Generalized element load method for first- and second-order element solutions with element load effect

The finite element method in principle adaptively divides the continuous domain with complex geometry into discrete simple subdomain by using an approximate element function, and the continuous element loads are also converted into the nodal load by means of the traditional lumping and consistent load methods, which can standardise a plethora of element loads into a typical numerical procedure, but element load effect is restricted to the nodal solution. It in turn means the accurate continuous element solutions with the element load effects are merely restricted to element nodes discretely, and further limited to either displacement or force field depending on which type of approximate function is derived. On the other hand, the analytical stability functions can give the accurate continuous element solutions due to element loads. Unfortunately, the expressions of stability functions are very diverse and distinct when subjected to different element loads that deter the numerical routine for practical applications. To this end, this paper presents a displacement-based finite element function (generalised element load method) with a plethora of element load effects in the similar fashion that never be achieved by the stability function, as well as it can generate the continuous first- and second-order elastic displacement and force solutions along an element without loss of accuracy considerably as the analytical approach that never be achieved by neither the lumping nor consistent load methods. Hence, the salient and unique features of this paper (generalised element load method) embody its robustness, versatility and accuracy in continuous element solutions when subjected to the great diversity of transverse element loads.

Novel non-linear elastic structural analysis with generalised transverse element loads using a refined finite element

In the finite element modelling of structural frames, external loads such as wind loads, dead loads and imposed loads usually act along the elements rather than at the nodes only. Conventionally, when an element is subjected to these general transverse element loads, they are usually converted to nodal forces acting at the ends of the elements by either lumping or consistent load approaches. In addition, it is especially important for an element subjected to the first- and second-order elastic behaviour, to which the steel structure is critically prone to; in particular the thin-walled steel structures, when the stocky element section may be generally critical to the inelastic behaviour. In this sense, the accurate first- and second-order elastic displacement solutions of element load effect along an element is vitally crucial, but cannot be simulated using neither numerical nodal nor consistent load methods alone, as long as no equilibrium condition is enforced in the finite element formulation, which can inevitably impair the structural safety of the steel structure particularly. It can be therefore regarded as a unique element load method to account for the element load nonlinearly. If accurate displacement solution is targeted for simulating the first- and second-order elastic behaviour on an element on the basis of sophisticated non-linear element stiffness formulation, the numerous prescribed stiffness matrices must indispensably be used for the plethora of specific transverse element loading patterns encountered. In order to circumvent this shortcoming, the present paper proposes a numerical technique to include the transverse element loading in the non-linear stiffness formulation without numerous prescribed stiffness matrices, and which is able to predict structural responses involving the effect of first-order element loads as well as the second-order coupling effect between the transverse load and axial force in the element. This paper shows that the principle of superposition can be applied to derive the generalized stiffness formulation for element load effect, so that the form of the stiffness matrix remains unchanged with respect to the specific loading patterns, but with only the magnitude of the loading (element load coefficients) being needed to be adjusted in the stiffness formulation, and subsequently the non-linear effect on element loadings can be commensurate by updating the magnitude of element load coefficients through the non-linear solution procedures. In principle, the element loading distribution is converted into a single loading magnitude at mid-span in order to provide the initial perturbation for triggering the member bowing effect due to its transverse element loads. This approach in turn sacrifices the effect of element loading distribution except at mid-span. Therefore, it can be foreseen that the load-deflection behaviour may not be as accurate as those at mid-span, but its discrepancy is still trivial as proved. This novelty allows for a very useful generalised stiffness formulation for a single higher-order element with arbitrary transverse loading patterns to be formulated. Moreover, another significance of this paper is placed on shifting the nodal response (system analysis) to both nodal and element response (sophisticated element formulation). For the conventional finite element method, such as the cubic element, all accurate solutions can be only found at node. It means no accurate and reliable structural safety can be ensured within an element, and as a result, it hinders the engineering applications. The results of the paper are verified using analytical stability function studies, as well as with numerical results reported by independent researchers on several simple frames.

