Development of multi-rotor localised surveillance using multi-spectral sensors for plant biosecurity

This report describes a proof of concept for multi-rotor localised surveillance using a multi-spectral sensor for plant biosecurity applications. A literature review was conducted on previous applications using airborne multispectral imaging for plant biosecurity purposes. A ready built platform was purchased and modified in order to fit and provide suitable clearance for a Tetracam Mini-MCA multispectral camera. The appropriate risk management documents were developed allowing the platform and the multi-spectral camera to be tested extensively. However, due to technical difficulties with the platform the Mini- MCA was not mounted to the platform. Once a suitable platform is developed, future extensions can be conducted into the suitability of the Mini-MCA for airborne surveillance of Australian crops.

Active Adaptive Gyrostabiliser Control System

A gyrostabiliser control system and method for stabilising marine vessel motion based on precession information only. The control system employs an Automatic Gain Control (AGC) precession controller (60). This system operates with a gain factor that is always being gradually minimized so as to let the gyro flywheel (12) develop as much precession as possible - the higher the precession, the higher the roll stabilising moment. This continuous gain change provides adaptation to changes in sea state and sailing conditions. The system effectively predicts the likelihood of maximum precession being reached. Should this event be detected, then the gain is rapidly increased so as to provide a breaking precession torque. Once the event has passed, the system again attempts to gradually decrease the gain.

Comparison of active-set method deconvolution and matched-filtering for derivation of an ultrasound transit time spectrum

The quality of ultrasound computed tomography imaging is primarily determined by the accuracy of ultrasound transit time measurement. A major problem in analysis is the overlap of signals making it difficult to detect the correct transit time. The current standard is to apply a matched-filtering approach to the input and output signals. This study compares the matched-filtering technique with active set deconvolution to derive a transit time spectrum from a coded excitation chirp signal and the measured output signal. The ultrasound wave travels in a direct and a reflected path to the receiver, resulting in an overlap in the recorded output signal. The matched-filtering and deconvolution techniques were applied to determine the transit times associated with the two signal paths. Both techniques were able to detect the two different transit times; while matched-filtering has a better accuracy (0.13 μs vs. 0.18 μs standard deviation), deconvolution has a 3.5 times improved side-lobe to main-lobe ratio. A higher side-lobe suppression is important to further improve image fidelity. These results suggest that a future combination of both techniques would provide improved signal detection and hence improved image fidelity.

Infant product-related injuries: comparing specialised injury surveillance and routine emergency department data

- Objective To explore the potential for using a basic text search of routine emergency department data to identify product-related injury in infants and to compare the patterns from routine ED data and specialised injury surveillance data. - Methods Data was sourced from the Emergency Department Information System (EDIS) and the Queensland Injury Surveillance Unit (QISU) for all injured infants between 2009 and 2011. A basic text search was developed to identify the top five infant products in QISU. Sensitivity, specificity, and positive predictive value were calculated and a refined search was used with EDIS. Results were manually reviewed to assess validity. Descriptive analysis was conducted to examine patterns between datasets. - Results The basic text search for all products showed high sensitivity and specificity, and most searches showed high positive predictive value. EDIS patterns were similar to QISU patterns with strikingly similar month-of-age injury peaks, admission proportions and types of injuries. - Conclusions This study demonstrated a capacity to identify a sample of valid cases of product-related injuries for specified products using simple text searching of routine ED data. - Implications As the capacity for large datasets grows and the capability to reliably mine text improves, opportunities for expanded sources of injury surveillance data increase. This will ultimately assist stakeholders such as consumer product safety regulators and child safety advocates to appropriately target prevention initiatives.

