A near Optimal Cane Rail Scheduler under Limited and Unlimited Capacity Constraints

Australia is the world’s third largest exporter of raw sugar after Brazil and Thailand, with around $2.0 billion in export earnings. Transport systems play a vital role in the raw sugar production process by transporting the sugarcane crop between farms and mills. In 2013, 87 per cent of sugarcane was transported to mills by cane railway. The total cost of sugarcane transport operations is very high. Over 35% of the total cost of sugarcane production in Australia is incurred in cane transport. A cane railway network mainly involves single track sections and multiple track sections used as passing loops or sidings. The cane railway system performs two main tasks: delivering empty bins from the mill to the sidings for filling by harvesters; and collecting the full bins of cane from the sidings and transporting them to the mill. A typical locomotive run involves an empty train (locomotive and empty bins) departing from the mill, traversing some track sections and delivering bins at specified sidings. The locomotive then, returns to the mill, traversing the same track sections in reverse order, collecting full bins along the way. In practice, a single track section can be occupied by only one train at a time, while more than one train can use a passing loop (parallel sections) at a time. The sugarcane transport system is a complex system that includes a large number of variables and elements. These elements work together to achieve the main system objectives of satisfying both mill and harvester requirements and improving the efficiency of the system in terms of low overall costs. These costs include delay, congestion, operating and maintenance costs. An effective cane rail scheduler will assist the traffic officers at the mill to keep a continuous supply of empty bins to harvesters and full bins to the mill with a minimum cost. This paper addresses the cane rail scheduling problem under rail siding capacity constraints where limited and unlimited siding capacities were investigated with different numbers of trains and different train speeds. The total operating time as a function of the number of trains, train shifts and a limited number of cane bins have been calculated for the different siding capacity constraints. A mathematical programming approach has been used to develop a new scheduler for the cane rail transport system under limited and unlimited constraints. The new scheduler aims to reduce the total costs associated with the cane rail transport system that are a function of the number of bins and total operating costs. The proposed metaheuristic techniques have been used to find near optimal solutions of the cane rail scheduling problem and provide different possible solutions to avoid being stuck in local optima. A numerical investigation and sensitivity analysis study is presented to demonstrate that high quality solutions for large scale cane rail scheduling problems are obtainable in a reasonable time. Keywords: Cane railway, mathematical programming, capacity, metaheuristics

Continuous after-the-fact leakage-resilient eCK-secure key exchange

Security models for two-party authenticated key exchange (AKE) protocols have developed over time to capture the security of AKE protocols even when the adversary learns certain secret values. Increased granularity of security can be modelled by considering partial leakage of secrets in the manner of models for leakage-resilient cryptography, designed to capture side-channel attacks. In this work, we use the strongest known partial-leakage-based security model for key exchange protocols, namely continuous after-the-fact leakage eCK (CAFL-eCK) model. We resolve an open problem by constructing the first concrete two-pass leakage-resilient key exchange protocol that is secure in the CAFL-eCK model.

Empowering PNG Women through Building Media Arts Production Capacity as Cultural Drivers: Showreel

The creative work comprises six short digital screen stories and emerges from a collaboration between the Discipline of Film Screen and Animation at Queensland University of Technology and the Centre for Social and Creative Media at University of Goroka, funded via the Department of Foreign Affairs and Trade's Australia Awards Fellowship. Six fellows traveled from Papua New Guinea to Brisbane for a two-week intensive course to learn the advanced skills necessary in order to create media that will empower women and girls to make more of their own economies in Papua New Guinea, and increase the representation of women and their well-being through leadership and decision-making. The resulting creative work is evidence of innovative media teaching-making methods designed to build human and cultural assets in PNG and address the increasing demand for media materials driven by the influx of mobile phones and internet services. The creative work provides a platform to directly address and positively impact gender issues in PNG and builds on the success of the Pawa Meri project, which trained six female directors to tell stories of women in leadership roles in PNG. One of the directors was a producer of this creative work. The creative work frames but problematises the complex issues influencing gender equity through the selection of content and narrative structures in ways which address the dynamics of male/female relationships and power in PNG society and will include strategies to illustrate transformed male and female behaviours. The creative work adopts a scaffolded approach, incorporating the findings of the Train the Trainer approach developed by UoG and QUT for the Life Drama research project. The creative work takes into account current developmental themes and approaches in the production of rich media products, and skills the key participants so that they are able to in turn train others in the wider community. The creative work was presented to partners and key stakeholders on 3 July 2015 at the Glasshouse, QUT Creative Industries Precinct and at the Dean’s Research Seminar Poster Exhibition 15 July 2015 at Room 212-213, Level 2, J Block, Gardens Point QUT and subsequent eBook. It has since returned to PNG to be showcased and distributed, and the skills and strategies disseminated.

