Fixed failure rate ambiguity validation methods for GPS and compass

Ambiguity resolution plays a crucial role in real time kinematic GNSS positioning which gives centimetre precision positioning results if all the ambiguities in each epoch are correctly fixed to integers. However, the incorrectly fixed ambiguities can result in large positioning offset up to several meters without notice. Hence, ambiguity validation is essential to control the ambiguity resolution quality. Currently, the most popular ambiguity validation is ratio test. The criterion of ratio test is often empirically determined. Empirically determined criterion can be dangerous, because a fixed criterion cannot fit all scenarios and does not directly control the ambiguity resolution risk. In practice, depending on the underlying model strength, the ratio test criterion can be too conservative for some model and becomes too risky for others. A more rational test method is to determine the criterion according to the underlying model and user requirement. Miss-detected incorrect integers will lead to a hazardous result, which should be strictly controlled. In ambiguity resolution miss-detected rate is often known as failure rate. In this paper, a fixed failure rate ratio test method is presented and applied in analysis of GPS and Compass positioning scenarios. A fixed failure rate approach is derived from the integer aperture estimation theory, which is theoretically rigorous. The criteria table for ratio test is computed based on extensive data simulations in the approach. The real-time users can determine the ratio test criterion by looking up the criteria table. This method has been applied in medium distance GPS ambiguity resolution but multi-constellation and high dimensional scenarios haven't been discussed so far. In this paper, a general ambiguity validation model is derived based on hypothesis test theory, and fixed failure rate approach is introduced, especially the relationship between ratio test threshold and failure rate is examined. In the last, Factors that influence fixed failure rate approach ratio test threshold is discussed according to extensive data simulation. The result shows that fixed failure rate approach is a more reasonable ambiguity validation method with proper stochastic model.

A systematic review of the literature comparing the practices of dispensing and non-dispensing doctors

Objectives: Some doctors perform the dual roles of prescribing and dispensing pharmaceuticals. The dispensing doctors (DDs) role may give rise to prescribing behaviours that vary from those of non-DDs. The aim of this review was to systematically and comparatively appraise the research evidence related to the practices of DDs. Methods: A systematic search of bibliographic databases and reference lists from selected papers were the sources of the data. Inclusion criteria were papers published in English, between 1970 and 2008 that provided quantitative data comparing the practices of DDs and non-DDs. At least two of the authors abstracted data from all eligible papers using a purpose-made data extraction form. Results: Twenty-one papers were included in this review. Evidence indicated that DDs prescribed more pharmaceutical items and less often generically than non-DDs. There was limited evidence to suggest that DDs prescribed less judiciously and were associated with poor dispensing standards. Patient convenience and access to pharmaceuticals were main reasons for doctors to dispense. Conclusion: DDs can fill an important gap in the provision of pharmaceuticals for their patients especially where health workforce shortages exist. There was evidence the dispensing role influenced prescribing. Patient convenience should be balanced against scarce medical resources, being utilised for dispensing.

Capitalising on mixed methods research : design, examples, and practice

Overview: - Development of mixed methods research - Benefits and challenges of “mixing” - Different models - Good design - Two examples - How to report? - Have a go!

The Tashi project 2004-2010 : developing methods for creating theatre works that fully engage children aged between 3 and 10

Over a seven-year period, Mark Radvan directed a suite of children’s theatre productions adapted from the original Tashi stories by Australian writers Anna and Barbara Fienberg. The Tashi Project’s repertoire of plays performed to over 40,000 children aged between 3 and 10 years old, and their carers, in seasons at the Out of the Box Festival, at Brisbane Powerhouse and in venues across Australia in two interstate tours in 2009 and 2010. The project investigated how best to combine an exploration of theatrical forms and conventions, with a performance style evolved in a specially developed training program and a deliberate positioning of young children as audiences capable of sophisticated readings of action, symbol, theme and character. The results of this project show that when brought into appropriate relationship with the theatre artists, young children aged 3-5 can engage with sophisticated narrative forms, and with the right contextual framing they enjoy heightened dramatic and emotional tension, bringing to the event sustained and highly engaged concentration. Older children aged 6-10 also bring sustained and heightened engagement to the same stories, providing that other more sophisticated dramatic elements are woven into the construction of the performances, such as character, theme and style.

