Room ventilation and the risk of airborne infection transmission in three health care settings within a large teaching hospital

Background: Room ventilation is a key determinant of airborne disease transmission. Despite this, ventilation guidelines in hospitals are not founded on robust scientific evidence related to prevention of airborne transmission. Methods: We sought to assess the effect of ventilation rates on influenza, tuberculosis (TB) and rhinovirus infection risk within three distinct rooms in a major urban hospital; a Lung Function Laboratory, Emergency Department (ED) Negative-pressure Isolation Room and an Outpatient Consultation Room were investigated. Air exchange rate measurements were performed in each room using CO2 as a tracer. Gammaitoni and Nucci’s model was employed to estimate infection risk. Results: Current outdoor air exchange rates in the Lung Function Laboratory and ED Isolation Room limited infection risks to between 0.1 and 3.6%. Influenza risk for individuals entering an Outpatient Consultation Room after an infectious individual departed ranged from 3.6 to 20.7%, depending on the duration for which each person occupied the room. Conclusions: Given the absence of definitive ventilation guidelines for hospitals, air exchange measurements combined with modelling afford a useful means of assessing, on a case-by-case basis, the suitability of room ventilation at preventing airborne disease transmission.

A prospective cohort study of geriatric syndromes among older medical patients admitted to acute care hospitals

OBJECTIVES: To identify the prevalence of geriatric syndromes in the premorbid for all syndromes except falls (preadmission), admission, and discharge assessment periods and the incidence of new and significant worsening of existing syndromes at admission and discharge. DESIGN: Prospective cohort study. SETTING: Three acute care hospitals in Brisbane, Australia. PARTICIPANTS: Five hundred seventy-seven general medical patients aged 70 and older admitted to the hospital. MEASUREMENTS: Prevalence of syndromes in the premorbid (or preadmission for falls), admission, and discharge periods; incidence of new syndromes at admission and discharge; and significant worsening of existing syndromes at admission and discharge. RESULTS: The most frequently reported premorbid syndromes were bladder incontinence (44%), impairment in any activity of daily living (ADL) (42%). A high proportion (42%) experienced at least one fall in the 90 days before admission. Two-thirds of the participants experienced between one and five syndromes (cognitive impairment, dependence in any ADL item, bladder and bowel incontinence, pressure ulcer) before, at admission, and at discharge. A majority experienced one or two syndromes during the premorbid (49.4%), admission (57.0%), or discharge (49.0%) assessment period.The syndromes with a higher incidence of significant worsening at discharge (out of the proportion with the syndrome present premorbidly) were ADL limitation (33%), cognitive impairment (9%), and bladder incontinence (8%). Of the syndromes examined at discharge, a higher proportion of patients experienced the following new syndromes at discharge (absent premorbidly): ADL limitation (22%); and bladder incontinence (13%). CONCLUSION: Geriatric syndromes were highly prevalent. Many patients did not return to their premorbid function and acquired new syndromes.

Formation mechanisms of secondary organic aerosols in relation to laser printer emissions

