Mutation analysis of the CDKN2A promoter in Australian melanoma families

Approximately 50% of all melanoma families worldwide show linkage to 9p21-22, but only about half of these have been shown to contain germ line CDKN2A mutations. It has been hypothesized that a proportion of these families carry mutations in the noncoding regions of CDKN2A. Several Canadian families have been reported to carry a mutation in the 5' UTR, at position -34 relative to the start site, which gives rise to a novel AUG translation initiation codon that markedly decreases translation from the wild-type AUG (Liu et al., 1999). Haplotype sharing in these Canadian families suggested that this mutation is of British origin. We sequenced 1,327 base pairs (bp) of CDKN2A, making up 1,116 bp of the 5' UTR and promoter, all of exon 1, and 61 bp of intron 1, in at least one melanoma case from 110 Australian families with three or more affected members known not to carry mutations within the p16 coding region. In addition, 431 bp upstream of the start codon was sequenced in an additional 253 affected probands from two-case melanoma families for which the CDKN2A mutation status was unknown. Several known polymorphisms at positions -33, -191, -493, and -735 were detected, in addition to four novel variants at positions 120, -252, -347, and -981 relative to the start codon. One of the probands from a two-case family was found to have the previously reported Q50R mutation. No family member was found to carry the mutation at position -34 or any other disease-associated mutation. For further investigation of noncoding CDKN2A mutations that may affect transcription, allele-specific expression analysis was carried out in 31 of the families with at least three affected members who showed either complete or "indeterminate" 9p haplotype sharing without CDKN2A exonic mutations. Reverse transcription polymerase chain reaction and automated sequencing showed expression of both CDKN2A alleles in all family members tested. The lack of CDKN2A promoter mutations and the absence of transcriptional silencing in the germ line of this cohort of families suggest that mutations in the promoter and 5' UTR play a very limited role in melanoma predisposition.

Designing university, government and industry community engagement to build informed and effective interventions in the area of road safety

Individuals, community organisations and industry have always been involved to varying degrees in efforts to address the Queensland road toll. Traditionally, road crash prevention efforts have been led by state and local government organisations. While community and industry groups have sometimes become involved (e.g. Driver Reviver campaign), their efforts have largely been uncoordinated and under-resourced. A common strength of these initiatives lies in the energy, enthusiasm and persistence of community-based efforts. Conversely, a weakness has sometimes been the lack of knowledge, awareness or prioritisation of evidence-based interventions or their capacity to build on collaborative efforts. In 2000, the Queensland University of Technology’s Centre for Accident Research and Road Safety – Queensland (CARRS-Q) identified this issue as an opportunity to bridge practice and research and began acknowledging a selection of these initiatives, in partnership with the RACQ, through the Queensland Road Safety Awards program. After nine years it became apparent there was need to strengthen this connection, with the Centre establishing a Community Engagement Workshop in 2009 as part of the overall Awards program. With an aim of providing community participants opportunities to see, hear and discuss the experiences of others, this event was further developed in 2010, and with the collaboration of the Queensland Department of Transport and Main Roads, the RACQ, Queensland Police Service and Leighton Contractors Pty Ltd, a stand-alone Queensland Road Safety Awards Community Engagement Workshop was held in 2010. Each collaborating organisation recognised a need to mobilise the community through effective information and knowledge sharing, and recognised that learning and discussion can influence lasting behaviour change and action in this often emotive, yet not always evidence-based, area. This free event featured a number of speakers representing successful projects from around Australia and overseas. Attendees were encouraged to interact with the speakers, to ask questions, and most importantly, build connections with other attendees to build a ‘community road safety army’ all working throughout Australia on projects underpinned by evaluated research. The workshop facilitated the integration of research, policy and grass-roots action enhancing the success of community road safety initiatives. For collaboration partners, the event enabled them to transfer their knowledge in an engaged approach, working within a more personal communication process. An analysis of the success factors for this event identified openness to community groups and individuals, relevance of content to local initiatives, generous support with the provision of online materials and ongoing communication with key staff members as critical and supports the view that the university can directly provide both the leadership and the research needed for effective and credible community-based initiatives to address injury and death on the roads.

An exploration of shared services types in higher education

The emerging global Higher Education (HE) market challenges all universities to reconsider their mission, in order to function effectively and efficiently, and to be responsive to changing marketplace demands. Universities are considering cooperating or sharing in a wide range of areas, in order to achieve sought after cost savings and improvements in performance.Studies suggest that a wide range of services could potentially be shared across Higher Education Institutions (HEIs),offering several potential benefits. While there are many individual documented examples of how shared services have been applied in the Higher Education sector, there has been little synthesis, conceptualization or discussion (in general or in the HE sector) around the different types of possible shared services options and how they are structured. A deeper understanding of potential types of sharing arrangements will be of value to those universities considering shared services, implementing shared services, and managing shared services. Through analysis of 36 documented case studies of shared services in HE, this study sought to synthesize a typology of sharing arrangements. An inductive approach was used to identify the core differentiating dimensions. The findings present eight types of sharing arrangements that occur in the HE sector, with descriptions and examples from the case studies observed.

