414 resultados para Type of misspellings
Resumo:
Tunable charge-trapping behaviors including unipolar charge trapping of one type of charge carrier and ambipolar trapping of both electrons and holes in a complementary manner is highly desirable for low power consumption multibit flash memory design. Here, we adopt a strategy of tuning the Fermi level of reduced graphene oxide (rGO) through self-assembled monolayer (SAM) functionalization and form p-type and n-type doped rGO with a wide range of manipulation on work function. The functionalized rGO can act as charge-trapping layer in ambipolar flash memories, and a dramatic transition of charging behavior from unipolar trapping of electrons to ambipolar trapping and eventually to unipolar trapping of holes was achieved. Adjustable hole/electron injection barriers induce controllable Vth shift in the memory transistor after programming operation. Finally, we transfer the ambipolar memory on flexible substrates and study their charge-trapping properties at various bending cycles. The SAM-functionalized rGO can be a promising candidate for next-generation nonvolatile memories.
Resumo:
The aim of this research is to determine if a range of crimes in a suburb have an impact on the residential property sectors in that particular suburb. With the increasing media coverage of crime in specific locations, this knowledge of crime in Brisbane Australia is more available to potential residential property buyers This research is based on the analysis of the crime statistics for 30 suburbs in Brisbane across a range of major crime activities and compares the level of crime to property median prices, sales volume and in a range of suburbs the volume of sale and lease listings. The results of the research show a significant variation in the response of buyers in residential property markets based on the type of crime and the socio-economic status of the suburb. In a range of suburbs, value factors other than crime are the major drivers of the market. The study provides an insight into consumer behaviour in a major city and the response of residential property buyers to an increasing level and awareness of crime statistics in the suburbs they are considering to buy. Implications of this research are that with a greater level of awareness of factors that could be a disadvantage to some potential buyers are not always reflected across a full residential property market. Valuers, property financiers and the public need to be aware of the type of crime and locations that have a direct impact on property prices and saleability These results expand on the current knowledge of value drivers in major residential property markets.
Resumo:
A staged crime scene involves deliberate alteration of evidence by the offender to simulate events that did not occur for the purpose of misleading authorities (Geberth, 2006; Turvey, 2000). This study examined 115 staged homicides from the USA to determine common elements; victim and perpetrator characteristics; and specific features of different types of staged scenes. General characteristics include: multiple victims and offenders; a previous relationship be- tween parties involved; and victims discovered in their own home, often by the offender. Staged scenes were separated by type with staged burglaries, suicides, accidents, and car accidents examined in more detail. Each type of scene displays differently with separate indicators and common features. Features of staged burglaries were: no points of entry/exit staged; non-valuables taken; scene ransacking; offender self- injury; and offenders bringing weapons to the scene. Features of staged suicides included: weapon arrangement and simulating self-injury to the victim; rearranging the body; and removing valuables. Examples of elements of staged accidents were arranging the implement/weapon and re- positioning the deceased; while staged car accidents involved: transporting the body to the vehicle and arranging both; mutilation after death; attempts to secure an alibi; and clean up at the primary crime scene. The results suggest few staging behaviors are used, despite the credibility they may have offered the façade. This is the first peer-reviewed, published study to examine the specific features of these scenes, and is the largest sample studied to date.
Resumo:
We hypothesize that a major macroeconomic crisis triggers four alternative responses among nascent entrepreneurs: disengagement, delay, compensation, and adaptation. We also suggest that commitment and ambition (or “high potential”) moderate these responses. Our most important finding is the relative absence of behavioral crisis responses. However, crises may make high-tech founders become more likely to disengage, whereas the opposite holds for founders far into the process. Our study sheds light on the mechanisms behind aggregate effects of crises on the number and type of start-ups in an economy, and can guide future research on the effect of crises on nascent entrepreneurship.
