Interactive conference voting

We describe and analyze opinion polling results from interactive voting procedures undertaken before and after presentations during the Outcome Measures in Rheumatoid Arthritis Clinical Trials Conference (OMERACT II) in Ottawa, Canada, June 30-July 2, 1994. The scoring procedure was a matched voting design; when a participant used the same keypad at the beginning and end of voting, change within a participant could be estimated. Participants, experienced in the rheumatic diseases included clinicians, researchers, methodologists, regulators, and representatives of the pharmaceutical industry. Patients under consideration were those with any rheumatic diseases. Questions were constructed to evaluate the change in voting behavior expected from the content of the presentation. Statistically significant and substantively important changes were evident in most questions.

Ultimate limit states design of concrete railway sleepers

The railway industry has been slow to adopt limit states principles in the structural design of concrete sleepers for its tracks, despite the global take up of this form of design for almost every other type of structural element. Concrete sleeper design is still based on limiting stresses but is widely perceived by track engineers to lead to untapped reserves of strength in the sleepers. Limit design is a more rational philosophy, especially where it is based on the ultimate dynamic capacity of the concrete sleepers. The paper describes the development of equations and factors for a limit design methodology for concrete sleepers in flexure using a probabilistic evaluation of sleeper loading. The new method will also permit a cogent, defensible means of establishing the true capacity of the billions of concrete sleepers that are currently in-track around the world, leading to better utilisation of track infrastructure. The paper demonstrates how significant cost savings may be achieved by track owners.

Treatment of cannabis use among people with psychotic disorders : critical review of randomised controlled trials

There is growing and converging evidence that cannabis may be a major risk factor in people with psychotic disorders and prodromal psychotic symptoms. The lack of available pharmacological treatments for cannabis use indicates that psychological interventions should be a high priority, especially among people with psychotic disorders. However, there have been few randomised controlled trials (RCTs) of psychological interventions among this group. In the present study we critically overview RCTs of psychological and pharmacologic interventions among people with psychotic disorders, giving particular attention to those studies which report cannabis use outcomes. We then review data regarding treatment preferences among this group. RCTs of interventions within "real world" mental health systems among adults with severe mental disorders suggest that cannabis use is amenable to treatment in real world settings among people with psychotic disorders. RCTs of manual guided interventions among cannabis users indicate that while brief interventions are associated with reductions in cannabis use, longer interventions may be more effective. Additionally, RCTs reviewed suggest treatment with antipsychotic medication is not associated with a worsening of cannabis cravings or use and may be beneficial. The development of cannabinoid agonist medication may be an effective strategy for cannabis dependence and suitable for people with psychotic disorders. The development of cannabis use interventions for people with psychotic disorders should also consider patients' treatment preferences. Initial results indicate face-to-face interventions focussed on cannabis use may be preferred. Further research investigating the treatment preferences of people with psychotic disorders using cannabis is needed.

Dry powder inhaler formulations : effect of carrier size on the drug dispersion

Background: The size of the carrier influences drug aerosolization from a dry powder inhaler (DPI) formulation. Lactose particles with irregular shape and rough surface in a variety of sizes are additionally used as carriers; however, contradictory reports exist regarding the effect of carrier size on the dispersion of drug. We examined the influence of the spherical particle size of the biodegradable polylactide-co-glycolide (PLGA) carrier on the aerosolization of a model drug, salbutamol sulphate (SS). Methods: Four different sizes (20-150 µm) of polymer carriers were fabricated using solvent evaporation technique and the dispersion of SS from these carriers was measured by a Twin Stage Impinger (TSI). The size and morphological properties of polymer carriers were determined by laser diffraction and SEM, respectively. Results: The FPF was found to increase from 5.6% to 21.3% with increasing carrier sizeup to150 µm. Conclusions: The aerosolization of drug increased linearly with the size of polymer carriers. For a fixed mass of drug particles in a formulation, the mass of drug particles per unit area of carriers is higher in formulations containing the larger carriers, which leads to an increase in the dispersion of drug due to the increased mechanical forces occurred between the carriers and the device walls.

