Voltage unbalance reduction in low voltage feeders by dynamic switching of residential customers among three phases

Low voltage distribution feeders with large numbers of single phase residential loads experience severe current unbalance that often causes voltage unbalance problems. The addition of intermittent generation and new loads in the form of roof top photovoltaic generation and electric vehicles makes these problems even more acute. In this paper, an intelligent dynamic residential load transfer scheme is proposed. Residential loads can be transferred from one phase to another phase to minimize the voltage unbalance along the feeder. Each house is supplied through a static transfer switch with three-phase input and single-phase output connection. The main controller, installed at the transformer will observe the power consumption in each load and determine which house(s) should be transferred from one phase to another in order to keep the voltage unbalance in the feeder at a minimum. The efficacy of the proposed load transfer scheme is verified through MATLAB and PSCAD/EMTDC simulations.

Rural people and the land

There is a long and fundamental connection between rural place and the land. Whereas land is simply the foundation for the construction of towns and cities, whose urban culture and economy thrives on human ingenuity and industry that may have little direct attachment to the physical ground over which it occurs, historical discourses of rurality place the land at the heart of the rural economy and society. Rural people, such discourses hold, live on the land, work the land, tend the land and know the land. The land formed not only the base of the rural economy (as ‘a physical, tangible resource which can be ploughed, sown, grazed, built upon’ (Macnaghten and Urry 1998, 200)), but also shaped rural culture and the rural calendar, and contributed to the constitution of the rural character (see Bell 1994). As such, the land is central to rural sense of place.

Knitted images : corporeal theorising

Feeling the wool and needles and constructing the knitting is very different to looking at knitting or thinking about knitting. Creating with the material slows everything down enough to enable significant connection with the process. Knitting as a mode for researching involves corporeal activity/philosophy that foregrounds a physical rationality, and this offers critical investigation of knowledge conventions that hierarchize intellectual activity as something that seeks to justify or clarify via a cerebral mode of presenting reasonable and rational arguments...

Knitted images : interception

Feeling the wool and needles and constructing the knitting is very different to looking at knitting or thinking about knitting. Creating with the material slows everything down enough to enable significant connection with the process. Knitting as a mode for researching involves corporeal activity/philosophy that foregrounds a physical rationality, and this offers critical investigation of knowledge conventions that hierarchize intellectual activity as something that seeks to justify or clarify via a cerebral mode of presenting reasonable and rational arguments...

The value of political connections : evidence from Korean chaebols

This thesis examines the value of political connections for business groups by constructing a unique dataset that allows us to identify the form and extent of the connections. Results show firms' membership to family-controlled business groups (South Korean chaebol) play a key role in determining the value of political connections. Politically connected chaebol firms experience substantial price increases following the establishment of the connection than other firms, but the reverse is found for other (non-family-controlled) connected business groups.

Developing a culture to support peer review of teaching in higher education

This presentation addresses issues related to leadership, academic development and scholarship of teaching and learning, and highlights research funded by the Australian Office of Learning and Teaching (OLT) designed to embed and sustain peer review of teaching within the culture of 5 Australian universities: Queensland University of Technology, University of Technology, Sydney, University of Adelaide, Curtin University, and Charles Darwin University. Peer review of teaching in higher education will be emphasised as a professional process for providing feedback on teaching and learning practice, which if sustained, can become an effective ongoing strategy for academic development (Barnard et al, 2011; Bell, 2005; Bolt and Atkinson, 2010; McGill & Beaty 2001, 1992; Kemmis & McTaggart, 2000). The research affirms that using developmental peer review models (Barnard et al, 2011; D'Andrea, 2002; Hammersley-Fletcher & Orsmond, 2004) can bring about successful implementation, especially when implemented within a distributive leadership framework (Spillane & Healey, 2010). The project’s aims and objectives were to develop leadership capacity and integrate peer review as a cultural practice in higher education. The research design was a two stage inquiry process over 2 years. The project began in July 2011 and encompassed a development and pilot phase followed by a cascade phase with questionnaire and focus group evaluation processes to support ongoing improvement and measures of outcome. Leadership development activities included locally delivered workshops complemented by the identification and support of champions. To optimise long term sustainability, the project was implemented through existing learning and teaching structures and processes within the respective partner universities. Research outcomes highlight the fundamentals of peer review of teaching and the broader contextual elements of integration, leadership and development, expressed as a conceptual model for embedding peer review of teaching within higher education. The research opens a communicative space about introduction of peer review that goes further than simply espousing its worth and introduction. The conceptual model highlights the importance of development of distributive leadership capacity, integration of policies and processes, and understanding the values, beliefs, assumptions and behaviors embedded in an organizational culture. The presentation overviews empirical findings that demonstrate progress to advance peer review requires an ‘across-the-board’ commitment to embed change, and inherently demands a process that co-creates connection across colleagues, discipline groups, and the university sector. Progress toward peer review of teaching as a cultural phenomenon can be achieved and has advantages for academic staff, scholarship, teaching evaluation and an organisation, if attention is given to strategies that influence the contexts and cultures of teaching practice. Peer review as a strategy to develop excellence in teaching is considered from a holistic perspective that by necessity encompasses all elements of an educational environment and has a focus on scholarship of teaching. The work is ongoing and has implication for policy, research, teaching development and student outcomes, and has potential application world-wide.