Structural and electronic properties of layered arsenic and antimony arsenide

Layered materials exhibit intriguing electronic characteristics and the search for new types of two-dimensional (2D) structures is of importance for future device fabrication. Using state-of-art first principle calculations, we identify and characterize the structural and electronic properties of two 2D layered arsenic materials, namely, arsenic and its alloy AsSb. The stable 2D structural configuration of arsenic is confirmed to be the low-buckled two-dimensional hexagonal structure by phonon and binding energy calculations. The monolayer exhibits indirect semiconducting properties with gap around 1.5 eV (corrected to 2.2 eV by hybrid function), which can be modulated into a direct semiconductor within a small amount of tensile strain. These semiconducting properties are preserved when cutting into 1D nanoribbons, but the band gap is edge dependent. It is interesting to find that an indirect to direct gap transition can be achieved under strain modulation of the armchair ribbon. Essentially the same phenomena can be found in layered AsSb, except a weak Rashba induced band splitting is present in AsSb due to the nonsymmetric structure and spin orbit coupling. When an additional layer is added on the top, a semiconductor–metal transition will occur. The findings here broaden the family of 2D materials beyond graphene and transition metal dichalcogenides and provide useful information for experimental fabrication of new layered materials with possible application in optoelectronics.

Devenir plurilingue : la perspective des littératies multiples

Abstract - English Multiple literacies refers to reading, reading the world and self. This article proposes an understanding of reading that goes beyond its definition in psychology and applied linguistics. This longitudinal project is interested in a conceptualisation of what reading is, how it functions and what it produces in becoming multilingual. Reading is explored through the lens of an empirical study involving five female pupils from senior Kindergarten to Grade 3 observed and interviewed in relation to activities at school and at home. The study took place in Ottawa schools where French is the sole language of instruction. Reading in the context of multiple literacies is conceptualised to disrupt /deterritorialise and to be immanent, offering the potentiality to go beyond what is to what could be. Becoming multilingual is a continuous movement involving networks of rhizomatic connections and reading the world and self. Résumé - Francais Les littératies multiples se réfèrent à la lecture, la lecture du monde et la lecture de soi. Cet article propose une compréhension de la lecture qui dépasse sa définition usuelle en psychologie et en linguistique appliquée. Ce projet longitudinal porte sur la conceptualisation de la lecture, son fonctionnement et ce qu’elle produit dans le devenir plurilingue. La lecture est examinée selon l’optique d’une étude empirique durant laquelle cinq écolières du jardin d’enfants à la 3e année étaient observées et interviewées par rapport à des activités à l’école et à la maison. L’étude a eu lieu dans des écoles d’Ottawa dont la seule langue d’enseignement est le français. Dans le contexte des littératies multiples, la lecture est conceptualisée comme étant perturbatrice/déterritorialisante et immanente. Elle offre la potentialité d’aller au-delà de ce qui est vers ce qui pourrait être. Devenir plurilingue est un mouvement continu faisant appel à des réseaux de connexions rhizomatiques et à la lecture du monde et de soi.

Direct measurement as a tool for assessing the accuracy of inverse dynamics

The understanding of the loads generated within the prosthetic leg can aid engineers in the design of components and clinicians in the process of rehabilitation. Traditional methods to assess these loads have relied on inverse dynamics. This indirect method estimates the applied load using video recordings and force-plates located at a distance from the region of interest, such as the base of the residuum. The well-known limitations of this method are related to the accuracy of this recursive model and the experimental conditions required (Frossard et al., 2003). Recent developments in sensors (Frossard et al., 2003) and prosthetic fixation (Brånemark et al., 2000) permit the direct measurement of the loads applied on the residuum of transfemoral amputees. In principle, direct measurement should be an appropriate tool for assessing the accuracy of inverse dynamics. The purpose of this paper is to determine the validity of this assumption. The comparative variable used in this study is the velocity of the relative body center of mass (VCOM(t)). The relativity is used to align the static (w.r.t. position) force plate measurement with the dynamic load cell measurement.

GABAa receptors contribute to synaptic integration in lateral amygdala neurons

In classical fear conditioning a neutral conditioned stimulus (CS) such as a tone, is paired with an aversive unconditioned stimulus (US) such as a shock. The CS thereby acquires the capacity to elicit a fear response. This type of associative learning is thought to require co-activation of principle neurons in the lateral nucleus of the amygdala (LA) by two sets of synaptic inputs, a weak CS and a strong US...

Specificity and context in post-exercise recovery: It is not a one-size-fits-all approach

The concept of specificity of exercise prescription and training is a longstanding and widely accepted foundation of the exercise sciences. Simply, the principle holds that training adaptations are achieved relative to the stimulus applied. That is, the manipulation of training variables (e.g. intensity or loading, mode, volume and frequency) directly influences the acute training stimulus, and so the long-term adaptive response (Young et al., 2001; Bird et al., 2005). Translating this concept to practice then recommends that exercise be prescribed specific to the desired outcomes, and the more closely this is achieved, the greater the performance gain is likely to be. However, the cardiovascular and metabolic adaptations traditionally associated with long, slow distance training types, similarly achieved using high-intensity training methods (for a review see Gibala et al., 2012), highlights understanding of underlying physiology as paramount for effective training program design. Various other factors including illness, sleep and psychology also impact on the training stimulus (Halson, 2014) and must be managed collectively with appropriate post-exercise recovery to continue performance improvements and reduce overtraining and injury risks (Kenttä and Hassmén, 1998).

