A pilot study on the effect of indoor particle sources on indoor particle concentration in residential houses

Characterization of indoor particle sources from 14 residential houses in Brisbane, Australia, was performed. The approximation of PM2.5 and the submicrometre particle number concentrations were measured simultaneously for more than 48 h in the kitchen of all the houses by using a photometer (DustTrak) and a condensation particle counter (CPC), respectively. From the real time indoor particle concentration data and a diary of indoor activities, the indoor particle sources were identified. The study found that among the indoor activities recorded in this study, frying, grilling, stove use, toasting, cooking pizza, smoking, candle vaporizing eucalyptus oil and fan heater use, could elevate the indoor particle number concentration levels by more than five times. The indoor approximation of PM2.5 concentrations could be close to 90 times, 30 times and three times higher than the background levels during grilling, frying and smoking, respectively.

Indoor exposure to submicrometer particles and PM2.5 in residential houses in Brisbane, Australia

As part of a large study investigating indoor air in residential houses in Brisbane, Australia, the purpose of this work was to quantify indoor exposure to submicrometer particles and PM2.5 for the inhabitants of 14 houses. Particle concentrations were measured simultaneously for more than 48 hours in the kitchens of all the houses by using a condensation particle counter (CPC) and a photometer (DustTrak). The occupants of the houses were asked to fill in a diary, noting the time and duration of any activity occurring throughout the house during measurement, as well as their presence or absence from home. From the time series concentration data and the information about indoor activities, exposure to the inhabitants of the houses was calculated for the entire time they spent at home as well as during indoor activities resulting in particle generation. The results show that the highest median concentration level occurred during cooking periods for both particle number concentration (47.5´103 particles cm-3) and PM2.5 concentration (13.4 mg m-3). The highest residential exposure period was the sleeping period for both particle number exposure (31%) and PM2.5 exposure (45.6%). The percentage of the average residential particle exposure level in total 24h particle exposure level was approximating 70% for both particle number and PM2.5 exposure.

Energy efficient multi storey residential developments

Worldwide, the current pattern of urban development is unsustainable and metropolitan planning and development strategies deliver poor environmental outcomes in relation to energy production. As a result, an increasing number of governments and private sector development companies are initiating projects that aim to deliver enhanced environmental outcomes rather than a ‘business as usual’ approach. This paper will summarise the findings from a study that explored the link between building orientation and energy efficiencies in sub-tropical and tropical climates. The study used a new thermal modelling software tool developed by CSIRO that responds more accurately to residential heating and cooling energy performance in those climate zones. This software tool responds to industry criticisms regarding cold climate modelling systems that do not make sufficient allowance for natural ventilation. The study examined a range of low, medium and high-density dwelling types and investigated the impact of orientation, insulation, ventilation and shading devices on energy efficiencies. This paper will examine the findings from the medium and high-density case study developments as these are relevant to residential developments in many South East Asian countries, such as Singapore, Hong Kong and Malaysia. Finally, the paper will explore the potential benefits that medium and high-density residential developments have in the development of ‘solar cities’ and ‘solar suburbs’.

Best Practice Guide : Generic Overview

The construction industry is a key national economic component. It tends to be at the forefront of cyclic changes in the Australian economy. It has a significant impact, both directly and indirectly, on the efficiency and productivity of other industries. Moreover it affects everyone to a greater or lesser extent; through its products whether they are manifested in the physical infrastructure that supports the operation of the economy or through the built environment that directly impacts on the quality of life experienced by individuals. In financial terms the industry makes one of the largest contributions to the Australian economy, accounting for 4.7 per cent of GDP 1 which was worth over $30B in 20012. The construction industry is comprised of a myriad of small firms, across several important sectors including, o Residential building, o Commercial building, o Building services, o Engineering, o Infrastructure o Facilities Management o Property Development Each sector is typified by firms that have distinctive characteristics such as the number of employees, size and value of contracts, number of jobs, and so forth. It tends to be the case that firms operating in commercial building are larger than those involved in residential construction. The largest contractors are found in engineering and infrastructure, as well as in the commercial building sub-sectors. However all sectors are characterised by their reliance upon sub-contractors to carry out on-site operations. Professionals from the various design consultant groups operate across all of these sectors. This description masks one of the most significant underlying causes of inefficiency in the construction industry, namely its fragmentation. The Construction Industry chapter of the 2004 Australian Year Book3, published by the Australian Bureau of Statistics unmasks the industry’s fragmented structure, typified by the large number of operating businesses within it, the vast majority of which are small companies employing less than 5 people. It identifies over 190,000 firms, of which over 90 percent employ less than 5 people. At the other end of the spectrum, firms employing 20 or more people account for fractionally more than one percent of businesses in the industry.

