A vibrational spectroscopic study of the phosphate mineral minyulite KAl2(OH,F)(PO4)2⋅4(H2O) and in comparison with wardite

Vibrational spectroscopy enables subtle details of the molecular structure of minyulite KAl2(OH,F)(PO4)2⋅4(H2O). Single crystals of a pure phase from a Brazilian pegmatite were used. Minyulite belongs to the orthorhombic crystal system. This indicates that it has three axes of unequal length, yet all are perpendicular to each other. The infrared and Raman spectroscopy were applied to compare the structure of minyulite with wardite. The reason for the comparison is that both are Al containing phosphate minerals. The Raman spectrum of minyulite shows an intense band at 1012 cm−1 assigned to the ν1PO43- symmetric stretching vibrations. A series of low intensity Raman bands at 1047, 1077, 1091 and 1105 cm−1 are assigned to the ν3PO43- antisymmetric stretching modes. The Raman bands at 1136, 1155, 1176 and 1190 cm−1 are assigned to AlOH deformation modes. The infrared band at 1014 cm−1 is ascribed to the PO43- ν1 symmetric stretching vibrational mode. The infrared bands at 1049, 1071, 1091 and 1123 cm−1 are attributed to the PO43- ν3 antisymmetric stretching vibrations. The infrared bands at 1123, 1146 and 1157 cm−1 are attributed to AlOH deformation modes. Raman bands at 575, 592, 606 and 628 cm−1 are assigned to the ν4 out of plane bending modes of the PO43- unit. In the 2600–3800 cm−1 spectral range, Raman bands for minyulite are found at 3661, 3669 and 3692 cm−1 are assigned to AlOH/AlF stretching vibrations. Broad infrared bands are also found at 2904, 3105, 3307, 3453 and 3523 cm−1. Raman bands at 3225, 3324 cm−1 are assigned to water stretching vibrations. A comparison is made with the vibrational spectra of wardite. Raman spectroscopy complimented with infrared spectroscopy has enabled aspects of the structure of minyulite to be ascertained and compared with that of other phosphate minerals.

The art of co-creative media : an Australian survey

This article describes how - in the processes of responding to participatory storytelling practices - community, public service, and to a lesser extent, commercial media institutions are themselves negotiated and changed. Although there are significant variations in the conditions, durability, extent, motivations and quality of these developments and their impacts, they nonetheless increase the possibilities and pathways of participatory media culture. This description first frames digital storytelling as a ‘co-creative’ media practice. It then discusses the role of community arts and cultural development (CACD) practitioners and networks as co-creative media intermediaries, and then considers their influence in Australian broadcast and Internet media. It looks at how participatory storytelling methods are evolving in the Australian context and explores some of the implications for cultural inclusion arising from a shared interest in ‘co-creative’ media methods and approaches.

Design, synthesis and spectroscopic characterisation of a focused library based on the polyandrocarpamine natural product scaffold

A focused library based on the marine natural products polyandrocarpamines A (1) and B (2) has been designed and synthesised using parallel solution-phase chemistry. In silico physicochemical property calculations were performed on synthetic candidates in order to optimise the library for drug discovery and chemical biology. A library of ten 2-aminoimidazolone products (3–12) was prepared by coupling glycocyamidine and a variety of aldehydes using a one-step stereoselective aldol condensation reaction under microwave conditions. All analogues were characterised by NMR, UV, IR and MS. The library was evaluated for cytotoxicity towards the prostate cancer cell lines, LNCaP, PC-3 and 22Rv1.

