Measuring the regional availability of biomass for biofuels and the potential for microalgae

Biomass is an important energy resource for producing bioenergy and growing the global economy whilst minimising greenhouse gas emissions. Many countries, like Australia have a huge amount of biomass with the potential for bioenergy, but non-edible feedstock resources are significantly under-exploited. Hence it is essential to map the availability of these feedstocks to identify the most appropriate bioenergy solution for each region and develop supply chains for biorefineries. Using Australia as a case study,we present the spatial availability and opportunities for second and third generation feedstocks. Considerations included current land use, the presence of existing biomass industries and climatic conditions. Detailed information on the regional availability of biomass was collected from government statistics, technical reports and energy assessments as well as from academic literature. Second generation biofuels have the largest opportunity in New South Wales, Queensland and Victoria (NSW, QLD and VIC) and the regions with the highest potential for microalgae are Western Australia and Northern Territory (WA, NT), based on land use opportunity cost and climate. The approach can be used in other countries with a similar climate. More research is needed to overcome key technical and economic hurdles.

Examining the role of wine brand love on brand loyalty: A multi-country comparison

This study develops and tests a model through a multi-country study that considers consumer wine knowledge and wine experience, wine brand trust and wine brand satisfaction as antecedents of wine brand love, and wine brand loyalty as a consequence of wine brand love. Data were collected in five wine-producing countries (Australia, Chile, France, Mexico and Portugal) with a final sample of 3462 completed surveys. Hypotheses were tested with structural equation modeling and the findings confirm the importance of brand love as both a mediator and direct influence on brand loyalty for wine consumers. Furthermore, brand satisfaction was positively and significantly related to brand love. In addition, wine experience, rather than wine knowledge, positively influenced brand trust and satisfaction. Finally, results also identify differences between countries thereby providing insights into how companies should focus their marketing strategies internationally.

Design of a tangible data visualization (extended)

In this paper we describe the design of DNA Jewelry, which is a wearable tangible data representation of personal DNA profile data. An iterative design process was followed to develop a 3D form-language that could be mapped to standard DNA profile data, with the aim of retaining readability of data while also producing an aesthetically pleasing and unique result in the area of personalised design. The work explores design issues with the production of data tangibles, contributes to a growing body of research exploring tangible representations of data and highlights the importance of approaches that move between technology, art and design.

Pentacene on Ni(111): room-temperature molecular packing and temperature-activated conversion to graphene

We investigate, using scanning tunnelling microscopy, the adsorption of pentacene on Ni(111) at room temperature and the behaviour of these monolayer films with annealing up to 700 °C. We observe the conversion of pentacene into graphene, which begins from as low as 220 °C with the coalescence of pentacene molecules into large planar aggregates. Then, by annealing at 350 °C for 20 minutes, these aggregates expand into irregular domains of graphene tens of nanometers in size. On surfaces where graphene and nickel carbide coexist, pentacene shows preferential adsorption on the nickel carbide phase. The same pentacene to graphene transformation was also achieved on Cu(111), but at a higher activation temperature, producing large graphene domains that exhibit a range of moiré superlattice periodicities.

Drivers of local food consumption: A comparative study

Purpose The aim of this paper is to empirically explore antecedents of local food purchase intention in two food producing countries with different cultural backgrounds. Design/methodology/approach An online survey was employed to collect data from consumers located in Chile (n=283) and Australia (n=300). A proposed model is tested with structural equation modelling (SEM). Findings Attitude towards consuming local food is a strong and direct driver of intentions to purchase local food in both countries. Attitude toward supporting local agri-businesses and consumer ethnocentrism are found to positively impact attitude towards consuming local food in both countries. Attitude towards local agri-businesses also has a direct effect on intentions to purchase local food in Australia, but not in Chile. Interestingly, subjective norms are not found to affect intentions to consume local food in either country. Research limitations/implications The paper examines factors affecting the attitude toward and behavioural intention regarding local food consumption and develops an extended model of local food consumption. An outcome of this new model is the inclusion of personal variables, which influence local food purchasing behaviour. Practical implications Producers and retailers need to develop campaigns explaining how consuming local food supports local businesses and farmers, which will reinforce personal values associated with local consumption. Originality/value This is the first study to demonstrate that positive attitudes toward local foods are important drivers of local food purchase behaviour, independent of the cultural characteristics or level of economic development within a country.

