Qaphqa : fresh cut 2013 Part 1

'Qaphqa' was an outdoor artwork exhibited in the forecourt of Brisbane’s Institute of Modern Art as part of Fresh Cut exhibition series. The work took the form of a three-storey-high series of stacked 'outhouses', the seat of each opening onto the cubicle below to form what the artist referred to as a 'long drop'. Assembled in untreated pine and plywood and festooned with mock-medieval ensigns and flags, the work included a flyer containing a poem by Jorge Luis Borges and was accompanied by a published catalogue.

The 'gourmet' sausage factory: Keeping it human

Whilst tertiary institutions continue to invest heavily in the technological aspects of online Teaching & Learning (T&L), there does not appear to have been a commensurate investment in the “human” aspects of the use of the technology. Despite the broad recognition that teaching and learning materials need to be adapted for and to the onscreen medium, little attention appears to have been paid thus far to the actual people who are delivering it – who equally need to “adapt themselves” to that medium, in order to maximise the benefit of the technology by maximising the human communication skills of those using the online medium – as distinct from the technical skills required to drive and deliver the bits and bytes. The REdelivery Initiative was a direct response to that notion. This paper details – by way of a narrative of one of the workshop participants – that part of the process involving the professional development of academics specifically in and specifically for the digital, online, T&L context, in order to both illuminate and maximise the potential and opportunities afforded by the technology.

Fresh Cuttings: A Celebration of Fiction and Poetry from UQP's Black Writing Series

As the first anthology of UQP's indigenous-authored books, Fresh Cuttings represents the very best of fiction and poetry publishing from UQP's Black Australian Writing series. An introduction by the editors and a biography of each author is included.

The commodification and exploitation of fresh water: Property, human rights and green criminology

In recent years, both developing and industrialised societies have experienced riots and civil unrest over the corporate exploitation of fresh water. Water conflicts increase as water scarcity rises and the unsustainable use of fresh water will continue to have profound implications for sustainable development and the realisation of human rights. Rather than states adopting more costly water conservation strategies or implementing efficient water technologies, corporations are exploiting natural resources in what has been described as the “privatization of water”. By using legal doctrines, states and corporations construct fresh water sources as something that can be owned or leased. For some regions, the privatization of water has enabled corporations and corrupt states to exploit a fundamental human right. Arguing that such matters are of relevance to criminology, which should be concerned with fundamental environmental and human rights, this article adopts a green criminological perspective and draws upon Treadmill of Production theory.

Fresh thinking in services marketing: Contemporary, cutting-edge and creative thoughts

Purpose The purpose of this paper is to highlight and promote fresh thinking in services marketing research. Design/methodology/approach The topic of the special issue was deliberately chosen to encourage fresh ideas and concepts that will move the discipline forward. The accepted papers have been categorised for ease and convenience of reading by scholars and practitioners, with a short commentary on each category. Findings There is a wealth of forward-thinking by service(s) marketing researchers that bodes well for the future of the sub-discipline. Research limitations/implications The special issue does not address fresh thinking in all areas of services marketing research. Other potential areas for fresh thinking are identified. Originality/value New thinking in a scholarly field is necessary to propel the discipline forward.

Reinforcing stigma or delivering a fresh start: Bankruptcy and future engagement in the workforce

In Australia, bankruptcy retains a social stigma, as is often seen as a personal failing, and an indication that the individual cannot be trusted to meet their obligations. Official labelling and informal labelling reinforce this stigmatisation of bankruptcy in employment and business contexts. This occurs through legislation and policy that imposes restrictions on participation in some occupations on the grounds of bankruptcy, and imposes obligations on persons to disclose their bankruptcy to their employer. These restrictions and obligations that are varying in length and extent, both within industries and professions and across industries and professions, and appear to lack a coherent policy justification. Further, informal labelling is facilitated by the law providing for a permanent, publicly accessible record of bankruptcy, and failing to restrict the use of bankruptcy information in employment and business decision-making. This stigmatisation of bankruptcy inhibits the fresh start objective of bankruptcy, and is not supported by a strong correlation between bankruptcy and negative personal or other attributes. This article therefore argues that a review is needed to determine the circumstances in which there is a genuine policy justification for employment restrictions, and the appropriate length and scope of such restrictions. Reform of the Bankruptcy Act should also be considered. Possible areas for law reform including reducing the minimum period of bankruptcy; removing the permanency and/or public accessibility of the bankruptcy record; revising the language used in the Bankruptcy Act; and introducing a prohibition or restriction on the ability of employers to use bankruptcy status in employment decision making. Such changes would promote the fresh start objective of Australia’s bankruptcy system, and increase the likelihood that bankruptcy does not unfairly inhibit an individual’s ability to engage as an economic actor in Australian society and thereby improve their financial well-being.

