Condition monitoring and fault diagnosis of diesel engines using instantaneous angular speed analysis

Continuous monitoring of diesel engine performance is critical for early detection of fault developments in an engine before they materialize into a functional failure. Instantaneous crank angular speed (IAS) analysis is one of a few nonintrusive condition monitoring techniques that can be utilized for such a task. Furthermore, the technique is more suitable for mass industry deployments than other non-intrusive methods such as vibration and acoustic emission techniques due to the low instrumentation cost, smaller data size and robust signal clarity since IAS is not affected by the engine operation noise and noise from the surrounding environment. A combination of IAS and order analysis was employed in this experimental study and the major order component of the IAS spectrum was used for engine loading estimation and fault diagnosis of a four-stroke four-cylinder diesel engine. It was shown that IAS analysis can provide useful information about engine speed variation caused by changing piston momentum and crankshaft acceleration during the engine combustion process. It was also found that the major order component of the IAS spectra directly associated with the engine firing frequency (at twice the mean shaft rotating speed) can be utilized to estimate engine loading condition regardless of whether the engine is operating at healthy condition or with faults. The amplitude of this order component follows a distinctive exponential curve as the loading condition changes. A mathematical relationship was then established in the paper to estimate the engine power output based on the amplitude of this order component of the IAS spectrum. It was further illustrated that IAS technique can be employed for the detection of a simulated exhaust valve fault in this study.

The benefits and challenges of conducting an overview of systematic reviews in public health: a focus on physical activity

Introduction The ultimate aim of Cochrane systematic reviews is to inform policy and practice decisions for better health outcomes. However, due to the increasing numbers of scientific publications, wading through the available evidence of both individual studies and systematic reviews can be challenging and overwhelming even for avid authors and readers. This paper briefly describes the first overview (a systematic review of reviews) of the Cochrane Public Health Group (CPHG) in development and proposes a way forward for the methodologies under consideration.

Assessment of body composition in Indian adults: comparison between dual-energy X-ray absorptiometry and isotope dilution technique

Dual-energy X-ray absorptiometry (DXA) and isotope dilution technique have been used as reference methods to validate the estimates of body composition by simple field techniques; however, very few studies have compared these two methods. We compared the estimates of body composition by DXA and isotope dilution (18O) technique in apparently healthy Indian men and women (aged 19–70 years, n 152, 48 % men) with a wide range of BMI (14–40 kg/m2). Isotopic enrichment was assessed by isotope ratio mass spectroscopy. The agreement between the estimates of body composition measured by the two techniques was assessed by the Bland–Altman method. The mean age and BMI were 37 (SD 15) years and 23·3 (SD 5·1) kg/m2, respectively, for men and 37 (SD 14) years and 24·1 (SD 5·8) kg/m2, respectively, for women. The estimates of fat-free mass were higher by about 7 (95 % CI 6, 9) %, those of fat mass were lower by about 21 (95 % CI 218,223) %, and those of body fat percentage (BF%) were lower by about 7·4 (95 % CI 28·2, 26·6) % as obtained by DXA compared with the isotope dilution technique. The Bland–Altman analysis showed wide limits of agreement that indicated poor agreement between the methods. The bias in the estimates of BF% was higher at the lower values of BF%. Thus, the two commonly used reference methods showed substantial differences in the estimates of body composition with wide limits of agreement. As the estimates of body composition are method-dependent, the two methods cannot be used interchangeably

Space within the surface : the patterned surfaces of Florence Broadhurst and Jim Thompson

