405 resultados para Ant-plant interaction
Resumo:
Rupture of atherosclerotic plaque is a major cause of mortality. Plaque stress analysis, based on patient-specific multisequence in vivo MRI, can provide critical information for the understanding of plaque rupture and could eventually lead to plaque rupture prediction. However, the direct link between stress and plaque rupture is not fully understood. In the present study, the plaque from a patient who recently experienced a transient ischaemic attack (TIA) was studied using a fluid-structure interaction method to quantify stress distribution in the plaque region based on in vivo MR images. The results showed that wall shear stress is generally low in the artery with a slight increase at the plaque throat owing to minor luminal narrowing. The oscillatory shear index is much higher in the proximal part of the plaque. Both local wall stress concentrations and the relative stress variation distribution during a cardiac cycle indicate that the actual plaque rupture site is collocated with the highest rupture risk region in the studied patient.
Resumo:
Atherosclerotic plaque rupture has been extensively considered as the leading cause of death in western countries. It is believed that high stresses within plaque can be an important factor on triggering the rupture of the plaque. Stress analysis in the coronary and carotid arteries with plaque have been developed by many researchers from 2D to 3-D models, from structure analysis only to the Fluid-Structure Interaction (FSI) models[1].
Resumo:
It has been well accepted that over 50% of cerebral ischemic events are the result of rupture of vulnerable carotid atheroma and subsequent thrombosis. Such strokes are potentially preventable by carotid interventions. Selection of patients for intervention is currently based on the severity of carotid luminal stenosis. It has been, however, widely accepted that luminal stenosis alone may not be an adequate predictor of risk. To evaluate the effects of degree of luminal stenosis and plaque morphology on plaque stability, we used a coupled nonlinear time-dependent model with flow-plaque interaction simulation to perform flow and stress/strain analysis for stenotic artery with a plaque. The Navier-Stokes equations in the Arbitrary Lagrangian-Eulerian (ALE) formulation were used as the governing equations for the fluid. The Ogden strain energy function was used for both the fibrous cap and the lipid pool. The plaque Principal stresses and flow conditions were calculated for every case when varying the fibrous cap thickness from 0.1 to 2mm and the degree of luminal stenosis from 10% to 90%. Severe stenosis led to high flow velocities and high shear stresses, but a low or even negative pressure at the throat of the stenosis. Higher degree of stenosis and thinner fibrous cap led to larger plaque stresses, and a 50% decrease of fibrous cap thickness resulted in a 200% increase of maximum stress. This model suggests that fibrous cap thickness is critically related to plaque vulnerability and that, even within presence of moderate stenosis, may play an important role in the future risk stratification of those patients when identified in vivo using high resolution MR imaging.
Resumo:
Background and Purpose Acute cerebral ischemic events are associated with rupture of vulnerable carotid atheroma and subsequent thrombosis. Factors such as luminal stenosis and fibrous cap thickness have been thought to be important risk factors for plaque rupture. We used a flow-structure interaction model to simulate the interaction between blood flow and atheromatous plaque to evaluate the effect of the degree of luminal stenosis and fibrous cap thickness on plaque vulnerability. Methods A coupled nonlinear time-dependent model with a flow-plaque interaction simulation was used to perform flow and stress/strain analysis in a stenotic carotid artery model. The stress distribution within the plaque and the flow conditions within the vessel were calculated for every case when varying the fibrous cap thickness from 0.1 to 2 mm and the degree of luminal stenosis from 10% to 95%. A rupture stress of 300 kPa was chosen to indicate a high risk of plaque rupture. A 1-sample t test was used to compare plaque stresses with the rupture stress. Results High stress concentrations were found in the plaques in arteries with >70% degree of stenosis. Plaque stresses in arteries with 30% to 70% stenosis increased exponentially as fibrous cap thickness decreased. A decrease of fibrous cap thickness from 0.4 to 0.2 mm resulted in an increase of plaque stress from 141 to 409 kPa in a 40% degree stenotic artery. Conclusions There is an increase in plaque stress in arteries with a thin fibrous cap. The presence of a moderate carotid stenosis (30% to 70%) with a thin fibrous cap indicates a high risk for plaque rupture. Patients in the future may be risk stratified by measuring both fibrous cap thickness and luminal stenosis.