Expecting the unexpected: Kathryn Kelly : La Boite Indie Fresh Ground

Compare your last night of theatre with your first. Like internet dating, the consummation is the same, but the rules of engagement have changed. A decade of ‘independent seasons’ nested within our mainstages has littered the moat-like foyers of our state-funded theatres with couches, reshaped their intractable prosceniums into new configurations and collapsed many of the traditional artform hierarchies.

Growth of boehmite nanofibers by assembling nanoparticles with surfactant micelles

It is known that boehmite (AlOOH) nanofibers formed in the presence of nonionic poly(ethylene oxide) (PEO) surfactant at 373 K. A novel approach is proposed in this study for the growth of the boehmite nanofibers: when fresh aluminum hydrate precipitate was added at regular interval to initial mixture of boehmite and PEO surfactant at 373 K, the nanofibers grow from 40 to 50 nm long to over 100 nm. It is believed that the surfactant micelles play an important role in the nanofiber growth: directing the assembly of aluminum hydrate particles through hydrogen bonding with the hydroxyls on the surface of aluminum hydrate particles. Meanwhile a gradual improvement in the crystallinity of the fibers during growth is observed and attributed to the Ostwald ripening process. This approach allows us to precisely control the size and morphology of boehmite nanofibers using soft chemical methods and could be useful for low temperature, aqueous syntheses of other oxide nanomaterials with tailorable structural specificity such as size, dimension and morphology.

How can land and urban development make houses healthier?

Traditionally, the main focus of the professional community involved with indoor air quality has been indoor pollution sources, preventing or reducing their emissions, as well as lowering the impact of the sources by replacing the polluted indoor air with "fresh" outdoor air. However, urban outdoor air cannot often be considered "fresh", as it contains high concentrations of pollutants emitted from motor vehicles - the main outdoor pollution sources in cities. Evidence from epidemiological studies conducted worldwide demonstrates that outdoor air quality has considerable effects on human health, despite the fact that people spend the majority of their time indoors. This is because pollution from outdoors penetrates indoors and becomes a major constituent of indoor pollution. Urban land and transport development has significant impact on the overall air quality of the urban airshed as well as the pollution concentration in the vicinity of high-density traffic areas. Therefore, an overall improvement in indoor air quality would be achieved by lowering urban airshed pollution, as well as by lowering the impact of the hot spots on indoor air. This paper explores the elements of urban land and vehicle transport developments, their impact on global and local air quality, and how the science of outdoor pollution generation and transport in the air could be utilized in urban development towards lowering indoor air pollution.

A Preliminary Assessment of Aqueous Ethanol Pulping of Bagasse: the Ecopulp Process

SRI has examined the organosolv (organic solvation) pulping of Australian bagasse using technology supplied by Ecopulp. In the process, bagasse is reacted with aqueous ethanol in a digester at elevated temperatures (between 150ºC and 200ºC). The products from the digester are separated using proprietary technology before further processing into a range of saleable products. Test trials were undertaken using two batch digesters; the first capable of pulping about 25 g of wet depithed bagasse and the second, larger samples of about 1.5 kg of wet depithed bagasse. From this study, the unbleached pulp produced from fresh bagasse did not have very good strength properties for the production of corrugated medium for cartons and bleached pulp. In particular, the lignin contents as indicated by the Kappa number for the unbleached pulps are high for making bleached pulp. However, in spite of the high lignin content, it is possible to bleach the pulp to acceptable levels of brightness up to 86.6% ISO. The economics were assessed for three tier pricing (namely low, medium and high price). The economic return for a plant that produces 100 air dry t/d of brownstock pulp is satisfactory for both high and medium pricing levels of pricing. The outcomes from the project justify that work should continue through to either pilot plant or upgraded laboratory facility.

