Integration of Geospatial and Built Environment - National Data Policy

Digital technology offers enormous benefits (economic, quality of design and efficiency in use) if adopted to implement integrated ways of representing the physical world in a digital form. When applied across the full extent of the built and natural world, it is referred to as the Digital Built Environment (DBE) and encompasses a wide range of approaches and technology initiatives, all aimed at the same end goal: the development of a virtual world that sufficiently mirrors the real world to form the basis for the smart cities of the present and future, enable efficient infrastructure design and programmed maintenance, and create a new foundation for economic growth and social well-being through evidence-based analysis. The creation of a National Data Policy for the DBE will facilitate the creation of additional high technology industries in Australia; provide Governments, industries and citizens with greater knowledge of the environments they occupy and plan; and offer citizen-driven innovations for the future. Australia has slipped behind other nations in the adoption and execution of Building Information Modelling (BIM) and the principal concern is that the gap is widening. Data driven innovation added $67 billion to the Australian economy in 20131. Strong open data policy equates to $16 billion in new value2. Australian Government initiatives such as the Digital Earth inspired “National Map” offer a platform and pathway to embrace the concept of a “BIM Globe”, while also leveraging unprecedented growth in open source / open data collaboration. Australia must address the challenges by learning from international experiences—most notably the UK and NZ—and mandate the use of BIM across Government, extending the Framework for Spatial Data Foundation to include the Built Environment as a theme and engaging collaboration through a “BIM globe” metaphor. This proposed DBE strategy will modernise the Australian urban planning and the construction industry. It will change the way we develop our cities by fundamentally altering the dynamics and behaviours of the supply chains and unlocking new and more efficient ways of collaborating at all stages of the project life-cycle. There are currently two major modelling approaches that contribute to the challenge of delivering the DBE. Though these collectively encompass many (often competing) approaches or proprietary software systems, all can be categorised as either: a spatial modelling approach, where the focus is generally on representing the elements that make up the world within their geographic context; and a construction modelling approach, where the focus is on models that support the life cycle management of the built environment. These two approaches have tended to evolve independently, addressing two broad industry sectors: the one concerned with understanding and managing global and regional aspects of the world that we inhabit, including disciplines concerned with climate, earth sciences, land ownership, urban and regional planning and infrastructure management; the other is concerned with planning, design, construction and operation of built facilities and includes architectural and engineering design, product manufacturing, construction, facility management and related disciplines (a process/technology commonly known as Building Information Modelling, BIM). The spatial industries have a strong voice in the development of public policy in Australia, while the construction sector, which in 2014 accounted for around 8.5% of Australia’s GDP3, has no single voice and because of its diversity, is struggling to adapt to and take advantage of the opportunity presented by these digital technologies. The experience in the UK over the past few years has demonstrated that government leadership is very effective in stimulating industry adoption of digital technologies by, on the one hand, mandating the use of BIM on public procurement projects while at the same time, providing comparatively modest funding to address the common issues that confront the industry in adopting that way of working across the supply chain. The reported result has been savings of £840m in construction costs in 2013/14 according to UK Cabinet Office figures4. There is worldwide recognition of the value of bringing these two modelling technologies together. Australia has the expertise to exercise leadership in this work, but it requires a commitment by government to recognise the importance of BIM as a companion methodology to the spatial technologies so that these two disciplinary domains can cooperate in the development of data policies and information exchange standards to smooth out common workflows. buildingSMART Australasia, SIBA and their academic partners have initiated this dialogue in Australia and wish to work collaboratively, with government support and leadership, to explore the opportunities open to us as we develop an Australasian Digital Built Environment. As part of that programme, we must develop and implement a strategy to accelerate the adoption of BIM processes across the Australian construction sector while at the same time, developing an integrated approach in concert with the spatial sector that will position Australia at the forefront of international best practice in this area. Australia and New Zealand cannot afford to be on the back foot as we face the challenges of rapid urbanisation and change in the global environment. Although we can identify some exemplary initiatives in this area, particularly in New Zealand in response to the need for more resilient urban development in the face of earthquake threats, there is still much that needs to be done. We are well situated in the Asian region to take a lead in this challenge, but we are at imminent risk of losing the initiative if we do not take action now. Strategic collaboration between Governments, Industry and Academia will create new jobs and wealth, with the potential, for example, to save around 20% on the delivery costs of new built assets, based on recent UK estimates.

A quantitative metric to identify critical elements within seafood supply networks

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

Introduction to "International Perspectives on Business Innovation and Disruption in the Creative Industries Film, Video and Photography"

The creative industries are particularly fecund empirical fields for investigating the processes of business innovation and disruption. The creative industries are some of the fastest growing sectors in many economies (European Commission, 2001; OECD, 2006; United States Census Bureau, 2010) and thus are worthy of study in their own right. Additionally, the study of the creative industries affords insights into how we understand the current economic transformation towards knowledge- based economies more broadly. The transformation toward knowledge- based economies has been foreshadowed by the transformation of creative industries such as publishing, film, video, photography, music and so on...

