A Gaussian pseudolikelihood approach for quantile regression with repeated measurements

To enhance the efficiency of regression parameter estimation by modeling the correlation structure of correlated binary error terms in quantile regression with repeated measurements, we propose a Gaussian pseudolikelihood approach for estimating correlation parameters and selecting the most appropriate working correlation matrix simultaneously. The induced smoothing method is applied to estimate the covariance of the regression parameter estimates, which can bypass density estimation of the errors. Extensive numerical studies indicate that the proposed method performs well in selecting an accurate correlation structure and improving regression parameter estimation efficiency. The proposed method is further illustrated by analyzing a dental dataset.

Causal factors of hot air ballooning incidents : identification, frequency, and potential impact

Background: Hot air ballooning incidents are relatively rare, however, when they do occur they are likely to result in a fatality or serious injury. Human error is commonly attributed as the cause of hot air ballooning incidents; however, error in itself is not an explanation for safety failures. This research aims to identify, and establish the relative importance of factors contributing towards hot air ballooning incidents. Methods: Twenty-two Australian Ballooning Federation (ABF) incident reports were thematically coded using a bottom up approach to identify causal factors. Subsequently, 69 balloonists (mean 19.51 years’ experience) participated in a survey to identify additional causal factors and rate (out of seven) the perceived frequency and potential impact to ballooning operations of each of the previously identified causal factors. Perceived associated risk was calculated by multiplying mean perceived frequency and impact ratings. Results: Incident report coding identified 54 causal factors within nine higher level areas: Attributes, Crew resource management, Equipment, Errors, Instructors, Organisational, Physical Environment, Regulatory body and Violations. Overall, ‘weather’, ‘inexperience’ and ‘poor/inappropriate decisions’ were rated as having greatest perceived associated risk. Discussion: Although errors were nominated as a prominent cause of hot air ballooning incidents, physical environment and personal attributes are also particularly important for safe hot air ballooning operations. In identifying a range of causal factors the areas of weakness surrounding ballooning operations have been defined; it is hoped that targeted safety and training strategies can now be put into place removing these contributing factors and reducing the chance of pilot error.

Model as you do : engaging an S-BPM vendor on process modelling in 3D virtual worlds

Accurate process model elicitation continues to be a time consuming task, requiring skill on the part of the interviewer to extract explicit and tacit process information from the interviewee. Many errors occur in this elicitation stage that would be avoided by better activity recall, more consistent specification methods and greater engagement in the elicitation process by interviewees. Metasonic GmbH has developed a process elicitation tool for their process suite. As part of a research engagement with Metasonic, staff from QUT, Australia have developed a 3D virtual world approach to the same problem, viz. eliciting process models from stakeholders in an intuitive manner. This book chapter tells the story of how QUT staff developed a 3D Virtual World tool for process elicitation, took the outcomes of their research project to Metasonic for evaluation, and finally, Metasonic’s response to the initial proof of concept.

A BIM-based collaborative design platform for variegated specialty design

With the increase in complexity of engineering projects and design quality in the construction industry, the traditional two-dimensional "Information Island" approach to design is becoming less able to meet current design needs due to its lack of coordination and information sharing. Collaborative design using a Build Information Modeling (BIM) technology platform promises to provide an effective means of designing and communicating through networking and real-time data sharing. This paper first analyzes the shortcomings of the two-dimensional design process and the potential application of collaborative design. By combining the attributes of BIM, a preliminary BIM-based building design collaborative platform is developed to improve the design approach and support a more collaborative design process. A real-life case is presented to demonstrate the feasibility and validity of the platform and its use in practice. From this, it is shown that BIM has the potential to realize effective information sharing and reduce errors, thereby improving design quality. The BIM-based building design collaborative platform presented is expected to provide the support needed for the extensive application of BIM in collaborative design and promote a new attitude to project management.

Teaching and assessment of prescribing medicines : how does pharmacy perform?

BACKGROUND Prescribing is a complex task, requiring specific knowledge and skills combined with effective, context-specific clinical reasoning. Prescribing errors can result in significant morbidity and mortality. For all professions with prescribing rights, a clear need exists to ensure students graduate with a well-defined set of prescribing skills, which will contribute to competent prescribing. AIM To describe the methods employed to teach and assess the principles of effective prescribing across five non-medical professions at Queensland University of Technology. METHOD The NPS National Prescribing Competencies Framework (PCF) was used as the prescribing standard. A curriculum mapping exercise was undertaken to determine how well the PCF was addressed across the disciplines of paramedic science, pharmacy, podiatry, nurse practitioner and optometry. Identified gaps in teaching and/or assessment were noted. RESULTS Prescribing skills and knowledge are taught and assessed using a range of methods across disciplines. A multi-modal approach is employed by all disciplines. The Pharmacy discipline uses more tutorial sessions to teach prescribing principles and relies less on case studies and clinical appraisal to assess prescribing when compared to other disciplines. Within the pharmacy discipline approximately 90% of the PCF competencies are taught and assessed. This compares favourably with the other disciplines. CONCLUSION Further work is required to establish a practical, effective approach to the assessment of prescribing competence especially between the university and clinical settings. Effective and reliable assessment of prescribing undertaken by students in diverse settings remains challenging.

