The solar capital: Canberra, clean tech, and climate change

There has been an increasing focus upon the role of cities and local government in respect of action upon climate change...

Can biophilic urbanism deliver strong economic and social benefits in cities? An economic and policy invetigations into the increased use of natural elements in urban design

Biophilic urbanism, or urban design that reflects humanity’s innate need for nature, stands to make significant contributions to a range of national, state and local government policies related to climate change mitigation and adaptation, by investigating ways in which nature can be integrated into, around and on top of buildings. Potential benefits of such design include reducing the heat island effect, reducing energy consumption for thermal control, enhancing urban biodiversity, improving well being and productivity, improving water cycle management, and assisting in the response to growing needs for densification and revitalisation of cities. This report will give an overview of the concept of biophilia and consider enablers and disablers to its application to urban planning and design. The paper will present findings from stakeholder engagement and a series of detailed case studies, related to a consideration of the economics of the use of biophilic elements (direct and indirect).

Resistance exercise with low glycogen increases p53 phosphorylation and PGC-1α mRNA in skeletal muscle

Purpose We determined the effect of reduced muscle glycogen availability on cellular pathways regulating mitochondrial biogenesis and substrate utilization after a bout of resistance exercise. Methods Eight young, recreationally trained men undertook a glycogen depletion protocol of one-leg cycling to fatigue (LOW), while the contralateral (control) leg rested (CONT). Following an overnight fast, subjects completed 8 sets of 5 unilateral leg press repetitions (REX) at 80 % 1 Repetition Maximum (1RM) on each leg. Subjects consumed 500 mL protein/CHO beverage (20 g whey + 40 g maltodextrin) upon completion of REX and 2 h later. Muscle biopsies were obtained at rest and 1 and 4 h after REX in both legs. Results Resting muscle glycogen was higher in the CONT than LOW leg (~384 ± 114 vs 184 ± 36 mmol kg−1 dry wt; P < 0.05), and 1 h and 4 h post-exercise (P < 0.05). Phosphorylation of p53Ser15 increased 1 h post-exercise in LOW (~115 %, P < 0.05) and was higher than CONT at this time point (~87 %, P < 0.05). p38MAPKThr180/Tyr182 phosphorylation increased 1 h post-exercise in both CONT and LOW (~800–900 %; P < 0.05) but remained above rest at 4 h only in CONT (~585 %, P < 0.05; different between legs P < 0.05). Peroxisome proliferator-activated receptor gamma coactivator-1α (PGC-1α) mRNA was elevated 4 h post-exercise in LOW (~200 %, P < 0.05; different between legs P < 0.05). There were no changes in Fibronectin type III domain-containing protein 5 (FNDC5) mRNA for CONT or LOW legs post-exercise. Conclusion Undertaking resistance exercise with low glycogen availability may enhance mitochondrial-related adaptations through p53 and PGC-1α-mediated signalling.

The reach and rationale for community health fairs

Latinos living in the USA account for one third of the uninsured population and face numerous cultural, linguistic, and financial barriers to accessing healthcare services. Community health fairs have developed to address the unmet need for no- and low-cost services that target prevention and education among underserved communities. The current research describes an ongoing effort in a community in Southern California and examines the barriers to health care among participants registering to receive free breast health screenings, one of the major services offered at a 2010 health fair. A total of 186 adult Latina women completed a brief questionnaire assessing their healthcare utilization and self-reported barriers to engaging in preventive and screening services. Approximately two thirds of the participants reported never receiving or having more than 2 years passing since receiving a preventive health check-up. Participants identified cost (64.5 %) and knowledge of locations for services (52.3 %) as the primary barriers to engaging in routine healthcare services. Engaging with health professionals represents a leading way in which adults obtain health information; health fairs offering cancer health screenings represent a culturally appropriate venue for increased cancer health equity. Implications of the current research for future health fairs and their role in community cancer education are discussed.

Design and fabrication of linear pixel arrays for organic photovoltaic modules to achieve scalable power output

We describe a design and fabrication method to enable simpler manufacturing of more efficient organic solar cell modules using a modified flat panel deposition technique. Many mini-cell pixels are individually connected to each other in parallel forming a macro-scale solar cell array. The pixel size of each array is optimized through experimentation to maximize the efficiency of the whole array. We demonstrate that integrated organic solar cell modules with a scalable current output can be fabricated in this fashion and can also be connected in series to generate a scalable voltage output.