Resumo:
Effects of plant height on Fusarium crown rot (FCR) disease severity were investigated using 12 pairs of near-isogenic lines (NILs) for six different reduced height (Rht) genes in wheat. The dwarf isolines all gave better FCR resistance when compared with their respective tall counterparts, although the Rht genes involved in these NILs are located on several different chromosomes. Treating plants with exogenous gibberellin increased FCR severity as well as seedling lengths in all of the isolines tested. Analysis of the expression of several defense genes with known correlation with resistance to FCR pathogens between the Rht isolines following FCR inoculation indicated that the better resistance of the dwarf isolines was not due to enhanced defense gene induction. These results suggested that the difference in FCR severity between the tall and dwarf isolines is likely due to their height difference per se or to some physiological and structural consequences of reduced height. Thus, caution should be taken when considering to exploit any FCR locus located near a height gene.
Resumo:
Driving can be a lonely activity. While there has been a lot of research and technical inventions concerning car-to-car communication and passenger entertainment, there is still little work concerning connecting drivers. Whereas tourism is very much a social activity, drive tourists have few options to communicate with fellow travellers. The proposed project is placed at the intersection of tourism and driving and aims to enhance the trip experience during driving through social interaction. This thesis explores how a mobile application that allows instant messaging between travellers sharing similar context can add to road trip experiences. To inform the design of such an application, the project adopted the principle of the user-centred design process. User needs were assessed by running an ideation workshop and a field trip. Findings of both studies have shown that tourists have different preferences and diverse attitudes towards contacting new people. Yet all participants stressed the value of social recommendations. Based on those results and a later expert review, three prototype versions of the system were created. A prototyping session with potential end users highlighted the most important features including the possibility to view user profiles, choose between text and audio input and receive up-to-date information. An implemented version of the prototype was evaluated in an exploratory study to identify usability related problems in an actual use case scenario as well as to find implementation bugs. The outcomes of this research are relevant for the design of future mobile tourist guides that leverage from benefits of social recommendations.
Resumo:
The combination of dwindling petroleum reserves and population growth make the development of renewable energy and chemical resources more pressing than ever before. Plant biomass is the most abundant renewable source for energy and chemicals. Enzymes can selectively convert the polysaccharides in plant biomass into simple sugars which can then be upgraded to liquid fuels and platform chemicals using biological and/or chemical processes. Pretreatment is essential for efficient enzymatic saccharification of plant biomass and this article provides an overview of how organic solvent (organosolv) pretreatments affect the structure and chemistry of plant biomass, and how these changes enhance enzymatic saccharification. A comparison between organosolv pretreatments utilizing broadly different classes of solvents (i.e., low boiling point, high boiling point, and biphasic) is presented, with a focus on solvent recovery and formation of by-products. The reaction mechanisms that give rise to these by-products are investigated and strategies to minimize by-product formation are suggested. Finally, process simulations of organosolv pretreatments are compared and contrasted, and discussed in the context of an industrial-scale plant biomass to fermentable sugar process.
Resumo:
The research offers a deeper understanding of how objects currently facilitate social interaction and physical activity for older adults living independently. It uses this awareness to develop, from a human perspective, considerations for the design of internet connected objects that provide novel ways of maintaining contact with loved ones. The research found that people invest emotional attachment to objects and objects foster emotional responses in people. Objects can facilitate feeling connected to another however the relationship is a result of time and repeated interaction. Recreating this connection/relationship digitally is not as simple as attaching a hyperlink.
Resumo:
An overview of teaching and research activities in the area of plant anatomy at QUT is provided. The current status of teaching of technical skills in plant anatomy is discussed briefly. Examples of applications of plant anatomy to a diverse range of fields are provided, including the crossover between art and science.
