Modulation and control of three-phase paralleled Z-source inverters for distributed generation applications

This paper presents a modulation and controller design method for paralleled Z-source inverter systems applicable for alternative energy sources like solar cells, fuel cells, or variablespeed wind turbines with front-end diode rectifiers. A modulation scheme is designed based on simple shoot-through principle with interleaved carriers to give enhanced ripple reduction in the system. Subsequently, a control method is proposed to equalize the amount of power injected by the inverters in the grid-connected mode and also to provide reliable supply to sensitive loads onsite in the islanding mode. The modulation and controlling methods are proposed to have modular independence so that redundancy, maintainability, and improved reliability of supply can be achieved. The performance of the proposed paralleled Z-source inverter configuration is validated with simulations carried out using Matlab/Simulink/Powersim. Moreover, a prototype is built in the laboratory to obtain the experimental verifications.

The rule of law, the public interest and the management of natural resources in Australia

The statutory arrangements for the management of natural resources in Australia confer powers of decision-making upon government agencies and, at the same time, restrict how these powers are to be exercised by reference either to stated criteria or in some instances to the public interest. These restrictions perform different functions according to their structure, form and language: for example they may be in the form of jurisdictional, deliberative or purposive rules. This article reviews how the offshore resources legislation of the Commonwealth and some examples of the onshore resources legislation of Queensland address the functions performed by the public interest in determining whether there is compliance with the principle of the rule of law.

Doubly Fed Induction Generator for wind energy generation using nine-switch power converter

A Three-Phase Nine-Switch Converter (NSC) topology for Doubly Fed Induction Generator in wind energy generation is proposed in this paper. This converter topology was used in various applications such as Hybrid Electric Vehicles and Uninterruptable Power Supplies. In this paper, Nine-Switch Converter is introduced in Doubly Fed Induction Generator in renewable energy application for the first time. It replaces the conventional Back-to-Back Pulse Width Modulated voltage source converter (VSC) which composed of twelve switches in many DFIG applications. Reduction in number of switches is the most beneficial in terms of cost and power switching losses. The operation principle of Nine-Switch Converter using SPWM method is discussed. The resulting NSC performance of rotor side current control, active power and reactive control are compared with Back-to Back voltage source converter performance. DC link voltage regulation using front end converter is also presented. Finally the simulation results of DFIG performances using NSC and Back-to-Back VSC are analyzed and compared.

Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

The construction industry is one of the largest sources of carbon emissions. Manufacturing of raw materials, such as cement, steel and aluminium, is energy intensive and has considerable impact on carbon emissions level. Due to the rising recognition of global climate change, the industry is under pressure to reduce carbon emissions. Carbon labelling schemes are therefore developed as meaningful yardsticks to measure and compare carbon emissions. Carbon labelling schemes can help switch consumer-purchasing habits to low-carbon alternatives. However, such switch is dependent on a transparent scheme. The principle of transparency is highlighted in all international greenhouse gas (GHG) standards, including the newly published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication. However, there are few studies which systematically investigate the transparency requirements in carbon labelling schemes. A comparison of five established carbon labelling schemes, namely the Singapore Green Labelling Scheme, the CarbonFree (the U.S.), the CO2 Measured Label and the Reducing CO2 Label (UK), the CarbonCounted (Canada), and the Hong Kong Carbon Labelling Scheme is therefore conducted to identify and investigate the transparency requirements. The results suggest that the design of current carbon labels have transparency issues relating but not limited to the use of a single sign to represent the comprehensiveness of the carbon footprint. These transparency issues are partially caused by the flexibility given to select system boundary in the life cycle assessment (LCA) methodology to measure GHG emissions. The primary contribution of this study to the construction industry is to reveal the transparency requirements from international GHG standards and carbon labels for construction products. The findings also offer five key strategies as practical implications for the global community to improve the performance of current carbon labelling schemes on transparency.

Development of a Solar Assisted Heat Pump Desalination System

In view of the growing global demand for energy and concern expressed for environmental degradation, a clean and "free" energy source, such as solar energy, has been receiving greater attention in recent years for various applications using different techniques. The Direct Expansion Solar Assisted Heat Pump (DX-SAHP) principle is one of the most promising techniques as it makes use of both solar and ambient energy. As the system has capability to function at low temperatures, it has the potential to operate at night in the tropics. The system utilizes multi-effect distillation (MED) principle for the conversion of seawater to fresh water. An experimental setup of the DX-SAHP desalination system has been built at the Department of Mechanical Engineering, National University of Singapore (NUS). This system uses two types of flat-plate solar collectors. One is called evaporator-collector, where no glazing is used, and the efficiency varies between 80 and 90%. The other type of collector is single-glazed, where the maximum efficiency is about 60%, and it is used for feed water heating. For the heat pump cycle, refrigerant R134a is used. The present study provides a comprehensive analyses and performance evaluation of this system under different operating and meteorological conditions of Singapore. The Coefficient of Performance (COP) of the heat pump system reached a maximum value of 10. For a single effect of desalination, the system shows a Performance Ratio (PR) of around 1.3.