Narrative as a tool for critical reflective practice in the creative industries

This paper explores the efficacy of narrative in reflective practice across a range of creative disciplines. As practitioners within the creative industries the authors internalise experience and re-contextualise it as stories, designs, music videos, fiction and non-fiction films and dance. They are uniquely placed to examine narrative in critical reflection through the prism of their creative practice and in so doing offer insights into reconceptualising professional practice. The authors demonstrate how engagement with and reflection on and in their stories enables wider reflection. Their purpose in reflection is not just to learn from mistakes but to develop an epistemology of practice that enables them to apply rigorous academic inquiry to articulate their tacit professional knowledge and establish new methods for dealing with uncertainty in creative practice research.

Corporate Social Responsibility Assurance: Theory, Regulations and Practice in China

This chapter aims to provide a comprehensive understanding of the theory, regulations and practice of corporate social responsibility (CSR) assurance in China. Built on stakeholder and related theories, it employs a demand-and-supply analytical framework to illustrate the development and current status of China’s CSR assurance market. It finds that government agencies, stock exchanges, accounting standard setters and industrial associations have collectively shaped the current regulatory framework on CSR reporting and assurance in China. Regarding demand, differences in the social and legal environments across such a large country influence the regional development of CSR assurance. Industries under intensive CSR regulations and/or social reporting pressure—for example, the finance, aviation and mining industries—more actively achieve CSR report assurance. Regarding supply, the CSR assurance market in China is shared by accounting firms and professional certification bodies. Different assurance standards adopted by the two streams of assurance providers have different foci, potentially leading to different assurance coverage and emphases.

You're hot, then you're cold: Creative industries policy making in Australia

Much compelling evidence has emerged over the last two decades demonstrating the importance of Australia’s creative industries. In 2014, the Australian Bureau of Statistics confirmed that culture is ‘big business’ in this country. Yet despite this, interest by policy makers at all levels of government has been intermittent, at best. This chapter gives a brief history of policy development, and offers a number of reasons for why policy and politics have not focussed more resolutely on Australia’s creative economy. It finishes with a discussion of Australia’s ‘unfinished agenda’, one which demands attention not only by government, but also industry and higher education, if we are to properly meet both the challenges and opportunities before us.

Daybreakers

It is 2019, ten years after a plague turns most humans into vampires. Human blood is in short supply. The shortage of causing panic in vampire population Charles Bromley, CEO of pharmaceutic company Bromley Marks - the largest supplier of human blood in the United States- is intent on developing a viable blood substitute. When a cure that can transform vampires back into human...

Application of power electronics in improving power quality and supply efficiency of AC traction networks

Major advances in power electronics during recent years have prompted considerable interest within the traction community. The capability of new technologies to reduce the AC railway networks' effect on power quality and improve their supply efficiency is expected to significantly decrease the cost of electric rail supply systems. Of particular interest are Static Frequency Converter (SFC), Rail Power Conditioner (RPC), High Voltage Direct Current (HVDC) and Energy Storage Systems (ESS) solutions. Substantial impacts on future feasibility of railway electrification are anticipated. Aurizon, Australia's largest heavy haul railway operator, has recently commissioned the world's first 50Hz/50Hz SFC installation and is currently investigating SFC, RPC, HVDC and ESS solutions. This paper presents a summary of current and emerging technologies with a particular focus on the potential techno-economic benefits.

A decade of supply chain collaboration and directions for future research

Purpose This paper aims to conduct a systematic review of the literature on supply chain collaboration published over a 10-year period from 2005 to 2014. It explores the nature and extent of research undertaken to identify key themes emerging in the field and gaps that need to be addressed. Design/methodology/approach The authors review a sample of 207 articles from 69 journals, after using an iterative cycle of defining appropriate search keywords, searching the literature and conducting the analysis. Findings Key themes include the meaning of collaboration; considerations for supply chain collaboration theory; emerging areas in collaboration for sustainability, technology-enabled supply chains and humanitarian supply chains; and the need for a more holistic approach, multi-tier perspectives and research into B2C collaborations. Research limitations/implications The paper provides discussion and scope for future research into the area which would contribute to the field tremendously. Originality/value There have been very few reviews in the past on supply chain collaboration, and this is one of the first extensive reviews conducted to address how well the body of knowledge on supply chain collaboration corresponds with our contemporary society.

Design thinking pedagogy: The educational design ladder

As global industries change and technology advances, traditional education systems might no longer be able to supply companies with graduates who possess an appropriate mix of skills and experience. The recent increased interest in Design Thinking as an approach to innovation has resulted in its adoption by non-design-trained professionals. This development necessitates a new method of teaching Design Thinking and its related skills and processes. As a basis for such a method, this research investigated 51 selected courses across 28 international universities to determine what Design Thinking is being taught (content), and how it is being taught (assessment and learning modes). To support the teaching and assessment of Design Thinking, this paper presents The Educational Design Ladder, an innovative resource/model that provides a process for the organisation and structuring of units for a multidisciplinary Design Thinking programme.