Resumo:
An increasing amount of people seek health advice on the web using search engines; this poses challenging problems for current search technologies. In this paper we report an initial study of the effectiveness of current search engines in retrieving relevant information for diagnostic medical circumlocutory queries, i.e., queries that are issued by people seeking information about their health condition using a description of the symptoms they observes (e.g. hives all over body) rather than the medical term (e.g. urticaria). This type of queries frequently happens when people are unfamiliar with a domain or language and they are common among health information seekers attempting to self-diagnose or self-treat themselves. Our analysis reveals that current search engines are not equipped to effectively satisfy such information needs; this can have potential harmful outcomes on people’s health. Our results advocate for more research in developing information retrieval methods to support such complex information needs.
Resumo:
For more than 15 years, QUT’s Visual Arts discipline has employed a teaching model known as the ‘open studio’ in their undergraduate BFA program. Distinct from the other models of studio degrees in Australia, the open studio approach emphasizes individual practice by focusing on experimentation, collaboration and cross-disciplinary activities. However, while this activity proves to be highly relevant to exploring and participating in the ‘post medium’ nature of much contemporary art, the open studio also presents a complex of affecting challenges to the artist-teacher. The open studio, it can be argued, produces a different type of student than traditional, discipline-specific art programs – but it also produces a different kind of artist-teacher. In this paper, the authors will provide a reflection on their own experiences as artists and studio lecturers involved with the two ‘bookends’ of the QUT studio program – first year and third year. Using these separate contexts as case studies, the authors will discuss the transformative qualities of the open studio as it is adapted to the particularities of each cohort and the curricular needs of each year level. In particular, the authors will explore the way the teaching experience has influenced and positively challenged their individual (and paradoxically) discipline-focussed, studio practices. It is generally accepted that the teaching of art needs to be continually reconceptualised in response to the changing conditions of contemporary art, culture and technology. This paper will articulate how the authors have worked at that reconceptualisation within both their teaching and studio practices and so practically demonstrate the complex dialogic processes inherent to the teaching of the visual arts studio.
Resumo:
As the society matures, there was an increasing pressure to preserve historic buildings. The economic cost in maintaining these important heritage legacies has become the prime consideration of every state. Dedicated intelligent monitoring systems supplementing the traditional building inspections will enable the stakeholder to carry out not only timely reactive response but also plan the maintenance in a more vigilant approach; thus, preventing further degradation which was very costly and difficult to address if neglected. The application of the intelligent structural health monitoring system in this case studies of ‘modern heritage’ buildings is on its infancy but it is an innovative approach in building maintenance. ‘Modern heritage’ buildings were the product of technological change and were made of synthetic materials such as reinforced concrete and steel. Architectural buildings that was very common in Oceania and The Pacific. Engineering problems that arose from this type of building calls for immediate engineering solution since the deterioration rate is exponential. The application of this newly emerging monitoring system will improve the traditional maintenance system on heritage conservation. Savings in time and resources can be achieved if only pathological results were on hand. This case study will validate that approach. This publication will serve as a position paper to the on-going research regarding application of (Structural Health Monitoring) SHM systems to heritage buildings in Brisbane, Australia. It will be investigated with the application of the SHM systems and devices to validate the integrity of the recent structural restoration of the newly re-strengthened heritage building, the Brisbane City Hall.
Resumo:
Masonry bond is affected by many parameters such as the type of mortar used, the techniques of dispersion of mortar and the surface texture of the concrete blocks. Additionally it is understood from the studies on conventional masonry that the bond characteristics are also influenced by the curing methods as well as the age of the bond at the time of testing. These effects on thin layer mortared masonry employing polymer cement mortars are not well understood. Therefore, the effect of curing methods and age to the bond strength and deformation of masonry containing thin layered polymer cement mortar was investigated as part of an ongoing research program at the Queensland University of Technology. This paper presents an experimental investigation of the flexural and shear bond characteristics of the thin layer mortared concrete masonry. The parameters examined include the effects curing and ageing to the bond development over a period from 14 days to 56 days after fabrication. The results exhibit that dry cured thin layer mortared masonry exhibits higher bond strength and Young’s and shear moduli compared to the wet cured specimens.