Investigations of dielectric monitoring on an energised transformer oil–paper insulation system

Frequency domain spectroscopy (FDS) is being used to assess the insulation condition of oil–paper power transformers. However, it has to date only been implemented on de-energised transformers, which requires the transformers to be shut down for an extended period and may cause significant costs. To solve this issue, a newly improved monitoring method based on the FDS principle is proposed to implement the dielectric measurement on energised transformers. Moreover, a chirp waveform excitation and its novel processing method are introduced. Compared with the conventional FDS results, dielectric results from the energised insulation system have higher tanδ values because of the increased losses. To further understand the insulation ageing process, the effects of the geometric capacitance are removed from the measured imaginary admittance of the insulation system to enhance the ageing signature. The resulting imaginary admittance is then shown to correlate well with the central time constant in return voltage measurements results. The proposed methods address the issues on techniques used on energised transformers and provide a clue for on-line FDS diagnostic application.

Submission to the Legal Affairs and Community Safety Committee Youth Justice and Other Legislation Amendment Bill

This submission addresses the Youth Justice and Other Legislation Amendment Bill 2014 the objectives of which are to: 1. Permit repeat offenders’ identifying information to be published and open the Children’s Court for youth justice matters involving repeat offenders; 2. Create a new offence where a child commits a further offence while on bail; 3. Permit childhood findings of guilt for which no conviction was recorded to be admissible in court when sentencing a person for an adult offence; 4. Provide for the automatic transfer from detention to adult corrective services facilities of 17 year olds who have six months or more left to serve in detention; 5. Provide that, in sentencing any adult or child for an offence punishable by imprisonment, the court must not have regard to any principle, whether under statute or at law, that a sentence of imprisonment (in the case of an adult) or detention (in the case of a child) should only be imposed as a last resort; 6. Allow children who have absconded from Sentenced Youth Boot Camps to be arrested and brought before a court for resentencing without first being given a warning; and 7. Make a technical amendment to the Youth Justice Act 1992.

‘Structuring’ judicial sentencing discretion : consistency, guidance or pandering to the punitive?

Until quite recently, most Australian jurisdictions gave statutory force to the principle of imprisonment as a sanction of last resort, reflecting its status as the most punitive sentencing option open to the court.1 That principle gave primary discretion as to whether incarceration was the most appropriate means of achieving the purpose of a sentence to the sentencing court, which received all of the information relevant to the offence, the offender and any victim(s). The disestablishment of this principle is symptomatic of an increasing erosion of judicial discretion with respect to sentencing, which appears to be resulting in some extremely punitive consequences.

Straminipilan protists : a study of their taxonomic position, morphology and abiotic stress-mediated gene expression