The Woods Bagot 2007 refurbishment of the Qantas and British Airways Bangkok Business lounge in the Survarnabhumi Airport features wall finishes designed by wallpaper designer, Florence Broadhurst (1899-1977) and Thai Silk trader, Jim Thompson (1906-1967). This distinctive selection, which is proclaimed on the airport’s website, of patterned wall surfaces side by side draws attention to their striking similarities and their defining differences . Thompson and Broadhurst would appear to be worlds apart, but here in the airport their work brings them together. Thompson, the son of a wealthy cotton family in America, worked as an architect before joining the army. He moved to Bangkok to start The Thai Silk Company in 1948. Broadhurst was born on a farm in Mt. Perry, Queensland. She began her career as a performance artist, as part of an Australian troupe in Shanghai, moving onto pursue a career in fashion design, catering to the middle and upper classes in London. Upon her return to Australia, Broadhurst started a print design company in 1959. Both Broadhurst and Thompson pursued multiple careers, lived many lives, and died under mysterious circumstances. Broadhurst was murdered in 1977 at her Sydney print warehouse, which remains an unsolved crime. Thompson disappeared in Malaysia in 1967 and his body has never been found. This chapter investigates the parallels between Thompson and Broadhurst and what lead them to design such popular patterns for wall surfaces towards the end of their careers. While neither designer was a household name, their work is familiar to most, seen in the costume and set design of films, on the walls of restaurants and cafes and even in family homes. The reason for the popularity of their patterns has not previously been analysed. However, this chapter suggests that the patterns are intriguing because they contain something of their designers’ identities. It suggests that the coloured surface provides a way of camouflaging and hiding its subjects’ histories, such that Broadhurst and Thompson, consciously or unconsciously, used the patterned surface as a plane in which their past lives could be buried. The revealing nature of the stark white wall, compared with the forgiveness provided by the pattern in which to hide, is elaborated by painter and advocate for polychromatic architecture, Fernand Léger in his essay, “The Wall, The Architect, The Painter (1965).” Léger writes that, “the modern architect has gone too far in his magnificent attempts to cleanse through emptiness,” and that the resultant white walls of modernity create ‘an impalpability of air, of slick, brilliant new surfaces where nothing can be hidden any longer …even shadows don’t dare to enter’. To counter the exposure produced by the white wall, Thompson and Broadhurst designed patterned surfaces that could harbour their personal histories. Broadhurst and Thompson’s works share a number of commonalities in their design production, even though their work in print design commenced a decade apart. Both designers opted to work more with traditional methods of pattern making. Broadhurst used hand-operated screens, and Thompson outsourced work to local weavers and refrained from operating out of a factory. Despite humble beginnings, Broadhurst and Thompson enjoyed international success with their wall patterns being featured in a number of renowned international hotels in Bahrain, Singapore, Sydney, and London in the 1970s and 1980s. Their patterns were also transferred to fabric for soft furnishings and clothing. Thompson’s patterns were used for costumes in films including the King and I and Ben Hur. Broadhurst’s patterns were also widely used by fashion designers and artists, such as Akira Isogowa‘s costume design for Salome, a 1998 production by the Sydney Dance Company. Most recently her print designs have been used by skin illustrator Emma Hack, in a series of works painting female bodies into Broadhurst’s patterns. Hack’s works camouflage the models’ bodies into the patterned surface, assimilating subject and surface, hinting at there being something living within the patterned wall. More than four decades after Broadhurst’s murder and five decades since Thompson’s disappearance, their print designs persist as more than just a legacy. They are applied as surface finishes with the same fervour as when the designs were first released. This chapter argues that the reason for the ongoing celebration of their work is that there is the impalpable presence of the creator in the patterns. It suggests that the patterns blur the boundary between subject and surface.

Three dimensional digitisation of plant leaves

Realistic plant models are important for leaf area and plant volume estimation, reconstruction of growth canopies, structure generation of the plant, reconstruction of leaf surfaces and agrichemical spray droplet modelling. This article investigates several different scanning devices for obtaining a three dimensional digitisation of plant leaves with a point cloud resolution of 200-500μm. The devices tested were a Roland mdx-20, Microsoft Kinect, Roland lpx-250, Picoscan and Artec S. The applicability of each of these devices for scanning plant leaves is discussed. The most suitable tested digitisation device for scanning plant leaves is the Artec S scanner.

The importance of good data, analysis and interpretation for showing the economics of reducing healthcare-associated infection

To the Editor—In a recent review article in Infection Control and Hospital Epidemiology, Umscheid et al1 summarized published data on incidence rates of catheter-associated bloodstream infection (CABSI), catheter-associated urinary tract infection (CAUTI), surgical site infection (SSI), and ventilator- associated pneumonia (VAP); estimated how many cases are preventable; and calculated the savings in hospital costs and lives that would result from preventing all preventable cases. Providing these estimates to policy makers, political leaders, and health officials helps to galvanize their support for infection prevention programs. Our concern is that important limitations of the published studies on which Umscheid and colleagues built their findings are incompletely addressed in this review. More attention needs to be drawn to the techniques applied to generate these estimates...

Surface reconstruction of wheat leaf morphology from three-dimensional scanned data

Realistic virtual models of leaf surfaces are important for a number of applications in the plant sciences, such as modelling agrichemical spray droplet movement and spreading on the surface. In this context, the virtual surfaces are required to be sufficiently smooth to facilitate the use of the mathematical equations that govern the motion of the droplet. While an effective approach is to apply discrete smoothing D2-spline algorithms to reconstruct the leaf surfaces from three-dimensional scanned data, difficulties arise when dealing with wheat leaves that tend to twist and bend. To overcome this topological difficulty, we develop a parameterisation technique that rotates and translates the original data, allowing the surface to be fitted using the discrete smoothing D2-spline methods in the new parameter space. Our algorithm uses finite element methods to represent the surface as a linear combination of compactly supported shape functions. Numerical results confirm that the parameterisation, along with the use of discrete smoothing D2-spline techniques, produces realistic virtual representations of wheat leaves.