Experimental and statistical investigation of Australian native plants for second-generation biodiesel production

This work explores the potential of Australian native plants as a source of second-generation biodiesel for internal combustion engines application. Biodiesels were evaluated from a number of non-edible oil seeds which are grow naturally in Queensland, Australia. The quality of the produced biodiesels has been investigated by several experimental and numerical methods. The research methodology and numerical model developed in this study can be used for a broad range of biodiesel feedstocks and for the future development of renewable native biodiesel in Australia.

Saliva diagnostics for oral diseases

Oral diseases, or stomatognathic diseases, denote the diseases of the mouth (“stoma”) and jaw (“gnath”). Dental caries and periodontal diseases have been traditionally considered as the most important global oral health burdens. It is important to note that in oral diagnostics, the greatest challenges are determining the clinical utility of potential biomarkers for screening (in asymptomatic people), predicting the early onset of disease (prognostic tests), and evaluating the disease activity and the efficacy of therapy through innovative diagnostic tests. An oral diagnostic test, in principle, should provide valuable information for differential diagnosis, localization of disease, and severity of infection. This information can then be incorporated by the physician when planning treatments and will provide means for assessing the effectiveness of therapy.

A hierarchical model of social marketing

Purpose This paper aims to set out a new hierarchical and differentiated model of social marketing principles, concepts and techniques that builds on, but supersedes, the existing lists of non-equivalent and undifferentiated benchmark criteria. Design/methodology/approach This is a conceptual paper that proposes a hierarchical model of social marketing principles, concepts and techniques. Findings This new delineation of the social marketing principle, its four core concepts and five techniques, represents a new way to conceptualize and recognize the different elements that constitute social marketing. This new model will help add to and further the development of the theoretical basis of social marketing, building on the definitional work led by the International Social Marketing Association (iSMA), Australian Association of Social Marketing (AASM) and European Social Marketing Association (ESMA). Research limitations/implications This proposed model offers a foundation for future research to expand upon. Further research is recommended to empirically test the proposed model. Originality/value This paper seeks to advance the theoretical base of social marketing by making a reasoned case for the need to differentiate between principles, concepts and techniques when seeking to describe social marketing.

The Australian curriculum: The arts - intent and big ideas for implementation

For the first time all Australian students having an entitlement to be engaged in all five art forms in Primary school. The Australian Curriculum: The Arts is based on the principle that all young Australians are entitled to engage fully in all the major art forms and to be given a balanced and substantial foundation in the special knowledge and skills base of each. This will have enormous implication on the expectations of what can be achieved in secondary schools, in tertiary institutions and ultimately on the cultural life and heritage for Australia.

Is Merit on the Agenda? Approaches to Recruitment and Promotion in Australian Organisations

Employment on the basis of merit is the foundation of Australia’s equal opportunity legislation, beginning with the Affirmative Action (Equal Opportunity for Women) Act 1986, and continuing through the Equal Opportunity for Women in the Workplace Act 1999 to the Workplace Gender Equality Act 2012, all of which require organisations with more than 100 employees to produce an organisational program promoting employment equity for women (WGEA 2014a; Strachan, Burgess & Henderson 2007). The issue of merit was seen as critically important to the objectives of the original 1986 Act and the Affirmative Action Agency produced two monographs in 1988 written by Clare Burton: Redefining Merit (Burton 1988a) and Gender Bias in Job Evaluation (Burton 1988b) which provided practical advice. Added to this, in 1987 the Australian Government Publishing Service published Women’s Worth: Pay Equity and Job Evaluation in Australia (Burton, Hag & Thompson 1987). The equity programs set up under the 1986 legislation aimed to ‘eliminate discriminatory employment practices and to promote equal employment opportunities for women’ and this was ‘usually understood to mean that the merit principle forms the basis of appointment to positions and for promotion’ (Burton 1988a, p. 1).