Thraustochytrids have become of considerable industrial and scientific interest in the past decade due to their health benefits. They have been proven to be the principle source in marine and estuarine fish diets with high percentage of long chain (LC) or polyunsaturated fatty acids (PUFA). Therefore, the oil extracted from fish for human document.forms[0].elements[13].select();consumption is rich in PUFA with high omega-3 fatty acid content. Docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) of all of the omega-3 fatty acids, are considered beneficial essential oils for humans with a wide range of health benefits. These include brain and neural development in infants, general wellbeing of adults and drug delivery through precursor molecules. They have become one of the most extensively studied organisms for industrial oil preparations as PUFA extraction from fish becomes less profitable. Many forms of these Thraustochytrid oils are being trialled for human consumption all over the world. In Australia, there has been little research performed on these organisms in the past ten years. A few Australian studies have been conducted in the form of comparative studies related to PUFA production within the related genera, but not focussed on their identification or cellular and genomic characterisation. Therefore, the main aim of this study was to investigate the morphological and genetic characteristics of Australian Thraustochytrids in order to aid in their identification and characterisation, as well as to better understand the effect of environmental conditions in the regulation of PUFA production. It was also noted that there was a knowledge gap in the preservation and total genomic DNA extraction of these organisms for the purposes of scientific research. The cryopreservation of these organisms for studies around the world follows existing generic methods. However, it is well understood that many of these generic methods attract not only high costs for chemicals, but also uses considerable storage space and other resources, all of which can be improved with new or modified approaches. In this context, a simple and inexpensive bead preservation method is described, without compromising the storage shelf life. We also describe, for the first time, the effects of culture age on the successful cryopreservation of Thraustochytrids. It was evident in the literature that DNA and RNA extractions for molecular and genetic studies of Thraustochytrids follow the classical phenol-chloroform extraction methods. It was also observed that modern protocols failed to avoid the use of phenol-chloroform rather than improving preparation and cell disruption. In order to provide a high quantity and quality DNA extraction, a modified protocol has been introduced that employs the use of modern commercial extraction kits and standard laboratory equipment. Thraustochytrids have been shown to be highly conserved in their 18S rDNA gene sequences, which is used as the current standard for identification. It was demonstrated that the 18S rDNA gene sequence limits the recognition of closely related genera or within the genera from each member. Therefore, it was proposed that another profile, such as a randomly amplified polymorphic DNA (RAPD) based profiling system, be tested for use in the characterisation of Thraustochytrids. The RAPD profiles were shown to provide a unique DNA fingerprint for each isolate and small variations in their genome were able to be detected. This method involved the use of a minimum number of standard arbitrary primers and with an increase in the number of different primers used, a very high discrimination between organisms could be achieved. However, the method was not suitable for taxonomic purposes because the results did not correlate with other taxonomic features such as morphology. Another knowledge gap was found with respect to Australian Thraustochytrid growth characteristics, in that these had not been recorded and published. In order to rectify this, a record of colony and microscopic features of 12 selected isolates was performed. The results of preliminary studies indicated that further microbiological and biochemical studies are needed for full characterisation of these organisms. This information is of great importance to bio-prospecting of new Thraustochytrids from Australian ecosystems and would allow for their accurate identification, and so permit the prediction of their PUFA capability by comparison with related genera/species. It was well recognized that environmental stress plays a role in the PUFA production and is mainly due to the reactive oxygen species as abiotic stress (Chiou et al., 2001; Okuyama et al., 2008; Shabala et al., 2009; Shabala et al., 2001). In this aspect, this study makes the first attempt towards better understanding of this phenomenon by way of the use of real-time PCR for the detection of environmental effects on the regulation of PUFA production. Three main environmental conditions including temperature, pH and oxygen availability were monitored as stress inducers. In summary, this study provides novel approaches for the preservation and handling of Thraustochytrids, their molecular biological features, taxonomy, characterisation and responses to environmental factors with respect to their oil production enzymes. The information produced from this study will prove to be vital for both industrial and scientific investigations in the future.

An urban design perspective to classify knowledge precincts : a typological analysis of global best practices

Purpose: The paper seeks to investigate emerging knowledge precincts under the urban design lens in order to identify recurrent spatial patterns of urban forms and functions to gather an understanding of physical aspects that contribute to the creation of place quality. Scope: This paper focuses on the physical design and layout of specific precincts. Although socio-economic and other factors come into play imparting the distinctiveness; this paper only focuses on the spatial dimensions. Method: The research first develops a design typology framework through the lead of literature, and then utilizes it to identify recurrent elements in knowledge precinct design in order to develop taxonomy of patterns and layouts. Results: The research reported in this paper provides preliminary insights into the various form and functional factors playing role in the design of knowledge precincts and evaluates the elements that contribute to the success of these urban interventions. Recommendations: The paper recommends the use of particular design-based solutions in order to enhance the place making in knowledge precincts. Conclusions: The study concludes that despite the locational, regulatory and other contextual differences, the underlying driving principle of providing place quality to people leads to the emergence of identifiable spatial patterns across the knowledge precincts.

Determination of glutathione transferase (GSTT1-1) activities in different tissues based on formation of radioactive metabolites using 35S-glutathione

A new system has been developed to determine enzyme activities of glutathione transferase θ (GSTT1-1) based on radiometric product detection resulting from the enzymic reaction of methyl chloride with 35S-labelled glutathione. In principle, the method is universally applicable for determination of glutathione transferase activities towards a multiplicity of substrates. The method distinguishes between erythrocyte GSTT1-1 activities of human 'non-conjugators', 'low conjugators' and 'high conjugators'. Application to cytosol preparations of livers and kidneys of male and female Fischer 344 and B6C3F1 mice reveals differential GSTT1-1 activities in hepatic and renal tissues. These ought to be considered in species-specific modellings of organ toxicities of chlorinated hydrocarbons.

Bridging the gap: Early warning, gender and the responsibility to protect

Women, Peace and Security (WPS) scholars and practitioners have expressed reservations about the Responsibility to Protect (R2P) principle because of its popular use as a synonym for armed humanitarian intervention. On the other hand, R2P’s early failure to engage with and advance WPS efforts such as United Nations Security Council (UNSC) resolution 1325 (2000) has seen the perpetuation of limited roles ascribed to women in implementing the R2P principle. As a result, there has been a knowledge and practice gap between the R2P and WPS agendas, despite the fact that their advocates share common goals in relation to the prevention of atrocities and protection of populations. In this article we propose to examine just one of the potential avenues for aligning the WPS agenda and R2P principle in a way that is beneficial to both and strengthens the pursuit of a shared goal – prevention. We argue that the development and inclusion of gender-specific indicators – particularly economic, social and political discriminatory practices against women – has the potential to improve the capacity of early warning frameworks to forecast future mass atrocities.

