Advanced practice: A survey of current perspectives of Australian pharmacists

Background An Advanced Pharmacy Practice Framework for Australia (the ‘APPF’) was published in October 2012. Further to the release of the APPF, the Advanced Pharmacy Practice Framework Steering Committee planned to develop an advanced practice recognition model for Australian pharmacists. Aim To gauge the perspectives of the pharmacy profession relating to advanced practice, via an online survey, in order to inform the design of the model. Method A survey was developed and administered to Australian pharmacists through SurveyMonkey . The survey content was based on findings from a review of national and international initiatives for recognition of advanced practice in pharmacy and other health disciplines, including medicine and nursing. Results The results of the survey showed that a high proportion of respondents considered they were already working at, or working towards achieving, an advanced level of practice. The responses relating to the assessment methods showed a clear preference for ‘submission of a professional portfolio’. A ‘written examination’ had a low level of support and in relation to an ‘oral examination by a panel’ there was a marked preference for a panel of multidisciplinary health professionals over a panel of pharmacists. Conclusion The survey outcomes will inform the development of an advanced pharmacy practice recognition model for Australian pharmacists, particularly in relation to the assessment methods. Survey outcomes also demonstrated that there is scope to further enhance the application of the APPF in the development and recognition of advanced practitioners, and to build greater awareness of the breadth of competencies encompassed by ‘advanced practice’.

Fair value accounting for non-current assets and audit fees: Evidence from Australian companies

We investigate the association between asset revaluations of non-current assets and audit fees, using a sample of ASX 300 companies from the years 2003–2007.We report that there is a significant increase in the audit fees paid when non-financial assets (PPEs, investment properties and intangible assets) are measured at fair values. Moreover, we provide evidence that an independent valuer or appraiser significantly weakens the positive association between asset revaluations and audit fees. Furthermore, companies whose noncurrent assets are revalued upwards and those that revalue their non-current assets upwards every year have significantly higher audit fees. Additional tests provide empirical evidence that the strength of corporate governance has a moderating effect on the level of audit fees. This study contributes to the ongoing debate on the role of fair value accounting. The findings suggest agency costs associated with fair value estimates may offset the benefits from the use of fair value accounting.

Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

Rolling out the future: The current status of the Australian NBN and its impact for property

The future functioning of the digital economy is inextricably linked to the use of high-speed broadband networks. As evidenced by recent Australian federal election campaigns, a focus has been on the rollout of the physical networks. The research seeks to determine the effectiveness of the current NBN rollout as a measure of Australia’s progression towards a fully functioning digital economy. The author examines submissions to the recent RTIRC Telecommunications Review 2015 in order to ascertain the NBN’s current impact upon Australia’s digital economy.

Mechanical testing of internal fixation devices: A theoretical and practical examination of current methods

Successful healing of long bone fractures is dependent on the mechanical environment created within the fracture, which in turn is dependent on the fixation strategy. Recent literature reports have suggested that locked plating devices are too stiff to reliably promote healing. However, in vitro testing of these devices has been inconsistent in both method of constraint and reported outcomes, making comparisons between studies and the assessment of construct stiffness problematic. Each of the methods previously used in the literature were assessed for their effect on the bending of the sample and concordant stiffness. The choice of outcome measures used in in vitro fracture studies was also assessed. Mechanical testing was conducted on seven hole locked plated constructs in each method for comparison. Based on the assessment of each method the use of spherical bearings, ball joints or similar is suggested at both ends of the sample. The use of near and far cortex movement was found to be more comprehensive and more accurate than traditional centrally calculated inter fragmentary movement values; stiffness was found to be highly susceptible to the accuracy of deformation measurements and constraint method, and should only be used as a within study comparison method. The reported stiffness values of locked plate constructs from in vitro mechanical testing is highly susceptible to testing constraints and output measures, with many standard techniques overestimating the stiffness of the construct. This raises the need for further investigation into the actual mechanical behaviour within the fracture gap of these devices.

The current status of heart failure diagnostic biomarkers

Heart failure (HF) affects approximately 23 million individuals worldwide and this number is increasing, due to an aging and growing population. Early detection of HF is crucial in the management of this debilitating disease. Current diagnostic methods for HF rely heavily on clinical imaging techniques and blood analysis, which makes them less than ideal for population-based screening purposes. Studies focusing on developing novel biomarkers for HF have utilized various techniques and biological fluids, including urine and saliva. Promising results from these studies imply that these body fluids can be used in evaluating the clinical manifestation of HF and will one day be integrated into a clinical workflow and facilitate HF management.