Analysis of temporary traffic control cost items in transportation construction bidding process

Temporary Traffic Control Plans (TCP’s), which provide construction phasing to maintain traffic during construction operations, are integral component of highway construction project design. Using the initial design, designers develop estimated quantities for the required TCP devices that become the basis for bids submitted by highway contractors. However, actual as-built quantities are often significantly different from the engineer’s original estimate. The total cost of TCP phasing on highway construction projects amounts to 6–10% of the total construction cost. Variations between engineer estimated quantities and final quantities contribute to reduced cost control, increased chances of cost related litigations, and bid rankings and selection. Statistical analyses of over 2000 highway construction projects were performed to determine the sources of variation, which later were used as the basis of development for an automated-hybrid prediction model that uses multiple regressions and heuristic rules to provide accurate TCP quantities and costs. The predictive accuracy of the model developed was demonstrated through several case studies.

Lessons from a face-to-face meeting on embedding Aboriginal and Torres Strait Islander perspectives : ‘A contract of intimacy’

This paper presents the findings from a conversation between an Aboriginal educator and a non-Indigenous pre-service educator about the importance and complexities of building productive partnerships. Although the participants focused on the challenges and benefits of building relationships between Aboriginal and Torres Strait Islander educators and non-Indigenous educators in Australian early years settings, the more significant outcome of the meeting was the personal connection two young women were able to make when a friendship began to develop. The project was intended to enable an opportunity for the participants ‘to engage in reflexivity on their pedagogic work’, something Mills (2012) understands as crucial to the support of social justice and transformation in the classroom.

Polycaprolactone scaffold and reduced rhBMP-7 dose for the regeneration of critical-sized defects in sheep tibiae

The transplantation of autologous bone graft as a treatment for large bone defects has the limitation of harvesting co-morbidity and limited availability. This drives the orthopaedic research community to develop bone graft substitutes. Routinely, supra-physiological doses of bone morphogenetic proteins (BMPs) are applied perpetuating concerns over undesired side effects and cost of BMPs. We therefore aimed to design a composite scaffold that allows maintenance of protein bioactivity and enhances growth factor retention at the implantation site. Critical-sized defects in sheep tibiae were treated with the autograft and with two dosages of rhBMP-7, 3.5 mg and 1.75 mg, embedded in a slowly degradable medical grade poly(ε-caprolactone) (PCL) scaffold with β-tricalcium phosphate microparticles (mPCL-TCP). Specimens were characterised by biomechanical testing, microcomputed tomography and histology. Bridging was observed within 3 months for the autograft and both rhBMP-7 treatments. No significant difference was observed between the low and high rhBMP-7 dosages or between any of the rhBMP-7 groups and autograft implantation. Scaffolds alone did not induce comparable levels of bone formation compared to the autograft and rhBMP-7 groups. In summary, the mPCL-TCP scaffold with the lower rhBMP-7 dose led to equivalent results to autograft transplantation or the high BMP dosage. Our data suggest a promising clinical future for BMP application in scaffold-based bone tissue engineering, lowering and optimising the amount of required BMP.

Design, characterisation and in vivo testing of a new, adjustable stiffness, external fixator for the rat femur

Very little is known about the infl uence of the mechanical environment on the healing of large segmental defects. This partly reflects the lack of standardised, well characterised technologies to enable such studies. Here we report the design, construction and characterisation of a novel external fixator for use in conjunction with rat femoral defects. This device not only imposes a predetermined axial stiffness on the lesion, but also enables the stiffness to be changed during the healing process. The main frame of the fi xator consists of polyethylethylketone with titanium alloy mounting pins. The stiffness of the fi xator is determined by interchangeable connection elements of different thicknesses. Fixators were shown to stabilise 5 mm femoral defects in rats in vivo for at least 8 weeks during unrestricted cage activity. No distortion or infections, including pin infections, were noted. The healing process was simulated in vitro by inserting into a 5 mm femoral defect, materials whose Young’s moduli approximated those of the different tissues present in regenerating bone. These studies confirmed that, although the external fixator is the major determinant of axial stiffness during the early phase of healing, the regenerate within the lesion subsequently dominates this property. There is much clinical interest in altering the mechanics of the defect to enhance bone healing. Our data suggest that, if alteration of the mechanical environment is to be used to modulate the healing of large segmental defects, this needs to be performed before the tissue properties become dominant.

