Creating employability skills in SMEs: Modification through interaction

This paper is concerned with the degree to which the graduate skills required by industry are developed in Australian universities. Despite acknowledgement of the need to increase the graduate skills of students, it would seem that the stated intentions of Australian universities in this respect do not yet meet the expectations of industry. The development of an enterprise program at the University of Tasmania provides by way of example, support that the development of industry-desired skills is possible alongside the desirable knowledge outcomes of a university. It is argued that lecturers and students must give and accept more responsibility for learning to enable the development of desirable graduate skills.

Superhydrophobic fabrics for oil-water separation based on the metal organic charge transfer complex CuTCNAQ

This work reports on the fabrication of a superhydrophobic nylon textile based on the organic charge transfer complex CuTCNAQ (TCNAQ = 11,11,12,12-tetracyanoanthraquinodimethane). The nylon fabric that is metallized with copper undergoes a spontaneous chemical reaction with TCNAQ dissolved in acetonitrile to form nanorods of CuTCNAQ that are intertwined over the entire surface of the fabric. This creates the necessary micro and nanoscale roughness that is required for the Cassie-Baxter state thereby achieving a superhydrophobic/superoleophilic surface without the need for a fluorinated surface. The material is characterised with SEM, FT-IR and XPS spectroscopy and investigated for its ability to separate oil and water in two modes, namely under gravity and as an absorbent. It is found that the fabric can separate dichloromethane, olive oil and crude oil from water and in fact reduce the water content of the oil during the separation process. The fabric is reusable and tolerant to conditions such as seawater, hydrochloric acid and extensive time periods on the shelf. Given that CuTCNAQ is a copper based semiconductor may also open up the possibility of other applications in areas such as photocatalysis and antibacterial applications.

The gradual release of responsibility: A case study of teaching science inquiry skills

This thesis investigated how a year-4 teacher used a pedagogical approach referred to as the Gradual Release of Responsibility (GRR) model of instruction for teaching Science Inquiry Skills in a primary classroom. Through scaffolding her students' learning using the GRR, the teacher guided her students towards developing an understanding about Scientific Inquiry leading to the foundations of scientific literacy. A learning environment was established in which students engaged in rich conversations, designed and conducted experiments using fair testing procedures, analysed and offered justifications for results, and negotiated knowledge claims in ways similar to some of those in the scientific community.

'Create a Better Online You': Designing online learning resources to develop undergraduate social media skills

This article charts the development of the 'Create a Better Online You' (CBOY) project. The focus of CBOY was the social media skills of undergraduate students at QUT. While many students will have encountered 'cybersafety' training in primary or secondary school, however, a comprehensive environmental scan revealed little in the way of social media resources targeted at undergraduate students. In particular, there was little to no focus on the ways in which social media could be used strategically to develop a positive online reputation and enhance chances of employability post tertiary education. The resources created as part of CBOY were the result of a comprehensive literature review, environmental scan, interviews with key internal and external stakeholders, and in discussion with undergraduate students at Queensland University of Technology (QUT). Following the comprehensive environmental scan, it appears that CBOY represents one of the first free, openly accessible, interactive resources targeting the social media skills of undergraduates.

Formalising the vernacular: Social media skills in higher education

This paper discusses the issue of social media skills using a literacy framework. Firstly, it argues that social media skills are a form of vernacular, or ‘everyday’, literacy and articulates the issues associated with trying to formalise these skills within the curriculum. Secondly, it calls for greater explicit attention to social media skills within higher education, by arguing that social media literacies are a part of new literacies. It evaluates QUT’s “Create a Better Online You” suite of social media resources in light of this framework, and discusses the role of libraries in addressing social media skills.

Formula apportionment and transfer pricing under oligopolistic competition

This paper demonstrates that under conditions of imperfect (oligopolistic) competition, a transition from separate accounting (SA) to formula apportionment (FA) does not eliminate the problem of profit shifting via transfer pricing. In particular, if affiliates of a multinational firm face oligopolistic competition, it is beneficial for the multinational to manipulate transfer prices for tax–saving as well as strategic reasons under both FA and SA. The analysis shows that a switch from SA rules to FA rules may actually strengthen profit shifting activities by multinationals.

Multiple roles of transfer prices: One vs. two books

This paper investigates multiple roles of transfer prices for shipments of goods and services between entities of a multinational enterprise. At the center is the role of transfer pricing (TP) in tax manipulation, but other roles having to do with internal operations or strategic delegation, etc. are also considered. The interesting question is to what extent and how the different roles of TPs interfere with each other. The answer depends on whether companies use one or two books, i.e. whether they (can) apply different TPs for different purposes. We illustrate, in a stylized model, the competing aims of tax manipulation and strategic delegation. Finally, we briefly look at selected reform proposals, concluding that either TP problems are not addressed, or else new distortions will be introduced instead.

Transfer pricing rules and competing governments

The literature on the regulation of multinationals' transfer prices has not considered the possibility that governments may use transfer pricing rules strategically when they compete with other governments. The present paper analyses this case and shows that, even in the absence of agency considerations, a non‐cooperative equilibrium is characterised by above‐optimal levels of effective taxation. We then derive conditions under which harmonization of transfer pricing rules lead to a Pareto improvement, and show that harmonization according to the ‘arm's length’ principle—the form of harmonization advocated by the OECD—may not be Pareto improving.

The transfer problem and the intertemporal terms of trade

In this paper the effects of a transfer on the intertemporal terms of trade are examined in the context of a simple two-country, two-period model. When intertemporal trade occurs because the two economies have different rates of time preference, a transfer improves the terms of trade of the paying country. Alternatively, when trade occurs owing to international differences in the endowments of goods over the two periods, the effect of a transfer depends on (a) the relationship between the interest rate and the rates of time preference of the two countries and (b) the relationship between their elasticities of intertemporal consumption substitution.

