Computed wall stress may predict the growth of abdominal aortic aneurysm

Growth rate of abdominal aortic aneurysm (AAA) is thought to be an important indicator of the potential risk of rupture. Wall stress is also thought to be a trigger for its rupture. However, stress change during the expansion of an AAA is unclear. Forty-four patients with AAAs were included in this longitudinal follow-up study. They were assessed by serial abdominal ultrasonography and computerized tomography (CT) scans if a critical size was reached or a rapid expansion occurred. Patient-specific 3-dimensional AAA geometries were reconstructed from the follow-up CT images. Structural analysis was performed to calculate the wall stresses of the AAA models at both baseline and final visit. A non-linear large-strain finite element method was used to compute the wall stress distribution. The average growth rate was 0.66cm/year (range 0-1.32 cm/year). A significantly positive correlation between shoulder tress at baseline and growth rate was found (r=0.342; p=0.02). A higher shoulder stress is associated with a rapidly expanding AAA. Therefore, it may be useful for estimating the growth expansion of AAAs and further risk stratification of patients with AAAs.

Carotid arterial plaque stress analysis using fluid-structure interactive simulation based on in-vivo magnetic resonance images of four patients

The rupture of atherosclerotic plaques is known to be associated with the stresses that act on or within the arterial wall. The extreme wall tensile stress (WTS) is usually recognized as a primary trigger for the rupture of vulnerable plaque. The present study used the in-vivo high-resolution multi-spectral magnetic resonance imaging (MRI) for carotid arterial plaque morphology reconstruction. Image segmentation of different plaque components was based on the multi-spectral MRI and co-registered with different sequences for the patient. Stress analysis was performed on totally four subjects with different plaque burden by fluid-structure interaction (FSI) simulations. Wall shear stress distributions are highly related to the degree of stenosis, while the level of its magnitude is much lower than the WTS in the fibrous cap. WTS is higher in the luminal wall and lower at the outer wall, with the lowest stress at the lipid region. Local stress concentrations are well confined in the thinner fibrous cap region, and usually locating in the plaque shoulder; the introduction of relative stress variation during a cycle in the fibrous cap can be a potential indicator for plaque fatigue process in the thin fibrous cap. According to stress analysis of the four subjects, a risk assessment in terms of mechanical factors could be made, which may be helpful in clinical practice. However, more subjects with patient specific analysis are desirable for plaque-stability study.

Developing a new index for comparing road safety maturity: Case study of the ASEAN community

As part of the development of the ASEAN Regional Road Safety Strategy, a new index for measuring road safety maturity (RSM) was constructed from numerical weightings given to measurable factors presented for each of the pillars that guide national road safety plans and activities in WHO Global Road Safety Report 2013: road safety management, safer road and mobility, safer vehicles, safer road users and post-crash response. The index is based on both a content analysis approach and a binary methodology (report/no report) including measures which have been considered pertinent and not redundant. For instance, the use of random breath testing and/or police checkpoints in the national drink driving law are combined in the enforcement index. The value of the index per pillar ranges from 0 to 100%, taking into account whether there is total, partial or non-implementation of certain actions. In addition, when possible, the self-rated level of enforcement is included. The overall ratings for the I 0 ASEAN countries and the scores for each of the pillars are presented in the paper. The extent to which the RSM index is a valid indicator of road safety performance is also discussed.

Atmospheric visibility and PM10 as indicators of new particle formation in an urban environment

It is well-known that new particle formation (NPF) in the atmosphere is inhibited by pre-existing particles in the air that act as condensation sinks to decrease the concentration and, thus, the supersaturation of precursor gases. In this study, we investigate the effects of two parameters - atmospheric visibility, expressed as the particle back-scatter coefficient (BSP), and PM10 particulate mass concentration, on the occurrences of NPF events in an urban environment where the majority of precursor gases originate from motor vehicle and industrial sources. This is the first attempt to derive direct relationships between each of these two parameters and the occurrence of NPF. NPF events were identified from data obtained with a neutral cluster and air ion spectrometer over 245 days within a calendar year. Bayesian logistic regression was used to determine the probability of observing NPF as functions of BSP and PM10. We show that the BSP at 08 h on a given day is a reliable indicator of an NPF event later that day. The posterior median probability of observing an NPF event was greater than 0.5 (95%) when the BSP at 08 h was less than 6.8 Mm-1.