Exploring location-dependency in process modeling

Purpose – Context-awareness has emerged as an important principle in the design of flexible business processes. The goal of the research is to develop an approach to extend context-aware business process modeling toward location-awareness. The purpose of this paper is to identify and conceptualize location-dependencies in process modeling. Design/methodology/approach – This paper uses a pattern-based approach to identify location-dependency in process models. The authors design specifications for these patterns. The authors present illustrative examples and evaluate the identified patterns through a literature review of published process cases. Findings – This paper introduces location-awareness as a new perspective to extend context-awareness in BPM research, by introducing relevant location concepts such as location-awareness and location-dependencies. The authors identify five basic location-dependent control-flow patterns that can be captured in process models. And the authors identify location-dependencies in several existing case studies of business processes. Research limitations/implications – The authors focus exclusively on the control-flow perspective of process models. Further work needs to extend the research to address location-dependencies in process data or resources. Further empirical work is needed to explore determinants and consequences of the modeling of location-dependencies. Originality/value – As existing literature mostly focusses on the broad context of business process, location in process modeling still is treated as “second class citizen” in theory and in practice. This paper discusses the vital role of location-dependencies within business processes. The proposed five basic location-dependent control-flow patterns are novel and useful to explain location-dependency in business process models. They provide a conceptual basis for further exploration of location-awareness in the management of business processes.

Triumphs and tribulations in the psychotherapy of schizophrenia : reflections on a pilot study of metacognitive narrative psychotherapy

Schizophrenia results in a profound disruption of one’s capacity to make sense of mental states, coherently narrate self-experiences, and meaningfully relate to others. While current treatment options for people with schizophrenia tend to be symptom-focused, experience in designing and implementing a study focusing on enhancing sense of self demonstrates the feasibility of developing and implementing models of treatment that prioritize the subjective distress and self-experience of people with schizophrenia. There is emerging research evidence, based upon dialogical theory of self, that posits the potential of people with deficits of self to engage in meaningful therapeutic relationships and work toward greater integrity of self and degrees of recovery. The challenge is to translate these ideas into a research methodology that can be successfully applied within therapeutic contexts with people who meet the diagnostic criteria for schizophrenia. Based upon dialogical theory, we developed a principle-based manual for metacognitive narrative psychotherapy: a psychological approach to the treatment of people with schizophrenia, which aims to enhance metacognitive capacity and ability to narrate self-experiences. Five phases of treatment were identified: (1) developing a therapeutic relationship, (2) eliciting narratives, (3) enhancing metacognitive capacity, (4) enriching narratives, and (5) living enriched stories. Proscribed practices were also identified. We then implemented the manual within a university clinic context. Six therapists were trained to implement the model and, in turn, provided therapy to 11 patients who completed 12 to 24 months of treatment. Participants were assessed on metacognitive capacity, narrative coherence, narrative richness, self-reported recovery, and symptomatology at three points in time over the course of therapy. Contrary to expectations, participants were highly engaged in the therapeutic process, with minimal dropout. Overall, over 75% of participants evidenced improvement in their level of recovery over the course of therapy. The manualization and outcome findings demonstrate the feasibility of applying such interventions to a broader clinical population.

Creative occupations as knowledge practices : innovation and precarity in the creative economy

The ARC Centre of Excellence in Creative Industries and Innovation (herewith CCI) was established with two simple policy objectives. One was to assess anecdotal and boosterish claims about the growth rates of the creative industries, and hence, to measure the size of the creative industries contribution to gross domestic product (GDP). The other was to ascertain the contribution of the creative industries to employment. Preliminary research detailed in Cunningham and Higgs (2009) showed that the existing industrial classifications did not incorporate the terminology of the creative industries, nor did they disaggregate new categories of digital work such as video games. However, we discovered that occupational codes provide a much more fine-grained account of work that would enable us to disaggregate and track economic activity that corresponded to creative industries terminology. Thus was born one major centrepiece of CCI research – the tracking of national occupational codes in pursuit of measuring creative industries policy outcomes. This paper commences with some description of empirical work that investigates creative occupations; however, the real point is to suggest that this type of detailed, occupation-based empirical work has important theoretical potential that has not yet been fully expended (though see Cunningham 2013; Hearn and Bridgstock 2014; Bakhshi, Freeman and Higgs 2013; Hartley and Potts 2014).