Flexible learning design in curriculum delivery promotes student engagement and develops metacognitive learners: An integrated review

Historically, university students have been the passive recipients of face-to-face instructor designed and led classes (Hudson, 2014; Myers et al., 2011). Technological advancement, however, has provided an opportunity for greater flexibility around educational structure; students are starting to expectmore fromtertiary education providers, specifically around the delivery and provision of education (Myers et al., 2011). For universities to meet the ever-changing needs of the student they need to consider the integration of flexible learning designs into their curricula. The consequent willingness of the faculty to rethink the design and delivery of curricula has seen a recent shift in the design and delivery of education. As universities strive to promote student engagement, active learning, and communities of enquiry, they are moving progressively towards flexible learning models, virtual interaction and student centric curricula (Heise and Himes, 2010; Hsu and Hsieh, 2011). The challenge this shift creates is how to best engage students throughout their studies in order to produce graduates with the skills necessary for societal and professional sustainability (Castle and McGuire, 2010). Despite a wealth of literature addressing this topic, there is a paucity of substantive, conclusive outcomes as to the efficacy of its full implementation and potential for producing capable learners. This integrative review therefore aims to inform curriculum delivery that is flexible, student centric and scaffolds learning. It also aims to identify whether this approach assists in the development of metacognitive learners.

Education policy-making and time

This paper examines the global policy convergence toward high-stakes testing in schools and the use of test results to ‘steer at a distance’, particularly as it applies to policy-makers’ promise to improve teacher quality. Using Deleuze’s three syntheses of time in the context of the Australian policy blueprint Quality Education, this paper argues that using test scores to discipline teaching repeats the past habit of policy-making as continuing the problem of the unaccountable teacher. This results in local policy-making enfolding test scores in a pure past where the teacher-as-problem is resolved through the use of data from testing to deliver accountability and transparency. This use of the database returns a digitised form of inspection that is a repetition of the habit of teacher-as-problem. While dystopian possibilities are available through the database, in what Deleuze refers to as a control society, for us the challenge is to consider policy-making as a step into an unknown future, to engage with producing policy that is not grounded on the unconscious interiority of solving the teacher problem, but of imagining new ways of conceiving the relationship between policy-making and teaching.

Mathematical modelling of gas production and compositional shift of a CSG (coal seam gas) field: Local model development

In this work we discuss the development of a mathematical model to predict the shift in gas composition observed over time from a producing CSG (coal seam gas) well, and investigate the effect that physical properties of the coal seam have on gas production. A detailed (local) one-dimensional, two-scale mathematical model of a coal seam has been developed. The model describes the competitive adsorption and desorption of three gas species (CH4, CO2 and N2) within a microscopic, porous coal matrix structure. The (diffusive) flux of these gases between the coal matrices (microscale) and a cleat network (macroscale) is accounted for in the model. The cleat network is modelled as a one-dimensional, volume averaged, porous domain that extends radially from a central well. Diffusive and advective transport of the gases occurs within the cleat network, which also contains liquid water that can be advectively transported. The water and gas phases are assumed to be immiscible. The driving force for the advection in the gas and liquid phases is taken to be a pressure gradient with capillarity also accounted for. In addition, the relative permeabilities of the water and gas phases are considered as functions of the degree of water saturation.

Use of 3D printed materials as tissue-equivalent phantoms

This study used the specific example of 3D printing with acrylonitrile butadiene styrene (ABS) as a means to investigate the potential usefulness of benchtop rapid prototyping as a technique for producing patient specific phantoms for radiotherapy dosimetry. Three small cylinders and one model of a human lung were produced via in-house 3D printing with ABS, using 90%, 50%, 30% and 10% ABS infill densities. These phantom samples were evaluated in terms of their geometric accuracy, tissue equivalence and radiation hardness, when irradiated using a range of clinical radiotherapy beams. The measured dimensions of the small cylindrical phantoms all matched their planned dimensions, within 1mm. The lung phantom was less accurately matched to the lung geometry on which it was based, due to simplifications introduced during the phantom design process. The mass densities, electron densities and linear attenuation coefficients identified using CT data, as well as the results of film measurements made using megavoltage photon and electron beams, indicated that phantoms printed with ABS, using infill densities of 30% or more, are potentially useful as lung- and tissue-equivalent phantoms for patient-specific radiotherapy dosimetry. All cylindrical 3D printed phantom samples were found to be unaffected by prolonged radiation and to accurately match their design specifications. However, care should be taken to avoid oversimplifying anatomical structures when printing more complex phantoms.