The use of electronic portal imaging to verify patient position during intensity-modulated radiotherapy delivered by the dynamic MLC technique

Purpose: The precise shape of the three-dimensional dose distributions created by intensity-modulated radiotherapy means that the verification of patient position and setup is crucial to the outcome of the treatment. In this paper, we investigate and compare the use of two different image calibration procedures that allow extraction of patient anatomy from measured electronic portal images of intensity-modulated treatment beams. Methods and Materials: Electronic portal images of the intensity-modulated treatment beam delivered using the dynamic multileaf collimator technique were acquired. The images were formed by measuring a series of frames or segments throughout the delivery of the beams. The frames were then summed to produce an integrated portal image of the delivered beam. Two different methods for calibrating the integrated image were investigated with the aim of removing the intensity modulations of the beam. The first involved a simple point-by-point division of the integrated image by a single calibration image of the intensity-modulated beam delivered to a homogeneous polymethyl methacrylate (PMMA) phantom. The second calibration method is known as the quadratic calibration method and required a series of calibration images of the intensity-modulated beam delivered to different thicknesses of homogeneous PMMA blocks. Measurements were made using two different detector systems: a Varian amorphous silicon flat-panel imager and a Theraview camera-based system. The methods were tested first using a contrast phantom before images were acquired of intensity-modulated radiotherapy treatment delivered to the prostate and pelvic nodes of cancer patients at the Royal Marsden Hospital. Results: The results indicate that the calibration methods can be used to remove the intensity modulations of the beam, making it possible to see the outlines of bony anatomy that could be used for patient position verification. This was shown for both posterior and lateral delivered fields. Conclusions: Very little difference between the two calibration methods was observed, so the simpler division method, requiring only the single extra calibration measurement and much simpler computation, was the favored method. This new method could provide a complementary tool to existing position verification methods, and it has the advantage that it is completely passive, requiring no further dose to the patient and using only the treatment fields.

Robust image hash functions using higher order spectra

Robust hashing is an emerging field that can be used to hash certain data types in applications unsuitable for traditional cryptographic hashing methods. Traditional hashing functions have been used extensively for data/message integrity, data/message authentication, efficient file identification and password verification. These applications are possible because the hashing process is compressive, allowing for efficient comparisons in the hash domain but non-invertible meaning hashes can be used without revealing the original data. These techniques were developed with deterministic (non-changing) inputs such as files and passwords. For such data types a 1-bit or one character change can be significant, as a result the hashing process is sensitive to any change in the input. Unfortunately, there are certain applications where input data are not perfectly deterministic and minor changes cannot be avoided. Digital images and biometric features are two types of data where such changes exist but do not alter the meaning or appearance of the input. For such data types cryptographic hash functions cannot be usefully applied. In light of this, robust hashing has been developed as an alternative to cryptographic hashing and is designed to be robust to minor changes in the input. Although similar in name, robust hashing is fundamentally different from cryptographic hashing. Current robust hashing techniques are not based on cryptographic methods, but instead on pattern recognition techniques. Modern robust hashing algorithms consist of feature extraction followed by a randomization stage that introduces non-invertibility and compression, followed by quantization and binary encoding to produce a binary hash output. In order to preserve robustness of the extracted features, most randomization methods are linear and this is detrimental to the security aspects required of hash functions. Furthermore, the quantization and encoding stages used to binarize real-valued features requires the learning of appropriate quantization thresholds. How these thresholds are learnt has an important effect on hashing accuracy and the mere presence of such thresholds are a source of information leakage that can reduce hashing security. This dissertation outlines a systematic investigation of the quantization and encoding stages of robust hash functions. While existing literature has focused on the importance of quantization scheme, this research is the first to emphasise the importance of the quantizer training on both hashing accuracy and hashing security. The quantizer training process is presented in a statistical framework which allows a theoretical analysis of the effects of quantizer training on hashing performance. This is experimentally verified using a number of baseline robust image hashing algorithms over a large database of real world images. This dissertation also proposes a new randomization method for robust image hashing based on Higher Order Spectra (HOS) and Radon projections. The method is non-linear and this is an essential requirement for non-invertibility. The method is also designed to produce features more suited for quantization and encoding. The system can operate without the need for quantizer training, is more easily encoded and displays improved hashing performance when compared to existing robust image hashing algorithms. The dissertation also shows how the HOS method can be adapted to work with biometric features obtained from 2D and 3D face images.

