Exploiting Web 2.0 technologies to forge live connectedness in class

The economics of supporting learning has seen institutional encouragement of a wide range of blended learning initiatives in face to face and online teaching and learning. This has become one of the key drivers for the adoption of technology in teaching, in a manner occassionally guilty of putting the cart before the horse. Learning spaces are increasingly equipped with a dizzying array of technological options testifying to institutional and governmental investment and commitment in supporting face to face blended learning (QUT, 2011, C/4.2). Yet innovation within traditional learning and teaching models faces a number of challenges both at an institutional level and at the teaching coal face. Web 2.0 technologies present a vast array of opportunities to harness and capture the attention of students in engaging learning opportunitites. This presentation will explore technologies supportive of active learning pedagogies.

Physical activity patterns among South-Asian adults : a systematic review

Physical activity (PA) has many beneficial physical and mental health effects. Physical inactivity is considered the fourth leading risk factor for global mortality. At present there are no systematic reviews on PA patterns among South Asian adults residing in the region. The present study aims to systematically evaluate studies on PA patterns in South Asian countries. A five-staged comprehensive search of the literature was conducted in Medline, Web of Science and SciVerse Scopus using keywords ‘Exercise’, ‘Walking’, ‘Physical activity’, ‘Inactivity’, ‘Physical Activity Questionnaire’, ‘International Physical Activity Questionnaire’, ‘IPAQ’, ‘Global Physical Activity Questionnaire’ and ‘GPAQ’, combined with individual country names. The search was restricted to English language articles conducted in humans and published before 31st December 2012. To obtain additional data a manual search of the reference lists of articles was performed. Data were also retrieved from the search of relevant web sites and online resources. The total number of hits obtained from the initial search was 1,771. The total number of research articles included in the present review is eleven (India-8, Sri Lanka-2, Pakistan-1). In addition, eleven country reports (Nepal-3, Bangladesh-2, India-2, Sri Lanka-2, Bhutan-1, Maldives-1) of World Health Organization STEPS survey from the South-Asian countries were retrieved online. In the research articles the overall prevalence of inactivity was as follows; India (18.5%-88.4%), Pakistan (60.1%) and Sri Lanka (11.0%-31.8%). STEPS survey reports were available from all countries except Pakistan. Overall in majority of STEPS surveys females were more inactive compared to males. Furthermore, leisure related inactivity was >75% in studies reporting inactivity in this domain and people were more active in transport domain when compared with the other domains. In conclusion, our results show that there is a wide variation in the prevalence of physical inactivity among South-Asian adults within and between countries. Furthermore, physical inactivity in South Asian adults was associated with several socio-demographic characteristics. Majority of South Asian adults were inactive during their leisure time. These Factors need to be considered when planning future interventions and research aimed at improving PA in the region.

"You’ve modelled and now what?" : Exploring determinants of process model re-use

Business process modelling as a practice and research field has received great attention over recent years. Organizations invest significantly into process modelling in terms of training, tools, capabilities and resources. The return on this investment is a function of process model re-use, which we define as the recurring use of process models to support organizational work tasks. While prior research has examined re-use as a design principle, we explore re-use as a behaviour, because evidence suggest that analysts’ re-use of process models is indeed limited. In this paper we develop a two-stage conceptualization of the key object-, behaviour- and socioorganization-centric factors explaining process model re-use behaviour. We propose a theoretical model and detail implications for its operationalization and measurement. Our study can provide significant benefits to our understanding of process modelling and process model use as key practices in analysis and design.

Not losing the plot : creating, collecting and curating qualitative data through a web-based application

Collecting regular personal reflections from first year teachers in rural and remote schools is challenging as they are busily absorbed in their practice, and separated from each other and the researchers by thousands of kilometres. In response, an innovative web-based solution was designed to both collect data and be a responsive support system for early career teachers as they came to terms with their new professional identities within rural and remote school settings. Using an emailed link to a web-based application named goingok.com, the participants are charting their first year plotlines using a sliding scale from ‘distressed’, ‘ok’ to ‘soaring’ and describing their self-assessment in short descriptive posts. These reflections are visible to the participants as a developing online journal, while the collections of de-identified developing plotlines are visible to the research team, alongside numerical data. This paper explores important aspects of the design process, together with the challenges and opportunities encountered in its implementation. A number of the key considerations for choosing to develop a web application for data collection are initially identified, and the resultant application features and scope are then examined. Examples are then provided about how a responsive software development approach can be part of a supportive feedback loop for participants while being an effective data collection process. Opportunities for further development are also suggested with projected implications for future research.

Honeycomb nanogold networks with highly active sites

The formation of macroporous honeycomb gold using an electrochemically generated hydrogen bubble template is described. The synthesis procedure induces the formation of highly active surfaces with enhanced electrocatalytic and surface enhanced Raman scattering properties.