Evaluation of growth and changes in body composition following neonatal diagnosis of cystic fibrosis

Early deficits in nutritional status that might require specific treatment and early response to nutritional therapy were studied longitudinally in 25 infants with cystic fibrosis (CF) diagnosed by neonatal screening, using anthropometric and research body composition methodology, and evaluation of pancreatic function. At the time of confirmed diagnosis (mean 5.4 weeks), body mass, length, total body fat (TBF), and total body potassium (TBK) were all significantly reduced. Following diagnosis and commencement of therapy there was a normalization of weight, length, and TBK by 6-12 months of age, indicating catch-up growth. But in some individuals the response was incomplete, and as a group, mean total body fat remained significantly lower than normal at 1 year of age. Seven of 25 (28%) were pancreatic sufficient at diagnosis, and all but one had evidence of declining pancreatic function requiring the institution of pancreatic enzyme therapy during the next 1-9 months. The median age of commencement of enzyme therapy was 10 weeks (range 5 weeks to 11 months). These longitudinal assessments emphasize the dynamic changes occurring in absorptive function, body composition, and nutritional status following neonatal diagnosis of cystic fibrosis and may reflect previously described abnormalities of energy metabolism in this age group. Abnormal body composition is evident in most CF infants following diagnosis by neonatal screening but pancreatic damage may still be evolving. We suggest that early active nutritional therapy and surveillance for changes in pancreatic function are warranted in CF infants diagnosed by neonatal screening.

Non-melanoma skin cancer: Ten years of cancer-registry-based surveillance

The Tasmanian Cancer Registry carried out population-based surveillance of non-melanoma skin cancer (NMSC) from 1978 to 1987. A total of 8,651 NMSC were recorded in 7,160 individuals, representing an age-standardized rate of 161/100,000 per year. Ninety-four percent of cases were based on histological diagnosis. Incidence of basal-cell carcinoma (BCC) was higher than the incidence of squamous-cell carcinoma (SCC). The incidence of NMSC was twice as high in men as in women. Incidence increased substantially with age, more markedly for SCC than BCC. For most body sites, BCC was more frequent, but on highly exposed sites such as the backs of hands, lower limbs in women and ears in men, the incidence of SCC was higher. There was an overall increase of 7% per year in the age-standardized incidence rate of NMSC. The increase was more marked for BCC than for SCC, and was consistent across age groups and both sexes. A first NMSC during the study period was associated with a 12-fold increase among men and a 15-fold increase among women in the risk of development of a new NMSC within 5 years, when compared with the NMSC incidence recorded for the population as a whole.

Pedagogical tools designed to promote engagement and active learning in the biomedical sciences and allied health disciplines

Perceiving students, science students especially, as mere consumers of facts and information belies the importance of a need to engage them with the principles underlying those facts and is counter-intuitive to the facilitation of knowledge and understanding. Traditional didactic lecture approaches need a re-think if student classroom engagement and active learning are to be valued over fact memorisation and fact recall. In our undergraduate biomedical science programs across Years 1, 2 and 3 in the Faculty of Health at QUT, we have developed an authentic learning model with an embedded suite of pedagogical strategies that foster classroom engagement and allow for active learning in the sub-discipline area of medical bacteriology. The suite of pedagogical tools we have developed have been designed to enable their translation, with appropriate fine-tuning, to most biomedical and allied health discipline teaching and learning contexts. Indeed, aspects of the pedagogy have been successfully translated to the nursing microbiology study stream at QUT. The aims underpinning the pedagogy are for our students to: (1) Connect scientific theory with scientific practice in a more direct and authentic way, (2) Construct factual knowledge and facilitate a deeper understanding, and (3) Develop and refine their higher order flexible thinking and problem solving skills, both semi-independently and independently. The mindset and role of the teaching staff is critical to this approach since for the strategy to be successful tertiary teachers need to abandon traditional instructional modalities based on one-way information delivery. Face-to-face classroom interactions between students and lecturer enable realisation of pedagogical aims (1), (2) and (3). The strategy we have adopted encourages teachers to view themselves more as expert guides in what is very much a student-focused process of scientific exploration and learning. Specific pedagogical strategies embedded in the authentic learning model we have developed include: (i) interactive lecture-tutorial hybrids or lectorials featuring teacher role-plays as well as class-level question-and-answer sessions, (ii) inclusion of “dry” laboratory activities during lectorials to prepare students for the wet laboratory to follow, (iii) real-world problem-solving exercises conducted during both lectorials and wet laboratory sessions, and (iv) designing class activities and formative assessments that probe a student’s higher order flexible thinking skills. Flexible thinking in this context encompasses analytical, critical, deductive, scientific and professional thinking modes. The strategic approach outlined above is designed to provide multiple opportunities for students to apply principles flexibly according to a given situation or context, to adapt methods of inquiry strategically, to go beyond mechanical application of formulaic approaches, and to as much as possible self-appraise their own thinking and problem solving. The pedagogical tools have been developed within both workplace (real world) and theoretical frameworks. The philosophical core of the pedagogy is a coherent pathway of teaching and learning which we, and many of our students, believe is more conducive to student engagement and active learning in the classroom. Qualitative and quantitative data derived from online and hardcopy evaluations, solicited and unsolicited student and graduate feedback, anecdotal evidence as well as peer review indicate that: (i) our students are engaging with the pedagogy, (ii) a constructivist, authentic-learning approach promotes active learning, and (iii) students are better prepared for workplace transition.