Resumo:
A new database called the World Resource Table is constructed in this study. Missing values are known to produce complications when constructing global databases. This study provides a solution for applying multiple imputation techniques and estimates the global environmental Kuznets curve (EKC) for CO2, SO2, PM10, and BOD. Policy implications for each type of emission are derived based on the results of the EKC using WRI. Finally, we predicted the future emissions trend and regional share of CO2 emissions. We found that East Asia and South Asia will be increasing their emissions share while other major CO2 emitters will still produce large shares of the total global emissions.
Resumo:
Inflammation is a fundamental component of the normal adult wound healing response occurring even in the absence of infection. It performs many beneficial roles such as the clearing of damaged cells and extracellular matrix (ECM), the removal of pathogens that might other wise multiply and spread, and the secretion of mediators that regulate other aspects of wound healing such as proliferation, re-epithelialisation and wound remodelling. Yet, excess and/or prolonged inflammation is detrimental to wound healing and leads to increased fibrosis and scarring, which can be disfiguring and, in cases such as contractures, can lead to disability. Furthermore, excessive inflammation is a major contributing factor to the persistence of chronic non-healing wounds, which are “stuck” in the inflammatory phase of healing and fail to reepithelialise. Current research suggest that the type of immune cells, their timing and the level of inflammation in a wound could have dramatic effect on whether a wound heals in a timely fashion and the final quality of the repaired tissue. Studies suggest that altering the level of inflammation might be beneficial in terms of reducing scarring and improving the rate of healing in chronic wounds. This review looks at the role of the major immune cells in normal and impaired wound healing and strategies that might be used to reduce inflammation in wounds.
Resumo:
A two-dimensional variable-order fractional nonlinear reaction-diffusion model is considered. A second-order spatial accurate semi-implicit alternating direction method for a two-dimensional variable-order fractional nonlinear reaction-diffusion model is proposed. Stability and convergence of the semi-implicit alternating direct method are established. Finally, some numerical examples are given to support our theoretical analysis. These numerical techniques can be used to simulate a two-dimensional variable order fractional FitzHugh-Nagumo model in a rectangular domain. This type of model can be used to describe how electrical currents flow through the heart, controlling its contractions, and are used to ascertain the effects of certain drugs designed to treat arrhythmia.
Resumo:
Background: The Pharmacy Board of Australia stipulated that for renewal of registration, pharmacists must have accrued a minimum of 20 CPD credits over the 2010-11 registration years (1). Mandatory CPD is not new in Pharmacy. The UK and New Zealand have both established systems of CPD in recent years. The purpose of this study is to investigate established CPD processes in the UK and New Zealand with the view to making recommendations for the implementation of the CPD process in Australia. Objectives: To compare the acquisition and guidance on documentation of CPD credit points in Australia, New Zealand and the United Kingdom. Methodology: A comparative online search of the websites of each of the registering authorities was undertaken. Any practice standards or guidelines which relate to registration or continuing professional development were analysed and compared. Results: In New Zealand the Pharmacy Council require Pharmacists to have a minimum of 12 outcome credits over a 3-year period for recertification (2, 3). The outcome credit related to each CPD action and is based on relevance to the pharmacist and their practice. It is graded between one, for CPD which has occasional relevance to practice and three which have considerable relevance to practice. There are examples of completed CPD recording sheets on their website (8). In the UK, The General Pharmaceutical Council require Pharmacists to make a minimum of nine CPD entries per year (4) and detailed guidance on how to record CPD activities is provided (5,7). The Pharmacy Board of Australia divides CPD activities into three groups (6). Of the 20 credits required annually only 10 can be gained from group one activities, which is information accessed without assessment. There is only brief guidance on the recording of CPD. Discussion: The GPhC in the UK provided the most comprehensive guidance on acquisition of CPD credit points and documentation (5,7) The Pharmacy Council of New Zealand made CPD points relevant to practice.(2,8) The Pharmacy Board of Australia provided limited information for pharmacists on CPD activities, which may impede pharmacist participation. Information may assist in increasing pharmacists’ engagement in CPD activities. In conclusion, there is variation between the three countries in the amount and type of information provided about CPD requirements.