Formation of nanostructured porous Cu-Au surfaces : the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu–Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu2O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu–Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Decoration of active sites to create bimetallic surfaces and its implication for electrochemical processes

The creation of electrocatalysts based on noble metals has received a significant amount of research interest due to their extensive use as fuel cell catalysts and electrochemical sensors. There have been many attempts to improve the activity of these metals through creating nanostructures, as well as post-synthesis treatments based on chemical, electrochemical, sonochemical and thermal approaches. In many instances these methods result in a material with active surface states, which can be considered to be adatoms or clusters of atoms on the surface that have a low lattice co-ordination number making them more prone to electrochemical oxidation at a wide range of potentials that are significantly less positive than those of their bulk metal counterparts. This phenomenon has been termed pre-monolayer oxidation and has been reported to occur on a range of metallic surfaces. In this work we present findings on the presence of active sites on Pd that has been: evaporated as a thin film; electrodeposited as nanostructures; as well as commercially available Pd nanoparticles supported on carbon. Significantly, advantage is taken of the low oxidation potential of these active sites whereby bimetallic surfaces are created by the spontaneous deposition of Ag from AgNO3 to generate Pd/Ag surfaces. Interestingly this approach does not increase the surface area of the original metal but has significant implications for its further use as an electrode material. It results in the inhibition or promotion of electrocatalytic activity which is highly dependent on the reaction of interest. As a general approach the decoration of active catalytic materials with less active metals for a particular reaction also opens up the possibility of investigating the role of the initially present active sites on the surface and identifying the degree to which they are responsible for electrocatalytic activity.

Finite element analysis of hollow flange beams with web stiffeners

A new cold-formed and resistance welded section known as the Hollow Flange Beam (HFB) has been developed recently in Australia. In contrast to the common lateral torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral distortional buckling mode of failure involving lateral deflection, twist, and cross-section change due to web distortion. This lateral distortional buckling behavior has been shown to cause significant reduction of the available flexural capacity of HFBs. An investigation using finite element analyses and large scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the finite element model and analytical results. The experimental procedure and results are outlined in a companion paper at this conference.

Buckling experiments on hollow flange beams with web stiffeners

A new cold-formed and resistance welded section known as the Hollow Flange Beam (HFB) has been developed recently in Australia. In contrast to the common lateral torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral distortional buckling mode of failure involving lateral deflection, twist and cross-section change due to web distortion. This lateral distortional buckling behaviour has been shown to cause significant reduction of the available flexural strength of HFBs. An investigation using finite element analyses and large scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the experimental investigation, the results, and the final stiffener arrangement whereas the details of the finite element analyses are presented in a companion paper at this conference.

Finite-element analysis of hollow flange beams with web stiffeners

A new cold-formed and resistance-welded section known as the hollow flange beam (HFB) has been developed recently in Australia. In contrast to the common lateral-torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral-distortional buckling mode of failure involving lateral deflection, twist, and cross-section change due to web distortion. This lateral-distortional buckling behavior has been shown to cause significant reduction of the available flexural capacity of HFBs. An investigation using finite-element analyses and large-scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the finite-element model and analytical results. The experimental procedure and results are outlined in a companion paper.

Buckling experiments on hollow flange beams with web stiffeners

The hollow flange beam (HFB) is a new cold-formed and resistance-welded section developed in Australia. Due to its unique geometry comprising two stiff triangular flanges and a slender web, the HFB is susceptible to a lateral-distortional buckling mode of failure involving web distortion. Investigation using finite-element analyses showed that the use of transverse web plate stiffeners effectively eliminated lateral-distortional buckling of HFBs and thus any associated reduction in flexural capacity. A detailed experimental investigation was then carried out to validate the results from the finite-element analysis and to improve the stiffener configuration further. This led to the development of a special stiffener that is screw-fastened to the flanges on alternate sides of the web. This paper presents the details of the experimental investigations, the results, and the final stiffener arrangement whereas the details of the finite-element analyses are presented in a companion paper.