Optimization models for expanding a railway’s theoretical capacity

Changing the topology of a railway network can greatly affect its capacity. Railway networks however can be altered in a multitude of different ways. As each way has significant immediate and long term financial ramifications, it is a difficult task to decide how and where to expand the network. In response some railway capacity expansion models (RCEM) have been developed to help capacity planning activities, and to remove physical bottlenecks in the current railway system. The exact purpose of these models is to decide given a fixed budget, where track duplications and track sub divisions should be made, in order to increase theoretical capacity most. These models are high level and strategic, and this is why increases to the theoretical capacity is concentrated upon. The optimization models have been applied to a case study to demonstrate their application and their worth. The case study evidently shows how automated approaches of this nature could be a formidable alternative to current manual planning techniques and simulation. If the exact effect of track duplications and sub-divisions can be sufficiently approximated, this approach will be very applicable.

Fatigue capacity of cold-formed steel roof battens under cyclic wind uplift loads

Steel roofs made of thin cold-formed steel roof claddings and battens are widely used in low-rise residential and industrial buildings all around the world. However, they suffer from premature localised pull-through failures in the batten to rafter connections during high wind events. A recent study proposed a suitable design equation for the pull-through failures of thin steel roof battens. However, it was limited to static wind uplift loading. In contrast, most cyclone/storm events produce cyclic wind uplift forces on roofs for a significantly long period, thus causing premature fatigue pull-through failures at lower loads. Therefore, a series of constant amplitude cyclic load tests was conducted on small and full scale roof panels made of a commonly used industrial roof batten to develop their S-N curves. A series of multi-level cyclic tests, including the recently introduced low-high-low (LHL) fatigue loading test, was also undertaken to simulate a design cyclone. Using the S-N curves, the static pull-through design capacity equation was modified to include the effects of fatigue. Applicability of Miner’s rule was evaluated in order to predict the fatigue damage caused by multi-level cyclic tests such as the LHL test, and suitable modifications were made. The combined use of the modified Miner’s law and the S-N curve of roof battens will allow a conservative estimation of the fatigue design capacity of roof battens without conducting the LHL tests simulating a design cyclone. This paper presents the details of this study, and the results.

Rate capability of graphite materials as negative electrodes in lithium-ion capacitors

The lithium-ion exchange rate capability of various commercial graphite materials are evaluated using galvanostatic charge/discharge cycling in a half-cell configuration over a wide range of C-rates (0.1 similar to 60C). The results confirm that graphite is capable of de-intercalating stored charge at high rates, but has a poor intercalating rate capability. Decreasing the graphite coating thickness leads to a limited rate performance improvement of the electrode. Reducing the graphite particle size shows enhanced C-rate capability but with increased irreversible capacity loss (ICL). It is demonstrated that the rate of intercalation of lithium-ions into the graphite is significantly limited compared with the corresponding rate of de-intercalation at high C-rates. For the successful utilisation of commercially available conventional graphite as a negative electrode in a lithium-ion capacitor (LIC), its intercalation rate capability needs to be improved or oversized to accommodate high charge rates.

Measuring route passenger load diversity for capacity and quality of service assessment

This paper develops theory that quantifies transit route passenger-relative load factor and distinguishes it from occupancy load factor. The ratio between these measures is defined as the load diversity coefficient, which as a single measure characterizes the diversity of passenger load factor between route segments according to the origin-destination profile. The relationship between load diversity coefficient and route coefficient of variation in occupancy load factor is quantified. Two tables are provided that enhance passenger capacity and quality of service (QoS) assessment regarding onboard passenger load. The first expresses the transit operator’s perspective of load diversity and the passengers’ perspective of load factor relative to the operator’s, across six service levels corresponding to ranges of coefficient of variation in occupancy load factor. The second interprets the relationships between passenger average travel time and each of passenger-relative load factor and occupancy load factor. The application of this methodology is illustrated using a case study of a premium radial bus route in Brisbane, Australia. The methodology can assist in benchmarking and decision making regarding route and schedule design. Future research will apply value of time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent aboard. This would also assist in transit service quality econometric modeling.