Resumo:
Serum gamma-glutamyl transferase (GGT) activity is a marker of liver disease which is also prospectively associated with the risk of all-cause mortality, cardiovascular disease, type 2 diabetes and cancers. We have discovered novel loci affecting GGT in a genome-wide association study (rs1497406 in an intergenic region of chromosome 1, P = 3.9 x 10(-8); rs944002 in C14orf73 on chromosome 14, P = 4.7 x 10(-13); rs340005 in RORA on chromosome 15, P = 2.4 x 10(-8)), and a highly significant heterogeneity between adult and adolescent results at the GGT1 locus on chromosome 22 (maximum P(HET) = 5.6 x 10(-12) at rs6519520). Pathway analysis of significant and suggestive single-nucleotide polymorphism associations showed significant overlap between genes affecting GGT and those affecting common metabolic and inflammatory diseases, and identified the hepatic nuclear factor (HNF) family as controllers of a network of genes affecting GGT. Our results reinforce the disease associations of GGT and demonstrate that control by the GGT1 locus varies with age.
Resumo:
OBJECTIVE: To further investigate a common variant (rs9939609) in the fat mass- and obesity-associated gene (FTO), which recent genome-wide association studies have shown to be associated with body mass index (BMI) and obesity. DESIGN: We examined the effect of this FTO variant on BMI in 3353 Australian adult male and female twins. RESULTS: The minor A allele of rs9939609 was associated with an increased BMI (P=0.0007). Each additional copy of the A allele was associated with a mean BMI increase of approximately 1.04 kg/m(2) (approximately 3.71 kg). Using variance components decomposition, we estimate that this single-nucleotide polymorphism accounts for approximately 3% of the genetic variance in BMI in our sample (approximately 2% of the total variance). By comparing intrapair variances of monozygotic twins of different genotypes we were able to perform a direct test of gene by environment (G x E) interaction in both sexes and gene by parity (G x P) interaction in women, but no evidence was found for either. CONCLUSIONS: In addition to supporting earlier findings that the rs9939609 variant in the FTO gene is associated with an increased BMI, our results indicate that the associated genetic effect does not interact with environment or parity.
Resumo:
Plasmonics is a recently emerged technology that enables the compression of electromagnetic waves into miniscule metallic structures, thus enabling the focusing and routing of light on the nanoscale. Plasmonic waveguides can be used to miniaturise the size of integrated chip circuits while increasing the data transmission speed. Plasmonic waveguides are used to route the plasmons around a circuit and are a major focus of this thesis. Also, plasmons are highly sensitive to the surrounding dielectric environment. Using this property we have experimentally realised a refractive index sensor to detect refractive index change in solutions.
Resumo:
This paper is concerned with the degree to which the graduate skills required by industry are developed in Australian universities. Despite acknowledgement of the need to increase the graduate skills of students, it would seem that the stated intentions of Australian universities in this respect do not yet meet the expectations of industry. The development of an enterprise program at the University of Tasmania provides by way of example, support that the development of industry-desired skills is possible alongside the desirable knowledge outcomes of a university. It is argued that lecturers and students must give and accept more responsibility for learning to enable the development of desirable graduate skills.
Resumo:
This article introduces the theme issue on social interaction and reflection for behaviour change. A large body of research exists on systems designed to help users in changing their behaviours, for instance, to exercise more regularly or to reduce energy consumption. Increasingly, these systems focus on multiple users, often to encourage open-ended reflection rather than prescribing a particular course of action. As background for this theme issue, this article presents a literature review on behaviour change support systems that focus on social interaction and reflection. The review highlights five key approaches amongst these systems: social traces, social support, collective use, reflection-in-action, and reflection-on-action. Each approach offers unique benefits, but also challenges for the design of behaviour change support systems. We highlight how the articles in this theme issue contribute to our current understanding of these five approaches, and beyond that, set out some broad directions for future work.
Resumo:
In this paper we consider HCI's role in technology interventions for health and well-being. Three projects carried out by the authors are analysed by appropriating the idea of a value chain to chart a causal history from proximal effects generated in early episodes of design through to distal health and well-being outcomes. Responding to recent arguments that favour bounding HCI's contribution to local patterns of use, we propose an unbounded view of HCI that addresses an extended value chain of influence. We discuss a view of HCI methods as mobilising this value chain perspective in multi-disciplinary collaborations through its emphasis on early prototyping and naturalistic studies of use.