Traffic safety at road–rail level crossings using a driving simulator and traffic simulation

Several intelligent transportation systems (ITS) were used with an advanced driving simulator to assess its influence on driving behavior. Three types of ITS interventions were tested: video in vehicle, audio in vehicle, and on-road flashing marker. The results from the driving simulator were inputs for a developed model that used traffic microsimulation (VISSIM 5.4) to assess the safety interventions. Using a driving simulator, 58 participants were required to drive through active and passive crossings with and without an ITS device and in the presence or absence of an approaching train. The effect of changes in driver speed and compliance rate was greater at passive crossings than at active crossings. The slight difference in speed of drivers approaching ITS devices indicated that ITS helped drivers encounter crossings in a safer way. Since the traffic simulation was not able to replicate a dynamic speed change or a probability of stopping that varied depending on ITS safety devices, some modifications were made to the traffic simulation. The results showed that exposure to ITS devices at active crossings did not influence drivers’ behavior significantly according to the traffic performance indicator, such as delay time, number of stops, speed, and stopped delay. However, the results of traffic simulation for passive crossings, where low traffic volumes and low train headway normally occur, showed that ITS devices improved overall traffic performance.

Peritoneal washing cytology

Peritoneal washing cytology (PWC) is a useful indicator of ovarian surface involvement and peritoneal dissemination by ovarian tumours. It may identify subclinical peritoneal spread and thus provide valuable staging and prognostic information, particularly for non-serous ovarian tumours. The role of PWC as a prognostic indicator for endometrial carcinoma is less clear, due in part to the questionable significance of identifying endometrial tumour cells in the peritoneum. Detection of metastatic carcinoma in PWC is based on recognition of non-mesothelial cell characteristics, however a number of conditions such as reactive mesothelial cells, endometriosis and endosalpingiosis may mimic this appearance. Cells from these conditions may have a similar presentation in PWC to that of serous borderline tumours and low grade serous carcinoma. The presence of cilia, lack of single atypical cells, prominent cytoplasmic vacuolation, marked nuclear atypia or two distinct cell populations are features favouring a benign process. Attention to these features along with close correlation with clinical history and the results of surgical pathology should help avoid errors. Additional assistance may be provided by the use of cell blocks and special stains.

'I wonder what you know...': Teachers designing requests for factual information

Optimizing the quality of early childhood education (ECE) is an international policy priority. Teacher-child interactions have been identified as the strongest indicator of quality and most potent predictor of child outcomes. This paper presents ethnomethodological and conversation analysis of an interaction between an early childhood educator with two children as they engage with each other, while performing a Web search. Analyses shows that question design can elicit qualitatively different responses with regard to sustained interactions. Understanding the design of teacher questions has pedagogic implications for the work of the teacher and for the broader quality agenda in early childhood education.

Does gait speed indicate prosthetic walking potential following lower limb amputation?

Background: Gait speed is an indicator of walking ability, morbidity and mortality; and is a reliable, valid and sensitive outcome measure commonly used in the rehabilitation setting. Gait speed is a quick and efficient assessment method; yet, to date, there has been little investigation of its potential use in populations with lower limb amputation.