Aligning the drivers in the value chain - a new cane payment system for Mackay Sugar

For the 2005 season, Mackay Sugar and its growers agreed to implement a new cane payment system. The aim of the new system was to better align the business drivers between the mill and its growers and as a result improve business decision making. The technical basis of the new cane payment system included a fixed sharing of the revenue from sugar cane between the mill and growers. Further, the new system replaced the CCS formula with a new estimate of recoverable sugar (PRS) and introduced NIR for payment analyses. Significant mill and grower consultation processes led to the agreement to implement the new system in 2005 and this consultative approach has been reflected in two seasons of successful operation.

Implementing design build project delivery system in Indonesian road infrastructure projects

Design-Build (DB) project delivery systems have increasingly been adopted by many private and public sector organizations worldwide due to its many advantages. However, many Indonesian road infrastructure projects are still delivered using the traditional design-bid-build (DBB) project delivery system. This paper reviews the existing literature to explore factors that can influence the successful implementation of DB project delivery system in Indonesian road infrastructure projects. It founds the lack of clarification in existing legislations as well as the lack of experiences, knowledge and skill as the main obstacles in implementing DB systems in Indonesia. To overcome these obstacles, this paper proposes (1) A relook at existing legislation in term of providing more guidance on determining projects appropriate for the DB, procedures for implementing DB, and the structure of builder entity; (2) To develop the skills and knowledge of DB to all stakeholders through communications, knowledge sharing and training. The outcome of this review can serve as a guide to development a framework for the implementation of the design-build project delivery system in Indonesian road infrastructure projects.

“Prosuming” across cultures : youth creating digital media across borders

The Scratch Online Community is a space that enables young people to share their creative digital projects internationally with a level of ease that was impossible only a few years ago. Like all creative communities, Scratch is not just a space for sharing products, work, techniques and tips and tricks, but also a space for social interaction. Media literacy educators have unprecedented challenges and opportunities in digital environments like Scratch to harness the vast amount of knowledge in the community to enhance students’ learning. They also have challenges and opportunities in terms of implementing a form of digital media literacy education that is responsive to social and cultural representation. One role of digital media literacy is to help young people to challenge unfair and derogatory portrayals of people and to break down processes of social and cultural ‘othering’ so that all community members feel included and safe to express themselves. This article considers how online community spaces might draw on social interaction to enhance cross-cultural understandings and learning through dialogue and creative practice. The article uses statistics to indicate the amount of international interaction in the Scratch community. It then uses qualitative analysis of forum discussions and creative digital work to analyse the types of cross cultural interaction that occurs.

Development of a performance model for international construction joint venture : a system dynamics approach

The uncertain and dynamic nature of International Construction Joint Venture (ICJV) performance is evolved with many critical factors which lead to make partner relationships more complex in respect of making decisions to maintain a cohesive environment. Addressing to the fact, a generic system dynamics performance model for ICJV is developed by integrating a number variables as to get an overall impact on performance of ICJV and to make effective decisions based on that. In order to formulate and validate the model both structurally and behaviourally, both qualitative and quantitative data are gathered by conducting intensive interviews from two ICJVs in Thailand. After conducting intensive simulations of model, three major problems are identified related to negative value gap, low productivity in construction and high rate of ineffective information sharing of both ICJVs. Several policies are suggested and integrated application of these policies provides a maximum improvement to performance of the ICJV.