Empowering innovative and active citizens: Design education in an Australian independent school

Consumerism is arguably one of the strongest forces affecting society today. Its affect on young people and their ability and desire to create, design, and innovate is cause for concern. It has been suggested that design, when viewed as “a fundamental category of meaning making” (Cope and Kalantzis, 2010, p.597), can be conceived as a “foundational paradigm for representation and action” (Cope and Kalantzis, 2011, p.49). As a component of a general education, it has the capacity to give future generations a framework for collaborative creative and critical thinking required for business innovation, while developing resourceful optimism, motivation, morality and the citizenship needed to develop awareness and resilience to this ideology (Design Commission, 2011; Design Council, 2011). However, to date clearly defined frameworks and empirical data surrounding design education integration in secondary school contexts and its impact on innovation and active citizenship in Australia, is extremely limited. This paper will explore the value of a hands-on and collaborative design-based education model in an independent secondary school environment in Australia and its effect on students’ self- perception, core beliefs, empowered participation and ability to innovate towards sustainability. Following is an overview of relevant literature, the research question, and potential significance and contribution of this research.

Variation in health care-associated infection surveillance practices in Australia

In the absence of a national health care-associated infection surveillance program in Australia, differences between existing state-based programs were explored using an online survey. Only 51% of respondents who undertake surveillance have been trained, fewer than half perform surgical site infection surveillance prospectively, and only 41% indicated they risk adjust surgical site infection data. Wide- spread variation of surveillance methods highlights future challenges when considering the development and implementation of a national program in Australia.

Harnessing information from injury narrative in the 'big data' era: Understanding and applying machine learning for injury surveillance

Objective Vast amounts of injury narratives are collected daily and are available electronically in real time and have great potential for use in injury surveillance and evaluation. Machine learning algorithms have been developed to assist in identifying cases and classifying mechanisms leading to injury in a much timelier manner than is possible when relying on manual coding of narratives. The aim of this paper is to describe the background, growth, value, challenges and future directions of machine learning as applied to injury surveillance. Methods This paper reviews key aspects of machine learning using injury narratives, providing a case study to demonstrate an application to an established human-machine learning approach. Results The range of applications and utility of narrative text has increased greatly with advancements in computing techniques over time. Practical and feasible methods exist for semi-automatic classification of injury narratives which are accurate, efficient and meaningful. The human-machine learning approach described in the case study achieved high sensitivity and positive predictive value and reduced the need for human coding to less than one-third of cases in one large occupational injury database. Conclusion The last 20 years have seen a dramatic change in the potential for technological advancements in injury surveillance. Machine learning of ‘big injury narrative data’ opens up many possibilities for expanded sources of data which can provide more comprehensive, ongoing and timely surveillance to inform future injury prevention policy and practice.

Discovering urban citizenship in the surveillance society

Cities and urban spaces around the world are changing rapidly from their origins in the industrialising world to a post-industrial, hard wired landscape. A further embellishment is the advent of mobile media technologies supported by both existing and new communications and computing technology which claim to put the urban dweller at the heart of a new, informed and ‘liberated’ seat of participatory urban governance. This networked, sensor enabled society permits flows of information in a multitude of directions ostensibly empowering the citizenry through ‘smart’ installations such as ‘talking bus stops’ detailing services, delays, transport interconnections and even weather conditions along desired routes. However, while there is considerable potential for creative and transformative kinds of citizen participation, there is also the momentum for ‘function-creep’, whereby vast amounts of data are garnered in a broad application of urban surveillance. This kind of monitoring and capacity for surveillance connects with attempts by civic authorities to regulate, restrict, rebrand and reframe urban public spaces into governable and predictable arenas of consumption. This article considers questions around the possibilities for retaining and revitalising forms of urban citizenship, set in the context of Marshall’s original premise of civil, social and political citizenship(s) in the middle of the last century, following World War Two and the coming of the modern welfare state.

