Production of liquid fuel and activated carbon from mahogany seed by using pyrolysis technology

The renovation of biomass waste in the form of Mahogany seed waste into bio-fuel as well as activated carbon by fixed bed pyrolysis reactor has been taken into consideration in this study. The mahogany seed in particle form is pyrolyzed in an enormously heated fixed bed reactor with nitrogen as the carrier gas. The reactor is heated from 4000C to 6000C using a external heater in which rice husk and charcoal are used as the heater biomass fuel. Reactor bed temperature, running time and feed particle size have been varied to get the optimum operating conditions of the system. The parameters are found to influence the product yields to a large extent. A maximum liquid and char yield are 49 wt. % and 35 wt. % respectively obtained at a reactor bed temperature 5000C when the running time is 90 minutes. Acquired pyrolyzed oil at these optimal process conditions were analyzed for some of their properties as an alternative fuel. The oil possesses comparable flame temperature, favorable flash point and reasonable viscosity along with somewhat higher density. The kinematic viscosity of the derived fuel is 3.8 cSt and density is 1525 kg/m3. The higher calorific value is found 32.4 MJ/kg which is significantly higher than other biomass derived fuel. Moderate adsorption capacity of the prepared activated carbon in case of methyl blue & tea water was also revealed.

Facilitating first year students’ engagement with planning education : utilising student affinity for technology to increase cohort cohesion and decrease attrition

First year students overwhelmingly indicate that a strong interest in a field of study prompts them to enrol in university (McInnis et al 2000), yet over a quarter indicate that they have seriously considered dropping out of studies during their first year, with boredom most frequently cited by those domestic students who do depart before graduation (Coates and Ransom 2011). While it may be comforting to write off such withdrawals to the presumed apathy of youth, student “disquiet (in) their first year on campus may be a result of courses and institutions that do not match their needs and objectives, rather than any uncertainty or lack of purpose on their part” (James et al 1999). Voting with their mouse clicks, The current research investigate two conceptualized types of student participation in online discussion forums to increase understanding of student affinity for technology and its potential for fostering social network development amongst first year students.

Educational technology in medical imaging education

Purpose The emergence of digital technologies has created enthusiasm for their application to student learning. An evolving issue in medical imaging is how these technologies might be implemented within programs. Method A review of the literature was performed to explore applications and issues of educational technology in medical imaging Results There are a range of applications for educational technology within medical imaging education however limitations do exist. Learners must be supported by the development of skills to utilize education technologies. The digital picture archival and communication environment presents an ideal opportunity to enhance student learning through interaction and engagement with images. Implementation of education technologies to support student placement activities is an area for future development provided equity of access is addressed. Conclusion Education technologies have specific application to medical imaging education as part of a blended curriculum.

On governing collaborative Information Technology (IT) : a relational perspective

Organizations today invest in collaborative IT to engage in collaborative alliances to sustain or improve their competitive positions. Effective use of this collaborative IT in an alliance requires a deeper understanding of their governance structures. This effort is to ensure the sustainability of these alliances. Through the relational view of the firm, we suggest relational lateral IT-steering committees, relational IT operational committees, and relational IT performance management systems as IT governance structures for collaborative alliances. We then incorporate these structures, develop a model for approaches to governing collaborative IT, and evaluate the effectiveness for such governance structures in the IT-dependent alliances. We suggest that IT governance efforts of an alliance should contribute to their collaborative rent. We also suggest that the collaborative rent of an alliance would relate to the business value of its alliance partners. Field survey data containing 192 responses indicates a positive influence of the suggested IT governance efforts of the alliance on the collaborative rent of the alliance. The results also suggest a positive impact of the collaborative rent of the alliance on the business value of the alliance partners.

Pervasive technology and public transport : opportunities beyond telematics

The advancements of technology in the field of public transport have been considerable. Information Technology (IT) has made the dissemination of information effortless, contributing to reduced perceived waiting time, increased sense of security, and value for money. Nevertheless, and in light of the ever more obvious widespread presence of powerful mobile devices, it seems that the use of technology may be geared towards supplementary services other than telematics. Looking at it from a passenger’s perspective, this article provides an overview of what IT-based services are currently offered in public transport and what is their assessed impact. We finalise by putting forward possible directions that future services might follow, and stress out the necessity to come up with frameworks that enable for the impact assessment on service quality and customer satisfaction.