Current understanding of streptococcal urinary tract infection

Group B streptococcus (GBS), also known as Streptococcus agalactiae is a Gram-positive, β-hemolytic, chain-forming bacterium and a commensal within the genital tract flora in approximately 25% of healthy adult women (Campbell et al., 2000). The organism is a leading cause of serious infection in newborns, pregnant women, and older persons with chronic medical illness (Baker et al., Edwards&Baker, 2005). In neonates GBS infection most commonly causes pneumonia, meningitis, and sepsis. In addition to maternal cervicovaginal colonization and neonatal infection that can result from vertical transmission of GBS from mothers to their infants, the bacterium can also cause urinary tract infection (UTI). The spectrum of GBS UTI includes asymptomatic bacteriuria (ABU), cystitis, pyelonephritis, urethritis, and urosepsis (Bronsema et al., 1993, Edwards&Baker, 2005, Farley et al., 1993, Lefevre et al., 1991, McKenna et al., 2003, Munoz et al., 1992, Ulett et al., 2009). GBS ABU is particularly common among pregnant women, although those most at risk for cystitis due to GBS appear to be elderly individuals (Edwards&Baker, 2005, Falagas et al., 2006, Muller et al., 2006). In addition to acute and asymptomatic UTI other invasive diseases caused by GBS infection include skin infections, bacteraemia, pneumonia, arthritis, and endocarditis (Liston et al., 1979, Patil & Martin, 2010, Tissi et al., 1997, Trivalle et al., 1998). Thus, GBS is considered unique in terms of its ability to cause a spectrum of diseases in newborns and adult humans and its ability to colonize the genital tract of healthy women in a commensal-type manner...

The context of enterprise education: Insights into current practices

This paper presents the results of an investigation into contextual differences in the development and delivery of enterprise education in higher education globally. Using information gathered from an online survey distributed to enterprise educators, distinct differences in the provision of enterprise education are identified, as are differences of opinion among enterprise educators. The findings demonstrate that although enterprise education is highly diversified in terms of presentation, content and style, there are clear commonalities with regard to expected student outcomes. The respondents reported low levels of business start-up activity among students during enterprise education and/or within one year of graduation. Over 75% of the educators surveyed had personal start-up experience, and there was limited reliance on academic literature, with a preference for referencing broader stakeholder perspectives. With regard to the practical implications of this research, the international metric of enterprise education appears to be a broad set of enterprising skills that equip and enable students to recognize and exploit opportunities in order to navigate future unknowns. The commonly employed metric of business start-up appears less valid in light of this investigation.

New lads or ladettes? A critique of current theoretical explanations for young women’s violence proliferated over social media

Current theoretical explanations for young women’s violence examine physical violence as a masculine behaviour. This means that young women are constructed as rejecting elements of their femininity in favour of masculine behaviours in order to perform violence in an acceptable way, which results in them being constructed as violent femmes, new lads or ladettes. Alternatively, theoretical explanations construct young women as adhering to a feminine gender performance when avoiding physical violence, or engaging what are traditionally considered to be feminine characteristics of aggression. This paper critiques existing theoretical approaches applied to young women’s violence, by drawing on empirical research that examined young women’s physical altercations proliferated through social media. Preliminary research findings illustrate how continuing to construct young women’s violence through a gendered paradigm offers inadequate explanations for what young women’s violence actually entails. It concludes by suggesting how young women’s violence may be more adequately explained using a theoretical framework of embodying gender that moves away from gender dichotomies and constructs violence as a series of bodily practices.

Developing standardized methods to assess cost of healthy and unhealthy (current) diets in Australia

Unhealthy diets contribute at least 14% to Australia's disease burden and are driven by ‘obesogenic’ food environments. Compliance with dietary recommendations is particularly poor amongst disadvantaged populations including low socioeconomic groups, those living in rural/remote areas and Aboriginal and Torres Strait Islanders. The perception that healthy foods are expensive is a key barrier to healthy choices and a major determinant of diet-related health inequities. Available state/regional/local data (limited and non-comparable) suggests that, despite basic healthy foods not incurring GST, the cost of healthy food is higher and has increased more rapidly than unhealthy food over the last 15 years in Australia. However, there were no nationally standardised tools or protocols to benchmark, compare or monitor food prices and affordability in Australia. Globally, we are leading work to develop and test approaches to assess the price differential of healthy and less-healthy (current) diets under the food price module of the International Network for Food and Obesity/non-communicable diseases (NCDs) Research, Monitoring and Action Support (INFORMAS). This presentation describes contextualization of the INFORMAS approach to develop standardised Australian tools, survey protocols and data collection and analysis systems. The ‘healthy diet basket’ was based on the Australian Foundation Diet, 1 The ‘current diet basket’ and specific items included in each basket, were based on recent national dietary survey data.2 Data collection methods were piloted. The final tools and protocols were then applied to measure the price and affordability of healthy and less healthy (current) diets of different household groups in diverse communities across the nation. We have compared results for different geographical locations/population subgroups in Australia and assessed these against international INFORMAS benchmarks. The results inform the development of policy and practice, including those relevant to mooted changes to the GST base, to promote nutrition and healthy weight and prevent chronic disease in Australia.