Navigating uncertainty in Australia : fostering informed citizenship through teaching controversial issues with pre-service teachers

Australia is a multicultural immigrant society created by public policy and direct state action over a period of two hundred years. It is now one of the world’s most diverse societies. However, like many nations, Australia faces challenges to managing ‘unauthorized arrivals’ who claim to be refugees. The issue of how to deal with unauthorized arrivals is controversial and highly emotive as it challenges public policy and government capacity to manage the multicultural ‘mix’ of Australia’s population. It also raises questions about border security. Given that it is impossible to discern beforehand who is a ‘proper’ refugee and who is not, claims to refugee status by unauthorised arrivals in Australia need to be tested against international convention criteria devised by the United Nations High Commissioner for Refugees (UNHCR). There are no simple solutions to controversial questions such as how and where should unauthorised arrivals, and the children accompanying them, be housed whilst their claims are investigated? Moreover, as this issue continues to prompt division and heated debate in Australian society, teachers new to the profession are often reluctant to explore it in the classroom. However, there are opportunities in national and state curriculum documents for the values dimensions of curriculum inquiries into controversial issues such as this to be addressed. For example, the most recent national statement on the goals for schooling in Australia, the Melbourne Declaration (MCEETYA, 2008), makes clear that Australian students need to be prepared for the challenges of the 21st century and to develop the capacity for innovation and complex problem-solving. The Melbourne Declaration informs the first national curriculum to be implemented in the Australian states and territories, and all other national and state initiatives. Its focus on developing active and informed citizens who can contribute to a socially cohesive society implies a capacity to deal with a range of issues associated with cultural diversity, This chapter explores the ways in which pre-service and early career teachers in one Australian state reflect upon curriculum opportunities to address controversial issues in the social sciences and history classroom. As part of their pre-service education, all the participants in this study completed a final year social science curriculum method unit that embedded a range of controversial issues, including the placement of children in Australian Immigration Detention Centres (IDCs), for investigation. By drawing from interviews and focus groups conducted with different cohorts of pre-service teachers in their final year of university study and beginning years of teaching, this chapter analyses the range of perceptions about how controversial issues can be examined in the secondary classroom as part of fostering informed citizenship. The discussion and analysis of the qualitative data in this study makes no claims for the representativeness of its findings, rather, a range of beginner teacher insights into a complex and important facet of teaching in a period of change and uncertainty is offered.

Using upper bounds on attainable discrimination to select discrete valued features

Selection of features that will permit accurate pattern classification is a difficult task. However, if a particular data set is represented by discrete valued features, it becomes possible to determine empirically the contribution that each feature makes to the discrimination between classes. This paper extends the discrimination bound method so that both the maximum and average discrimination expected on unseen test data can be estimated. These estimation techniques are the basis of a backwards elimination algorithm that can be use to rank features in order of their discriminative power. Two problems are used to demonstrate this feature selection process: classification of the Mushroom Database, and a real-world, pregnancy related medical risk prediction task - assessment of risk of perinatal death.

Hydrological consequences of land-cover change: Quantifying the influence of plants on soil moisture with time-lapse electrical resistivity

Electrical resistivity of soils and sediments is strongly influenced by the presence of interstitial water. Taking advantage of this dependency, electrical-resistivity imaging (ERI) can be effectively utilized to estimate subsurface soil-moisture distributions. The ability to obtain spatially extensive data combined with time-lapse measurements provides further opportunities to understand links between land use and climate processes. In natural settings, spatial and temporal changes in temperature and porewater salinity influence the relationship between soil moisture and electrical resistivity. Apart from environmental factors, technical, theoretical, and methodological ambiguities may also interfere with accurate estimation of soil moisture from ERI data. We have examined several of these complicating factors using data from a two-year study at a forest-grassland ecotone, a boundary between neighboring but different plant communities.At this site, temperature variability accounts for approximately 20-45 of resistivity changes from cold winter to warm summer months. Temporal changes in groundwater conductivity (mean=650 S/cm =57.7) and a roughly 100-S/cm spatial difference between the forest and grassland had only a minor influence on the moisture estimates. Significant seasonal fluctuations in temperature and precipitation had negligible influence on the basic measurement errors in data sets. Extracting accurate temporal changes from ERI can be hindered by nonuniqueness of the inversion process and uncertainties related to time-lapse inversion schemes. The accuracy of soil moisture obtained from ERI depends on all of these factors, in addition to empirical parameters that define the petrophysical soil-moisture/resistivity relationship. Many of the complicating factors and modifying variables to accurately quantify soil moisture changes with ERI can be accounted for using field and theoretical principles.