Culture, technology and the city

The 21st century has been described as the “century of cities”. By 2030, 70 per cent of the world’s population will live in cities, with the most rapid urbanization occurring in the developing world. This paper will draw up geographer Ed Soja’s concept of the “spatial turn” in social theory to consider how the culture of cities can act as a catalyst to innovation and the development of new technologies. In doing so, the paper will develop a three-layered approach to culture as: the arts; the way of life of people and communities; and the embedded structure underpinning socio-economic relations. It will also consider technology at a three-layered element, including devices, practices and ‘logics’ of technology, or what the Greeks termed techne. The paper will consider recent approaches to urban cultural policy, including cluster development and creative cities, and suggest some alternatives, noting that a problem with current approaches is that they focus excessively upon production (clusters) or consumption (creative cities). It will also consider the development of digital creative industries such as games, and the strategies of different cities to develop an innovation culture.

Fashion meets journalism : mapping and evaluating Australian fashion media

This study demonstrates how to study fashion journalism from the point of view, that it is its own field of journalism, akin to other journalism beats such as politics, sports and health. There is scope here for comment on the co-evolution of fashion and journalism, leading to ‘fashion journalism’ developing as a distinct field of study in its own right. This research contributes more generally to the field of media and cultural studies, by developing the threepart producer/text/reader model, which is the standard ‘media studies’ analytical framework. The study of fashion media from a cultural studies perspective acknowledges that cultural studies has pioneered the formal study of both journalism and fashion, for instance in studies of women’s magazines; but it has not brought the two areas together sufficiently. What little work has been done, however, has allowed theorists to explore how magazines promote feminism and form culture, which acts as a step in concreting fashion’s importance theoretically. This thesis has contributed to cultural studies by showing the relationship between the corporate industry, of both fashion and media (producer), and the active audience (reader) can be rethought and brought up to date for the more interactive era of the 21st century.

Exploiting SNOMED CT concepts and relationships for clinical information retrieval : Australian e-Health Research Centre and Queensland University of Technology at the TREC 2012 Medical Track

The Australian e-Health Research Centre and Queensland University of Technology recently participated in the TREC 2012 Medical Records Track. This paper reports on our methods, results and experience using an approach that exploits the concept and inter-concept relationships defined in the SNOMED CT medical ontology. Our concept-based approach is intended to overcome specific challenges in searching medical records, namely vocabulary mismatch and granularity mismatch. Queries and documents are transformed from their term-based originals into medical concepts as defined by the SNOMED CT ontology, this is done to tackle vocabulary mismatch. In addition, we make use of the SNOMED CT parent-child `is-a' relationships between concepts to weight documents that contained concept subsumed by the query concepts; this is done to tackle the problem of granularity mismatch. Finally, we experiment with other SNOMED CT relationships besides the is-a relationship to weight concepts related to query concepts. Results show our concept-based approach performed significantly above the median in all four performance metrics. Further improvements are achieved by the incorporation of weighting subsumed concepts, overall leading to improvement above the median of 28% infAP, 10% infNDCG, 12% R-prec and 7% Prec@10. The incorporation of other relations besides is-a demonstrated mixed results, more research is required to determined which SNOMED CT relationships are best employed when weighting related concepts.

Radiotherapy Monte Carlo simulation using cloud computing technology

Cloud computing allows for vast computational resources to be leveraged quickly and easily in bursts as and when required. Here we describe a technique that allows for Monte Carlo radiotherapy dose calculations to be performed using GEANT4 and executed in the cloud, with relative simulation cost and completion time evaluated as a function of machine count. As expected, simulation completion time decreases as 1=n for n parallel machines, and relative simulation cost is found to be optimal where n is a factor of the total simulation time in hours. Using the technique, we demonstrate the potential usefulness of cloud computing as a solution for rapid Monte Carlo simulation for radiotherapy dose calculation without the need for dedicated local computer hardware as a proof of principal. Funding source Cancer Australia (Department of Health and Ageing) Research Grant 614217

Development of an innovative technology-based youth passenger safety program : an evidence-based approach