Australian Screen Producers Survey : online interactive

There is growing scholarly interest in the everyday work undertaken by screen producers in part prompted by disciplinary shifts (the ‘material turn’, the rise of creative industries research) and in part by major transformations in the business of media production and consumption in recent years. However, the production cultures and motivations of screen producers, particularly those working in emergent online and convergent media markets, remain poorly understood. The 2012 Australian Screen Producer survey, building upon research undertaken in the Australian Screen Content Producer Survey conducted in 2009, was a nation-wide survey-based study of screen content producers working in four industry segments: film, television, corporate and new media production. The broad objectives of the 2012 Australian Producer Survey study were to: • Provide deeper and more detailed analysis into the nature of digital media producers and their practices and how these findings compare to the practices of established screen media producers; • Interrogate issues around the pace of industry change, industry sentiment and how producers are adapting to a changing marketplace; and • Offer insight into the transitional pathways of established media producers into production for digital media markets. The Australian Screen Producer Survey Online Interactive provides users (principally filmmakers, scholars and policymakers) with direct access to raw survey data through an interactive website that allows them to customise queries according to particular interests. The Online Interactive therefore provides customisable findings – unlike ‘static’ research outputs – delineating the practices, attitudes, strategies, and aspirations of screen producers working in feature film, television and corporate production as well as those operating in an increasingly convergent digital media marketplace. The survey was developed by researchers at the ARC Centre of Excellence for Creative Industries and Innovation (CCI), Queensland University of Technology, Deakin University, the Centre for Screen Business at Australian Film Television and Radio School (AFTRS) and was undertaken in association with Bergent Research. The Online Interactive website (http://screenproducersurvey.com/) was developed with support from the Centre for Memory Imagination and Invention (CMII).

A vibrational spectroscopic study of the phosphate mineral whiteite CaMn++Mg2Al2(PO4)4(OH)2·8(H2O)

Vibrational spectroscopy enables subtle details of the molecular structure of whiteite to be determined. Single crystals of a pure phase from a Brazilian pegmatite were used. The infrared and Raman spectroscopy were applied to compare the molecular structure of whiteite with that of other phosphate minerals. The Raman spectrum of whiteite shows an intense band at 972 cm-1 assigned to the m1 PO3- 4 symmetric stretching vibrations. The low intensity Raman bands at 1076 and 1173 cm-1 are assigned to the m3 PO3- 4 antisymmetric stretching modes. The Raman bands at 1266, 1334 and 1368 cm-1 are assigned to AlOH deformation modes. The infrared band at 967 cm-1 is ascribed to the PO3- 4 m1 symmetric stretching vibrational mode. The infrared bands at 1024, 1072, 1089 and 1126 cm-1 are attributed to the PO3-4 m3 antisymmetric stretching vibrations. Raman bands at 553, 571 and 586 cm-1 are assigned to the m4 out of plane bending modes of the PO3- 4 unit. Raman bands at 432, 457, 479 and 500 cm-1 are attributed to the m2 PO4 and H2PO4 bending modes. In the 2600 to 3800 cm-1 spectral range, Raman bands for whiteite are found 3426, 3496 and 3552 cm-1 are assigned to AlOH stretching vibrations. Broad infrared bands are also found at 3186 cm-1. Raman bands at 2939 and 3220 cm-1 are assigned to water stretching vibrations. Raman spectroscopy complimented with infrared spectroscopy has enabled aspects of the structure of whiteite to be ascertained and compared with that of other phosphate minerals.

An international survey of daily disposable contact lens prescribing

Purpose The aim was to determine the extent of daily disposable contact lens prescribing worldwide and to characterise the associated demographics and fitting patterns. Methods Up to 1,000 survey forms were sent to contact lens fitters in up to 40 countries between January and March every year for five consecutive years (2007 to 2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Survey data collected since 1996 were also analysed for seven nations to assess daily disposable lens fitting trends since that time. Results Data were collected in relation to 97,289 soft lens fits, of which 23,445 (24.1 per cent) were with daily disposable lenses and 73,170 (75.9 per cent) were with reusable lenses. Daily disposable lens prescribing ranged from 0.6 per cent of all soft lenses in Nepal to 66.2 per cent in Qatar. Compared with reusable lens fittings, daily disposable lens fittings can be characterised as follows: older age (30.0 ± 12.5 versus 29.3 ± 12.3 years for reusable lenses); males are over-represented; a greater proportion of new fits versus refits; 85.9 per cent hydrogel; lower proportion of toric and presbyopia designs and a higher proportion of part-time wear. There has been a continuous increase in daily disposable lens prescribing between 1996 and 2011. The proportion of daily disposable lens fits (as a function of all soft lens fits) is positively related to the gross domestic product at purchasing power parity per capita (r2 = 0.55, F = 46.8, p < 0.0001). Conclusions The greater convenience and other benefits of daily disposable lenses have resulted in this modality capturing significant market share. The contact lens field appears to be heading toward a true single-use-only, disposable lens market.