Long-term trends in fine particle number concentrations in the urban atmosphere of Brisbane : the relevance of traffic emissions and new particle formation

The measurement of submicrometre (< 1.0 m) and ultrafine particles (diameter < 0.1 m) number concentration have attracted attention since the last decade because the potential health impacts associated with exposure to these particles can be more significant than those due to exposure to larger particles. At present, ultrafine particles are not regularly monitored and they are yet to be incorporated into air quality monitoring programs. As a result, very few studies have analysed their long-term and spatial variations in ultrafine particle concentration, and none have been in Australia. To address this gap in scientific knowledge, the aim of this research was to investigate the long-term trends and seasonal variations in particle number concentrations in Brisbane, Australia. Data collected over a five-year period were analysed using weighted regression models. Monthly mean concentrations in the morning (6:00-10:00) and the afternoon (16:00-19:00) were plotted against time in months, using the monthly variance as the weights. During the five-year period, submicrometre and ultrafine particle concentrations increased in the morning by 105.7% and 81.5% respectively whereas in the afternoon there was no significant trend. The morning concentrations were associated with fresh traffic emissions and the afternoon concentrations with the background. The statistical tests applied to the seasonal models, on the other hand, indicated that there was no seasonal component. The spatial variation in size distribution in a large urban area was investigated using particle number size distribution data collected at nine different locations during different campaigns. The size distributions were represented by the modal structures and cumulative size distributions. Particle number peaked at around 30 nm, except at an isolated site dominated by diesel trucks, where the particle number peaked at around 60 nm. It was found that ultrafine particles contributed to 82%-90% of the total particle number. At the sites dominated by petrol vehicles, nanoparticles (< 50 nm) contributed 60%-70% of the total particle number, and at the site dominated by diesel trucks they contributed 50%. Although the sampling campaigns took place during different seasons and were of varying duration these variations did not have an effect on the particle size distributions. The results suggested that the distributions were rather affected by differences in traffic composition and distance to the road. To investigate the occurrence of nucleation events, that is, secondary particle formation from gaseous precursors, particle size distribution data collected over a 13 month period during 5 different campaigns were analysed. The study area was a complex urban environment influenced by anthropogenic and natural sources. The study introduced a new application of time series differencing for the identification of nucleation events. To evaluate the conditions favourable to nucleation, the meteorological conditions and gaseous concentrations prior to and during nucleation events were recorded. Gaseous concentrations did not exhibit a clear pattern of change in concentration. It was also found that nucleation was associated with sea breeze and long-range transport. The implications of this finding are that whilst vehicles are the most important source of ultrafine particles, sea breeze and aged gaseous emissions play a more important role in secondary particle formation in the study area.

From literacy to multiliteracies : diverse learners and pedagogical practice

In this paper, we provide specific examples of the educational promises and problems that arise as multiliteracies pedagogical initiatives encounter conventional institutional beliefs and practices in mainstream schooling. This paper documents and characterizes the ways in which two specific digital learning initiatives were played out in two distinctive traditional schooling contexts, as experienced by two different student groups: one comprising an elite mainstream and the other an excluded minority. By learning from the instructive complications that arose out of attempts by innovative and well-meaning educators to provide students with more relevant learning experiences than currently exist in mainstream schooling, this paper contributes fresh perspectives and more nuanced understandings of how diverse learners and their teachers negotiate the opportunities and challenges of the New London Group's vision of a multiliteracies approach to literacy and learning. We conclude by arguing that, where multiliteracies are understood as “garnish” to the “pedagogical roast” of traditional code-based and print-based academic literacies, they will continue to work on the sidelines of mainstream schooling and be seen only as either useful extensions or helpful interventions for high-performing and at-risk students respectively.