Measuring route passenger load diversity for capacity and quality of service assessment

This poster introduces Passenger Relative Load Factor for a route or individual bus service as a capacity and quality of service measure, distinguishing it from Occupancy Load Factor. It introduces Load Diversity Coefficient as the ratio of Passenger Relative Load Factor to Occupancy Load Factor, and relates Load Diversity Coefficient to Coefficient of Variation in Occupancy Load Factor. It qualifies the operator’s and passengers’ perspectives of load factor based on Coefficient of Variation in Occupancy Load Factor along a route. A case study using weekday Automatic Fare Collection (AFC) data on a premium bus line in Brisbane, Australia illustrates the methodology. The compendium paper also qualifies the operator’s and passengers’ perspectives of these load factors along with Passengers’ Average Travel Time for capacity and quality of service assessment.

Building capacity for cancer nursing research and evidence based practice: The cancer nursing professorial precinct initiative

The demand for cancer care is growing due to the increasing incidence of cancer and the improved effectiveness of cancer treatments. It is important that cancer nurses continue to improve patient outcomes through research and the use of evidence in practice development, education and policy. This paper describes a case report of a collaborative academic healthcare model that creates capacity for cancer nursing research and evidence-based practice. The Cancer Nursing Professorial Precinct is a strategic collaboration between the Royal Brisbane and Women’s Hospital (RBWH) and Queensland University of Technology (QUT), in Brisbane Australia. The outcomes of this initiative has been remarkable. The principles and strategies used in this initiative may be useful for cancer services in other countries.

Leaders' personal wisdom and leader-member exchange quality: The role of individualized consideration

Business scholars have recently proposed that the virtue of personal wisdom may predict leadership behaviors and the quality of leader–follower relationships. This study investigated relationships among leaders’ personal wisdom—defined as the integration of advanced cognitive, reflective, and affective personality characteristics (Ardelt, Hum Dev 47:257–285, 2004)—transformational leadership behaviors, and leader–member exchange (LMX) quality. It was hypothesized that leaders’ personal wisdom positively predicts LMX quality and that intellectual stimulation and individualized consideration, two dimensions of transformational leadership, mediate this relationship. Data came from 75 religious leaders and 1–3 employees of each leader (N = 158). Results showed that leaders’ personal wisdom had a positive indirect effect on follower ratings of LMX quality through individualized consideration, even after controlling for Big Five personality traits, emotional intelligence, and narcissism. In contrast, intellectual stimulation and the other two dimensions of transformational leadership (idealized influence and inspirational motivation) did not mediate the positive relationship between leaders’ personal wisdom and LMX quality. Implications for future research on personal wisdom and leadership are discussed, and some tentative suggestions for leadership development are outlined.

Establishing the next generation at work: Leader generativity as a moderator of the relationships between leader age, leader-member exchange, and leadership success

In this study, the authors investigated leader generativity as a moderator of the relationships between leader age, leader-member exchange, and three criteria of leadership success (follower perceptions of leader effectiveness, follower satisfaction with leader, and follower extra effort). Data came from 128 university professors paired with one research assistant each. Results showed positive relationships between leader age and leader generativity, and negative relationships between leader age and follower perceptions of leader effectiveness and follower extra effort. Consistent with expectations based on leadership categorization theory, leader generativity moderated the relationships between leader age and all three criteria of leadership success, such that leaders high in generativity were better able to maintain high levels of leadership success at higher ages than leaders low in generativity. Finally, results of mediated moderation analyses showed that leader-member exchange quality mediated these moderating effects. The findings suggest that, in combination, leader age and the age-related construct of generativity importantly influence leadership processes and outcomes. © 2011 American Psychological Association.

Building local capacity to reduce road traffic injury in rapidly motorising countries

Road safety is a significant public health issue - 1.24m killed each year, 20-50m injured, 91% in rapidly motorising low/mid income countries Decade of Action for Road Safety 2011-2020: - National and local actions: “strengthening the management infrastructure and capacity for technical implementation of road safety activities at the national, regional and global levels” - Capacity as a constraint on a country’s action - Emphasis on knowledge/training – understand principles, promote training and education etc

Exploring changing culture and building capacity in research with consumers, carers and consumer companions