Nuclear instruments and methods in physics research section B : beam interactions with materials and atoms

The impact-induced deposition of Al13 clusters with icosahedral structure on Ni(0 0 1) surface was studied by molecular dynamics (MD) simulation using Finnis–Sinclair potentials. The incident kinetic energy (Ein) ranged from 0.01 to 30 eV per atom. The structural and dynamical properties of Al clusters on Ni surfaces were found to be strongly dependent on the impact energy. At much lower energy, the Al cluster deposited on the surface as a bulk molecule. However, the original icosahedral structure was transformed to the fcc-like one due to the interaction and the structure mismatch between the Al cluster and Ni surface. With increasing the impinging energy, the cluster was deformed severely when it contacted the substrate, and then broken up due to dense collision cascade. The cluster atoms spread on the surface at last. When the impact energy was higher than 11 eV, the defects, such as Al substitutions and Ni ejections, were observed. The simulation indicated that there exists an optimum energy range, which is suitable for Al epitaxial growth in layer by layer. In addition, at higher impinging energy, the atomic exchange between Al and Ni atoms will be favourable to surface alloying.

Comparing and complementing methods : traditional market research vs. deep customer insights

Quantitative market data has traditionally been used throughout marketing and business as a tool to inform and direct design decisions. However, in our changing economic climate, businesses need to innovate and create products their customers will love. Deep customer insight methods move beyond just questioning customers and aims to provoke true emotional responses in order to reveal new opportunities that go beyond functional product requirements. This paper explores traditional market research methods and compares them to methods used to gain deep customer insights. This study reports on a collaborative research project with seven small to medium enterprises and four multi-national organisations. Firms were introduced to a design led innovation approach, and were taught the different methods to gain deep customer insights. Interviews were conducted to understand the experience and outcomes of pre-existing research methods and deep customer insight approaches. Findings concluded that deep customer insights were unlikely to be revealed through traditional market research techniques. The theoretical outcome of this study is a complementary methods matrix, providing guidance on appropriate research methods in accordance to a project’s timeline.

Nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory : a mixed methods study

