Tactics for teaching evidence-based practice : improving self-efficacy in finding and appraising evidence in a master's evidence-based practice unit

Universal application of evidence-based practice (EBP) is far from a reality with many clinicians feeling ill equipped to adopt this approach in their clinical practice (Melnyk Fineout- Overholt, Feinstein, Sadler, & Green-Hernandez, 2008; Sherriff, Wallis, & Chaboyer, 2007) and, thus, to be an intelligent consumer of evidence (Ciliska, 2005). While recognizing the benefit of EBP, many health professionals have low confidence in their skills for using evidence in clinical settings (Nagy, Lumby, McKinley, &Macfarlane, 2001). Educational initiatives are often recommended for promoting adoption of EBP with much of the focus being on providing knowledge of associated processes. Levin, Melnyk, Fineout-Overholt, Barnes, and Vetter (2011) demonstrated that providing knowledge of EBP process alone does not increase clinicians’ confidence in their ability to apply EBP to their practice...

Measurement of actual efficacy of compact fluorescent lamps (CFLs)

The use of compact fluorescent lamps (CFLs) in domestic residences has increased rapidly due to their higher energy efficiency and longer life expectancy when compared with traditional incandescent light bulbs. Through measurement of illuminance, actual power and apparent power, the actual efficacy and associated power factor of CFLs are studied in this paper. It is found that for an individual CFL, although its power consumption and lighting output (i.e. luminous flux) may be higher or lower than the stated values provided by the lighting manufacturers, the actual efficacy would most likely be equal to or better than the efficacy calculated from the given rated power and lumen from the manufacturers. The typical power factor for CFLs was 0.63.

Exploring variation in measurement as a foundation for statistical thinking in the elementary school

This study was based on the premise that variation is the foundation of statistics and statistical investigations. The study followed the development of fourth-grade students' understanding of variation through participation in a sequence of two lessons based on measurement. In the first lesson all students measured the arm span of one student, revealing pathways students follow in developing understanding of variation and linear measurement (related to research question 1). In the second lesson each student's arm span was measured once, introducing a different aspect of variation for students to observe and contrast. From this second lesson, students' development of the ability to compare their representations for the two scenarios and explain differences in terms of variation was explored (research question 2). Students' documentation, in both workbook and software formats, enabled us to monitor their engagement and identify their increasing appreciation of the need to observe, represent, and contrast the variation in the data. Following the lessons, a written student assessment was used for judging retention of understanding of variation developed through the lessons and the degree of transfer of understanding to a different scenario (research question 3).

Direct measurement as a tool for assessing the accuracy of inverse dynamics

The understanding of the loads generated within the prosthetic leg can aid engineers in the design of components and clinicians in the process of rehabilitation. Traditional methods to assess these loads have relied on inverse dynamics. This indirect method estimates the applied load using video recordings and force-plates located at a distance from the region of interest, such as the base of the residuum. The well-known limitations of this method are related to the accuracy of this recursive model and the experimental conditions required (Frossard et al., 2003). Recent developments in sensors (Frossard et al., 2003) and prosthetic fixation (Brånemark et al., 2000) permit the direct measurement of the loads applied on the residuum of transfemoral amputees. In principle, direct measurement should be an appropriate tool for assessing the accuracy of inverse dynamics. The purpose of this paper is to determine the validity of this assumption. The comparative variable used in this study is the velocity of the relative body center of mass (VCOM(t)). The relativity is used to align the static (w.r.t. position) force plate measurement with the dynamic load cell measurement.

Review of direct measurement of inner prosthesis loading in transfemoral amputation: Potential benefits for evidence-based practice

The understanding of the load applied on the residuum through the prosthesis of individuals with transfemoral amputation (TFA) is essential to address a number of concerns that could strongly reduce their quality of life (e.g., residuum skin lesion, prosthesis fitting, alignment). This inner prosthesis loading could be estimated using a typical gait laboratory relying on inverse dynamics equations. Alternative, technological advances proposed over the last decade enabled direct measurement of this kinetic information in a broad variety of situations that could potentially be more relevant in clinical settings. The purposes of this presentation are (A) to review the literature about recent developments in measure and analyses of inner prosthesis loading of TFA, and (B) to extract information that could potentially contribute to a better evidence-based practice.