Veracity of the archive : a research approach to the collection and verification of urban morphological records using qualitative data analysis software

Critical to the research of urban morphologists is the availability of historical records that document the urban transformation of the study area. However, thus far little work has been done towards an empirical approach to the validation of archival data in this field. Outlined in this paper, therefore, is a new methodology for validating the accuracy of archival records and mapping data, accrued through the process of urban morphological research, so as to establish a reliable platform from which analysis can proceed. The paper particularly addresses the problems of inaccuracies in existing curated historical information, as well as errors in archival research by student assistants, which together give rise to unacceptable levels of uncertainty in the documentation. The paper discusses the problems relating to the reliability of historical information, demonstrates the importance of data verification in urban morphological research, and proposes a rigorous method for objective testing of collected archival data through the use of qualitative data analysis software.

Scoping workplace aggression in nursing : findings from an Australian study

Aim This paper reports a study of workplace aggression among nurses in Tasmania, Australia. Background There is international concern about a perceived rise in occupational violence as a major worldwide public health problem, with associated financial costs. There is reason to suspect that aggression towards nurses is increasing. For example, increased illicit drug use puts nurses at the sharp end in managing patients admitted with drug-related problems. Such people are often resistant to healthcare intervention, and often have associated disorders, including mental illness. Despite this increased awareness, comprehensive data on occupational violence in nursing are not available. Method A specially designed questionnaire was sent to all nurses registered with the Nursing Board of Tasmania (n ¼ 6326) in November/December 2002, with 2407 usable questionnaires returned. The response rate was 38%. Findings A majority of respondents (63Æ5%) had experienced some form of aggression (verbal or physical abuse) in the four working weeks immediately prior to the survey. Patients/clients or their visitors were identified as the main perpetrators, followed by medical and nursing colleagues. Abuse influenced nurses’ distress, their desire to stay in nursing, their productivity and the potential to make errors, yet they were reluctant to make their complaints ‘official’. As well as reporting high levels of verbal and physical abuse, nurses were distressed because they could not provide the appropriate care to meet patients’ needs. Few working environments were free of aggression. Conclusion Future research should try to determine the specific factors, including staff characteristics and environment, associated with the high levels of aggression reported in ‘hot spots’ where, on the basis of the present results, many staff experience high levels of verbal and physical abuse. Unless managers take steps to improve the situation, attrition from the profession for this reason will continue.

Measuring in-vehicle child comfort to study barriers to appropriate and correct use of restraints

Traffic crashes are the leading cause of death and injury among children aged between 4-14 years1,2 and premature graduation to adult seat belts2,3 and restraint misuse4 are common and known risk factors. Children are believed to prematurely graduate to adult belts and misuse the seat belt in booster seats if uncomfortable2,5,6. Although research has concentrated on educating parents and designing better restraints to reduce errors in use, comfort of the child in the restraint has not been studied. Currently there is no existing method for studying comfort in children in restraint systems, although self-report survey tools and pressure distribution mapping is commonly used to measure comfort among adult in vehicle seats. This poster presents preliminary results from work aimed at developing an appropriate method to measure comfort of children in vehicle restraint systems. The specific aims are to: 1. Examine the potential of using modified adult self-report/survey and pressure distribution mapping in children 2. Develop a video based, objective measure of comfort in children.

Assessing driver acceptance of intelligent transport systems in the context of railway level crossings

Intelligent Transport Systems (ITS) have the potential to substantially reduce the number of crashes caused by human errors at railway levels crossings. Such systems, however, will only exert an influence on driving behaviour if they are accepted by the driver. This study aimed at assessing driver acceptance of different ITS interventions designed to enhance driver behaviour at railway crossings. Fifty eight participants, divided into three groups, took part in a driving simulator study in which three ITS devices were tested: an in-vehicle visual ITS, an in-vehicle audio ITS, and an on-road valet system. Driver acceptance of each ITS intervention was assessed in a questionnaire guided by the Technology Acceptance Model and the Theory of Planned Behaviour. Overall, results indicated that the strongest intentions to use the ITS devices belonged to participants exposed to the road-based valet system at passive crossings. The utility of both models in explaining drivers’ intention to use the systems is discussed, with results showing greater support for the Theory of Planned Behaviour. Directions for future studies, along with strategies that target attitudes and subjective norms to increase drivers’ behavioural intentions, are also discussed.