The cardiac catheterisation laboratory (CCL) is a specialised medical radiology facility where both chronic-stable and life-threatening cardiovascular illness is evaluated and treated. Although there are many potential sources of discomfort and distress associated with procedures performed in the CCL, a general anaesthetic is not usually required. For this reason, an anaesthetist is not routinely assigned to the CCL. Instead, to manage pain, discomfort and anxiety during the procedure, nurses administer a combination of sedative and analgesic medications according to direction from the cardiologist performing the procedure. This practice is referred to as nurse-administered procedural sedation and analgesia (PSA). While anecdotal evidence suggested that nurse-administered PSA was commonly used in the CCL, it was clear from the limited information available that current nurse-led PSA administration and monitoring practices varied and that there was contention around some aspects of practice including the type of medications that were suitable to be used and the depth of sedation that could be safely induced without an anaesthetist present. The overall aim of the program of research presented in this thesis was to establish an evidence base for nurse-led sedation practices in the CCL context. A sequential mixed methods design was used over three phases. The objective of the first phase was to appraise the existing evidence for nurse-administered PSA in the CCL. Two studies were conducted. The first study was an integrative review of empirical research studies and clinical practice guidelines focused on nurse-administered PSA in the CCL as well as in other similar procedural settings. This was the first review to systematically appraise the available evidence supporting the use of nurse-administered PSA in the CCL. A major finding was that, overall, nurse-administered PSA in the CCL was generally deemed to be safe. However, it was concluded from the analysis of the studies and the guidelines that were included in the review, that the management of sedation in the CCL was impacted by a variety of contextual factors including local hospital policy, workforce constraints and cardiologists’ preferences for the type of sedation used. The second study in the first phase was conducted to identify a sedation scale that could be used to monitor level of sedation during nurse-administered PSA in the CCL. It involved a structured literature review and psychometric analysis of scale properties. However, only one scale was found that was developed specifically for the CCL, which had not undergone psychometric testing. Several weaknesses were identified in its item structure. Other sedation scales that were identified were developed for the ICU. Although these scales have demonstrated validity and reliability in the ICU, weaknesses in their item structure precluded their use in the CCL. As findings indicated that no existing sedation scale should be applied to practice in the CCL, recommendations for the development and psychometric testing of a new sedation scale were developed. The objective of the second phase of the program of research was to explore current practice. Three studies were conducted in this phase using both quantitative and qualitative research methods. The first was a qualitative explorative study of nurses’ perceptions of the issues and challenges associated with nurse-administered PSA in the CCL. Major themes emerged from analysis of the qualitative data regarding the lack of access to anaesthetists, the limitations of sedative medications, the barriers to effective patient monitoring and the impact that the increasing complexity of procedures has on patients' sedation requirements. The second study in Phase Two was a cross-sectional survey of nurse-administered PSA practice in Australian and New Zealand CCLs. This was the first study to quantify the frequency that nurse-administered PSA was used in the CCL setting and to characterise associated nursing practices. It was found that nearly all CCLs utilise nurse-administered PSA (94%). Of note, by characterising nurse-administered PSA in Australian and New Zealand CCLs, several strategies to improve practice, such as setting up protocols for patient monitoring and establishing comprehensive PSA education for CCL nurses, were identified. The third study in Phase Two was a matched case-control study of risk factors for impaired respiratory function during nurse-administered PSA in the CCL setting. Patients with acute illness were found to be nearly twice as likely to experience impaired respiratory function during nurse-administered PSA (OR=1.78; 95%CI=1.19-2.67; p=0.005). These significant findings can now be used to inform prospective studies investigating the effectiveness of interventions for impaired respiratory function during nurse-administered PSA in the CCL. The objective of the third and final phase of the program of research was to develop recommendations for practice. To achieve this objective, a synthesis of findings from the previous phases of the program of research informed a modified Delphi study, which was conducted to develop a set of clinical practice guidelines for nurse-administered PSA in the CCL. The clinical practice guidelines that were developed set current best practice standards for pre-procedural patient assessment and risk screening practices as well as the intra and post-procedural patient monitoring practices that nurses who administer PSA in the CCL should undertake in order to deliver safe, evidence-based and consistent care to the many patients who undergo procedures in this setting. In summary, the mixed methods approach that was used clearly enabled the research objectives to be comprehensively addressed in an informed sequential manner, and, as a consequence, this thesis has generated a substantial amount of new knowledge to inform and support nurse-led sedation practice in the CCL context. However, a limitation of the research to note is that the comprehensive appraisal of the evidence conducted, combined with the guideline development process, highlighted that there were numerous deficiencies in the evidence base. As such, rather than being based on high-level evidence, many of the recommendations for practice were produced by consensus. For this reason, further research is required in order to ascertain which specific practices result in the most optimal patient and health service outcomes. Therefore, along with necessary guideline implementation and evaluation projects, post-doctoral research is planned to follow up on the research gaps identified, which are planned to form part of a continuing program of research in this field.