Resumo:
Review questions/objective What is the effectiveness of meaningful occupation interventions for people living with dementia in residential aged care facilities? More specifically, the objectives are to identify: The effectiveness of interventions based on engaging residents of residential aged care facilities who have dementia in meaningful occupation (activities that have meaning for the individual) on: quality of life, behavioral and psychological symptoms of dementia (such as agitation, aggression, depression, wandering, apathy, etc.), mood, function, cognition, and sleep. Inclusion criteria Types of participants This review will consider studies that include participants with a confirmed diagnosis of any type of dementia living in residential aged care facilities / long term care/nursing homes/permanent care. Types of intervention(s)/phenomena of interest This review will consider studies that evaluate non-pharmacological interventions that are based on occupational or activity interventions considered to be meaningful to the person with dementia, and tailoring the intervention to meet their needs, abilities, interests and/or preferences will be required as part of the study’s methodology. Such interventions may include reminiscence therapy, exercise therapy, music therapy, individualized activity, behavioral interventions, recreational therapy, diversional therapy and psychosocial interventions. Trials of combinations of two or more such interventions will also be considered. Interventions may be in comparison to usual care, other meaningful occupation interventions, or any other non-pharmacological control or comparator.
Resumo:
Over the past decades, universities have increasingly become ambidextrous organizations reconciling scientific and commercial missions. In order to manage this ambidexterity, technology transfer offices (TTOs) were established in most universities. This paper studies a specific, often implemented, but rather understudied type of TTO, namely a hybrid TTO model uniting centralized and decentralized levels. Employing a qualitative research design, we examine how and why the two TTO levels engage in diverse boundary spanning activities to help nascent spin-off companies move through the pre-spin-off process. Our research identifies differences in the types of boundary spanning activities that centralized and decentralized TTOs perform and in the parties they engage with. We find geographical, technological and organizational proximity to be important antecedents of the TTOs’ engagement in external and internal boundary spanning activities. These results have important implications for both academics and practitioners interested in university technology transfer through spin-off creation.
Resumo:
Individuals with limb amputation fitted with conventional socket-suspended prostheses often experience socket related discomfort leading to a significant decrease in quality of life.[1-14] Most of these concerns can be overcome with osseointegration, a direct skeletal fixation method where the prosthetic componentry are directly attached to the fixation, resulting in the redundancy of the traditional socket system. There are two stages of osseointegration; Stage one, a titanium implant is inserted into the marrow space of residual limb bone and Stage two, a titanium extension is attached to the fixture. This surgical procedure is currently blooming worldwide, particularly within Queensland. Whilst providing improvements in quality of life, this new method also has potential to minimise the cost required for an amputee to ambulate during daily living. Thus, the aim of this project was to compare the differences in mean cost of services, cost of componentry and labour hours when using osseointegration compared to traditional socket-based prostheses. Data were extracted from Queensland Artificial Limb Services (QALS) database to determine cost of services, type of services and labour hours required to maintain a prosthetic limb. Five trans-femoral amputee male participants (age 46.4±10.1 yrs; height 175.4±16.3 cm; mass 83.8±14.0 kg; time since second stage 22.0± 8.1 mths) met inclusion criteria which was patient had to be more than 12 months post stage two osseointegration procedure. The socket and osseointegration prosthesis variables examined were the mean hours of labour, mean cost of services and mean cost of prosthetic componentry. Statistical analyses were conducted using an ANOVA. The results identified that there were only significant differences in the number of labour hours (p = 0.005) and cost of services (p = 0.021) when comparing the socket and osseointegration prosthetic type. These results identified that the cost of componentry were comparable between the two methods.