Due to their large surface area, complex chemical composition and high alveolar deposition rate, ultrafine particles (UFPs) (< 0.1 ìm) pose a significant risk to human health and their toxicological effects have been acknowledged by the World Health Organisation. Since people spend most of their time indoors, there is a growing concern about the UFPs present in some indoor environments. Recent studies have shown that office machines, in particular laser printers, are a significant indoor source of UFPs. The majority of printer-generated UFPs are organic carbon and it is unlikely that these particles are emitted directly from the printer or its supplies (such as paper and toner powder). Thus, it was hypothesised that these UFPs are secondary organic aerosols (SOA). Considering the widespread use of printers and human exposure to these particles, understanding the processes involved in particle formation is of critical importance. However, few studies have investigated the nature (e.g. volatility, hygroscopicity, composition, size distribution and mixing state) and formation mechanisms of these particles. In order to address this gap in scientific knowledge, a comprehensive study including state-of-art instrumental methods was conducted to characterise the real-time emissions from modern commercial laser printers, including particles, volatile organic compounds (VOCs) and ozone (O3). The morphology, elemental composition, volatility and hygroscopicity of generated particles were also examined. The large set of experimental results was analysed and interpreted to provide insight into: (1) Emissions profiles of laser printers: The results showed that UFPs dominated the number concentrations of generated particles, with a quasi unimodal size distribution observed for all tests. These particles were volatile, non-hygroscopic and mixed both externally and internally. Particle microanalysis indicated that semi-volatile organic compounds occupied the dominant fraction of these particles, with only trace quantities of particles containing Ca and Fe. Furthermore, almost all laser printers tested in this study emitted measurable concentrations of VOCs and O3. A positive correlation between submicron particles and O3 concentrations, as well as a contrasting negative correlation between submicron particles and total VOC concentrations were observed during printing for all tests. These results proved that UFPs generated from laser printers are mainly SOAs. (2) Sources and precursors of generated particles: In order to identify the possible particle sources, particle formation potentials of both the printer components (e.g. fuser roller and lubricant oil) and supplies (e.g. paper and toner powder) were investigated using furnace tests. The VOCs emitted during the experiments were sampled and identified to provide information about particle precursors. The results suggested that all of the tested materials had the potential to generate particles upon heating. Nine unsaturated VOCs were identified from the emissions produced by paper and toner, which may contribute to the formation of UFPs through oxidation reactions with ozone. (3) Factors influencing the particle emission: The factors influencing particle emissions were also investigated by comparing two popular laser printers, one showing particle emissions three orders of magnitude higher than the other. The effects of toner coverage, printing history, type of paper and toner, and working temperature of the fuser roller on particle number emissions were examined. The results showed that the temperature of the fuser roller was a key factor driving the emission of particles. Based on the results for 30 different types of laser printers, a systematic positive correlation was observed between temperature and particle number emissions for printers that used the same heating technology and had a similar structure and fuser material. It was also found that temperature fluctuations were associated with intense bursts of particles and therefore, they may have impact on the particle emissions. Furthermore, the results indicated that the type of paper and toner powder contributed to particle emissions, while no apparent relationship was observed between toner coverage and levels of submicron particles. (4) Mechanisms of SOA formation, growth and ageing: The overall hypothesis that UFPs are formed by reactions with the VOCs and O3 emitted from laser printers was examined. The results proved this hypothesis and suggested that O3 may also play a role in particle ageing. In addition, knowledge about the mixing state of generated particles was utilised to explore the detailed processes of particle formation for different printing scenarios, including warm-up, normal printing, and printing without toner. The results indicated that polymerisation may have occurred on the surface of the generated particles to produce thermoplastic polymers, which may account for the expandable characteristics of some particles. Furthermore, toner and other particle residues on the idling belt from previous print jobs were a very clear contributing factor in the formation of laser printer-emitted particles. In summary, this study not only improves scientific understanding of the nature of printer-generated particles, but also provides significant insight into the formation and ageing mechanisms of SOAs in the indoor environment. The outcomes will also be beneficial to governments, industry and individuals.

The professional conversation : a new approach to professional learning in early childhood education and care

In 2009, Australia celebrated the introduction of a national Early Years Learning Framework. This is a critical component in a series of educational reforms designed to support quality pedagogy and practice in early childhood education and care (ECEC) and successful transition to school. As with any policy change, success in real terms relies upon building shared understanding and the capacity of educators to apply new knowledge and support change and improved practice within their service. With these outcomes in mind, a collaborative research project is investigating the efficacy of a new approach to professional learning in ECEC: The professional conversation. This paper provides an overview of the professional conversation approach, including underpinning principles and the design and use of reflective questions to support meaningful conversation and learning.