Novel channel tracking and equalization methods in MU-MIMO-OFDM systems

The methodology undertaken, the channel model and the system model created for developing a novel adaptive equalization method and a novel channel tracking method for uplink of MU-MIMO-OFDM systems is presented in this paper. The results show that the channel tracking method works with 97% accuracy, while the training-based initial channel estimation method shows poor performance in estimating the actual channel comparatively.

Mapping semantic knowledge for unsupervised text categorisation

Text categorisation is challenging, due to the complex structure with heterogeneous, changing topics in documents. The performance of text categorisation relies on the quality of samples, effectiveness of document features, and the topic coverage of categories, depending on the employing strategies; supervised or unsupervised; single labelled or multi-labelled. Attempting to deal with these reliability issues in text categorisation, we propose an unsupervised multi-labelled text categorisation approach that maps the local knowledge in documents to global knowledge in a world ontology to optimise categorisation result. The conceptual framework of the approach consists of three modules; pattern mining for feature extraction; feature-subject mapping for categorisation; concept generalisation for optimised categorisation. The approach has been promisingly evaluated by compared with typical text categorisation methods, based on the ground truth encoded by human experts.

Maintaining shared knowledge of acquaintance : methods people use to establish who knows whom

Acquaintance is a fundamental determinant of how people behave when interacting with one another. This article focuses on how this type of personal knowledge is an important consideration for people as social actors. Studying naturally-occurring social encounters, I describe how speakers use particular references to convey whether a recipient should be able to recognise a non-present third party. On some occasions, however, the presumption of recognisability or non-recognisability that underpins the use of a particular reference proves questionable. By exploring how recipients can challenge reference forms, and thereby reject claims of either recognisability or non-recognisability, I explain how people establish and maintain a shared understanding of who knows whom. I conclude by discussing motivations for this behaviour, and thereby contribute to understanding the commonsense reasoning that underpins orderly conduct in this aspect of social encounters.

Feeding attitudes, practices and traditional dietary beliefs of Chinese mothers with young children in Australia : a mixed methods study