Designs and architectures for the next generation of organic solar cells

Organic solar cells show great promise as an economically and environmentally friendly technology to utilize solar energy because of their simple fabrication processes and minimal material usage. However, new innovations and breakthroughs are needed for organic solar cell technology to become competitive in the future. This article reviews research efforts and accomplishments focusing on three issues: power conversion efficiency, device stability and processability for mass production, followed by an outlook for optimizing OSC performance through device engineering and new architecture designs to realize next generation organic solar cells.

Effects of metal ion concentration on electrodeposited CuZnSn film and its application in kesterite Cu2ZnSnS4solar cells

In this study, effects of concentrations of Cu(II), Zn(II) and Sn(II) ions in the electrolytic bath solution on the properties of electrochemically deposited CuZnSn (CZT) films were investigated. Study of the composition of a CZT film has shown that the metallic content (relative atomic ratio) in the film increased linearly with increase in the metal ion concentration. It is the first time that the relationship of the compositions of the alloy phases in the co-electrodeposited CZT film with the concentration of metal ions has been revealed. The results have confirmed that the formation and content of Cu6Sn5 and Cu5Zn8 alloy phases in the film were directly controlled by the concentration of Cu(II). SEM measurements have shown that Sn(II) has significant impact on film morphology, which became more porous as a result of the larger nucleation size of tin. The changes in the surface properties of the films was also confirmed by chronoamperometry characteristic (i–t) deposition curves. By optimization of metal ion concentrations in the electrolyte solution, a copper-poor and zinc-rich kesterite Cu2ZnSnS4 (CZTS) film was synthesized by the sulfurization of the deposited CZT film. The solar cell with the CZTS film showed an energy conversion efficiency of 2.15% under the illumination intensity of 100 mW cm 2.

Vertically stacked photovoltaic and thermal solar cell

According to some embodiments, the present invention provides a novel photovoltaic solar cell system from photovoltaic modules that are vertically arrayed in a stack format using thin film semiconductors selected from among org. and inorg. thin film semiconductors. The stack cells may be cells that are produced in a planar manner, then vertically oriented in an angular form, also termed herein tilted, to maximize the light capturing aspects. The use of a stack configuration system as described herein allows for the use of a variety of electrode materials, such as transparent materials or semitransparent metals. Light concn. can be achieved by using fresnel lens, parabolic mirrors or derivs. of such structures. The light capturing can be controlled by being reflected back and forth in the photovoltaic system until significant quantities of the resonant light is absorbed. Light that passes to the end and can be reflected back through the device by beveling or capping the end of the device with a different refractive index material, or alternatively using a reflective surface. The contacting between stacked cells can be done in series or parallel. According to some embodiments, the present invention uses a concentrator architecture where the light is channeled into the cells that contain thermal fluid channels (using a transparent fluid such as water) to absorb and hence reduce the thermal energy generation.

Assessing specific deterrence effects of increased speeding penalties using four measures of recidivism

Traffic law enforcement sanctions can impact on road user behaviour through general and specific deterrence mechanisms. The manner in which specific deterrence can influence recidivist behaviour can be conceptualised in different ways. While any reduction in speeding will have road safety benefits, the ways in which a ‘reduction’ is determined deserves greater methodological attention and has implications for countermeasure evaluation more generally. The primary aim of this research was to assess the specific deterrent impact of penalty increases for speeding offences in Queensland, Australia, in 2003 on two cohorts of drivers detected for speeding prior to and after the penalty changes were investigated. Since the literature is relatively silent on how to assess recidivism in the speeding context, the secondary research aim was to contribute to the literature regarding ways to conceptualise and measure specific deterrence in the speeding context. We propose a novel way of operationalising four measures which reflect different ways in which a specific deterrence effect could be conceptualised: (1) the proportion of offenders who re-offended in the follow up period; (2) the overall frequency of re-offending in the follow up period; (3) the length of delay to re-offence among those who re-offended; and (4) the average number of re-offences during the follow up period among those who re-offended. Consistent with expectations, results suggested an absolute deterrent effect of penalty changes, as evidenced by significant reductions in the proportion of drivers who re-offended and the overall frequency of re-offending, although effect sizes were small. Contrary to expectations, however, there was no evidence of a marginal specific deterrent effect among those who re-offended, with a significant reduction in the length of time to re-offence and no significant change in the average number of offences committed. Additional exploratory analyses investigating potential influences of the severity of the index offence, offence history, and method of detection revealed mixed results. Access to additional data from various sources suggested that the main findings were not influenced by changes in speed enforcement activity, public awareness of penalty changes, or driving exposure during the study period. Study limitations and recommendations for future research are discussed with a view to promoting more extensive evaluations of penalty changes and better understanding of how such changes may impact on motorists’ perceptions of enforcement and sanctions, as well as on recidivist behaviour.