Assessing the impact of streetscape on residential property in lower to middle socio-economic areas

A number of factors have been shown to influence residential property prices in various locations. Studies have identified the importance of location in relation to services, transport and proximity to negative factors such as power lines and cell phone towers. Often the socio-economic status of a residential precinct can determine the overall quality and nature of the streetscapes in that area, with higher value suburbs or locations offering a better visual appearance compared to areas where these factors are not present. However, does the same value for a good streetscape apply in lower socio-economic areas or a buyers more motivated by less aesthetic factors such as size of the house, construction materials or land size. This paper analyses specific streets in a lower to middle socio-economic suburb of Christchurch New Zealand to determine if the location of a house in a street with good streetscape appeal has greater value, investment performance and saleability compared to adjoining streets with less aesthetic appeal.

Public awareness of ‘green’ residential property – an empirical survey based on data from New Zealand and Germany

Over the last few years more stringent environmental laws (e.g. the German “Energie¬ein-sparverordnung ENEV” - Energy Performance of Buildings Directive) and soaring energy prices has increased the need for the real estate industry to react and participate in overall energy reduction through efficient house construction and design, as well as upgrading the existing housing stock to be more energy efficient. Therefore the Property Economics Group at Queensland University of Technology in Australia and Nuertingen-Geislingen University in Germany are carrying out research in relation to sustainable housing construction and public awareness of “green” residential property. Part of this research is to gain an understanding of the level of knowledge and importance of these issues to the house buyer and to determine the importance of sustainable housing to the general public. The paper compares data from two different empirical studies; one of studies analyzes the situation in New Zealand, the other is focused on Germany.

CSI Lincoln : an investigation into a declining housing market

The residential property market in New Zealand has been experiencing a boom and bubble period from 2001 through to mid 2007. Following a number of increases in the Official Cash Rate by the Reserve Bank and a decline in net migration numbers the housing market was perceived to be over inflated and due for a major correction. Numerous media, Government Departments, property experts and economists have been predicting significant reductions in the median price of residential property throughout New Zealand. This paper will analyse house prices in specific socio-economic locations within Christchurch over the past 12 months to determine how significant the current housing decline is. This study will review the change in residential property prices, variations in property listings since April 2008, sale volumes and days on the market across a range of housing sectors to determine the extent and range of any residential property downturn in the NZ recession.

The impact of property title type on residential property returns

Residential property in New Zealand comprises both freestanding residential properties and medium to high density residential properties. Medium to high density residential property comprises the typical units, townhouses and semi-detached houses common in most residential property markets. However, in many of the larger cities of New Zealand the free standing residential property market has evolved into two separate markets being freehold residential property and cross lease residential property. Cross leases have developed as a form of infill housing to reduce the urban sprawl in major canters, while reducing the time and cost for residential property developers. A cross lease is created when an existing freestanding residential property subdivides a portion of the existing land for the erection of another house on the original title, basically dividing one larger residential section into two smaller residential blocks. This paper will analyse house prices in Christchurch over the period 1992 to 2006 to determine if the various housing markets have shown similar capital returns or if there is a specific preference for a particular residential property title.

The impact of natural disasters on residential property markets

Over the past ten years various residential property markets throughout Australia in general and NSW in particular have been subject to substantial natural disasters. These occurrences have included floods, bushfires and hailstorms. In extreme cases the actual rectification costs have been up to AUD$1.5 billion, which occurred with the severe hailstorm in Sydney in April 1999 and cyclone Tracey in Darwin in 1974. Natural disasters such as severe storms and hailstorms have tended to be very indiscriminate in relation to frequency and the actual location of damage, whereas the nature of bushfire and flooding tends to be more defined. Although these extreme natural disasters tend to be infrequent, occurrences of floods and bushfires in residential property areas are more frequent, particularly as urban sprawl encroaches closer to national Parks, State recreation Parks and State forests. Considerable work has been carried out on flood effects on property markets by Bell (1999), Donnelly (1988), McClusky and Rausser (2001), Skrantz and Strickland (1987) in the US, and Chou and Shih (2001) in Taiwan. Fibbens (1994), Lambley and Cordery (1991) and Eves (1999, 2001, 2002) have carried out studies in relation to the effect of flooding on residential property values in the Sydney region, including the tracking of flood prone property values over time. However, no similar rigorous research has been carried out in relation to the impact of bushfires on residential property markets in the Sydney region.

The true cost and performance of individual residential property investment and the implication on real estate agency practice

Investment in residential property in Australia is not dominated by the major investment institutions in to the same degree as the commercial, industrial and retail property markets. As at December 2001, the Property Council of Australia Investment Performance Index contained residential property with a total value of $235 million, which represents only 0.3% of the total PCA Performance Index value. The majority of investment in the Australian residential property market is by small investment companies and individual investors. The limited exposure of residential property in the institutional investment portfolios has also limited the research that has been undertaken in relation to residential property performance. However the importance of individual investment in residential property is continuing to gain importance as both individuals are now taking control of their own superannuation portfolios and the various State Governments of Australia are decreasing their involvement in the construction of public housing by subsidizing low-income families into the private residential property market. This paper will: • Provide a comparison of the cost to initially purchase residential property in the various capital city residential property markets in Australia, and • Analyse the true cost and investment performance of residential property in the main residential property markets in Australia based on a standard investment portfolio in each of the State capital cities and relate these results to real estate marketing and agency practice.