goDesign travelling design workshop program for regional secondary students

goDesign Travelling Workshop Program for Regional Secondary Students was an initiative of Queensland University of Technology (QUT) and the Design Institute of Australia (DIA) Queensland Branch, which aligned with the DIA unleashed: Queensland design on tour 2010 Exhibition. It was designed be delivered by university design academics in state secondary schools in Chinchilla, Mt Isa, Quilpie, Emerald, Gladstone and Bundaberg between February and September 2010, to approximately 95 secondary students and 24 teachers from the subject areas of visual art, graphics and industrial technology and design. A talk by a visiting design practitioner whose work was displayed in the exhibition, also features in the final day of the program in each town, and student work from the workshop was displayed in the exhibition alongside the professional design work. The three-day workshop is a design immersion program for regional Queensland Secondary Schools, which responds to specific actions outlined in the Queensland Government Design Strategy 2020 to ‘Build Design Knowledge and Learning’ and ‘Foster a Design Culture’. Underpinned by a place-based approach and the integration of Dr Charles Burnette’s IDESIGN teaching model, the program gives students and teachers the opportunity to explore, analyse and reimagine their local town through a series of scaffolded problem solving activities around the theme of ‘place’. The program allows students to gain hands-on experience designing graphics, products, interior spaces and architecture to assist their local community, with the support of design professionals. Students work individually and in groups on real design problems learning sketching, making, communication, presentation and collaboration skills to improve their design process, while considering social, cultural and environmental opportunities. The program was designed to facilitate an understanding of the value of design thinking and its importance to regional communities, to give students more information about various design disciplines as career options, and provide a professional development opportunity for teachers. Advisory assistance for the program was gained through Kelvin Grove State College, Queensland Studies Authority and QMI/Manufacturing Skills Queensland Manager, Manufacturing & Engineering Gateway Schools Project.

Safeguarding rural Australia : addressing masculinity and violence in rural settings : framework and scope for secondary data analysis in a rural Australia context

This report is an update of an earlier version produced in January 2010 (see Carrington et al. 2010) which remains as an ePrint through the project’s home page. The report provides an introduction to our analyses of extant secondary data with respect to violent acts and incidents relating to males living in rural settings in Australia using data which were available in public data bases at the time of production. It clarifies important aspects of our overall approach primarily by concentrating on three elements that required early scoping and resolution.

Safeguarding rural Australia : addressing masculinity and violence in rural settings : suicide and other violent self-harm in an Australian rural context : analysis of secondary data

This report is an update of an earlier one produced in September 2009 (see Carrington et al. 2009) which remains as an ePrint through the project’s home page. The report focuses on our examination of extant data which have been sourced with respect to self-harm and suicide among males living in regional and remote Australia and which were available in public data bases at production time. Moreover, specific areas of concern regarding elevated rates of suicide for rural males and data anomalies which emerged during our examination of these data are discussed.

Safeguarding rural Australia: addressing masculinity and violence in rural settings : intentional violent harm to others in an Australian rural context: analysis of secondary data analysis

This report is an update of an earlier one produced in January 2010 (see Carrington et al. 2010) which remains as an ePrint through the project’s home page. This report focuses on our examination of extant data which have been sourced with respect to intentional violence perpetrated or experienced by males living in regional and remote Australia . and which were available in public data bases at production. The nature of intentional violent acts can be physical, sexual or psychological or involve deprivation or neglect.

Safeguarding rural Australia: addressing masculinity and violence in rural settings : unintentional violent harm including injuries in an Australian rural context : analysis of secondary data analysis

This report is an update of an earlier one produced in January 2010 (see Carrington et al. 2010) which remains as an ePrint through the project’s home page. This report focuses on our examination of extant data which have been sourced with respect to unintentional serious and violent harm, including injuries, to males living in regional and remote Australia . and which were available in public data bases at production. Such harm typically might be caused by, for example, transport accidents, occupational exposures and hazards, burns and so on. Thus unintentional violent harm can cause physical trauma the consequences of which can lead to chronic conditions including psychological harm or substance abuse.

Safeguarding rural Australia : addressing masculinity and violence in rural settings : risky behaviour in a rural Australian context : analysis of secondary data analysis

This report is an update of an earlier one produced in January 2010 (see Carrington et al. 2010) which remains as an ePrint through the project’s home page. The report focus on our examination of extant data which have been sourced with respect to personally and socially risky behaviour associated with males living in regional and remote Australia and which were available in public data bases at production.

Safeguarding rural Australia : addressing masculinity and violence in rural settings : consequences of violent harm in a rural Australian context : analysis of secondary data analysis

This report is an update of an earlier one produced in January 2010 (see Carrington et al. 2010) which remains as an ePrint through the project’s home page. The report considers extant data which have been sourced with respect to some of the consequences of violent acts, incidents, harms and risky behaviour involving males living in regional and remote Australia and which were available in public data bases at production.