Conjoint use of Dibenzosilole and Indan-1,3-dione Functionalities to Prepare an Efficient Non-Fullerene Acceptor for Solution-Processable Bulk-Heterojunction Solar Cells

A solution-processable, non-fullerene electron acceptor, 2,2′-(((5,5-dioctyl-5 H-dibenzo[b,d]silole-3,7-diyl)bis(thiophene-5,2-diyl))bis(methanylylidene))bis(1 H-indene-1,3(2 H)-dione) (called N5) comprised of dibenzosilole and 1,3-indanedione building blocks was designed, synthesized, and fully characterized. N5 is highly soluble in various organic solvents, has high thermal stability, and has energy levels matching those of archetypal donor poly(3-hexylthiophene). Solution-processable, bulk-heterojunction solar cells afforded promising power conversion efficiency of 2.76 % when N5 was used as a non-fullerene electron acceptor along with the conventional donor polymer poly(3-hexylthiophene). As per our knowledge, the material reported herein is the first example in the literature where synchronous use of such building blocks is demonstrated in the design an efficient, non-fullerene acceptor.

Crowning of dibenzosilole with a naphthalenediimide functional group to prepare an electron acceptor for organic solar cells

A novel, solution-processable non-fullerene electron acceptor 9,9′-(5,5-dioctyl-5H-dibenzo [b,d]silole-3,7-diyl)bis(2,7-dioctyl-4-(octylamino)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone) (B3) based on dibenzosilole and naphthalenediimide building blocks was designed, synthesized, characterized and successfully used in a bulk-heterojunction organic solar cell. B3 displayed excellent solubility, thermal stability and acquired electron energy levels matching with those of archetypal donor polymer poly(3-hexylthiophene). Solution-processable bulk-heterojunction devices afforded 1.16% power conversion efficiency with a high fill factor of 53%. B3 is the first example in the literature using this design principle, where mild donor units at the peripheries of end-capped naphthalenediimide units tune solubility and optical energy levels simultaneously.

Finnish HLA studies confirm the increased risk conferred by HLA-B27 homozygosity in ankylosing spondylitis

Objective: To determine the influence of HLA-B27 homozygosity and HLA-DRB1 alleles in the susceptibility to, and severity of, ankylosing spondylitis in a Finnish population. Methods: 673 individuals from 261 families with ankylosing spondylitis were genotyped for HLA-DRB1 alleles and HLA-B27 heterozygosity/ homozygosity. The frequencies of HLA-B27 homozygotes in probands from these families were compared with the expected number of HLA-B27 homozygotes in controls under Hardy-Weinberg equilibrium (HWE). The effect of HLA-DRB1 alleles was assessed using a logistic regression procedure conditioned on HLA-B27 and case-control analysis. Results: HLA-B27 was detected in 93% of cases of ankylosing spondylitis. An overrepresentation of HLA-B27 homozygotes was noted in ankylosing spondylitis (11%) compared with the expected number of HLA-B27 homozygotes under HWE (4%) (odds ratio (OR) = 3.3 (95% confidence interval, 1.6 to 6.8), p = 0.002). HLA-B27 homozygosity was marginally associated with reduced BASDAI (HLA-B27 homozygotes, 4.5 (1.6); HLA-B27 heterozygotes, 5.4 (1.8) (mean (SD)), p = 0.05). Acute anterior uveitis (AAU) was present in significantly more HLA-B27 positive cases (50%) than HLA-B27 negative cases (16%) (OR = 5.4 (1.7 to 17), p<0.004). HLA-B27 positive cases had a lower average age of symptom onset (26.7 (8.0) years) compared with HLA-B27 negative cases (35.7 (11.2) years) (p<0.0001). Conclusions: HLA-627 homozygosity is associated with a moderately increased risk of ankylosing spondylitis compared with HLA-β27 heterozygosity. HLA-B27 positive cases had an earlier age of onset of ankylosing spondylitis than HLA-B27 negative cases and were more likely to develop AAU. HLA-DRB1 alleles may influence the age of symptom onset of ankylosing spondylitis.