Starter packs : a good start to therapy?

Samples of drugs are often given to doctors by pharmaceutical representatives as part of a marketing strategy. Despite the well described advantages of drug samples, little has been published on the potential adverse outcomes. A series of consumer calls to the Adverse Medicine Events Line has highlighted concerns regarding the quality use of medicines associated with drug samples. The most commonly reported problems were drug samples being supplied to patients with inadequate information regarding dosage, administration, storage and possible adverse effects. In addition, some patients were given excessive quantities of a drug. To reduce such adverse outcomes, the drug industry, health professionals and consumers should be aware of the potential problems associated with starter packs.

Alternatives to the World Bank’s strategies for education and development

Over the past several decades, policy has become increasingly global. In economics, for example, policy has followed the so-called Washington Consensus of privatization, liberalization, and deregulation. In education, global policy has included the proliferation of strategies including standardized testing, paraprofessional teachers, user fees, and privatization. There are many problems with these neoliberal policies. Foremost among them, is the havoc they wreak on the lives of so many children and adults. Poverty, inequality, and myriad associated problems have reached new heights in this neoliberal era. Moreover, these policies have been adopted uncritically and alternative policies have been ignored, which leads to our focus here.

The International Film and Television School in Cuba : for a stronger media culture in the global south

A little-known facet of Cuban internationalism is the Cuba shares in the education of young people who want to help build a stronger media culture that represents voices from the global South. Cuba was instrumental in the establishment and operation of the International Film and Television School at San Antonio de los Baños. The Cuban government provided the location and buildings for the school, and among the range of international media professionals who teach the students are selected Cuban professors from the Institute of the Arts, based n Havana. The International Film and Television School is supported by funding from Spain and other countries, and by the willingness of international media professionals to teach short courses for little more than an honorarium. Cuba used to provide full scholarships for student from the South to study a two-year course in film or television, but now charges fees for its three-year diploma course.

Compounding practices in Queensland : experiences and perceptions of pharmacists and pharmacy students

Background: Changes in the roles of the contemporary pharmacist has seen a decline in the number and variety of extemporaneously compounded dosage forms. Pharmacy curricula reflect this change with a reduction in the emphasis on extemporaneous compounding practice. Aim: To elicit information about extemporaneously compounded dosage forms and perceptions of compounding practice from pharmacists and pharmacy students. Method: Self-administered surveys were mailed to 1063 pharmacists and offered online to 896 pharmacy undergraduates across the 4 years of a Bachelor of Pharmacy program in Queensland. Results: 382 (36%) pharmacists and 455 (51%) students completed the survey. Most pharmacists (96%) reported compounding a product in the 12 months prior to the survey, particularly semi-solids (89%) and liquids (64%) for external use. Most pharmacies (> 96%) owned basic compounding equipment, such as a slab and spatula, mortar and pestle, and cylindrical/conical measures. Half of the pharmacies used mechanical rather than electronic balances. Students expressed greater confidence in their ability to use basic compounding equipment and to perform basic compounding tasks as they progressed through the 4-year degree course. Pharmacists’ views on students’ ability to compound basic products at the end of their degree were generally similar to the proportion of final-year students who reported they could confidently complete the task. Conclusion: Despite a decline in extemporaneously compounded products in community pharmacy, pharmacy graduates need to be competent in compounding techniques.