Background and Objectives Obesity and some dietary related diseases are emerging health problems among Chinese immigrants and their children in developed countries. These health problems are closely linked to eating habits, which are established in the early years of life. Young children’s eating habits are likely to persist into later childhood and youth. Family environment and parental feeding practices have a strong effect on young children’s eating habits. Little information is available on the early feeding practices of Chinese mothers in Australia. The aim of this study was to understand the dietary beliefs, feeding attitudes and practices of Chinese mothers with young children who were recent immigrants to Australia. Methods Using a sequential explanatory design, this mixed methods study consisted of two distinct phases. Phase 1 (quantitative): 254 Chinese immigrant mothers of children aged 12 to 59 months completed a cross-sectional survey. The psychometric properties and factor structure of a Chinese version of the Child Feeding Questionnaire (CFQ, by Birch et al. 2001) were assessed and used to measure specific maternal feeding attitudes and controlling feeding practices. Other questions were developed from the literature and used to explore maternal traditional dietary beliefs and feeding practices related to their beliefs, perceptions of picky eating in children and a range of socioeconomic and acculturation factors. Phase 2 (qualitative): 21 mothers took part in a follow-up telephone interview to assist in explaining and interpreting some significant findings obtained in the first phase. Results Chinese mothers held strong traditional dietary beliefs and fed their children according to these beliefs. However, children’s consumption of non-core foods was high. Both traditional Chinese and Australian style foods were consumed by their children. Confirmatory factor analysis revealed that the original 7-factor model of the CFQ provided an acceptable fit to the data with minor modification. However, an alternative model with eight constructs in which two items related to using food rewards were separated from the original restriction construct, not only provided an acceptable fit to the data, but also improved the conceptual clarity of the constructs. The latter model included 24 items loading onto the following eight constructs: restriction, pressure to eat, monitoring, use of food rewards, perceived responsibility, perception of own weight, perception of child’s weight, and concern about child becoming overweight. The internal consistency of the constructs was acceptable or desirable (Cronbach’s α = .60 - .93). Mothers reported low levels of concern about their child overeating or becoming overweight, but high levels of controlling feeding practices: restriction, monitoring, pressure to eat and use of food rewards. More than one quarter of mothers misinterpreted their child’s weight status (based on mothers’ self-reported data). In addition, mothers’ controlling feeding practices independently predicted half of the variance and explained 16% of the variance in child weight status: pressuring the child to eat was negatively associated with child weight status (β = -0.30, p < .01) and using food rewards was positively associated with child weight status (β = 0.20, p < .05) after adjusting for maternal and child covariates. Monitoring and restriction were not associated with child weight status. Mothers’ perceptions of their child’s weight were positively associated with child weight status (β = 0.33, p < .01). Moreover, mothers reported that they mostly decided what (65%) and how much (80%) food their child ate. Mothers who decided what food their child ate were more likely to monitor (β = -0.17, p < .05) and restrict (β = -0.17, p < .05) their child’s food consumption. Mothers who let their child decide how much food their child ate were less likely to pressure their child to eat (β = -0.38, p < .01) and use food rewards (β = -0.24, p < .01). Mothers’ perceptions of picky eating behaviour were positively associated with their use of pressure (β = 0.21, p < .01) and negatively associated with monitoring (β = -0.16, p < .05) and perceptions of their child’s weight status (β = -0.13, p < .05). Qualitative data showed that pressuring to eat, monitoring and restriction of the child’s food consumption were common practices among these mothers. However, mothers stated that their motivation for monitoring and restricting was to ensure the child’s general health. Mothers’ understandings of picky eating behaviour in their children were consistent with the literature and they reported multiple feeding strategies to deal with it. Conclusion Chinese immigrant mothers demonstrated strong traditional dietary beliefs, a low level of concern for child weight, misperceptions of child weight status, and a high overall level of control in child feeding in this study. The Chinese version of the CFQ, which consists of eight constructs and distinguishes between the constructs using food rewards and restriction, is an appropriate instrument to assess feeding attitudes and controlling feeding practices among Chinese immigrant mothers of young children in Australia. Mothers’ feeding attitudes and practices were associated with children’s weight status and mothers’ perceptions of picky eating behaviour in children after adjusting for a range of socio-demographic maternal and child characteristics. Monitoring and restriction of children’s food consumption according to food selection may be positive feeding practices, whereas pressuring to eat and using food rewards appeared to be negative feeding practices in this study. In addition, the results suggest that these young children have high exposure to energy-dense, nutrient-poor food. There is a need to develop and implement nutrition interventions to improve maternal feeding practices and the dietary quality among children of Chinese immigrant mothers in Australia.

Pharmacokinetics of isofraxidin in rat plasma after oral administration of the extract of acanthopanax senticosus using HPLC with solid phase extraction method

High-performance liquid chromatography coupled with solid phase extraction method was developed for determination of isofraxidin in rat plasma after oral administration of Acanthopanax senticosus extract (ASE), and pharmacokinetic parameters of isofraxidin either in ASE or pure compound were measured. The HPLC analysis was performed on a Dikma Diamonsil RP(18) column (4.6 mm x 150 mm, 5 microm) with the isocratic elution of solvent A (acetonitrile) and solvent B (0.1% aqueous phosphoric acid, v/v) (A : B = 22 : 78) and the detection wavelength was set at 343 nm. The calibration curve was linear over the range of 0.156-15.625 microg/ml. The limit of detection was 60 ng/ml. The intra-day precision was 5.8%, and the inter-day precision was 6.0%. The recovery was 87.30+/-1.73%. When the dosage of ASE is equal to pure compound caculated by the amount of isofraxidin, it has been found to have two maximum concentrations in plasma while the pure compound only showed one peak in the plasma concentration-time curve. The determined content of isofraxidin in plasma after oral administration of ASE is the total contents of free isofraxidin and its precursors in ASE in vitro. The pharmacokinetic characteristics of ASE showed the priority of the extract and the properities of traditional Chinese medicine.