Young drivers are overrepresented in motor vehicle crash rates, and their risk increases when carrying similar aged passengers. Graduated Driver Licensing strategies have demonstrated effectiveness in reducing fatalities among young drivers, however complementary approaches may further reduce crash rates. Previous studies conducted by the researchers have shown that there is considerable potential for a passenger focus in youth road safety interventions, particularly involving the encouragement of young passengers to intervene in their peers’ risky driving (Buckley, Chapman, Sheehan & Davidson, 2012). Additionally, this research has shown that technology-based applications may be a promising means of delivering passenger safety messages, particularly as young people are increasingly accessing web-based and mobile technologies. This research describes the participatory design process undertaken to develop a web-based road safety program, and involves feasibility testing of storyboards for a youth passenger safety application. Storyboards and framework web-based materials were initially developed for a passenger safety program, using the results of previous studies involving online and school-based surveys with young people. Focus groups were then conducted with 8 school staff and 30 senior school students at one public high school in the Australian Capital Territory. Young people were asked about the situations in which passengers may feel unsafe and potential strategies for intervening in their peers’ risky driving. Students were also shown the storyboards and framework web-based material and were asked to comment on design and content issues. Teachers were also shown the material and asked about their perceptions of program design and feasibility. The focus group data will be used as part of the participatory design process, in further developing the passenger safety program. This research describes an evidence-based approach to the development of a web-based application for youth passenger safety. The findings of this research and resulting technology will have important implications for the road safety education of senior high school students.

Economic growth and inequality patterns in the presence of costly technology adoption and uncertainty

We develop a stochastic endogenous growth model to explain the diversity in growth and inequality patterns and the non-convergence of incomes in transitional economies where an underdeveloped financial sector imposes an implicit, fixed cost on the diversification of idiosyncratic risk. In the model endogenous growth occurs through physical and human capital deepening, with the latter being the more dominant element. We interpret the fixed cost as a ‘learning by doing’ cost for entrepreneurs who undertake risk in the absence of well developed financial markets and institutions that help diversify such risk. As such, this cost may be interpreted as the implicit returns foregone due to the lack of diversification opportunities that would otherwise have been available, had such institutions been present. The analytical and numerical results of the model suggest three growth outcomes depending on the productivity differences between the projects and the fixed cost associated with the more productive project. We label these outcomes as poverty trap, dual economy and balanced growth. Further analysis of these three outcomes highlights the existence of a diversity within diversity. Specifically, within the ‘poverty trap’ and ‘dual economy’ scenarios growth and inequality patterns differ, depending on the initial conditions. This additional diversity allows the model to capture a richer range of outcomes that are consistent with the empirical experience of several transitional economies.

Constructing Technology Projects with Young Children : Four Detailed Case Studies of Mounting Constructivist Learning Projects Using Dimple Technologies for Young Children

The work by graduate teachers in this volume represent intentional design of learning experiences using technology for Early Childhood settings. They were given a two-part design task: a sequence of lessons organised around a themed project; and the collection of resources to support such activities. The project had to be constructive in nature where the children built objects and representations that were meaningful to them. The excellent works presented here offer a range of approaches that would be suitable in a variety of contexts. Because they are reasoned, these projects offer flexibility in implementation along with confidence that they would be effective.

Digital dietetics : practices and attitudes to technology use among Australian dietitians

Recent advancements in the capabilities of information and communication technologies (ICT) offer unique avenues to support the delivery of nutrition care. Despite ICTs being widely available, evidence on the practices and attitudes with regard to ICT use among dietitians is limited. A cross-sectional survey of Dietitians Association of Australia members was administered online in August 2011. All dietitians who responded (n=87) had access to a computer at work. Half reported providing non face-to-face consultations, with the telephone and email the most common modes of delivery. The use of smart phones was prevalent for 49% of practitioners, with 30% recommending nutrition-related applications and/or programs to clients. Benefits to technology use in practice most commonly reported included improvements in access to information/resources, time management, and workflow efficiency. Barriers identified related to cost and access to technology, and lack of suitable programs/applications. Technology was viewed as an important tool in practice among 93% of dietitians surveyed, however only 38% were satisfied with their current level of use. The majority (81%) believed more technology should be integrated within dietetics, while 85% indicated that the development of suitable and practical applications andprograms is necessary for future practice. Technology is regarded as an important tool by Australian dietitians, with an expressed need for theirinclusion to further facilitate nutrition care. Regular and ongoing evaluation of technology use among dietitians is vital to ensure thatapplications and use are evidence based and relevant to consumers in the digital world.