Sonography of paediatric appendicitis and its secondary signs

Sonographic diagnosis of appendicitis in children is an important clinical tool, often obviating the need for potentially harmful ionising radiation from computed tomography (CT) scans and unnecessary appendectomies. Established criteria do not commonly account for the sonographic secondary signs of acute appendicitis as an adjunct or corollary to an identifiably inflamed appendix. If one of, or combinations of these secondary signs are a reliable positive and/or negative indicator of the condition, diagnostic accuracy may be improved. This will be of particular importance in cases where the appendix cannot be easily identified, possibly providing referring clinicians with a less equivocal diagnosis. Acute appendicitis (AA) is the most common emergency presentation requiring surgical intervention among both adults and children. During 2010-11 in Australia 25000 appendicectomies were performed on adults and children, more than double the number of the next most common surgical procedure [1]. Ultrasound has been commonly used to diagnose AA since the 1980s, however the best imaging modality or combination of modalities to accurately and cost-effectively diagnose the condition is still debated. A study by Puylaert advocated ultrasound in all presentations [2], whereas others suggested it only as a first line modality [3–5]. Conversely, York et al state that it is not appropriate as it delays treatment [6]. CT has been shown to more accurately diagnose AA than ultrasound, however its inherent radiation risks warrant cautionary use in children [7]. Improved accuracy in the diagnosis of suspected AA using ultrasound would enable surgeons to make a decision without the need to expose children to the potentially harmful effects of CT. Secondary signs of appendicitis are well established [8], although research into their predictive values has only recently been undertaken [9,10] indicating their potential diagnostic benefit in the absence of an identifiable appendix. The purpose of this review is to examine the history of appendiceal sonography, established sonographic criteria, paediatric specific techniques and the predictive value of secondary signs.

The Feeding Practices and Structure Questionnaire (FPSQ-28): A parsimonious version validated for longitudinal use from 2-5 years

Prospective studies and intervention evaluations that examine change over time assume that measurement tools measure the same construct at each occasion. In the area of parent-child feeding practices, longitudinal measurement properties of the questionnaires used are rarely verified. To ascertain that measured change in feeding practices reflects true change rather than change in the assessment, structure, or conceptualisation of the constructs over time, this study examined longitudinal measurement invariance of the Feeding Practices and Structure Questionnaire (FPSQ) subscales (9 constructs; 40 items) across 3 time points. Mothers participating in the NOURISH trial reported their feeding practices when children were aged 2, 3.7, and 5 years (N = 404). Confirmatory Factor Analysis (CFA) within a structural equation modelling framework was used. Comparisons of initial cross-sectional models followed by longitudinal modelling of subscales, resulted in the removal of 12 items, including two redundant or poorly performing subscales. The resulting 28-item FPSQ-28 comprised 7 multi-item subscales: Reward for Behaviour, Reward for Eating, Persuasive Feeding, Overt Restriction, Covert Restriction, Structured Meal Setting and Structured Meal Timing. All subscales showed good fit over 3 time points and each displayed at least partial scalar (thresholds equal) longitudinal measurement invariance. We recommend the use of a separate single item indicator to assess the family meal setting. This is the first study to examine longitudinal measurement invariance in a feeding practices questionnaire. Invariance was established, indicating that the subscales of the shortened FPSQ-28 can be used with mothers to validly assess change in 7 feeding constructs in samples of children aged 2-5 years of age.

Transforming higher education and student engagement through collaborative review to inform educational design

This paper reports on staff perceptions arising from a review process designed to assist staff in making informed decisions regarding educational design, approaches to engage students in learning, and the technology to support engagement in the classroom and across multiple locations and delivery modes. The aim of the review process was to transform the level of student engagement in the business faculty of an Australian university. The process took a collaborative approach through consultation with academic staff involved in the design and delivery of the units under review, and included targeted professional development as necessary. An institutional framework that characterises engagement indicator contexts and their attributes facilitated dialog during the review process. This paper reports on a mixed method study that included a survey of participants, and purposeful interviews to evaluate the effectiveness of the process. Although the study identified factors that hindered implementation and operationalization of review recommendations in some instances, study participants were generally of the view that recommendations would enhance student engagement. It is demonstrated that the bottom-up approach described in this paper is consistent with theoretical frameworks for transformational change in teaching and learning and the adoption of innovations.