The impact of taxes on optimal portfolio choice : an Australian study

Taxes are an important component of investing that is commonly overlooked in both the literature and in practice. For example, many understand that taxes will reduce an investment’s return, but less understood is the risk-sharing nature of taxes that also reduces the investment’s risk. This thesis examines how taxes affect the optimal asset allocation and asset location decision in an Australian environment. It advances the model of Horan & Al Zaman (2008), improving the method by which the present value of tax liabilities are calculated, by using an after-tax risk-free discount rate, and incorporating any new or reduced tax liabilities generated into its expected risk and return estimates. The asset allocation problem is examined for a range of different scenarios using Australian parameters, including different risk aversion levels, personal marginal tax rates, investment horizons, borrowing premiums, high or low inflation environments, and different starting cost bases. The findings support the Horan & Al Zaman (2008) conclusion that equities should be held in the taxable account. In fact, these findings are strengthened with most of the efficient frontier maximising equity holdings in the taxable account instead of only half. Furthermore, these findings transfer to the Australian case, where it is found that taxed Australian investors should always invest into equities first through the taxable account before investing in super. However, untaxed Australian investors should invest their equity first through superannuation. With borrowings allowed in the taxable account (no borrowing premium), Australian taxed investors should hold 100% of the superannuation account in the risk-free asset, while undertaking leverage in the taxable account to achieve the desired risk-return. Introducing a borrowing premium decreases the likelihood of holding 100% of super in the risk-free asset for taxable investors. The findings also suggest that the higher the marginal tax rate, the higher the borrowing premium in order to overcome this effect. Finally, as the investor’s marginal tax rate increases, the overall allocation to equities should increase due to the increased risk and return sharing caused by taxation, and in order to achieve the same risk/return level as the lower taxation level, the investor must take on more equity exposure. The investment horizon has a minimal impact on the optimal allocation decision in the absence of factors such as mean reversion and human capital.

An integrated knowledge management framework for managing sustainability knowledge in the Australian infrastructure sector

In Australia, it has been increasingly accepted that sustainability needs to be at the top of the agenda when contemplating infrastructure development. In practice however, many companies struggle to find effective ways to embrace sustainable ideas and implement them in real projects beyond minimum compliance. One of the reasons is the lack of underpinning knowledge and evidence to demonstrate and measure the linkage between sustainability implementations and the relevant outcomes. This is compounded by the fact that very often there are no common understandings between the stakeholders on sustainability and there is a big divide between research advancement and real-life applications. Therefore it is both feasible and timely to develop and expand the body of sustainability knowledge on infrastructure development and investigate better ways of communicating with and managing it within the infrastructure sector. Although knowledge management (KM) is a relatively new and emerging discipline, it has shown its value and promise in existing applications in the construction industry. Considering the existing KM mechanisms and tools employed in practice, this research is aimed at establishing a specific KM approach to facilitate sustainability knowledge identification, acquisition, sharing, maintenance and application within the infrastructure sector, and promote integrated decision-making for sustainable infrastructure development. A triangulation of questionnaire survey, semi-structured interviews and case studies was employed in this research to collect required qualitative and quantitative data. The research studied the unique characteristics of the infrastructure sector, the nature of sustainability knowledge, and evaluated and validated the critical elements, key processes, and priority issues of KM for the Australian infrastructure sector. A holistic KM framework was developed to set the overall context for managing sustainability knowledge in the infrastructure sector by outlining (1) the main aims and outcomes of managing sustainability knowledge, (2) the key knowledge activities, (3) effective KM strategies and instruments, and (4) KM enablers. Because of the highly project-oriented nature of the infrastructure sector, knowledge can only add value when it is being used in real projects. Implementation guidelines were developed to help the industry practitioners and project teams to apply sustainability knowledge and implement KM in infrastructure project scenarios. This research provides the Australian infrastructure sector with tools to better understand KM, helps the industry practitioners to prioritize attention on relevant sustainability issues, and recommends effective practices to manage sustainability knowledge, especially in real life implementation of infrastructure projects.

Using mobile phones to improve offline access to online information : distributed content delivery

Mobile phones are now powerful and pervasive making them ideal information browsers. The Internet has revolutionized our lives and is a major knowledge sharing media. However, many mobile phone users cannot access the Internet (for financial or technical reasons) and so the mobile Internet has not been fully realized. We propose a novel content delivery network based on both a factual and speculative analysis of today’s technology and analyze its feasibility. If adopted people living in remote regions without Internet will be able to access essential (static) information with periodic updates.

Reactive image-based collision avoidance system for unmanned aircraft systems

Approximately 20 years have passed now since the NTSB issued its original recommendation to expedite development, certification and production of low-cost proximity warning and conflict detection systems for general aviation [1]. While some systems are in place (TCAS [2]), ¡¨see-and-avoid¡¨ remains the primary means of separation between light aircrafts sharing the national airspace. The requirement for a collision avoidance or sense-and-avoid capability onboard unmanned aircraft has been identified by leading government, industry and regulatory bodies as one of the most significant challenges facing the routine operation of unmanned aerial systems (UAS) in the national airspace system (NAS) [3, 4]. In this thesis, we propose and develop a novel image-based collision avoidance system to detect and avoid an upcoming conflict scenario (with an intruder) without first estimating or filtering range. The proposed collision avoidance system (CAS) uses relative bearing ƒÛ and angular-area subtended ƒê , estimated from an image, to form a test statistic AS C . This test statistic is used in a thresholding technique to decide if a conflict scenario is imminent. If deemed necessary, the system will command the aircraft to perform a manoeuvre based on ƒÛ and constrained by the CAS sensor field-of-view. Through the use of a simulation environment where the UAS is mathematically modelled and a flight controller developed, we show that using Monte Carlo simulations a probability of a Mid Air Collision (MAC) MAC RR or a Near Mid Air Collision (NMAC) RiskRatio can be estimated. We also show the performance gain this system has over a simplified version (bearings-only ƒÛ ). This performance gain is demonstrated in the form of a standard operating characteristic curve. Finally, it is shown that the proposed CAS performs at a level comparable to current manned aviations equivalent level of safety (ELOS) expectations for Class E airspace. In some cases, the CAS may be oversensitive in manoeuvring the owncraft when not necessary, but this constitutes a more conservative and therefore safer, flying procedures in most instances.