Cardiovascular disease is increased prior to onset of rheumatoid arthritis but not osteoarthritis: The population-based Nord-Trøndelag health study (HUNT)

Introduction: Patients with rheumatoid arthritis (RA) have increased risk of cardiovascular (CV) events. We sought to test the hypothesis that due to increased inflammation, CV disease and risk factors are associated with increased risk of future RA development. Methods: The population-based Nord-Trøndelag health surveys (HUNT) were conducted among the entire adult population of Nord-Trøndelag, Norway. All inhabitants 20 years or older were invited, and information was collected through comprehensive questionnaires, a clinical examination, and blood samples. In a cohort design, data from HUNT2 (1995-1997, baseline) and HUNT3 (2006-2008, follow-up) were obtained to study participants with RA (n = 786) or osteoarthritis (n = 3,586) at HUNT3 alone, in comparison with individuals without RA or osteoarthritis at both times (n = 33,567). Results: Female gender, age, smoking, body mass index, and history of previous CV disease were associated with self-reported incident RA (previous CV disease: odds ratio 1.52 (95% confidence interval 1.11-2.07). The findings regarding previous CV disease were confirmed in sensitivity analyses excluding participants with psoriasis (odds ratio (OR) 1.70 (1.23-2.36)) or restricting the analysis to cases with a hospital diagnosis of RA (OR 1.90 (1.10-3.27)) or carriers of the shared epitope (OR 1.76 (1.13-2.74)). History of previous CV disease was not associated with increased risk of osteoarthritis (OR 1.04 (0.86-1.27)). Conclusion: A history of previous CV disease was associated with increased risk of incident RA but not osteoarthritis.

Low temperature solar cooling system with absorption chiller and desiccant wheel

Nowadays Solar Cooling systems are becoming popular to reduce the carbon footprint of air conditioning. The use of an absorption chiller connected to solar thermal panels is increasing, but little study has been carried out to assess the advantage of join together an absorption chiller and a desiccant wheel to remove the sensible heat and the latent heat in different ways than the current design adopted in the industry. In this work I assess the possibility of implement a desiccant wheel in a conventional solar cooling system and the possibility of recovering the heat rejected by the absorption chiller which is then used for the regeneration of the desiccant wheel. The implementation of a desiccant wheel and the recovery of the heat rejected could provide a significant energy saving when compared to traditional solar cooling system. The results assist in the practical development of a solar cooling system which simultaneously uses absorption and adsorption technology.

The association between ambient temperature and children's lung function in Baotou, China

The objective of this study is to examine the association between ambient temperature and children’s lung function in Baotou, China. We recruited 315 children (8–12 years) from Baotou, China in the spring of 2004, 2005, and 2006. They performed three successive forced expiratory measurements three times daily (morning, noon, and evening) for about 5 weeks. The highest peak expiratory flow (PEF) was recorded for each session. Daily data on ambient temperature, relative humidity, and air pollution were monitored during the same period. Mixed models with a distributed lag structure were used to examine the effects of temperature on lung function while adjusting for individual characteristics and environmental factors. Low temperatures were significantly associated with decreases in PEF. The effects lasted for lag 0–2 days. For all participants, the cumulative effect estimates (lag 0–2 days) were −1.44 (−1.93, −0.94) L/min, −1.39 (−1.92, −0.86) L/min, −1.40 (−1.97, −0.82) L/min, and −1.28 (−1.69, −0.88) L/min for morning, noon, evening, and daily mean PEF, respectively, associated with 1 °C decrease in daily mean temperature. Generally, the effects of temperature were slightly stronger in boys than in girls for noon, evening, and daily mean PEF, while the effects were stronger in girls for morning PEF. PM2.5 had joint effects with temperature on children’s PEF. Higher PM2.5 increased the impacts of low temperature. Low ambient temperatures are associated with lower lung function in children in Baotou, China. Preventive health policies will be required for protecting children from the cold weather.