The valley of the dolls: Brand protection and artistic parody

In the case of Mattel Inc v Walking Mountain Productions, the toy doll manufacturer Mattel sought to prohibit a Utah photographer called Thomas Forsythe from producing and selling a series of 78 photographs entitled "Food Chain Barbie". The work had strong social and political overtones. The artist said that he chose to parody Barbie in his photographs because he wanted to challenge the beauty myth and the objectification of women. He observed: "Barbie is the most enduring of those products that feed on the insecurities of our beauty and perfection-obsessed consumer culture." The company Mattel argued that the photographs infringed its copyrights, trade marks, and trade dress. It was concerned that the artistic works would erode the brand of Barbie by wrongfully sexualising its blonde paragon of womanhood. However, Lew J of the Central District Court of California granted summary judgment for the photographer. The Court of Appeals upheld this verdict. Pregerson J held that the use of the manufacturer's copyrighted doll in parodic photographs constituted a fair use of copyright works. His Honour held that the use of manufacturer's "Barbie" mark and trade dress did not amount to trade mark infringement or dilution. This article provides a case commentary upon the Court of Appeals decision in Mattel Inc v Walking Mountain Productions, and its wider ramifications for the treatment of artistic parody under copyright law and trade mark law. It contends that the decision highlights the need for reform in Australian jurisprudence and legislation in respect of artistic parody.

Exercise, Appetite Control, and Body Weight Regulation

Exercise has many health benefits and should be an effective weight loss strategy because it increases energy expenditure. However, the success of exercise in producing and sustaining weight loss is influenced by compensatory changes in energy intake and non-exercise activity, among other factors (see King et al. Obesity 15(6):1373–1383, 2007 for a detailed review). The aim of this chapter is to discuss the evidence describing the relationship between exercise and body weight regulation, with a particular focus on appetite control. Evidence is discussed which demonstrates that weight loss responses to exercise are highly variable between individuals. The mechanisms underlying the relationship between exercise, appetite and energy intake, and hence body weight are also discussed. Some people experience an increase in fasting hunger in response to 12 weeks of supervised exercise. However, this is offset by an increase in meal-related satiety in overweight and obese individuals. It is worth noting that weight loss should not be considered as the only successful outcome of an exercise program. Indeed, exercise, even in the absence of weight loss, is associated with numerous health benefits. Nevertheless, an improved understanding of compensatory responses to exercise is vital so that exercise can be more effectively used in weight management; such an understanding may assist us to devise strategies to sustain greater long-term participation in physical activity.

The Trans-Pacific Partnership: Copyright Law, the Creative Industries, and Internet Freedom

The Trans-Pacific Partnership (TPP) is a highly secretive trade agreement being negotiated between the US and eleven Pacific Rim countries, including Australia. Having obtained a fast-track authority from the United States Congress, US President Barack Obama is keen to finalise the deal. However, he was unable to achieve a resolution of the deal at recent talks in Hawaii on the TPP. A number of chapters of the TPP will affect the creative artists, cultural industries and internet freedom — including the intellectual property chapter, the investment chapter, and the electronic commerce chapter. Legacy copyright industries have pushed for longer and stronger copyright protection throughout the Pacific Rim. In the wake of the Hawaii talks, Knowledge Ecology International leaked the latest version of the intellectual property chapter of the TPP. Jamie Love of Knowledge Ecology International commented upon the leaked text about copyright law: ‘In many sections of the text, the TPP would change global norms, restrict access to knowledge, create significant financial risks for persons using and sharing information, and, in some cases, impose new costs on persons producing new knowledge goods.’ The recent leaked text reveals a philosophical debate about the nature of intellectual property law. There are mixed messages in respect of the treatment of the public domain under copyright law. In one part of the agreement on internet service providers, there is text that says that the parties recognise the need for ‘promoting innovation and creativity,’ ‘facilitating the diffusion of information, knowledge, technology, culture, and the arts’, and ‘foster competition and open and efficient markets.’ A number of countries suggested ‘acknowledging the importance of the public domain.’ The United States and Japan opposed the recognition of the public domain in this text.