International survey of rigid contact lens fitting

Purpose To determine the extent of rigid contact lens fitting worldwide and to characterize the associated demographics and fitting patterns. Methods Survey forms were sent to contact lens fitters in up to 40 countries between January and March every year for five consecutive years (2007 to 2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Survey data collected between 1996 and 2011 were also analyzed to assess rigid lens fitting trends in seven nations during this period. Results Data were obtained for 12,230 rigid and 100,670 soft lens fits between 2007 and 2011. Overall, rigid lenses represented 10.8% of all contact lens fits, ranging from 0.2% in Lithuania to 37% in Malaysia. Compared with soft lens fits, rigid lens fits can be characterized as follows: older age (rigid, 37.3 ± 15.0 years; soft, 29.8 ± 12.4 years); fewer spherical and toric fits; more bifocal/multifocal fits; less frequent replacement (rigid, 7%; soft, 85%); and less part-time wear (rigid, 4%; soft, 10%). High-Dk (contact lens oxygen permeability) (36%) and mid-Dk (42%) materials are predominantly used for rigid lens fitting. Orthokeratology represents 11.5% of rigid contact lens fits. There has been a steady decline in rigid lens fitting between 1996 and 2011. Conclusions Rigid contact lens prescribing is in decline but still represents approximately 10% of all contact lenses fitted worldwide. It is likely that rigid lenses will remain as a viable, albeit increasingly specialized, form of vision correction.

An international survey of toric contact lens prescribing

Objectives To characterize toric contact lens prescribing worldwide. Methods Up to 1,000 survey forms were sent to contact lens fitters in up to 39 countries between January and March every year for 5 consecutive years (2007–2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Only data for toric and spherical soft lens fits were analyzed. Survey data collected since 1996 were also analyzed for 7 nations to assess toric lens fitting trends since that time. Results Data were collected in relation to 21,150 toric fits (25%) and 62,150 spherical fits (75%). Toric prescribing ranged from 6% of lenses in Russia to 48% in Portugal. Compared with spherical fittings, toric fittings can be characterized as follows: older age (29.8 ± 11.4 years vs. 27.6 ± 10.8 years for spherical lenses); men are overrepresented (38% vs. 34%); greater proportion of new fits (39% vs. 32%); use of silicone hydrogel lenses (49% vs. 39%); and lower proportion of daily disposable lenses (14% vs. 28%). There has been a continuous increase in toric lens prescribing between 1996 and 2011. The proportion of toric lens fits was positively related to the gross domestic product at purchasing power parity per capita for year 2011 (r2 = 0.21; P=0.004). Conclusions At the present time, in the majority of countries surveyed, toric soft contact lens prescribing falls short of that required to correct clinically significant astigmatism (≥0.75 diopters) in all lens wearers.

Satisfaction survey for a medication management program : satisfaction guaranteed?

BACKGROUND Providing clinical pharmacy services to patients in their homes after discharge from hospital has been reported to reduce health care costs and improve outcomes. The Medication Management Program of the Fraser Health Authority involves pharmacists making home visits to provide clinical pharmacy services to elderly patients who have recently been discharged from hospital and others considered to be at high risk for adverse drug events. Although clinical and economic outcomes of this program have been evaluated, humanistic outcomes such as satisfaction have not been assessed. Moreover, very little evaluation of patient satisfaction with home pharmacy services has been reported in the literature. OBJECTIVE To evaluate patient satisfaction with the Medication Management Program. METHODS A telephone survey instrument, consisting of 7 Likert-scale items and 2 open-ended questions, was developed and administered to patients who received a home pharmacist visit between September 1 and November 23, 2011. In addition to the survey responses, demographic and clinical data for both respondents and nonrespondents were collected. RESULTS Of the 175 patients invited to participate in the survey, 103 (58.9%) agreed to participate. The majority of respondents agreed or strongly agreed with all of the survey items, indicating satisfaction with the program. For example, 97 (94%) agreed or strongly agreed that they would recommend the pharmacist home visit program continue to be available, and all 103 (100%) agreed or strongly agreed that they were satisfied with the pharmacist home visit. Respondents provided some suggestions for program improvement. CONCLUSIONS The survey findings demonstrate that patients were satisfied with the home clinical pharmacy services offered through the Fraser Health Medication Management Program.