The analysis of social capital in online social communities

Social networks have proven to be an attractive avenue of investigation for researchers since humans are social creatures. Numerous literature have explored the term “social networks” from different perspectives and in diverse research fields. With the popularity of the Internet, social networking has taken on a new dimension. Online social communities therefore have become an emerging social avenue for people to communicate in today’s information age. People use online social communities to share their interests, maintain friendships, and extend their so-called circle of “friends”. Likewise, social capital, also known as human capital, is an important theory in sociology. Researchers usually utilise social capital theory when they investigate the topic relating to social networks. However, there is little literature that can provide an explicit and strong assertion in that research area due to the complexity of social capital. This thesis therefore focuses on the issue related to providing a better understanding about the relationship between social capital and online social communities. To enhance the value within the scope of this analysis, an online survey was conducted to examine the effects of the dimensions of social capital: relational capital, structural capital, and cognitive capital, determining the intensity of using online social communities. The data were derived from a total of 350 self-selected respondents completing an online survey during the research period. The main results indicate that social capital exists in online social communities under normal circumstances. Finally, this thesis also presents three contributions for both theory and practice in Chapter 5. The main results contribute to the understanding of connectivity in the interrelationships between individual social capital exchange within online social networks. Secondly, social trust was found to have a weak effect in influencing the intensity of individuals using online social communities. Third, the perpetual role of information sharing has an indirect influence on individual users participating in online social communities. This study also benefits online marketing consultants as marketers can not only gain consumer information easier from online social communities but also this understanding assists in designing effective communication within online social communities. The cross-sectional study, the reliability of Internet survey data, and sampling issues are the major three limitations in this research. The thesis provides a new research model and recommends that the mediating effects, privacy paradox, and social trust on online social communities should be further explored in future research.

Distributed DSTATCOMs for distribution line enhancement

Distribution feeder voltage reinforcement by multiple site reactive power compensation systems has recently been reported by many researchers. However, voltage control by multiple DSTATCOMs across a distribution feeder may introduce control interactions and/or voltage instability. This paper addresses these control interaction issues and proposes a control scheme that alleviates interactions among controllers. The proposed control scheme also enhances proper sharing of reactive power among DSTATCOMs. A mathematical model of a distribution system with any number of DSTATCOMs is developed to investigate the performance of the control system. This mathematical model is used to conduct eigenvalue analysis to develop the criterion for controller design. The proposed control scheme is tested in time domain on a sample radial distribution feeder installed with multiple DSTATCOMs and test results are presented.

Closing the loop of design and analysis : Parametric modelling tools for early decision support

There is a growing need for parametric design software that communicates building performance feedback in early architectural exploration to support decision-making. This paper examines how the circuit of design and analysis process can be closed to provide active and concurrent feedback between architecture and services engineering domains. It presents the structure for an openly customisable design system that couples parametric modelling and energy analysis software to allow designers to assess the performance of early design iterations quickly. Finally, it discusses how user interactions with the system foster information exchanges that facilitate the sharing of design intelligence across disciplines.

Data modeling in elementary and middle school classes : a shared experience

This paper argues for a renewed focus on statistical reasoning in the elementary school years, with opportunities for children to engage in data modeling. Data modeling involves investigations of meaningful phenomena, deciding what is worthy of attention, and then progressing to organizing, structuring, visualizing, and representing data. Reported here are some findings from a two-part activity (Baxter Brown’s Picnic and Planning a Picnic) implemented at the end of the second year of a current three-year longitudinal study (grade levels 1-3). Planning a Picnic was also implemented in a grade 7 class to provide an opportunity for the different age groups to share their products. Addressed here are the grade 2 children’s predictions for missing data in Baxter Brown’s Picnic, the questions posed and representations created by both grade levels in Planning a Picnic, and the metarepresentational competence displayed in the grade levels’ sharing of their products for Planning a Picnic.