Can current force fields reproduce ring puckering in 2-O-sulfo-α-l-iduronic acid? A molecular dynamics simulation study

The monosaccharide 2-O-sulfo-α-l-iduronic acid (IdoA2S) is one of the major components of glycosaminoglycans. The ability of molecular mechanics force fields to reproduce ring-puckering conformational equilibrium is important for the successful prediction of the free energies of interaction of these carbohydrates with proteins. Here we report unconstrained molecular dynamics simulations of IdoA2S monosaccharide that were carried out to investigate the ability of commonly used force fields to reproduce its ring conformational flexibility in aqueous solution. In particular, the distribution of ring conformer populations of IdoA2S was determined. The GROMOS96 force field with the SPC/E water potential can predict successfully the dominant skew-boat to chair conformational transition of the IdoA2S monosaccharide in aqueous solution. On the other hand, the GLYCAM06 force field with the TIP3P water potential sampled transitional conformations between the boat and chair forms. Simulations using the GROMOS96 force field showed no pseudorotational equilibrium fluctuations and hence no inter-conversion between the boat and twist boat ring conformers. Calculations of theoretical proton NMR coupling constants showed that the GROMOS96 force field can predict the skew-boat to chair conformational ratio in good agreement with the experiment, whereas GLYCAM06 shows worse agreement. The omega rotamer distribution about the C5–C6 bond was predicted by both force fields to have torsions around 10°, 190°, and 360°.

Unravelling the self-assembly of hydrogen bonded NDI semiconductors in 2D and 3D

Supramolecular ordering of organic semiconductors is the key factor defining their electrical characteristics. Yet, it is extremely difficult to control, particularly at the interface with metal and dielectric surfaces in semiconducting devices. We have explored the growth of n-type semiconducting films based on hydrogen-bonded monoalkylnaphthalenediimide (NDI-R) from solution and through vapor deposition on both conductive and insulating surfaces. We combined scanning tunneling and atomic force microscopies with X-ray diffraction analysis to characterize, at the submolecular level, the evolution of the NDI-R molecular packing in going from monolayers to thin films. On a conducting (graphite) surface, the first monolayer of NDI-R molecules adsorbs in a flat-lying (face-on) geometry, whereas in subsequent layers the molecules pack edge-on in islands (Stranski–Krastanov-like growth). On SiO2, the NDI-R molecules form into islands comprising edge-on packed molecules (Volmer–Weber mode). Under all the explored conditions, self-complementary H bonding of the imide groups dictates the molecular assembly. The measured electron mobility of the resulting films is similar to that of dialkylated NDI molecules without H bonding. The work emphasizes the importance of H bonding interactions for controlling the ordering of organic semiconductors, and demonstrates a connection between on-surface self-assembly and the structural parameters of thin films used in electronic devices.

Aqueous colloidal stability evaluated by zeta potential measurement and resultant TiO2 for superior photovoltaic performance

Controlling the morphological structure of titanium dioxide (TiO 2) is crucial for obtaining superior power conversion efficiency for dye-sensitized solar cells. Although the sol-gel-based process has been developed for this purpose, there has been limited success in resisting the aggregation of nanostructured TiO2, which could act as an obstacle for mass production. Herein, we report a simple approach to improve the efficiency of dye-sensitized solar cells (DSSC) by controlling the degree of aggregation and particle surface charge through zeta potential analysis. We found that different aqueous colloidal conditions, i.e., potential of hydrogen (pH), water/titanium alkoxide (titanium isopropoxide) ratio, and surface charge, obviously led to different particle sizes in the range of 10-500 nm. We have also shown that particles prepared under acidic conditions are more effective for DSSC application regarding the modification of surface charges to improve dye loading and electron injection rate properties. Power conversion efficiency of 6.54%, open-circuit voltage of 0.73 V, short-circuit current density of 15.32 mA/cm2, and fill factor of 0.73 were obtained using anatase TiO 2 optimized to 10-20 nm in size, as well as by the use of a compact TiO2 blocking layer.