Blended learning in medical imaging pre-clinical skills training – does it work?

Undergraduate Medical Imaging (MI)students at QUT attend their first clinical placement towards the end of semester two. Students undertake two (pre)clinical skills development units – one theory and one practical. Students gain good contextual and theoretical knowledge during these units via a blended learning model with multiple learning methods employed. Students attend theory lectures, practical sessions, tutorial sessions in both a simulated and virtual environment and also attend pre-clinical scenario based tutorial sessions. The aim of this project is to evaluate the use of blended learning in the context of 1st year Medical Imaging Radiographic Technique and its effectiveness in preparing students for their first clinical experience. It is hoped that the multiple teaching methods employed within the pre-clinical training unit at QUT builds students clinical skills prior to the real situation. A quantitative approach will be taken, evaluating via pre and post clinical placement surveys. This data will be correlated with data gained in the previous year on the effectiveness of this training approach prior to clinical placement. In 2014 59 students were surveyed prior to their clinical placement demonstrated positive benefits of using a variety of learning tools to enhance their learning. 98.31%(n=58)of students agreed or strongly agreed that the theory lectures were a useful tool to enhance their learning. This was followed closely by 97% (n=57) of the students realising the value of performing role-play simulation prior to clinical placement. Tutorial engagement was considered useful for 93.22% (n=55) whilst 88.14% (n=52) reasoned that the x-raying of phantoms in the simulated radiographic laboratory was beneficial. Self-directed learning yielded 86.44% (n=51). The virtual reality simulation software was valuable for 72.41% (n=42) of the students. Of the 4 students that disagreed or strongly disagreed with the usefulness of any tool they strongly agreed to the usefulness of a minimum of one other learning tool. The impact of the blended learning model to meet diverse student needs continues to be positive with students engaging in most offerings. Students largely prefer pre -clinical scenario based practical and tutorial sessions where 'real-world’ situations are discussed.

Single layer graphene film by ethanol chemical vapor deposition: Highly efficient growth and clean transfer method

The choice of ethanol (C2H5OH) as carbon source in the Chemical Vapor Deposition (CVD) of graphene on copper foils can be considered as an attractive alternative among the commonly used hydrocarbons, such as methane (CH4) [1]. Ethanol, a safe, low cost and easy handling liquid precursor, offers fast and efficient growth kinetics with the synthesis of fullyformed graphene films in just few seconds [2]. In previous studies of graphene growth from ethanol, various research groups explored temperature ranges lower than 1000 °C, usually reported for methane-assisted CVD. In particular, the 650–850 °C and 900 °C ranges were investigated, respectively for 5 and 30 min growth time [3, 4]. Recently, our group reported the growth of highly-crystalline, few-layer graphene by ethanol-CVD in hydrogen flow (1– 100 sccm) at high temperatures (1000–1070 °C) using growth times typical of CH4-assisted synthesis (10–30 min) [5]. Furthermore, a synthesis time between 20 and 60 s in the same conditions was explored too. In such fast growth we demonstrated that fully-formed graphene films can be grown by exposing copper foils to a low partial pressure of ethanol (up to 2 Pa) in just 20 s [6] and we proposed that the rapid growth is related to an increase of the Cu catalyst efficiency due weak oxidizing nature of ethanol. Thus, the employment of such liquid precursor, in small concentrations, together with a reduced time of growth and very low pressure leads to highly efficient graphene synthesis. By this way, the complete coverage of a copper catalyst surface with high spatial uniformity can be obtained in a considerably lower time than when using methane.

The potential benefits of divergent thinking and metacognitive skills in STEAM learning: A discussion paper

In the wake of an almost decade long economic downturn and increasing competition from developing economies, a new agenda in the Australian Government for science, technology, engineering, and mathematics (STEM) education and research has emerged as a national priority. However, to art and design educators, the pervasiveness and apparent exclusivity of STEM can be viewed as another instance of art and design education being relegated to the margins of curriculum (Greene, 1995). In the spirit of interdisciplinarity, there have been some recent calls to expand STEM education to include the arts and design, transforming STEM into STEAM in education (Maeda, 2013). As with STEM, STEAM education emphasises the connections between previously disparate disciplines, meaning that education has been conceptualised in different ways, such as focusing on the creative design thinking process that is fundamental to engineering and art (Bequette & Bequette, 2012). In this article, we discuss divergent creative design thinking process and metacognitive skills, how, and why they may enhance learning in STEM and STEAM.

Trade wars in the TRIPS Council: Intellectual property, technology transfer, and climate change

This Chapter considers the geopolitical conflicts in respect of intellectual property, trade, and climate change in the TRIPS Agreement 1994 under the World Trade Organization (WTO). In particular, it focuses upon debates in the TRIPS Council on the topic of patent law and clean energy in 2013 and 2014. The chapter highlights the development agenda of a number of developing countries who are keen for access to clean energy to combat climate change and global warming. It also considers the mixed contributions of members of the BRICS/ BASIC group – including Brazil, India, China, and South Africa. This chapter highlights the intellectual property maximalist position of a number of developed countries on intellectual property, climate change, and trade. Seeking to overcome this conflict and stalemate, this Chapter puts forward both procedural and substantial reform options in respect of intellectual property, trade, and climate change in the TRIPS Council and the WTO. It also flags that the TRIPS Agreement 1994 could well be displaced by the rise of mega-regional trade agreements – such as the Trans-Pacific Partnership (TPP), and the Trans-Atlantic Trade and Investment Partnership (TTIP).