Faster Monte Carlo simulation of radiotherapy geometries

Using Monte Carlo simulation for radiotherapy dose calculation can provide more accurate results when compared to the analytical methods usually found in modern treatment planning systems, especially in regions with a high degree of inhomogeneity. These more accurate results acquired using Monte Carlo simulation however, often require orders of magnitude more calculation time so as to attain high precision, thereby reducing its utility within the clinical environment. This work aims to improve the utility of Monte Carlo simulation within the clinical environment by developing techniques which enable faster Monte Carlo simulation of radiotherapy geometries. This is achieved principally through the use new high performance computing environments and simpler alternative, yet equivalent representations of complex geometries. Firstly the use of cloud computing technology and it application to radiotherapy dose calculation is demonstrated. As with other super-computer like environments, the time to complete a simulation decreases as 1=n with increasing n cloud based computers performing the calculation in parallel. Unlike traditional super computer infrastructure however, there is no initial outlay of cost, only modest ongoing usage fees; the simulations described in the following are performed using this cloud computing technology. The definition of geometry within the chosen Monte Carlo simulation environment - Geometry & Tracking 4 (GEANT4) in this case - is also addressed in this work. At the simulation implementation level, a new computer aided design interface is presented for use with GEANT4 enabling direct coupling between manufactured parts and their equivalent in the simulation environment, which is of particular importance when defining linear accelerator treatment head geometry. Further, a new technique for navigating tessellated or meshed geometries is described, allowing for up to 3 orders of magnitude performance improvement with the use of tetrahedral meshes in place of complex triangular surface meshes. The technique has application in the definition of both mechanical parts in a geometry as well as patient geometry. Static patient CT datasets like those found in typical radiotherapy treatment plans are often very large and present a significant performance penalty on a Monte Carlo simulation. By extracting the regions of interest in a radiotherapy treatment plan, and representing them in a mesh based form similar to those used in computer aided design, the above mentioned optimisation techniques can be used so as to reduce the time required to navigation the patient geometry in the simulation environment. Results presented in this work show that these equivalent yet much simplified patient geometry representations enable significant performance improvements over simulations that consider raw CT datasets alone. Furthermore, this mesh based representation allows for direct manipulation of the geometry enabling motion augmentation for time dependant dose calculation for example. Finally, an experimental dosimetry technique is described which allows the validation of time dependant Monte Carlo simulation, like the ones made possible by the afore mentioned patient geometry definition. A bespoke organic plastic scintillator dose rate meter is embedded in a gel dosimeter thereby enabling simultaneous 3D dose distribution and dose rate measurement. This work demonstrates the effectiveness of applying alternative and equivalent geometry definitions to complex geometries for the purposes of Monte Carlo simulation performance improvement. Additionally, these alternative geometry definitions allow for manipulations to be performed on otherwise static and rigid geometry.

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

Prescribing practices of Australian dispensing doctors

Background: In response to health workforce shortages policymakers have considered expanding the roles that a health professional may perform. A more traditional combination of health professional roles is that of a dispensing doctor (DD) who routinely prescribes and dispenses pharmaceuticals. A systematic review conducted on mainly overseas DDs’ practices found that DDs tended to prescribe more items per patients, less often generically, and showed poorer adherence to best practice. Convenience for patients was cited by both patients and DDs as the main reason for dispensing. In Australia, rural doctors are allowed to dispense Pharmaceutical Benefit Scheme (PBS) subsidised pharmaceutical benefits if there is no reasonable pharmacy coverage. Little was known about the practices of these Australian DDs. Objectives: To examine the PBS prescribing patterns of dispensing with matched non-dispensing doctors and identify factors that influence prescribing behaviour. Method: A sequential explanatory (QUAN-->qual) mixed methodology was utilised. Firstly, rurality-matched DDs’ and non-DDs’ PBS data for fiscal years 2005-7 were analysed against criteria distilled from a systematic review and stakeholder consultations. Secondly, structured interviews were conducted with a purposive sample of DDs to examine the quantitative findings. Key findings: DDs prescribed significantly fewer PBS prescriptions per patients but used Regulation 24 significantly more than non-DDs. Regulation 24 biased the prescribing data. DDs prescribed proportionally more penicillin type antibiotics, adrenergic inhalants and non-steroidal anti-inflammatories as compared to non-DDs. Reasons offered by DD-respondents highlighted that prescribing was influenced by an awareness of cost to the patients, peer pressure and confidential prescriber feedback provided on a regular basis. Implications: This innovative census study does not support international data that DDs are less judicious in their prescribing. There is some evidence that DDs might reduce health inequity between rural and urban Australian, and that the DD health model is valuable to patients in isolated communities.