Affordances of ICTs: an environmental study of a French language unit offered at university level

This project investigates the integration of Information Communication Technologies (ICTs) into educational settings by closely looking at the uptake of the perceived affordances offered by ICTs by students enrolled in a French language course at Queensland University of Technology. This cross-disciplinary research uses the theoretical concepts of: Ecological Psychology (Gibson, 1979; Good, 2007; Reed, 1996); Ecological Linguistics (Greeno, 1994; Leather & van Dam, 2003; van Lier 2000, 2003, 2004a, 2004b); Design (Norman, 1988, 1999); Software Design/ Human-Computer Interaction (Hartson, 2003; McGrenere & Ho, 2000); Learning Design (Conole & Dyke, 2004a, 2004b; Laurillard et al. 2000;); Education (Kirschner, 2002; Salomon, 1993; Wijekumar et al., 2006) and Educational Psychology (Greeno, 1994). In order to investigate this subject, the following research questions, rooted in the theoretical foundations of the thesis, were formulated: (1) What are the learners’ attitudes towards the ICT tools used in the project?; (2) What are the affordances offered by ICTs used in a specific French language course at university level from the perspective of the teacher and from the perspective of language learners?; (3) What affordances offered by ICT tools used by the teacher within the specific teaching and learning environment have been taken up by learners?; and (4) What factors influence the uptake by learners of the affordances created by ICT tools used by the teacher within the specific teaching and learning environment? The teaching phase of this project, conducted between 2006 and 2008, used Action Research procedures (Hopkins, 2002; McNiff & Whitehead, 2002; van Lier 1994) as a research framework. The data were collected using the following combination of qualitative and quantitative methods: (1) questionnaires administered to students (Hopkins, 2002; McNiff & Whitehead, 2002) using Likert-scale questions, open questions, yes/no questions; (2) partnership classroom observations of research participants conducted by Research Participant Advocates (Hopkins, 2002; McNiff & Whitehead, 2002); and (3) a focus group with volunteering students who participated in the unit (semi-structured interview) (Hopkins, 2002; McNiff & Whitehead, 2002). The data analysis confirms the importance of a careful examination of the teaching and learning environment and reveals differences in the ways in which the opportunities for an action offered by the ICTs were perceived by teacher and students, which impacted on the uptake of affordances. The author applied the model of affordance, as described by Good (2007), to explain these differences and to investigate their consequences. In conclusion, the teacher-researcher considers that the discrepancies in perceiving the affordances result from the disparities between the frames of reference and the functional contexts of the teacher-researcher and students. Based on the results of the data analysis, a series of recommendations is formulated supporting calls for careful analysis of frames of reference and the functional contexts of all participants in the learning and teaching process. The author also suggests a modified model of affordance, outlining the important characteristics of its constituents.

Direct measurement of prosthetic loading for evidence-based practice

The demand for an evidence-based clinical practice involving lower limb amputees is increasing. Some of the critical care decisions are related to the loading applied on the residuum partially responsible for comfort and functional outcome. This loading can be assessed using inverse dynamics equations. Typically, this method requires a gait laboratory (e.g., 3D motion analysis system, force-plates). It is mainly suited for the analysis only few steps of walking while being expensive and labour intensive. However, recent scientific and industrial developments demonstrated that discrete and light portable sensors can be placed within the prosthesis to measure accurately the loading during an unlimited number of steps and activities of daily living. Several studies indicated that method based on direct measurements might provide more realistic results. Furthermore, it is a user-friendly method more accessible to clinicians, such as prosthetists. The purpose of this symposium will be to give an overview of these additional opportunities for clinicians to obtain relevant data for evidence-based practice. The three main aims will be: • To present some of the equipment used for direct measurements, • To propose ways to analyse some key data sets, • To give some practical example of data sets for transtibial and transfemoral amputees.