Voltammetric, spectroscopic, and microscopic investigations of electrocrystallized forms of semiconducting AgTCNQ (TCNQ=7,7,8,8-tetracyanoquinodimethane) exhibiting different morphologies and colors

Chemically synthesized AgTCNQ exists in two forms that differ in their morphologies (needles and microcrystals) and colors (red and blue). It is now shown that both forms exhibit essentially indistinguishable X-ray diffraction, spectroscopic, and thermochemical data, implying that they are not separate phases, as implied in some literature. Electrochemical reduction of TCNQ((MeCN)) in the presence of Ag+((MeCN)) generates both red and blue AgTCNQ. On glassy carbon, platinum, or indium tin oxide electrodes and at relatively positive deposition potentials, slow growth of high aspect ratio, red needle AgTCNQ crystals occurs. After longer times and at more negative deposition potentials, blue microcrystalline AgTCNQ thin films are favored. Blue AgTCNQ is postulated to be generated via reduction of a Ag+\[(TCNQ(center dot-))(TCNQ)]((MeCN)) intermediate. At even more negative potentials, Ag-(metal) formation inhibits further growth of AgTCNQ. On a gold electrode, Ag-(metal)) deposition occurs at more positive potentials than on the other electrode materials examined. However, surface plasmon resonance data indicate (hat a small potential region is available between the stripping of Ag-(metal)) and the oxidation of TCNQ(center dot-)(MeCN) back to TCNQ(MeCN) where AgTCNQ may form. AgTCNQ in both the red and blue forms also can be prepared electrochemically on a TCNQ((s)) modified electrode in -0.1 M AgNO3(aq) where deposition of Ag(m,,,I) onto the TCNQ((s)) crystals allows a charge transfer process to occur. However, the morphology formed in this solid-solid phase transformation is more difficult to control.

Modeling perceived influences on journalism : evidence from a cross-national survey of journalists

Surveying 1,700 journalists from seventeen countries, this study investigates perceived influences on news work. Analysis reveals a dimensional structure of six distinct domains—political, economic, organizational, professional, and procedural influences, as well as reference groups. Across countries, these six dimensions build up a hierarchical structure where organizational, professional, and procedural influences are perceived as more powerful limits to journalists' work than political and economic influences.

Travel journalists’ attitudes toward public relations : findings from a representative survey

The impact of public relations on emerging fields such as travel journalism has not gained much attention, despite the broader growth of lifestyle journalism, and its particular dependence on PR. This study reports the findings of a representative survey of Australian travel journalists, focusing on their views of PR. Results show that travel journalists are wary of PR, although they believe they can be relatively immune from its influence and see some PR activities as quite useful. Cluster analysis identifies three distinct groups based on their views of PR, which range from a positive attitude to strong criticism. Their backgrounds and differences are explored, pointing to gender, job status, and background in mainstream journalism as main determinants for differences.

Journalists in times of change : Evidence from a new survey of Australia’s journalistic workforce

Studies of journalists’ professional views have a long history in many countries around the globe. This has been no less the case in Australia, where a number of surveys of journalists have been conducted, particularly in recent years. Yet, the only study so far able to lay claim to having studied a representative sample with a small error margin remains Henningham’s account of Australian journalists in the early 1990s. Clearly, Australian journalism has experienced a vast array of changes since that time, and it is crucial to provide a more up-to-date image of the profession. This study, based on telephone surveys with 605 Australian journalists, demonstrates some significant changes in the workforce. Journalists are now older, better educated, more experienced and arguably more left-leaning than 20 years ago. For the first time, women are in a majority, but are still disadvantaged. Journalists’ job satisfaction and ethical views are also discussed.

Australian journalism students' motivations and job expectations : evidence from a survey across six universities

The value of tertiary journalism education is an often hotly-debated topic among journalism educators and in the industry. Yet, the voices of students are often not heard in these debates. For example, we know relatively little about why young people actually decide to study journalism, what area of journalism they want to work in and what they are looking for in a job. To shed more light on the student perspective, this paper reports on a survey of 320 undergraduate journalism students at six Australian universities. The results show that only a minority actually want to work in news journalism, while most prefer entertainment-focussed areas. Students are motivated mainly by a love for writing and because they like journalism as a profession. In terms of job characteristics, they are particularly interested in their own career progression, but also in the extent to which they can provide a public service.