Permeability of high-performance concrete incorporating presoaked lightweight aggregates for internal curing

This paper presents an experimental study on the effect of presoaked lightweight aggregates (LWAs) for internal curing on water permeability, water absorption and resistance of concrete to chloride-ion penetration in comparison with those of a control concrete and a concrete with shrinkage reducing admixture (SRA) of similar water/cement ratios (w/c). In general, the concretes with LWA particles had initial water absorption, sorptivity and water permeability similar to or lower than those of the control concrete and the concrete with SRA. The charges passed, chloride migration coefficient and chloride diffusion coefficient of such concretes were in the same order as those of the control concrete and the concrete with SRA. However, the incorporation of the LWAs for internal curing reduced unit weight, compressive strength and elastic modulus of the concrete. Comparing the LWAs of different sizes for internal curing, finer particles were more efficient in reducing the shrinkage and generally resulted in less reduction in the unit weight, compressive strength, and elastic modulus. However, the increase in the more porous crushed LW particles in concrete seems to increase the penetration of chloride ions in the concrete. The concrete with SRA had initial water absorption, sorptivity, water permeability and resistance to chloride ion penetration comparable with those of the control concrete. The use of SRA in concrete does not affect the elastic modulus of the concrete, except for a minor influence on the compressive strength of the concrete.

A systematic review of the literature comparing the practices of dispensing and non-dispensing doctors

Objectives: Some doctors perform the dual roles of prescribing and dispensing pharmaceuticals. The dispensing doctors (DDs) role may give rise to prescribing behaviours that vary from those of non-DDs. The aim of this review was to systematically and comparatively appraise the research evidence related to the practices of DDs. Methods: A systematic search of bibliographic databases and reference lists from selected papers were the sources of the data. Inclusion criteria were papers published in English, between 1970 and 2008 that provided quantitative data comparing the practices of DDs and non-DDs. At least two of the authors abstracted data from all eligible papers using a purpose-made data extraction form. Results: Twenty-one papers were included in this review. Evidence indicated that DDs prescribed more pharmaceutical items and less often generically than non-DDs. There was limited evidence to suggest that DDs prescribed less judiciously and were associated with poor dispensing standards. Patient convenience and access to pharmaceuticals were main reasons for doctors to dispense. Conclusion: DDs can fill an important gap in the provision of pharmaceuticals for their patients especially where health workforce shortages exist. There was evidence the dispensing role influenced prescribing. Patient convenience should be balanced against scarce medical resources, being utilised for dispensing.

Australian dispensing doctors' prescribing : quantitative and qualitative analysis

Objective: To evaluate the prescribing practices of Australian dispensing doctors (DDs) and to explore their interpretations of the findings. Design, participants and setting: Sequential explanatory mixed methods. The quantitative phase comprised analysis of Pharmaceutical Benefits Scheme (PBS) claims data of DDs and non-DDs, 1 July 2005 30 June 2007. The qualitative phase involved semi-structured interviews with DDs in rural and remote general practice across Australian states, August 2009 February 2010. Main outcome measures: The number of PBS prescriptions per 1000 patients and use of Regulation 24 of the National Health (Pharmaceutical Benefits) Regulations 1960 (r. 24); DDs' interpretation of the findings. Results: 72 DDs' and 1080 non-DDs' PBS claims data were analysed quantitatively. DDs issued fewer prescriptions per 1000 patients (9452 v 15057; P = 0.003), even with a similar proportion of concessional patients and patients aged >65 years in their populations. DDs issued significantly more r. 24 prescriptions per 1000 prescriptions than non-DDs (314 v 67; P=0.008). Interviews with 22 DDs explained that the fewer prescriptions were due to perceived expectation from their peers regarding prescribing norms and the need to generate less administrative paperwork in small practices. Conclusions: Contrary to overseas findings, we found no evidence that Australian DDs overprescribed because of their additional dispensing role. MJA 2011; 195: 172-175