Design of light gauge steel roofing systems subject to high wind forces

Light gauge steel roofing systems made of thin profiled roof sheeting and battens are used commonly in residential, industrial and commercial buildings. Their critical design load combination is that due to wind uplift forces that occur during high wind events such as tropical cyclones and thunderstorms. However, premature local failures at their screw connections have been a concern for many decades since cyclone Tracy that devastated Darwin in 1974. Extensive research that followed cyclone Tracy on the pull-through and pull-out failures of roof sheeting to batten connections has significantly improved the safety of roof sheeting. However, this has made the batten to rafter/truss connection the weakest, and recent wind damage investigations have shown the failures of these connections and the resulting loss of entire roof structures. Therefore an experimental research program using both small scale and full scale air-box tests is currently under way to investigate the pull-through failures of thin-walled steel battens under high wind uplift forces. Tests have demonstrated that occurrence of pull-through failures in the bottom flanges of steel batttens and the need to develop simple test and design methods as a function of many critical parameters such as steel batten geometry, thickness and grade, screw fastener sizes and other fastening details. This paper presents the details of local failures that occur in light fauge roofing systems, a review of the current design and test methods for steel battens and associated short comings, and the test results obtained to date on pull-through failures of battens from small scale and full scale tests. Finally, it proposes the use of suitable small scale test methods that can be used by both researchers and manufacturers of such screw-fastened light gauge steel batten systems.

The Medics - "Foundations"

The Medics “Foundations” is a full-length album of popular music completed over a 13-month period and released in 2012, with work taking place in Byron Bay’s 301 studios and Brisbane’s Airlock studios. “Foundations” contributes to studies in the field of music production, as well as furthering research into the place of Indigenous youth culture within contemporary rock music. The music draws on elements of folk, post rock and hardcore to create a dynamic and cinematic sound, framed by lyrics that focus on spirituality, nature and a connection to the land. Artists such as At the Drive In and Mars Volta were referenced in the production of the record. Scholars such as Joe Bennett have argued that the relationship between songwriting practice and song product is an under-explored area in popular musicology, and, by using a practice-led research methodology, the production of “Foundations” extends these creative inquiries. “Foundations” was produced with the assistance of a competitive grant, the Cultural Minister’s Council Breakthrough initiative, which assists emerging Indigenous contemporary musicians. The album was well received and positively reviewed, resulting in the band signing a record deal with Warner Music and a publishing deal with Albert’s Music. It was album of the week on Triple J and several singles were placed on high rotation. A review on Themusic.com.au highlighted the production work: “Producer Yanto Browning has captured the impassioned live intent the band have built their reputation on and bottled it into 11 impeccable tracks, the album maintaining their onstage vigour while polishing it just enough to allow it to burn brightly through the speakers.” As a result of the record, The Medics were invited to play Splendour in the Grass, the national Big Day Out tour and a series of shows in South America.

Invisible connections : investigating older people's emotions and social relations around objects

The advent of the Internet of Things creates an interest in how people might interrelate through and with networks of internet enabled objects. With an emphasis on fostering social connection and physical activity among older people, this preliminary study investigated objects that people over the age of 65 years viewed as significant to them. We conducted contextual interviews in people's homes about their significant objects in order to understand the role of the objects in their lives, the extent to which they fostered emotional and social connections and physical activity, and how they might be augmented through internet connection. Discussion of significant objects generated considerable emotion in the participants. We identified objects of comfort and routine, objects that exhibited status, those that fostered independence and connection, and those that symbolized relationships with loved ones. These findings lead us to consider implications for the design of interconnected objects.

A dual inverter-based supercapacitor direct integration scheme for wind energy conversion systems

Interfacing converters used in connecting energy storage systems like supercapacitors and battery banks to wind power systems introduce additional cost and power losses. This paper therefore presents a direct integration scheme for supercapacitors used in mitigating short-term power fluctuations in wind power systems. This scheme uses a dual inverter topology for both grid connection and interfacing a supercapacitor bank. The main inverter of the dual inverter system is powered by the rectified output of a wind turbine-coupled permanent-magnet synchronous generator. The auxiliary inverter is directly connected to the supercapacitor bank. With this approach, an interfacing converter is not required, and there are no associated costs and power losses incurred. The operation of the proposed system is discussed in detail. Simulation and experimental results are presented to verify the efficacy of the proposed system in suppressing short-term wind power fluctuations.

Pragmatic two-way communication : a practitioner perspective on dialogue in public relations

Public relations has traditionally claimed a close association with dialogue, but this research demonstrates that formal notions of dialogue have little relevance to the real world of public relations practice. Instead, practitioners undertake pragmatic forms of two-way communication, because the constraints within which they work mean dialogue is difficult if not impossible to carry out. This qualitative research project shows that although the label of 'dialogue' has been co-opted in both the theory and practice of public relations, this claimed connection is not supported by empirical evidence.