Saudi Arabian adult intensive care unit pressure ulcer incidence and risk factors: A prospective cohort study

The purpose of this study was to identify pressure ulcer (PU) incidence and risk factors that are associated with PU development in patients in two adult intensive care units (ICU) in Saudi Arabia. A prospective cohort study design was used. A total of 84 participants were screened second daily basis until discharge or death, over a consecutive 30-day period, out of which 33 participants with new PUs were identified giving a cumulative hospital-acquired PU incidence of 39·3% (33/84 participants). The incidence of medical devices-related PUs was 8·3% (7/84). Age, length of stay in the ICU, history of cardiovascular disease and kidney disease, infrequent repositioning, time of operation, emergency admission, mechanical ventilation and lower Braden Scale scores independently predicted the development of a PU. According to binary logistic regression analyses, age, longer stay in ICU and infrequent repositioning were significant predictors of all stages of PUs, while the length of stay in the ICU and infrequent repositioning were associated with the development of stages II-IV PUs. In conclusion, PU incidence rate was higher than that reported in other international studies. This indicates that urgent attention is required for PU prevention strategies in this setting.

Pilot study evaluating the effect of massage therapy on stress, anxiety and aggression in a young adult psychiatric inpatient unit

Objective: The aim of the present pilot study was to examine the effectiveness of a relaxation massage therapy programme in reducing stress, anxiety and aggression on a young adult psychiatric inpatient unit. Method: This was a prospective, non-randomized intervention study comparing treatment as usual (TAU) with TAU plus massage therapy intervention (MT) over consecutive 7 week blocks (May–August 2006). MT consisted of a 20 min massage therapy session offered daily to patients during their period of hospitalization. The Kennedy Nurses’ Observational Scale for Inpatient Evaluation (NOSIE), the Symptom Checklist-90–Revised (SCL-90-R), the State–Trait Anxiety Inventory (STAI) and stress hormone (saliva cortisol) levels were used to measure patient outcomes at admission and discharge from the unit. The Staff Observation Aggression Scale–Revised (SOAS-R) was used to monitor the frequency and severity of aggressive incidents on the unit. Results: There was a significant reduction in self-reported anxiety (p < 0.001), resting heart rate (p < 0.05) and cortisol levels (p < 0.05) immediately following the initial and final massage therapy sessions. Significant improvements in hostility (p = 0.007) and depression scores (p < 0.001) on the SCL-90-R were observed in both treatment groups. There was no group×time interaction on any of the measures. Poor reliability of staff-reported incidents on the SOAS-R limited the validity of results in this domain. Conclusions: Massage therapy had immediate beneficial effects on anxiety-related measures and may be a useful de-escalating tool for reducing stress and anxiety in acutely hospitalized psychiatric patients. Study limitations preclude any definite conclusions on the effect of massage therapy on aggressive incidents in an acute psychiatric setting. Randomized controlled trials are warranted.

Size-resolved particle distribution and gaseous concentrations by real-world road tunnel measurement

Measurements of aerosol particle number size distributions (15-700 nm), CO and NOx were performed in a bus tunnel, Australia. Daily mean particle size distributions of mixed diesel/CNG (Compressed Natural Gas) buses traffic flow were determined in 4 consecutive measurement days. EFs (Emission Factors) of Particle size distribution of diesel buses and CNG buses were obtained by MLR (Multiple Linear Regression) methods, particle distributions of diesel buses and CNG buses were observed as single accumulation mode and nuclei-mode separately. Particle size distributions of mixed traffic flow were decomposed by two log-normal fitting curves for each 30 minutes interval mean scans, all the mix fleet PSD emission can be well fitted by the summation of two log-normal distribution curves, and these were composed of nuclei mode curve and accumulation curve, which were affirmed as the CNG buses and diesel buses PN emission curves respectively. Finally, particle size distributions of diesel buses and CNG buses were quantified by statistical whisker-box charts. For log-normal particle size distribution of diesel buses, accumulation mode diameters were 74.5～87.5nm, geometric standard deviations were 1.89～1.98. As to log-normal particle size distribution of CNG buses, nuclei-mode diameters were 21～24 nm, geometric standard deviations were 1.27～1.31.