Novel modulation strategy for a CLC resonant dual active bridge

This paper proposes a novel modulation strategy for a phase controlled Capacitor-Inductor-Capacitor (CLC) Resonant Dual Active Bridge (RDAB). The proposed modulation strategy improves the soft turn-on, Zero-Current-Switching (ZCS) and Zero-Voltage-Switching (ZVS) range of the converter while only minimally increasing the required reactive currents in the ac link. A mathematical analysis of the proposed modulation scheme is presented along with a theoretical loss comparison between several modulation strategies. The proposed modulation strategy was implemented and the experimental results are presented.

Fine-tuning of unmanned aerial surveillance for ecological systems

Much of our understanding and management of ecological processes requires knowledge of the distribution and abundance of species. Reliable abundance or density estimates are essential for managing both threatened and invasive populations, yet are often challenging to obtain. Recent and emerging technological advances, particularly in unmanned aerial vehicles (UAVs), provide exciting opportunities to overcome these challenges in ecological surveillance. UAVs can provide automated, cost-effective surveillance and offer repeat surveys for pest incursions at an invasion front. They can capitalise on manoeuvrability and advanced imagery options to detect species that are cryptic due to behaviour, life-history or inaccessible habitat. UAVs may also cause less disturbance, in magnitude and duration, for sensitive fauna than other survey methods such as transect counting by humans or sniffer dogs. The surveillance approach depends upon the particular ecological context and the objective. For example, animal, plant and microbial target species differ in their movement, spread and observability. Lag-times may exist between a pest species presence at a site and its detectability, prompting a need for repeat surveys. Operationally, however, the frequency and coverage of UAV surveys may be limited by financial and other constraints, leading to errors in estimating species occurrence or density. We use simulation modelling to investigate how movement ecology should influence fine-scale decisions regarding ecological surveillance using UAVs. Movement and dispersal parameter choices allow contrasts between locally mobile but slow-dispersing populations, and species that are locally more static but invasive at the landscape scale. We find that low and slow UAV flights may offer the best monitoring strategy to predict local population densities in transects, but that the consequent reduction in overall area sampled may sacrifice the ability to reliably predict regional population density. Alternative flight plans may perform better, but this is also dependent on movement ecology and the magnitude of relative detection errors for different flight choices. Simulated investigations such as this will become increasingly useful to reveal how spatio-temporal extent and resolution of UAV monitoring should be adjusted to reduce observation errors and thus provide better population estimates, maximising the efficacy and efficiency of unmanned aerial surveys.

Symposium: Food pricing and affordability of ‘healthy’ versus ‘less healthy’ diets: An international approach to monitoring and surveillance

Symposium co-ordinated by The International Network for Food and Obesity/NCDs Research, Monitoring and Action Support (INFORMAS) Purpose Global monitoring of the price and affordability of foods, meals and diets is urgently needed. There are major methodological challenges in developing robust, cost-effective, standardized, and policy relevant tools, pertinent to nutrition, obesity, and diet-related non-communicable diseases and their inequalities. There is increasing pressure to take into account environmental sustainability. Changes in price differentials and affordability need to be comparable between and within countries and over time. Robust tools could provide baseline data for monitoring and evaluating structural, economic and social policies at the country/regional and household levels. INFORMAS offers one framework for consideration.

Use of semi-active dampers in seismic mitigation of building structures

This research provides information for providing the required seismic mitigation in building structures through the use of semi active and passive dampers. The Magneto-Rheological (MR) semi-active damper model was developed using control algorithms and integrated into seismically excited structures as a time domain function. Linear and nonlinear structure models are evaluated in real time scenarios. Research information can be used for the design and construction of earthquake safe buildings with optimally employed MR dampers and MR-passive damper combinations.