The IMC concept meets political marketing : building brand relationships

There is a need to take a fresh look at the traditional application of the marketing concept to political marketing. As many businesses have learned, Integrated Marketing Communications (IMC) practices and principles will help them to build customer relationships and profitable brands. Political marketing must also change with the times and implement IMC practices toward building and nourishing brand relationships with voters and other important stakeholders. The nature of the contribution of this paper is the identification of a gap in the political marketing literature - the stagnation of political marketing at the 4P's marketing concept, and to play a role in the future development of political marketing. In recent developments, it is seen that there is a gradual movement away from this traditional marketing theory. There are a growing number of academics who have approached very closely to the IMC concept or aspects of it, but have not however embraced or have been reluctant to, the prospect of applying it to political marketing. IMC is a practical, logical and ultimately inevitable future for political marketing.

Improved cryptanalysis of the Common Scrambling Algorithm Stream Cipher

This paper provides a fresh analysis of the widely-used Common Scrambling Algorithm Stream Cipher (CSA-SC). Firstly, a new representation of CSA-SC with a state size of only 89 bits is given, a significant reduction from the 103 bit state of a previous CSA-SC representation. Analysis of this 89-bit representation demonstrates that the basis of a previous guess-and-determine attack is flawed. Correcting this flaw increases the complexity of that attack so that it is worse than exhaustive key search. Although that attack is not feasible, the reduced state size of our representation makes it obvious that CSA-SC is vulnerable to several generic attacks, for which feasible parameters are given.

Validation of 3D models of the outer and inner surfaces of an ovine femur

The validation of Computed Tomography (CT) based 3D models takes an integral part in studies involving 3D models of bones. This is of particular importance when such models are used for Finite Element studies. The validation of 3D models typically involves the generation of a reference model representing the bones outer surface. Several different devices have been utilised for digitising a bone’s outer surface such as mechanical 3D digitising arms, mechanical 3D contact scanners, electro-magnetic tracking devices and 3D laser scanners. However, none of these devices is capable of digitising a bone’s internal surfaces, such as the medullary canal of a long bone. Therefore, this study investigated the use of a 3D contact scanner, in conjunction with a microCT scanner, for generating a reference standard for validating the internal and external surfaces of a CT based 3D model of an ovine femur. One fresh ovine limb was scanned using a clinical CT scanner (Phillips, Brilliance 64) with a pixel size of 0.4 mm2 and slice spacing of 0.5 mm. Then the limb was dissected to obtain the soft tissue free bone while care was taken to protect the bone’s surface. A desktop mechanical 3D contact scanner (Roland DG Corporation, MDX 20, Japan) was used to digitise the surface of the denuded bone. The scanner was used with the resolution of 0.3 × 0.3 × 0.025 mm. The digitised surfaces were reconstructed into a 3D model using reverse engineering techniques in Rapidform (Inus Technology, Korea). After digitisation, the distal and proximal parts of the bone were removed such that the shaft could be scanned with a microCT (µCT40, Scanco Medical, Switzerland) scanner. The shaft, with the bone marrow removed, was immersed in water and scanned with a voxel size of 0.03 mm3. The bone contours were extracted from the image data utilising the Canny edge filter in Matlab (The Mathswork).. The extracted bone contours were reconstructed into 3D models using Amira 5.1 (Visage Imaging, Germany). The 3D models of the bone’s outer surface reconstructed from CT and microCT data were compared against the 3D model generated using the contact scanner. The 3D model of the inner canal reconstructed from the microCT data was compared against the 3D models reconstructed from the clinical CT scanner data. The disparity between the surface geometries of two models was calculated in Rapidform and recorded as average distance with standard deviation. The comparison of the 3D model of the whole bone generated from the clinical CT data with the reference model generated a mean error of 0.19±0.16 mm while the shaft was more accurate(0.08±0.06 mm) than the proximal (0.26±0.18 mm) and distal (0.22±0.16 mm) parts. The comparison between the outer 3D model generated from the microCT data and the contact scanner model generated a mean error of 0.10±0.03 mm indicating that the microCT generated models are sufficiently accurate for validation of 3D models generated from other methods. The comparison of the inner models generated from microCT data with that of clinical CT data generated an error of 0.09±0.07 mm Utilising a mechanical contact scanner in conjunction with a microCT scanner enabled to validate the outer surface of a CT based 3D model of an ovine femur as well as the surface of the model’s medullary canal.