Integrating field survey data with satellite image data to improve shallow water seagrass maps : the role of AUV and snorkeller surveys

Repeatable and accurate seagrass mapping is required for understanding seagrass ecology and supporting management decisions. For shallow (< 5 m) seagrass habitats, these maps can be created by integrating high spatial resolution imagery with field survey data. Field survey data for seagrass is often collected via snorkelling or diving. However, these methods are limited by environmental and safety considerations. Autonomous Underwater Vehicles (AUVs) are used increasingly to collect field data for habitat mapping, albeit mostly in deeper waters (>20 m). Here we demonstrate and evaluate the use and potential advantages of AUV field data collection for calibration and validation of seagrass habitat mapping of shallow waters (< 5 m), from multispectral satellite imagery. The study was conducted in the seagrass habitats of the Eastern Banks (142 km2), Moreton Bay, Australia. In the field, georeferenced photos of the seagrass were collected along transects via snorkelling or an AUV. Photos from both collection methods were analysed manually for seagrass species composition and then used as calibration and validation data to map seagrass using an established semi-automated object based mapping routine. A comparison of the relative advantages and disadvantages of AUV and snorkeller collected field data sets and their influence on the mapping routine was conducted. AUV data collection was more consistent, repeatable and safer in comparison to snorkeller transects. Inclusion of deeper water AUV data resulted in mapping of a larger extent of seagrass (~7 km2, 5 % of study area) in the deeper waters of the site. Although overall map accuracies did not differ considerably, inclusion of the AUV data from deeper water transects corrected errors in seagrass mapped at depths to 5 m, but where the bottom is visible on satellite imagery. Our results demonstrate that further development of AUV technology is justified for the monitoring of seagrass habitats in ongoing management programs.

Mistakes or deliberate violations? A study into the origins of rule breaking at pedestrian train crossings

Train pedestrian collisions are the most likely to result in severe injuries and fatalities when compared to other types of rail crossing accidents. However, there is currently scant research that has examined the origins of pedestrians’ rule breaking at level crossings. As a result, this study examined the origins of pedestrians’ rule breaking behaviour at crossings, with particular emphasis directed towards examining the factors associated with making errors versus deliberation violations. A total of 636 individuals volunteered to participate in the study and completed either an online or paper version of the questionnaire. Quantitative analysis of the data revealed that knowledge regarding crossing rules was high, although up to 18% of level crossing users were either unsure or did not know (in some circumstances) when it was legal to cross at a level crossing. Furthermore, 156 participants (24.52%) reported having intentionally violated the rules at level crossings and 3.46% (n = 22) of the sample had previously made a mistake at a crossing. In regards to rule violators, males (particularly minors) were more likely to report breaking rules, and the most frequent occurrence was after the train had passed rather than before it arrives. Regression analysis revealed that males who frequently use pedestrian crossings and report higher sensation seeking traits are most likely to break the rules. This research provides evidence that pedestrians are more likely to deliberately violate rules (rather than make errors) at crossings and it illuminates high risk groups. This paper will further outline the study findings in regards to the development of countermeasures as well as provide direction for future research efforts in this area.

Challenges in field monitoring of energy performance of air conditioners

Experimental work could be conducted in either laboratory or at field site. Generally, the laboratory experiments are carried out in an artificial setting and with a highly controlled environment. By contrast, the field experiments often take place in a natural setting, subject to the influences of many uncontrolled factors. Therefore, it is necessary to carefully assess the possible limitations and appropriateness of an experiment before embarking on it. In this paper, a case study of field monitoring of the energy performance of air conditioners is presented. Significant challenges facing the experimental work are described. Lessons learnt from this case study are also discussed. In particular, it was found that on-going analysis of the monitoring data and the correction of abnormal issues are two of the keys for a successful field test program. It was also shown that the installation of monitoring systems could have a significant impact on the accuracy of the data being collected. Before monitoring system was set up to collect monitoring data, it is recommended that an initial analysis of sample monitored data should be conducted to make sure that the monitoring data can achieve the expected precision. In the case where inevitable inherent errors were induced from the installation of field monitoring systems, appropriate remediation may need to be developed and implemented for the improved accuracy of the estimation of results. On-going analysis of monitoring data and correction of any abnormal issues would be the key to a successful field test program.