High-throughput bone and cartilage micropellet manufacture, followed by assembly of micropellets into biphasic osteochondral tissue

Engineered biphasic osteochondral tissues may have utility in cartilage defect repair. As bone-marrow-derived mesenchymal stem/stromal cells (MSC) have the capacity to make both bone-like and cartilage-like tissues, they are an ideal cell population for use in the manufacture of osteochondral tissues. Effective differentiation of MSC to bone-like and cartilage-like tissues requires two unique medium formulations and this presents a challenge both in achieving initial MSC differentiation and in maintaining tissue stability when the unified osteochondral tissue is subsequently cultured in a single medium formulation. In this proof-of-principle study, we used an in-house fabricated microwell platform to manufacture thousands of micropellets formed from 166 MSC each. We then characterized the development of bone-like and cartilage-like tissue formation in the micropellets maintained for 8–14 days in sequential combinations of osteogenic or chondrogenic induction medium. When bone-like or cartilage-like micropellets were induced for only 8 days, they displayed significant phenotypic changes when the osteogenic or chondrogenic induction medium, respectively, was swapped. Based on these data, we developed an extended 14-day protocol for the pre-culture of bone-like and cartilage-like micropellets in their respective induction medium. Unified osteochondral tissues were formed by layering 12,000 osteogenic micropellets and 12,000 chondrogenic micropellets into a biphasic structure and then further culture in chondrogenic induction medium. The assembled tissue was cultured for a further 8 days and characterized via histology. The micropellets had amalgamated into a continuous structure with distinctive bone-like and cartilage-like regions. This proof-of-concept study demonstrates the feasibility of micropellet assembly for the formation of osteochondral-like tissues for possible use in osteochondral defect repair.

Submission to Senate Standing Committee on Legal and Constitutional Affairs on the Copyright Amendment (Online Infringement) Bill 2015

We argue that safeguards are necessary to ensure human rights are adequately protected. All systems of blocking access to online content necessarily raise difficult and problematic issues of infringement of freedom of speech and access to information. Given the importance of access to information across the breadth of modern life, great care must be taken to ensure that any measures designed to protect copyright by blocking access to online locations are proportionate. Any measures to block access to online content must be carefully tailored to avoid serious and disproportionate impact on human rights. This means first that the measures must be effective and adapted to achieve a legitimate purpose. The experience of foreign jurisdictions suggests that this legislation is unlikely to be effective. Unless and until there is clear evidence that the proposed scheme is likely to increase effective returns to Australian creators, this legislation should not be introduced. Second, the principle of proportionality requires ensuring that the proposed legislation does not unnecessarily burden legitimate speech or access to information. As currently worded, the draft legislation may result in online locations being blocked even though they would, if operated in Australia, not contravene Australian law. This is unacceptable, and if introduced, the law should be drafted so that it is clearly limited only to foreign locations where there is clear and compelling evidence that the location would authorise copyright infringement if it were in Australia. Third, proportionality requires that measures are reasonable and strike an appropriate balance between competing interests. This draft legislation provides few safeguards for the public interest or the interests of private actors who would access legitimate information. New safeguards should be introduced to ensure that the public interest is well represented at both the stage of the primary application and at any applications to rescind or vary injunctions. We recommend that: The legislation not be introduced unless and until there is compelling evidence that it will have a real and significant positive impact on the effective incomes of Australian creators. The ‘facilitates an infringement’ test in s 115A(1)(b) should be replaced with ‘authorises infringement’. The ‘primary purpose’ test in s 115A(1)(c) should be replaced with: “the online location has no substantial non-infringing uses”. An explicit role for public interest groups as amici curiae should be introduced. Costs of successful applications should be borne by applicants. Injunctions should be valid only for renewable two year terms. Section 115A(5) should be clarified, and cl (b) and (c) be removed. The effectiveness of the scheme should be evaluated in two years.

Race, the senses, and the materials of writing practices

The paper is a critical argument foregrounding race, the senses, and the materials of literacy practices. The author argues that counter-colonial literacies in the contemporary times require openly acknowledgement of the influences of white imperialism and racism in dominant schooling practices. The first concern is narrow conceptions of literacy and schooling that follow a white racial script, and which function as a form of historical reproduction, control, and privilege. The second is the need to acknowledge the need to rediscover the sensory nature of literacy practices that is intrinsic to many cultures, and which is transformed in human interactions with new digital forms of textual production. The final argument is the need to attend to the materiality of literacy practices, including the meanings connected to the material ecology. This principle is particularly relevant to Indigenous culture and experience, but likewise, to all digital environments where the materials of literacy practices are continually shifting.