cavity insulation materials. Accurate thermal properties of these boards are essential for finite element modelling, and thus they were measured at both ambient and elevated temperatures. This experimental study included specific heat, relative density and thermal conductivity of boards. The developed 3-D finite element model was then validated using the available fire tests results of LSF walls lined with gypsum plasterboard, and is being used to investigate the fire performance of different LSF wall configurations. The tested MgO board exhibited significant variations in their thermal properties in comparison to gypsum plasterboards with about 50% loss of its initial mass at about 500 ºC compared to 16% for gypsum plasterboards. Hence the FRL of MgO board lined LSF wall systems is likely to be significantly reduced. This paper presents the details of this research study on the fire performance of LSF wall systems lined with gypsum plasterboard and MgO board including the developed 3-D finite element models, thermal property tests and the results.

The state of the art of business process management research as published in the BPM Conference

The research field of Business Process Management (BPM) has gradually developed as a discipline situated within the computer, management and information systems sciences. Its evolution has been shaped by its own conference series, the BPM conference. Still, as with any other academic discipline, debates accrue and persist, which target the identity as well as the quality and maturity of the BPM field. In this paper, we contribute to the debate on the identity and progress of the BPM conference research community through an analysis of the BPM conference proceedings. We develop an understanding of signs of progress of research presented at this conference, where, how, and why papers in this conference have had an impact, and the most appropriate formats for disseminating influential research in this conference. Based on our findings from this analysis, we provide conclusions about the state of the conference series and develop a set of recommendations to further develop the conference community in terms of research maturity, methodological advance, quality, impact, and progression.

Recommendations from analyzing the state-of-the-art of business process management research

Business Process Management (BPM) as a research field integrates different perspectives from the disciplines computer science, management science and information systems research. Its evolution has by been shaped by the corresponding conferences series, the International Conference on Business Process Management (BPM conference). As much as in other academic discipline, there is an ongoing debate that discusses the identity, the quality and maturity of the BPM field. In this paper, we review and summarize the major findings a larger study that will be published in the Business & Information Systems Engineering journal in 2016. In the study, we investigate the identity and progress of the BPM conference research community through an analysis of the BPM conference proceedings. Based on our findings from this analysis, we formulate recommendations to further develop the conference community in terms of methodological advance, quality, impact and progression.

The Politics of Surveillance and Response to Disease Outbreaks: The New Frontier for States and Non-state Actors

The capacity to conduct international disease outbreak surveillance and share information about outbreaks quickly has empowered both State and Non-State Actors to take an active role in stopping the spread of disease by generating new technical means to identify potential pandemics through the creation of shared reporting platforms. Despite all the rhetoric about the importance of infectious disease surveillance, the concept itself has received relatively little critical attention from academics, practitioners, and policymakers. This book asks leading contributors in the field to engage with five key issues attached to international disease outbreak surveillance - transparency, local engagement, practical needs, integration, and appeal - to illuminate the political effect of these technologies on those who use surveillance, those who respond to surveillance, and those being monitored.

Global Media and National Policies : The Return of the State

Conventional wisdom views globalization as a process that heralds the diminishing role or even 'death' of the state and the rise of transnational media and transnational consumption, that defy state control or regulation. This book questions these assumptions and shows that the nation-state never left and is still a force to be reckoned with.

Inculcating character education through EFL teaching in Indonesian state schools

This paper describes how English as foreign language (EFL) teachers in Indonesia have implemented the recent character education policy within an era of school-based curriculum reform. The character education policy required all teachers, EFL teachers included, to instill certain values in every lesson whilst the school-based curriculum reform permitted teachers to develop locally responsive curriculum content. The design behind the reform seeks to sharpen education’s role as a site of moral inculcation in the face of growing social diversity that threatens social cohesion and the prolonged social problem of massive corruption. Drawing on Durkheim’s (1925) distinction between secular and religious morality, this paper considers how the Indonesian curriculum promoted rational or secular moral education and how the EFL teachers enacted religious moral education given religiosity is salient in both the community and schools of Indonesia. Bernstein’s concepts of pedagogic discourse, instructional and regulative discourses were adopted to analyse how EFL teachers have re-contextualized both curricular reforms in their micro pedagogic settings. The conclusion suggests that teachers’ implementation of moral education in their classes was dominated by their school communities’ and the teachers’ own preferred value of religiosity. Such values played out in their classes through both the regulative discourse and the instructional discourse.

Material characterisation and numerical modelling of gypsum plasterboards in fire

The fire resistance characteristic of LSF wall systems mainly depends on the protective linings in use, commonly gypsum plasterboards. However, unclassified boards with varying composition and more notably with ambiguous thermal properties are increasingly becoming available in the market. Therefore a study was undertaken with an aim to set minimum standards for fire protective boards used in LSF wall applications. This paper presents the details of this study based on material characterisation and finite element thermal modelling of the most commonly used fire protective board, gypsum plasterboards, to address these critical issues related to fire safety design. In the material characterisation phase of this study, thermal properties of three different gypsum plasterboards manufactured in Australia were measured, analysed and compared. Subsequently, it proposes a thermal property based “k-factor” capable of giving an overall measure of the fire performance of boards, so that it can be used in appropriately classifying fire protective boards. As it is not known how this factor relates to the overall fire performance of LSF wall systems, numerical models were also developed and used to simulate the performance of LSF walls exposed to the standard fire. Finally, a correlation between time-temperature profiles from numerical analyses and calculated k-factors was established.