Enrichment of circulating interleukin-17-secreting interleukin-23 receptor-positive γ/δ T cells in patients with active ankylosing spondylitis

Objective Ankylosing spondylitis (AS) is a common inflammatory arthritis affecting primarily the axial skeleton. IL23R is genetically associated with AS. This study was undertaken to investigate and characterize the role of interleukin-23 (IL-23) signaling in AS pathogenesis. Methods The study population consisted of patients with active AS (n = 17), patients with psoriatic arthritis (n = 8), patients with rheumatoid arthritis, (n = 9), and healthy subjects (n = 20). IL-23 receptor (IL-23R) expression in T cells was determined in each subject group, and expression levels were compared. Results The proportion of IL-23R-expressing T cells in the periphery was 2-fold higher in AS patients than in healthy controls, specifically driven by a 3-fold increase in IL-23R-positive γ/δ T cells in AS patients. The proportions of CD4+ and CD8+ cells that were positive for IL-17 were unchanged. This increased IL-23R expression on γ/δ T cells was also associated with enhanced IL-17 secretion, with no observable IL-17 production from IL-23R-negative γ/δ T cells in AS patients. Furthermore, γ/δ T cells from AS patients were heavily skewed toward IL-17 production in response to stimulation with IL-23 and/or anti-CD3/CD28. Conclusion Recently, mouse models have shown IL-17-secreting γ/δ T cells to be pathogenic in infection and autoimmunity. Our data provide the first description of a potentially pathogenic role of these cells in a human autoimmune disease. Since IL-23 is a maturation and growth factor for IL-17-producing cells, increased IL-23R expression may regulate the function of this putative pathogenic γ/δ T cell population.

Immunogenetic characteristics of immunoglobulin E in allergic disease

Patients with allergic diseases produce an excess of allergen-specific IgE, the specific effector molecule that triggers allergic reactions. The provocation for this excess IgE production is still uncertain. Current ideas include oligoclonal expansion of allergen-specific B cells emanating from germinal centres, activation by superantigen of a subset of B cells, or polyclonal B cells class switching to IgE due to an IL-4 predominance. Additionally, genetic elements contribute to a propensity for increased allergen-specific IgE production. The procedure of RT-PCR allows for amplification of infrequent IgE mRNA transcripts from B cells of atopic individuals, and so facilitates examination of expressed Ig cDNA sequences. Better knowledge of the molecular characteristics of IgE produced by patients with allergic diseases would elucidate the immunogenetic basis for elevated allergen-specific IgE levels. The 'immunogenetic footprint' of IgE transcripts may elucidate the origin and activation of IgE-producing B cells in allergic disease. Here we review studies of the immunogenetic features of IgE in allergic diseases, highlighting the major advances and the experimental limitations.

Exploring accuracy factors in cost estimating practice towards implementing Building Information Modelling (BIM)

Cost estimating has been acknowledged as a crucial component of construction projects. Depending on available information and project requirements, cost estimates evolve in tandem with project lifecycle stages; conceptualisation, design development, execution and facility management. The premium placed on the accuracy of cost estimates is crucial to producing project tenders and eventually in budget management. Notwithstanding the initial slow pace of its adoption, Building Information Modelling (BIM) has successfully addressed a number of challenges previously characteristic of traditional approaches in the AEC, including poor communication, the prevalence of islands of information and frequent reworks. Therefore, it is conceivable that BIM can be leveraged to address specific shortcomings of cost estimation. The impetus for leveraging BIM models for accurate cost estimation is to align budgeted and actual cost. This paper hypothesises that the accuracy of BIM-based estimation, as more efficient, process-mirrors of traditional cost estimation methods, can be enhanced by simulating traditional cost estimation factors variables. Through literature reviews and preliminary expert interviews, this paper explores the factors that could potentially lead to more accurate cost estimates for construction projects. The findings show numerous factors that affect the cost estimates ranging from project information and its characteristic, project team, clients, contractual matters, and other external influences. This paper will make a particular contribution to the early phase of BIM-based project estimation.