The molecular structure of chloritoid: A mid-infrared and near-infrared spectroscopic study

The mineral chloritoid collected from the argillite in the bottom of Yaopo Formation of Western Beijing was characterized by mid-infrared (MIR) and near-infrared (NIR) spectroscopy. The MIR spectra showed all fundamental vibrations including the hydroxyl units, basic aluminosilicate framework and the influence of iron on the chloritoid structure. The NIR spectrum of the chloritoid showed combination (ν + δ)OH bands with the fundamental stretching (ν) and bending (δ) vibrations. Based on the chemical component data and the analysis result from the MIR and NIR spectra, the crystal structure of chloritoid from western hills of Beijing, China, can be illustrated. Therefore, the application of the technique across the entire infrared region is expected to become more routine and extend its usefulness, and the reproducibility of measurement and richness of qualitative information should be simultaneously considered for proper selection of a spectroscopic method for the unit cell structural analysis.

Effectiveness of in-office blood pressure measurement by eye care practitioners in early detection and management of hypertension

AIM To investigate the number of hypertensive patients, the optometrist is able to identify by routinely taking blood pressure (BP) measurements for patients in "at -risk" groups, and to sample patients' opinions regarding in -office BP measurement. Many of the optometrists in Saudi Arabia practice in optical stores. These stores are wide spread, easily accessible and seldom need appointments. The expanding role of the optometrist as a primary health care provider (PHCP) and the increasing global prevalence of hypertension, highlight the need for an integrated approach towards detecting and monitoring hypertension. METHODS Automated BP measurements were made twice (during the same session) at five selected optometry practices using a validated BP monitor (Omron M6) to assess the number of patients with high BP (HBP) - in at -risk groups -visiting the eye clinic routinely. Prior to data collection, practitioners underwent a two-day training workshop by a cardiologist on hypertension and how to obtain accurate BP readings. A protocol for BP measurement was distributed and retained in all participating clinics. The general attitude towards cardiovascular health of 480 patients aged 37.2 (依12.4)y and their opinion towards in-office BP measurement was assessed using a self -administered questionnaire. RESULTS A response rate of 83.6% was obtained for the survey. Ninety -three of the 443 patients (21.0% ) tested for BP in this study had HBP. Of these, (62 subjects) 67.7% were unaware of their HBP status. Thirty of the 105 subjects (28.6%) who had previously been diagnosed with HBP, still had HBP at the time of this study, and only 22 (73.3%) of these patients were on medication. Also, only 25% of the diagnosed hypertensive patients owned a BP monitor. CONCLUSION Taking BP measurements in optometry practices, we were able to identify one previously undiagnosed patient with HBP for every 8 adults tested. We also identified 30 of 105 previously diagnosed patients whose BP was poorly controlled, twenty-two of whom were on medication. The patients who participated in this study were positively disposed toward the routine measurement of BP by optometrists.

Engaging nursing students in a bioscience unit using a web-based response system, GoSoapBox

Nursing students used GoSoapBox, a web-based student response system to poll responses to multiple choice questions (MCQs) presented during bioscience lectures. Participation in GoSoapBox appears to have facilitated student engagement, interaction and learning. The majority of students surveyed appreciated the immediate feedback to the student responses and being able to participate anonymously. The use of this tool facilitated collaborative group and class discussion and clarification around any misconceptions or challenging concepts. Information collected using GoSoapBox provided the academic with feedback allowing for reflection, adjustment and improvement in framing of formative and summative MCQs.

Facebook: A basis for forming a peer learning community for nursing students in a bioscience unit

First year nursing students commonly find bioscience to be challenging. A Facebook community site was established to support and engage these students. The site was facilitated by virtual peer mentors and the unit coordinator. The high participation rate and the strong recommendation to future students indicated that the site successfully enabled student interaction and engagement with their learning. The students found it to be a readily accessible network and valued the useful resources and learning strategies provided by their peers. The sharing of both learning challenges and successful learning practices can help students build a sense of belonging and an understanding of academic practices and behaviours that can contribute to their learning success at university.