Mathematical modelling and numerical simulation of phosphine flow during grain fumigation in leaky cylindrical silos

The phosphine distribution in a cylindrical silo containing grain is predicted. A three-dimensional mathematical model, which accounts for multicomponent gas phase transport and the sorption of phosphine into the grain kernel is developed. In addition, a simple model is presented to describe the death of insects within the grain as a function of their exposure to phosphine gas. The proposed model is solved using the commercially available computational fluid dynamics (CFD) software, FLUENT, together with our own C code to customize the solver in order to incorporate the models for sorption and insect extinction. Two types of fumigation delivery are studied, namely, fan- forced from the base of the silo and tablet from the top of the silo. An analysis of the predicted phosphine distribution shows that during fan forced fumigation, the position of the leaky area is very important to the development of the gas flow field and the phosphine distribution in the silo. If the leak is in the lower section of the silo, insects that exist near the top of the silo may not be eradicated. However, the position of a leak does not affect phosphine distribution during tablet fumigation. For such fumigation in a typical silo configuration, phosphine concentrations remain low near the base of the silo. Furthermore, we find that half-life pressure test readings are not an indicator of phosphine distribution during tablet fumigation.

The envelope-based cyclic periodogram

Cyclostationary analysis has proven effective in identifying signal components for diagnostic purposes. A key descriptor in this framework is the cyclic power spectrum, traditionally estimated by the averaged cyclic periodogram and the smoothed cyclic periodogram. A lengthy debate about the best estimator finally found a solution in a cornerstone work by Antoni, who proposed a unified form for the two families, thus allowing a detailed statistical study of their properties. Since then, the focus of cyclostationary research has shifted towards algorithms, in terms of computational efficiency and simplicity of implementation. Traditional algorithms have proven computationally inefficient and the sophisticated "cyclostationary" definition of these estimators slowed their spread in the industry. The only attempt to increase the computational efficiency of cyclostationary estimators is represented by the cyclic modulation spectrum. This indicator exploits the relationship between cyclostationarity and envelope analysis. The link with envelope analysis allows a leap in computational efficiency and provides a "way in" for the understanding by industrial engineers. However, the new estimator lies outside the unified form described above and an unbiased version of the indicator has not been proposed. This paper will therefore extend the analysis of envelope-based estimators of the cyclic spectrum, proposing a new approach to include them in the unified form of cyclostationary estimators. This will enable the definition of a new envelope-based algorithm and the detailed analysis of the properties of the cyclic modulation spectrum. The computational efficiency of envelope-based algorithms will be also discussed quantitatively for the first time in comparison with the averaged cyclic periodogram. Finally, the algorithms will be validated with numerical and experimental examples.

Developing and testing readability measurements for second language learners

This research constructed a readability measurement for French speakers who view English as a second language. It identified the true cognates, which are the similar words from these two languages, as an indicator of the difficulty of an English text for French people. A multilingual lexical resource is used to detect true cognates in text, and Statistical Language Modelling to predict the predict the readability level. The proposed enhanced statistical language model is making a step in the right direction by improving the accuracy of readability predictions for French speakers by up to 10% compared to state of the art approaches. The outcome of this study could accelerate the learning process for French speakers who are studying English. More importantly, this study also benefits the readability estimation research community, presenting an approach and evaluation at sentence level as well as innovating with the use of cognates as a new text feature.

Impact resistance and evaluation of retained strength on geotextiles

Over the last few decades, geotextiles have progressively been incorporated into geotechnical applications, especially in the field of coastal engineering. Geotextile materials often act as separator and a filter layer between rocks laid above and subgrade beneath. This versatile material has gradually substituted traditional granular materials because of its ease of installation, consistent quality and labour costefficiency. However, geotextiles often suffer damage during installation due to high dynamic bulk loading of rock placement. This can degrade geotextiles' mechanical strength. The properties considered in this paper include the impact resistance and retained strength of geotextiles. In general, the greater the impact energy applied to geotextiles, the greater the potential for damage. Results highlight the inadequacy of using index derived values as an indicator to determine geotextile performance on site because test results shows that geotextiles (staple fibre (SF) and continuous filament (CF)) with better mechanical properties did not outperform lower mechanical strength materials. The toughest CF product with a CBR index value of 9696N shows inferior impact resistance compared to SF product with the least CBR strength (2719N) given the same impact energy of 9.02 kJ. Test results also indicated that the reduction of strength for CF materials were much greater (between 20 and 50%) compared to SF materials (between 0 and 5%) when subjected to the same impact energy of 4.52 kJ.