Contradictions and the Appropriation of ERP Packages

Enterprise Resource Planning (ERP) software typically takes the form of a package that is licensed for use to those in a client organisation and is sold as being able to automate a wide range of processes within organisations. ERP packages have become an important feature of information and communications technology (ICT) infrastructures in organizations. However, a number of highly publicised failures have been associated with the ERP packages too. For example: Hershey, Aero Group and Snap-On have blamed the implementation of ERP packages for negative impacts upon earnings (Scott and Vessey 2000); Cadbury Schweppes implemented plans to fulfil 250 orders where normally they would fulfil 1000 due to the increased complexity and the need to re-train staff post implementation (August 1999) and FoxMeyer drug company’s implementation of an ERP package has been argued to have lead to bankruptcy proceedings resulting in litigation against SAP, the software vendor in question (Bicknell 1998). Some have even rejected a single vendor approach outright (Light et. al. 2001). ERP packages appear to work for some and not for others, they contain contradictions. Indeed, if we start from the position that technologies do not provide their own explanation, then we have to consider the direction of a technological trajectory and why it moves in one way rather than another (Bijker and Law 1994). In other words, ERP appropriation cannot be predetermined as a success, despite the persuasive attempts of vendors via their websites and other marketing channels. Moreover, just because ERP exists, we cannot presume that all will appropriate it in the same fashion, if at all. There is more to the diffusion of innovations than stages of adoption and a simple demarcation between adoption and rejection. The processes that are enacted in appropriation need to be conceptualised as a site of struggle, political and imbued with power (Hislop et. al. 2000; Howcroft and Light, 2006). ERP appropriation and rejection can therefore be seen as a paradoxical phenomenon. In this paper we examine these contradictions as a way to shed light on the presence and role of inconsistencies in ERP appropriation and rejection. We argue that much of the reasoning associated with ERP adoption is pro-innovation biased and that deterministic models of the diffusion of innovations such as Rogers (2003), do not adequately take account of contradictions in the process. Our argument is that a better theoretical understanding of these contradictions is necessary to underpin research and practice in this area. In the next section, we introduce our view of appropriation. Following this is an outline of the idea of contradiction, and the strategies employed to ‘cope’ with this. Then, we introduce a number of reasons for ERP adoption and identify their inherent contradictions using these perspectives. From this discussion, we draw a framework, which illustrates how the interpretive flexibility of reasons to adopt ERP packages leads to contradictions which fuel the enactment of appropriation and rejection.

E-government policies for broadband adoption : the case of the UK Government

Broadband technology has been introduced to the business community and the public as a fast and easy way of exploiting the Internet. The benefits of its use (fast reliable connections, always on) have been widely realised and broadband diffusion is one of the items at the top of the agenda for technology related polices of governments worldwide. Broadband diffusion and capacity development are central to debates in many countries concerning the role of the government in developing efficient broadband policies particularly in terms of the usage of public money. In this paper we examine the impact of government polices to broadband adoption in the case of the UK government, a country that is striving to have the most extensive and competitive broadband market in the G7 by 2005. We analyse specific institutional actions related to IT diffusion as pursued by the government with the view to identify best practices in government intervention. We believe that are our analysis is useful for broadband strategies in particular and technology in general when applied elsewhere.

An alternative theory of legacy information systems

Organisational dependence upon IT continues to grow yet experiences of satisfaction vary widely. Problematic, aged IT is often cited as being a fundamental problem in this respect and this is commonly termed legacy information systems. However, in this paper the author offers an alternative, and arguably more comprehensive, theory of legacy information systems that accommodates multiple viewpoints and recognises its inherent dynamism. The paper suggests a theory of legacy information systems that comprises of the concepts of temporal effects, interpretations and characteristics. It is argued that legacy information systems are constructed of many ‘legacies’ that are handed down continuously, forming an amorphous set of sociotechnical interdependencies and relationships.

More than just friends? Facebook, disclosive ethics and the morality of technology

Social networking sites have become increasingly popular destinations for people wishing to chat, play games, make new friends or simply stay in touch. Furthermore, many organizations have been quick to grasp the potential they offer for marketing, recruitment and economic activities. Nevertheless, counterclaims depict such spaces as arenas where deception, social grooming and the posting of defamatory content flourish. Much research in this area has focused on the ends to which people deploy the technology, and the consequences arising, with a view to making policy recommendations and ethical interventions. In this paper, we argue that tracing where morality lies is more complex than these efforts suggest. Using the case of a popular social networking site, and concepts about the morality of technology, we disclose the ethics of Facebook as diffuse and multiple. In our conclusions we provide some reflections on the possibilities for action in light of this disclosure.

Best of breed IT strategy: an alternative to enterprise resource planning systems

Abstract - Enterprise Resource Planning (ERP) software has become the dominant strategic platform for supporting enterprise-wide business processes. However, single vendor ERP software systems have been criticised for not meeting specific organisation and industry requirements. An alternative approach ‘Best of Breed (BoB)’, integrates components of software from multiple standard package vendors, and in some cases custom components. The objective is to develop enterprise systems that are more closely aligned with the requirements of an organisation. Although this approach may not be common at present it is likely to grow in importance due to business needs and technology advances such as the componentisation of ERP software. A case study analysis of a BoB implementation at a global entertainment's company is used as a platform for the discussion of the issues associated with this strategy and a comparison is made with the single vendor ERP alternative. The analysis centres on the complexity of implementation, the differences in the levels of functionality and business fit and the maintenance requirements.