Shear capacity of lipped channel beams with web openings : design rules and improvements

Cold-formed steel Lipped Channel Beams (LCB) with web openings are commonly used as floor joists and bearers in building structures. Shear behaviour of these beams is more complicated and their shear capacities are considerably reduced by the presence of web openings. Hence detailed numerical and experimental studies of simply supported LCBs under a mid-span load with aspect ratios of 1.0 and 1.5 were undertaken to investigate the shear behaviour and strength of LCBs with web openings. Experimental and numerical results showed that the current design rules in cold-formed steel structures design codes are very conservative. Improved design equations were therefore proposed for the shear strength of LCBs with web openings based on both experimental and numerical results. This research showed a significant reduction in shear capacities of LCBs when large web openings are included for the purpose of locating building services. A cost effective method of eliminating such detrimental effects of large circular web openings was also therefore investigated using experimental and numerical studies. For this purpose LCBS were reinforced using plate, stud, transverse and sleeve stiffeners with varying sizes and thicknesses that were welded and screw-fastened to the web of LCBs. These studies showed that plate stiffeners were the most suitable. Suitable screw-fastened plate stiffener arrangements with optimum thicknesses were then proposed for LCBs with web openings to restore their original shear capacities. This paper presents the details of finite element analyses and experiments of LCBs with web openings in shear, and the development of improved shear design rules. It then describes the experimental and numerical studies to determine the optimum plate stiffener arrangements and the results. The proposed shear design rules in this paper can be considered for inclusion in the future versions of cold-formed steel design codes.

The multi-platform user engagement and data visualisation tool

The ability to identify and assess user engagement with transmedia productions is vital to the success of individual projects and the sustainability of this mode of media production as a whole. It is essential that industry players have access to tools and methodologies that offer the most complete and accurate picture of how audiences/users engage with their productions and which assets generate the most valuable returns of investment. Drawing upon research conducted with Hoodlum Entertainment, a Brisbane-based transmedia producer, this project involved an initial assessment of the way engagement tends to be understood, why standard web analytics tools are ill-suited to measuring it, how a customised tool could offer solutions, and why this question of measuring engagement is so vital to the future of transmedia as a sustainable industry. Working with data provided by Hoodlum Entertainment and Foxtel Marketing, the outcome of the study was a prototype for a custom data visualisation tool that allowed access, manipulation and presentation of user engagement data, both historic and predictive. The prototyped interfaces demonstrate how the visualization tool would collect and organise data specific to multiplatform projects by aggregating data across a number of platform reporting tools. Such a tool is designed to encompass not only platforms developed by the transmedia producer but also sites developed by fans. This visualisation tool accounted for multiplatform experience projects whose top level is comprised of people, platforms and content. People include characters, actors, audience, distributors and creators. Platforms include television, Facebook and other relevant social networks, literature, cinema and other media that might be included in the multiplatform experience. Content refers to discreet media texts employed within the platform, such as tweet, a You Tube video, a Facebook post, an email, a television episode, etc. Core content is produced by the creators’ multiplatform experiences to advance the narrative, while complimentary content generated by audience members offers further contributions to the experience. Equally important is the timing with which the components of the experience are introduced and how they interact with and impact upon each other. Being able to combine, filter and sort these elements in multiple ways we can better understand the value of certain components of a project. It also offers insights into the relationship between the timing of the release of components and user activity associated with them, which further highlights the efficacy (or, indeed, failure) of assets as catalysts for engagement. In collaboration with Hoodlum we have developed a number of design scenarios experimenting with the ways in which data can be visualised and manipulated to tell a more refined story about the value of user engagement with certain project components and activities. This experimentation will serve as the basis for future research.

Enterprise social networks : a business model perspective

Enterprise Social Networks continue to be adopted by organisations looking to increase collaboration between employees, customers and industry partners. Offering a varied range of features and functionality, this technology can be distinguished by the underlying business models that providers of this software deploy. This study identifies and describes the different business models through an analysis of leading Enterprise Social Networks: Yammer, Chatter, SharePoint, Connections, Jive, Facebook and Twitter. A key contribution of this research is the identification of consumer and corporate models as extreme approaches. These findings align well with research on the adoption of Enterprise Social Networks that has discussed bottom-up and top-down approaches. Of specific interest are hybrid models that wrap a corporate model within a consumer model and may, therefore, provide synergies on both models. From a broader perspective, this can be seen as the merging of the corporate and consumer markets for IT products and services.

Software as a service (SaaS) for small and medium enterprises (SMEs) : the role of intermediaries

Software as a Service (SaaS) is anticipated to provide significant benefits to small and medium enterprises (SMEs) due to ease of access to high-end applications, 7*24 availability, utility pricing, etc. However, underlying SaaS is the assumption that SMEs will directly interact with the SaaS vendor and use a self-service model. In practice, we see the rise of SaaS intermediaries who support SMEs with using SaaS. This paper reports on an empirical study of the role of intermediaries in terms of how they support SMEs in sourcing and leveraging SaaS for their business. The knowledge contributions of this paper are: (1) the identification and description of the role of SaaS intermediaries and (2) the specification of different roles of SaaS intermediaries, in particular a more basic role with technology orientation and operational alignment perspective and (3) a more added value role with customer orientation and strategic alignment perspective.