Submission to the Senate Economics References Committee Inquiry into affordable housing 20 August 2014: De-risking development of medium density housing to improve housing affordability and boost supply

This submission addresses the problem of housing price inflation, the chronic under-supply of new housing stock, and the resultant decline in housing affordability for low and middle income households. It specifically focusses on the supply of medium density housing (multi-unit development) in Melbourne, although we believe that the observations made about housing in supply in Melbourne are relevant in other urban centres and to other types of housing supply. In terms of medium density housing (MDH) our concern also extends to the poor quality and design. Why the market tends to deliver generic apartments of poor quality and design which are uncompetitive with lower density housing and amenity despite planning objectives, and how this apparently intractable problem can be overcome is the topic of this submission...

Smarten up! Applying market design theory to housing supply

PROBLEM Cost of delivering medium density apartments impedes supply of new and more affordable housing in established suburbs EXISTING FOCUS - Planning controls - Construction costs, esp labour - Regulation eg sustainability

Key change: The role of the creative industries in climate change action

The role of the creative industries – arts and artists – in helping to drive the changes in laws and behaviours that are necessary to tackle climate change, while not superficially obvious, is a deep one. Arts and artists of all kinds, as cultural practitioners, have been closely entwined with social change and social control since time immemorial, in large part because they help shape our understanding of the world, framing ideas, prefiguring change, and opening hearts and minds to new ways of thinking. They have played a major role in campaigns for law reform on many issues, and climate change should be no exception. Indeed, with climate change increasingly being seen as a deeply cultural issue, and its solutions as cultural ones to do with changing the way we understand our world and our place in it, the role of cultural practitioners in helping to address it should also increasingly be seen as central. It is curious, then, how comparatively little artistic engagement with climate change has taken place, how little engagement with the arts the climate movement has attempted, and how little theoretical and critical analysis has been undertaken on the role of the creative arts in climate change action. Through a literature review and a series of interviews with individuals working in relevant fields in Australia, this study examines and evaluates the role of the creative industries in climate change action and places it in a historical and theoretical context. It covers examples of the kind of artistic and activist collaborations that have been undertaken, the different roles in communication, campaigning for law reform, and deep culture change that arts and artists can play, and the risks and dangers inherent in the involvement of artists, both to climate change action and to the artist. It concludes that, despite the risks, a deeper and more thoughtful engagement of and by the creative industries in climate action would not only be useful but is perhaps vital to the success of the endeavours.

Resolution of Cryptic Species Complexes of Tephritid Pests to Enhance SIT Application and Facilitate International Trade

Tephritid fruit flies (Diptera: Tephritidae) are considered by far the most important group of horticultural pests worldwide. Female fruit flies lay eggs directly into ripening fruit, where the maggots feed causing fruit loss. Each and every continent is plagued by a number of fruit fly pests, both indigenous as well as invasive ones, causing tremendous economic losses. In addition to the direct losses through damage, they can negatively impact commodity trade through restrictions to market access. The quarantine and regulatory controls put in place to manage them are expensive, while the on-farm control costs and loss of crop affect the general well-being of growers. These constraints can have huge implications on loss in revenues and limitations to developing fruit and vegetable-based agroindustries in developing, emergent and developed nations. Because fruit flies are a global problem, the study of their biology and management requires significant international attention to overcome the hurdles they pose. The Joint Food and Agriculture Organisation / International Atomic Energy Agency (FAO/IAEA) Programme on Nuclear Techniques in Food and Agriculture has been on the foreground in assisting Member States in developing and validating environment-friendly fruit fly suppression systems to support viable fresh fruit and vegetable production and export industries. Such international attention has resulted in the successful development and validation of a Sterile Insect Technique (SIT) package for the Mediterranean fruit fly. Although demands for R&D support with respect to Mediterranean fruit fly are diminishing due to successful integration of this package into sustainable control programmes against this pest in many countries, there were increasing demands from Member States in Africa, Asia and Latin America, to address other major fruit fly pests and a related, but sometimes neglected issue of tephritid species complexes of economic importance. Any research, whether it is basic or applied, requires a taxonomic framework that provides reliable and universally recognized entities and names. Among the currently recognized major fruit fly pests, there are groups of species whose morphology is very similar or identical, but biologically they are distinct species. As such, some insect populations that are grouped taxonomically within the same pest species, display different biological and genetic traits and show reproductive isolation which suggest that they are different species. On the other hand, different species may have been taxonomically described, but there may be doubt as to whether they actually represent distinct biological species or merely geographical variants of the same species. This uncertain taxonomic status has practical implications on the effective development and use of the SIT against such complexes, particularly at the time of determining which species to mass-rear, and significantly affects international movement of fruit and vegetables through the establishment of trade barriers to important agricultural commodities which are hosts to these pest tephritid species...