Background Australian policy mandates consumer and carer participation in mental health services at all levels including research. Inspired by a UK model - Service Users Group Advising on Research [SUGAR] - we conducted a scoping project in 2013 with a view to create a consumer and carer led research process that moves beyond stigma and tokenism, that values the unique knowledge of lived experience and leads to people being treated better when accessing services. This poster presents the initial findings. Aims The project’s purpose was to explore with consumers, consumer companions and carers at the Metro North Mental Health-RBWH their interest in and views about research partnerships with academic and clinical colleagues. Methods This poster overviews the initial findings from three audio-recorded focus groups conducted with a total of 14 consumers, carers and consumer companions at the Brisbane site. Analysis Our work was guided by framework analysis (Gale et al. 2013). It defines 5 steps for analysing narrative data: familiarising; development of categories; indexing; charting and interpretation. Eight main ideas were initially developed and were divided between the authors to further index. This process identified 37 related analytic ideas. The authors integrated these by combining, removing and redefining them by consensus though a mapping process. The final step is the return of the analysis to the participants for feedback and input into the interpretation of the focus group discussions. Results 1. Value & Respect: Feeling Valued & Respected, Tokenism, Stigma, Governance, Valuing prior knowledge / background 2. Pathways to Knowledge and Involvement in Research: ‘Where to begin’, Support, Unity & partnership, Communication, Co-ordination, Flexibility due to fluctuating capacity 3. Personal Context: Barriers regarding Commitments & the nature of mental illness, Wellbeing needs, Prior experience of research, Motivators, Attributes 4. What is research? Developing Knowledge, What to do research on, how and why? Conclusion and Discussion Initial analysis suggests that participants saw potential for ‘amazing things’ in mental health research such as reflecting their priorities and moving beyond stigma and tokenism. The main needs identified were education, mentoring, funding support and research processes that fitted consumers’ and carers’limitations and fluctuating capacities. They identified maintaining motivation and interest as an issue since research processes are often extended by ethics and funding applications. Participants felt that consumer and carer led research would value the unique knowledge that the lived experience of consumers and carers brings and lead to people being treated better when accessing services.

A systematic review of instruments for assessment of capacity in activities of daily living in children with developmental co-ordination disorder

Children with developmental co-ordination disorder (DCD) face evident motor difficulties in activities of daily living (ADL). Assessment of their capacity in ADL is essential for diagnosis and intervention, in order to limit the daily consequences of the disorder. The aim of this study is to systematically review potential instruments for standardized and objective assessment of children's capacity in ADL, suited for children with DCD. As a first step, databases of MEDLINE, EMBASE, CINAHL and PsycINFO were searched to identify studies that described instruments with potential for assessment of capacity in ADL. Second, instruments were included for review when two independent reviewers agreed that the instruments: (1) are standardized and objective; (2) assess at activity level and comprise items that reflect ADL, and; (3) are applicable to school-aged children that can move independently. Out of 1507 publications, 66 publications were selected, describing 39 instruments. Seven of these instruments were found to fulfil the criteria and were included for review: the Bruininks-Oseretsky Test of Motor Performance-2 (BOT2); the Do-Eat (Do-Eat); the Movement Assessment Battery for Children-2 (MABC2); the school-Assessment of Motor and Process Skills (schoolAMPS); the Tuffts Assessment of Motor Performance (TAMP); the Test of Gross Motor Development (TGMD); and the Functional Independence Measure for Children (WeeFIM). As a third step, for the included instruments, suitability for children with DCD was discussed based on the ADL comprised, ecological validity and other psychometric properties. We concluded that current instruments do not provide comprehensive and ecologically valid assessment of capacity in ADL as required for children with DCD.

Development and psychometric properties of the DCDDaily: a new test for clinical assessment of capacity in activities of daily living in children with developmental coordination disorder

Objective To develop the DCDDaily, an instrument for objective and standardized clinical assessment of capacity in activities of daily living (ADL) in children with developmental coordination disorder (DCD), and to investigate its usability, reliability, and validity. Subjects Five to eight-year-old children with and without DCD. Main measures The DCDDaily was developed based on thorough review of the literature and extensive expert involvement. To investigate the usability (assessment time and feasibility), reliability (internal consistency and repeatability), and validity (concurrent and discriminant validity) of the DCDDaily, children were assessed with the DCDDaily and the Movement Assessment Battery for Children-2 Test, and their parents filled in the Movement Assessment Battery for Children-2 Checklist and Developmental Coordination Disorder Questionnaire. Results 459 children were assessed (DCD group, n = 55; normative reference group, n = 404). Assessment was possible within 30 minutes and in any clinical setting. For internal consistency, Cronbach’s α = 0.83. Intraclass correlation = 0.87 for test–retest reliability and 0.89 for inter-rater reliability. Concurrent correlations with Movement Assessment Battery for Children-2 Test and questionnaires were ρ = −0.494, 0.239, and −0.284, p < 0.001. Discriminant validity measures showed significantly worse performance in the DCD group than in the control group (mean (SD) score 33 (5.6) versus 26 (4.3), p < 0.001). The area under curve characteristic = 0.872, sensitivity and specificity were 80%. Conclusions The DCDDaily is a valid and reliable instrument for clinical assessment of capacity in ADL, that is feasible for use in clinical practice.